Re: [PATCH 1/4] drm/i915/runtime_pm: Share code to enable/disable PCH reset handshake

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Thu, Sep 13, 2018 at 02:22:48PM -0700, José Roberto de Souza wrote:
> Instead of have the same code spread into 4 platforms lets share it.
> BXT do not have a PCH so here also handling this case by unseting
> RESET_PCH_HANDSHAKE_ENABLE.
> 
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 29 ++++++++++++++-----------
>  1 file changed, 16 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 480dadb1047b..8bcb33367d0d 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3239,18 +3239,28 @@ static void icl_mbus_init(struct drm_i915_private *dev_priv)
>  	I915_WRITE(MBUS_ABOX_CTL, val);
>  }
>  
> +static void skl_pch_reset_handshake(struct drm_i915_private *dev_priv)
> +{
> +	u32 val = I915_READ(HSW_NDE_RSTWRN_OPT);
> +
> +	if (HAS_PCH_SPLIT(dev_priv))
> +		val |= RESET_PCH_HANDSHAKE_ENABLE;
> +	else
> +		val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> +
> +	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +}

hsw has this too. And ivb has a slightly different version. Could unify
it all. And maybe pass the enable/disable as a paramter to make it clear
from reading the calling code what it's doing?

> +
>  static void skl_display_core_init(struct drm_i915_private *dev_priv,
>  				   bool resume)
>  {
>  	struct i915_power_domains *power_domains = &dev_priv->power_domains;
>  	struct i915_power_well *well;
> -	uint32_t val;
>  
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* enable PCH reset handshake */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
> +	skl_pch_reset_handshake(dev_priv);
>  
>  	/* enable PG1 and Misc I/O */
>  	mutex_lock(&power_domains->lock);
> @@ -3306,7 +3316,6 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
>  {
>  	struct i915_power_domains *power_domains = &dev_priv->power_domains;
>  	struct i915_power_well *well;
> -	uint32_t val;
>  
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
> @@ -3316,9 +3325,7 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
>  	 * Move the handshake programming to initialization sequence.
>  	 * Previously was left up to BIOS.
>  	 */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	skl_pch_reset_handshake(dev_priv);
>  
>  	/* Enable PG1 */
>  	mutex_lock(&power_domains->lock);
> @@ -3439,9 +3446,7 @@ static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* 1. Enable PCH Reset Handshake */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val |= RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	skl_pch_reset_handshake(dev_priv);
>  
>  	/* 2. Enable Comp */
>  	val = I915_READ(CHICKEN_MISC_2);
> @@ -3524,9 +3529,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
>  	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>  
>  	/* 1. Enable PCH reset handshake. */
> -	val = I915_READ(HSW_NDE_RSTWRN_OPT);
> -	val |= RESET_PCH_HANDSHAKE_ENABLE;
> -	I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +	skl_pch_reset_handshake(dev_priv);
>  
>  	for (port = PORT_A; port <= PORT_B; port++) {
>  		/* 2. Enable DDI combo PHY comp. */
> -- 
> 2.19.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx