From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: fsl: Fix I2C and SPI bus warnings
Date: Thu, 13 Sep 2018 13:12:43 -0500 [thread overview]
Message-ID: <20180913181245.25484-19-robh@kernel.org> (raw)
dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c at 2180000/eeprom at 57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c at 2180000/eeprom at 56: I2C bus unit address format error, expected "52"
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564d..5da732f82fa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
status = "disabled";
};
- dspi: dspi at 2100000 {
+ dspi: spi at 2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9a..b9c0f2de8f12 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -284,7 +284,7 @@
interrupts = <0 43 0x4>;
};
- qspi: quadspi at 1550000 {
+ qspi: spi at 1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -382,7 +382,7 @@
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi at 2100000 {
+ dspi0: spi at 2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -395,7 +395,7 @@
status = "disabled";
};
- dspi1: dspi at 2110000 {
+ dspi1: spi at 2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d5..a59b48203688 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
reg = <0x4c>;
};
- eeprom at 56 {
+ eeprom at 52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom at 57 {
+ eeprom at 53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..de6af453a6e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -202,7 +202,7 @@
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi at 1550000 {
+ qspi: spi at 1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -361,7 +361,7 @@
#thermal-sensor-cells = <1>;
};
- dspi: dspi at 2100000 {
+ dspi: spi at 2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd99672..ebe0cd4bf2b7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -469,7 +469,7 @@
mmu-masters = <&fsl_mc 0x300 0>;
};
- dspi: dspi at 2100000 {
+ dspi: spi at 2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
@@ -595,7 +595,7 @@
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi at 20c0000 {
+ qspi: spi at 20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>
Subject: [PATCH] arm64: dts: fsl: Fix I2C and SPI bus warnings
Date: Thu, 13 Sep 2018 13:12:43 -0500 [thread overview]
Message-ID: <20180913181245.25484-19-robh@kernel.org> (raw)
dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please apply to the sub-arch tree. The dtc changes haven't landed, but
will for 4.20.
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564d..5da732f82fa0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
status = "disabled";
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9a..b9c0f2de8f12 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -284,7 +284,7 @@
interrupts = <0 43 0x4>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -382,7 +382,7 @@
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -395,7 +395,7 @@
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d5..a59b48203688 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
reg = <0x4c>;
};
- eeprom@56 {
+ eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom@57 {
+ eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b90..de6af453a6e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -202,7 +202,7 @@
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -361,7 +361,7 @@
#thermal-sensor-cells = <1>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd99672..ebe0cd4bf2b7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -469,7 +469,7 @@
mmu-masters = <&fsl_mc 0x300 0>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
@@ -595,7 +595,7 @@
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi@20c0000 {
+ qspi: spi@20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
--
2.17.1
next reply other threads:[~2018-09-13 18:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 18:12 Rob Herring [this message]
2018-09-13 18:12 ` [PATCH] arm64: dts: fsl: Fix I2C and SPI bus warnings Rob Herring
2018-09-13 18:19 ` Li Yang
2018-09-13 18:19 ` Li Yang
2018-09-26 9:09 ` Shawn Guo
2018-09-26 9:09 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913181245.25484-19-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.