From: Dan Murphy <dmurphy@ti.com>
To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
lee.jones@linaro.org, linux-omap@vger.kernel.org,
linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com>
Subject: [RFC PATCH v2 2/9] dt-bindings: ti-lmu: Remove LM3697
Date: Fri, 28 Sep 2018 13:29:47 -0500 [thread overview]
Message-ID: <20180928182954.25446-3-dmurphy@ti.com> (raw)
In-Reply-To: <20180928182954.25446-1-dmurphy@ti.com>
Remove support for the LM3697 LED device
from the ti-lmu. The LM3697 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/mfd/ti-lmu.txt | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..920f910be4e9 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
LM3695 Backlight
- LM3697 Backlight and fault monitor
Required properties:
- compatible: Should be one of:
@@ -18,11 +17,10 @@ Required properties:
"ti,lm3632"
"ti,lm3633"
"ti,lm3695"
- "ti,lm3697"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633, LM3697
+ 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -38,7 +36,6 @@ Optional nodes:
Required properties:
- compatible: Should be one of:
"ti,lm3633-fault-monitor"
- "ti,lm3697-fault-monitor"
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
@@ -220,24 +217,3 @@ lm3695@63 {
};
};
};
-
-lm3697@36 {
- compatible = "ti,lm3697";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3697-fault-monitor";
- };
-};
--
2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lee.jones@linaro.org>, <linux-omap@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [RFC PATCH v2 2/9] dt-bindings: ti-lmu: Remove LM3697
Date: Fri, 28 Sep 2018 13:29:47 -0500 [thread overview]
Message-ID: <20180928182954.25446-3-dmurphy@ti.com> (raw)
In-Reply-To: <20180928182954.25446-1-dmurphy@ti.com>
Remove support for the LM3697 LED device
from the ti-lmu. The LM3697 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/mfd/ti-lmu.txt | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..920f910be4e9 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
LM3695 Backlight
- LM3697 Backlight and fault monitor
Required properties:
- compatible: Should be one of:
@@ -18,11 +17,10 @@ Required properties:
"ti,lm3632"
"ti,lm3633"
"ti,lm3695"
- "ti,lm3697"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633, LM3697
+ 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -38,7 +36,6 @@ Optional nodes:
Required properties:
- compatible: Should be one of:
"ti,lm3633-fault-monitor"
- "ti,lm3697-fault-monitor"
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
@@ -220,24 +217,3 @@ lm3695@63 {
};
};
};
-
-lm3697@36 {
- compatible = "ti,lm3697";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3697-fault-monitor";
- };
-};
--
2.19.0
next prev parent reply other threads:[~2018-09-28 18:29 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-28 18:29 [RFC PATCH v2 0/9] TI LMU and Dedicated Drivers Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 1/9] leds: add TI LMU backlight driver Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-10-02 7:56 ` Pavel Machek
2018-10-02 12:32 ` Dan Murphy
2018-10-02 12:32 ` Dan Murphy
2018-10-02 18:52 ` Jacek Anaszewski
2018-10-02 22:07 ` Pavel Machek
2018-10-03 12:00 ` Dan Murphy
2018-10-03 12:00 ` Dan Murphy
2018-10-03 12:10 ` Dan Murphy
2018-10-03 12:10 ` Dan Murphy
2018-09-28 18:29 ` Dan Murphy [this message]
2018-09-28 18:29 ` [RFC PATCH v2 2/9] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy
2018-10-02 7:28 ` Pavel Machek
2018-10-03 12:24 ` Dan Murphy
2018-10-03 12:24 ` Dan Murphy
2018-10-03 13:01 ` Pavel Machek
2018-10-03 20:46 ` Jacek Anaszewski
2018-10-03 20:46 ` Jacek Anaszewski
2018-10-04 13:26 ` Dan Murphy
2018-10-04 13:26 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 4/9] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 5/9] leds: lm3697: Introduce the " Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 6/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 7/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 8/9] dt-bindings: leds: Add the LM3632 LED dt binding Dan Murphy
2018-09-28 18:29 ` Dan Murphy
2018-09-28 18:29 ` [RFC PATCH v2 9/9] leds: lm3632: Introduce the TI LM3632 driver Dan Murphy
2018-09-28 18:29 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180928182954.25446-3-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.