Re: [PATCH v2 2/4] [media] ad5820: Add support for enable pin

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1811 bytes --]

On Thu 2018-09-20 21:12:44, Ricardo Ribalda Delgado wrote:
> On Thu, Sep 20, 2018 at 9:08 PM Pavel Machek <pavel@ucw.cz> wrote:
> >
> > On Thu 2018-09-20 21:06:16, Ricardo Ribalda Delgado wrote:
> > > Hi Pavel
> > >
> > > On Thu, Sep 20, 2018 at 8:54 PM Pavel Machek <pavel@ucw.cz> wrote:
> > > >
> > > > On Thu 2018-09-20 20:45:52, Ricardo Ribalda Delgado wrote:
> > > > > This patch adds support for a programmable enable pin. It can be used in
> > > > > situations where the ANA-vcc is not configurable (dummy-regulator), or
> > > > > just to have a more fine control of the power saving.
> > > > >
> > > > > The use of the enable pin is optional.
> > > > >
> > > > > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> > > >
> > > > Do we really want to do that?
> > > >
> > > > Would it make more sense to add gpio-regulator and connect ad5820 to
> > > > it in such case?
> > > >
> > >
> > > My board (based on db820c)  has both:
> > >
> > > ad5820: dac@0c {
> > >    compatible = "adi,ad5820";
> > >    reg = <0x0c>;
> > >
> > >    VANA-supply = <&pm8994_l23>;
> > >    enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
> > > };
> >
> > Well, I'm sure you could have gpio-based regulator powered from
> > pm8994_l23, and outputting to ad5820.
> >
> > Does ad5820 chip have a gpio input for enable?
> 
> xshutdown pin:
> http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf
> 
> (AD5820,AD5821, and AD5823 are compatibles, or at least that is waht
> the module manufacturer says :)

Aha, sorry for the noise.

2,3: Acked-by: Pavel Machek <pavel@ucw.cz>

Thanks,
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]