* [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again [not found] <CGME20180928122141eucas1p2feee237ecf064b6abddeda569f356c86@eucas1p2.samsung.com> @ 2018-09-28 12:20 ` Marek Szyprowski 2018-09-28 13:03 ` Linus Walleij 2018-09-28 15:45 ` Ulf Hansson 0 siblings, 2 replies; 4+ messages in thread From: Marek Szyprowski @ 2018-09-28 12:20 UTC (permalink / raw) To: linux-mmc, linux-samsung-soc Cc: Marek Szyprowski, Jaehoon Chung, Ulf Hansson, Shawn Lin, Tony Lindgren, Linus Walleij, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, stable The debounce value passed to mmc_gpiod_request_cd() function is in microseconds, but msecs_to_jiffies() requires the value to be in miliseconds to properly calculate the delay, so adjust the value stored in cd_debounce_delay_ms context entry. Fixes: 1d71926bbd59 ("mmc: core: Fix debounce time to use microseconds") Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card after card is inserted") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- This patch fixes eMMC card detection on Exynos5410-based Odroid XU board, broken since Linux next-20180928. --- drivers/mmc/core/slot-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index 2a833686784b..86803a3a04dc 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -271,7 +271,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, if (debounce) { ret = gpiod_set_debounce(desc, debounce); if (ret < 0) - ctx->cd_debounce_delay_ms = debounce; + ctx->cd_debounce_delay_ms = debounce / 1000; } if (gpio_invert) -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again 2018-09-28 12:20 ` [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again Marek Szyprowski @ 2018-09-28 13:03 ` Linus Walleij 2018-09-28 15:45 ` Ulf Hansson 1 sibling, 0 replies; 4+ messages in thread From: Linus Walleij @ 2018-09-28 13:03 UTC (permalink / raw) To: Marek Szyprowski Cc: linux-mmc, linux-samsung-soc, Jaehoon Chung, Ulf Hansson, Shawn Lin, ext Tony Lindgren, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, stable On Fri, Sep 28, 2018 at 2:21 PM Marek Szyprowski <m.szyprowski@samsung.com> wrote: > The debounce value passed to mmc_gpiod_request_cd() function is in > microseconds, but msecs_to_jiffies() requires the value to be in > miliseconds to properly calculate the delay, so adjust the value stored > in cd_debounce_delay_ms context entry. > > Fixes: 1d71926bbd59 ("mmc: core: Fix debounce time to use microseconds") > Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card > after card is inserted") > Cc: stable@vger.kernel.org # v4.18+ > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> This seems correct, after some reading and scratching my head: Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again 2018-09-28 12:20 ` [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again Marek Szyprowski 2018-09-28 13:03 ` Linus Walleij @ 2018-09-28 15:45 ` Ulf Hansson 2018-09-28 16:30 ` Tony Lindgren 1 sibling, 1 reply; 4+ messages in thread From: Ulf Hansson @ 2018-09-28 15:45 UTC (permalink / raw) To: Marek Szyprowski Cc: linux-mmc@vger.kernel.org, linux-samsung-soc, Jaehoon Chung, Shawn Lin, Tony Lindgren, Linus Walleij, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, # 4.0+ On 28 September 2018 at 14:20, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > The debounce value passed to mmc_gpiod_request_cd() function is in > microseconds, but msecs_to_jiffies() requires the value to be in > miliseconds to properly calculate the delay, so adjust the value stored > in cd_debounce_delay_ms context entry. > > Fixes: 1d71926bbd59 ("mmc: core: Fix debounce time to use microseconds") > Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card > after card is inserted") > Cc: stable@vger.kernel.org # v4.18+ > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Applied for fixes! Kind regards Uffe > --- > This patch fixes eMMC card detection on Exynos5410-based Odroid XU board, > broken since Linux next-20180928. > --- > drivers/mmc/core/slot-gpio.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c > index 2a833686784b..86803a3a04dc 100644 > --- a/drivers/mmc/core/slot-gpio.c > +++ b/drivers/mmc/core/slot-gpio.c > @@ -271,7 +271,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, > if (debounce) { > ret = gpiod_set_debounce(desc, debounce); > if (ret < 0) > - ctx->cd_debounce_delay_ms = debounce; > + ctx->cd_debounce_delay_ms = debounce / 1000; > } > > if (gpio_invert) > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again 2018-09-28 15:45 ` Ulf Hansson @ 2018-09-28 16:30 ` Tony Lindgren 0 siblings, 0 replies; 4+ messages in thread From: Tony Lindgren @ 2018-09-28 16:30 UTC (permalink / raw) To: Ulf Hansson Cc: Marek Szyprowski, linux-mmc@vger.kernel.org, linux-samsung-soc, Jaehoon Chung, Shawn Lin, Linus Walleij, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz, # 4.0+ * Ulf Hansson <ulf.hansson@linaro.org> [180928 15:50]: > On 28 September 2018 at 14:20, Marek Szyprowski > <m.szyprowski@samsung.com> wrote: > > The debounce value passed to mmc_gpiod_request_cd() function is in > > microseconds, but msecs_to_jiffies() requires the value to be in > > miliseconds to properly calculate the delay, so adjust the value stored > > in cd_debounce_delay_ms context entry. > > > > Fixes: 1d71926bbd59 ("mmc: core: Fix debounce time to use microseconds") > > Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card > > after card is inserted") > > Cc: stable@vger.kernel.org # v4.18+ > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Applied for fixes! Heh thanks for fixing it, looks like I totally missed that part :) Tony ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-09-28 16:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20180928122141eucas1p2feee237ecf064b6abddeda569f356c86@eucas1p2.samsung.com>
2018-09-28 12:20 ` [PATCH] mmc: slot-gpio: Fix debounce time to use miliseconds again Marek Szyprowski
2018-09-28 13:03 ` Linus Walleij
2018-09-28 15:45 ` Ulf Hansson
2018-09-28 16:30 ` Tony Lindgren
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.