* [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
@ 2018-09-13 18:12 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2018-09-13 18:12 UTC (permalink / raw)
To: linux-arm-kernel
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi at e0006000/eeprom at 0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi at e0007000/flash at 0: SPI bus unit address format error, expected "1"
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm/boot/dts/zynq-zc702.dts | 12 ++++++------
arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a0..27cd6cb52f1b 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon at 52 {
+ hwmon at 34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon at 53 {
+ hwmon at 35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon at 54 {
+ hwmon at 36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421f..0dd352289a45 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash at 0 {
+ flash at 1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2..4ae2c85df3a0 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom at 0 {
+ eeprom: eeprom at 2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
@ 2018-09-13 18:12 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2018-09-13 18:12 UTC (permalink / raw)
To: devicetree, linux-arm-kernel; +Cc: Michal Simek
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1"
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm/boot/dts/zynq-zc702.dts | 12 ++++++------
arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a0..27cd6cb52f1b 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon@52 {
+ hwmon@34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon@53 {
+ hwmon@35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon@54 {
+ hwmon@36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421f..0dd352289a45 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash@0 {
+ flash@1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2..4ae2c85df3a0 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom@0 {
+ eeprom: eeprom@2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
2018-09-13 18:12 ` Rob Herring
@ 2018-09-18 10:52 ` Michal Simek
-1 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2018-09-18 10:52 UTC (permalink / raw)
To: linux-arm-kernel
On 13.9.2018 20:12, Rob Herring wrote:
> dtc has new checks for I2C and SPI buses. Fix the warnings in node names
> and unit-addresses.
>
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 52: I2C bus unit address format error, expected "34"
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 53: I2C bus unit address format error, expected "35"
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c at e0004000/i2c-mux at 74/i2c at 7/hwmon at 54: I2C bus unit address format error, expected "36"
> arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi at e0006000/eeprom at 0: SPI bus unit address format error, expected "2"
> arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi at e0007000/flash at 0: SPI bus unit address format error, expected "1"
>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Please apply to the sub-arch tree. The dtc changes haven't landed, but
> will for 4.20.
>
> arch/arm/boot/dts/zynq-zc702.dts | 12 ++++++------
> arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
> arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
> 3 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index cc5a3dc2b4a0..27cd6cb52f1b 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
> @@ -174,17 +174,17 @@
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <7>;
> - hwmon at 52 {
> + hwmon at 34 {
> compatible = "ti,ucd9248";
> - reg = <52>;
> + reg = <0x34>;
> };
> - hwmon at 53 {
> + hwmon at 35 {
> compatible = "ti,ucd9248";
> - reg = <53>;
> + reg = <0x35>;
> };
> - hwmon at 54 {
> + hwmon at 36 {
> compatible = "ti,ucd9248";
> - reg = <54>;
> + reg = <0x36>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
> index 0e1bfdd3421f..0dd352289a45 100644
> --- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
> +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
> @@ -68,7 +68,7 @@
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> - flash at 0 {
> + flash at 1 {
> compatible = "sst25wf080", "jedec,spi-nor";
> reg = <1>;
> spi-max-frequency = <1000000>;
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> index 651913f1afa2..4ae2c85df3a0 100644
> --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
> +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> @@ -62,7 +62,7 @@
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> - eeprom: eeprom at 0 {
> + eeprom: eeprom at 2 {
> at25,byte-len = <8192>;
> at25,addr-mode = <2>;
> at25,page-size = <32>;
>
Applied. All checked.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
@ 2018-09-18 10:52 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2018-09-18 10:52 UTC (permalink / raw)
To: Rob Herring, devicetree, linux-arm-kernel; +Cc: Michal Simek
On 13.9.2018 20:12, Rob Herring wrote:
> dtc has new checks for I2C and SPI buses. Fix the warnings in node names
> and unit-addresses.
>
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
> arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
> arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2"
> arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1"
>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Please apply to the sub-arch tree. The dtc changes haven't landed, but
> will for 4.20.
>
> arch/arm/boot/dts/zynq-zc702.dts | 12 ++++++------
> arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
> arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
> 3 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> index cc5a3dc2b4a0..27cd6cb52f1b 100644
> --- a/arch/arm/boot/dts/zynq-zc702.dts
> +++ b/arch/arm/boot/dts/zynq-zc702.dts
> @@ -174,17 +174,17 @@
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <7>;
> - hwmon@52 {
> + hwmon@34 {
> compatible = "ti,ucd9248";
> - reg = <52>;
> + reg = <0x34>;
> };
> - hwmon@53 {
> + hwmon@35 {
> compatible = "ti,ucd9248";
> - reg = <53>;
> + reg = <0x35>;
> };
> - hwmon@54 {
> + hwmon@36 {
> compatible = "ti,ucd9248";
> - reg = <54>;
> + reg = <0x36>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
> index 0e1bfdd3421f..0dd352289a45 100644
> --- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
> +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
> @@ -68,7 +68,7 @@
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> - flash@0 {
> + flash@1 {
> compatible = "sst25wf080", "jedec,spi-nor";
> reg = <1>;
> spi-max-frequency = <1000000>;
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> index 651913f1afa2..4ae2c85df3a0 100644
> --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
> +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> @@ -62,7 +62,7 @@
> status = "okay";
> num-cs = <4>;
> is-decoded-cs = <0>;
> - eeprom: eeprom@0 {
> + eeprom: eeprom@2 {
> at25,byte-len = <8192>;
> at25,addr-mode = <2>;
> at25,page-size = <32>;
>
Applied. All checked.
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
@ 2019-12-16 0:22 Florian Klink
0 siblings, 0 replies; 5+ messages in thread
From: Florian Klink @ 2019-12-16 0:22 UTC (permalink / raw)
To: u-boot
Ported over from https://patchwork.kernel.org/patch/10599941/
Signed-off-by: Florian Klink <flokli@flokli.de>
---
arch/arm/dts/zynq-zc702.dts | 12 ++++++------
arch/arm/dts/zynq-zc770-xm010.dts | 2 +-
arch/arm/dts/zynq-zc770-xm013.dts | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index d10695740f..b043d341d6 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -181,17 +181,17 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon at 52 {
+ hwmon at 34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon at 53 {
+ hwmon at 35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon at 54 {
+ hwmon at 36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index e1f34653ec..c547d7921d 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -72,7 +72,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash at 0 {
+ flash at 1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 05a49982cc..bdf0c2f956 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -67,7 +67,7 @@
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom at 0 {
+ eeprom: eeprom at 2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
--
2.24.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-12-16 0:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-13 18:12 [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings Rob Herring
2018-09-13 18:12 ` Rob Herring
2018-09-18 10:52 ` Michal Simek
2018-09-18 10:52 ` Michal Simek
-- strict thread matches above, loose matches on Subject: below --
2019-12-16 0:22 Florian Klink
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.