[PATCHv4 4/6] ARM: dts: exynos: Add CD and WP pins to Odroid XU3/XU4 SD card

[Anand Moon <linux.amoon@gmail.com>]

Add the card-detect and write-protect GPIO pins for OdroidXU3/XU4
SD card by adding pinctrl setting for wp-gpio pin and set it to
active low.

This also removes debug messages:
    dwmmc_exynos 12220000.mmc: No GPIO consumer cd found
    dwmmc_exynos 12220000.mmc: No GPIO consumer wp found

Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Fix the commit message and squash it with cd-gpios and wp-gpio
patches into single patch as suggested by Krzysztof.
---
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi     | 8 ++++++++
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index dda8ca2d2324..9a39a0d8ec86 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -289,6 +289,14 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
+
+	sd2_wp: sd2-wp {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		/* Pin is floating so pull it up to disable write-protect */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_2 {
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index a80b6c045154..2aacfb669140 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -498,10 +498,12 @@
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	max-frequency = <200000000>;
+	cd-gpios = <&gpc2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpc4 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&ldo19_reg>;
 	vqmmc-supply = <&ldo13_reg>;
 	sd-uhs-sdr50;
-- 
2.17.1