From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org
Cc: pavel.tatashin@microsoft.com, mhocko@suse.com,
dave.jiang@intel.com, alexander.h.duyck@linux.intel.com,
linux-kernel@vger.kernel.org, willy@infradead.org,
davem@davemloft.net, khalid.aziz@oracle.com,
rppt@linux.vnet.ibm.com, vbabka@suse.cz,
sparclinux@vger.kernel.org, dan.j.williams@intel.com,
ldufour@linux.vnet.ibm.com, mgorman@techsingularity.net,
mingo@kernel.org, kirill.shutemov@linux.intel.com
Subject: [mm PATCH 0/5] Deferred page init improvements
Date: Fri, 05 Oct 2018 15:11:57 +0000 [thread overview]
Message-ID: <20181005151006.17473.83040.stgit@localhost.localdomain> (raw)
This patchset is essentially a refactor of the page initialization logic
that is meant to provide for better code reuse while providing a
significant improvement in deferred page initialization performance.
In my testing I have seen a 60% reduction in the time needed for deferred
memory initialization on two different x86_64 based test systems I have. In
addition this provides a very slight improvement for the hotplug memory
initialization, although the improvement doesn't exceed 5% from what I can
tell and that is to be expected since most of the changes related to
hotplug init are mostly just code clean-up to allow for reuse.
The biggest gains of this patchset come from not having to test each pfn
multiple times to see if it is valid and if it is actually a part of the
node being initialized.
---
Alexander Duyck (5):
mm: Use mm_zero_struct_page from SPARC on all 64b architectures
mm: Drop meminit_pfn_in_nid as it is redundant
mm: Use memblock/zone specific iterator for handling deferred page init
mm: Move hot-plug specific memory init into separate functions and optimize
mm: Use common iterator for deferred_init_pages and deferred_free_pages
arch/sparc/include/asm/pgtable_64.h | 30 --
include/linux/memblock.h | 58 ++++
include/linux/mm.h | 33 ++
mm/memblock.c | 63 ++++
mm/page_alloc.c | 555 +++++++++++++++++++++--------------
5 files changed, 485 insertions(+), 254 deletions(-)
--
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org
Cc: pavel.tatashin@microsoft.com, mhocko@suse.com,
dave.jiang@intel.com, alexander.h.duyck@linux.intel.com,
linux-kernel@vger.kernel.org, willy@infradead.org,
davem@davemloft.net, khalid.aziz@oracle.com,
rppt@linux.vnet.ibm.com, vbabka@suse.cz,
sparclinux@vger.kernel.org, dan.j.williams@intel.com,
ldufour@linux.vnet.ibm.com, mgorman@techsingularity.net,
mingo@kernel.org, kirill.shutemov@linux.intel.com
Subject: [mm PATCH 0/5] Deferred page init improvements
Date: Fri, 05 Oct 2018 08:11:57 -0700 [thread overview]
Message-ID: <20181005151006.17473.83040.stgit@localhost.localdomain> (raw)
This patchset is essentially a refactor of the page initialization logic
that is meant to provide for better code reuse while providing a
significant improvement in deferred page initialization performance.
In my testing I have seen a 60% reduction in the time needed for deferred
memory initialization on two different x86_64 based test systems I have. In
addition this provides a very slight improvement for the hotplug memory
initialization, although the improvement doesn't exceed 5% from what I can
tell and that is to be expected since most of the changes related to
hotplug init are mostly just code clean-up to allow for reuse.
The biggest gains of this patchset come from not having to test each pfn
multiple times to see if it is valid and if it is actually a part of the
node being initialized.
---
Alexander Duyck (5):
mm: Use mm_zero_struct_page from SPARC on all 64b architectures
mm: Drop meminit_pfn_in_nid as it is redundant
mm: Use memblock/zone specific iterator for handling deferred page init
mm: Move hot-plug specific memory init into separate functions and optimize
mm: Use common iterator for deferred_init_pages and deferred_free_pages
arch/sparc/include/asm/pgtable_64.h | 30 --
include/linux/memblock.h | 58 ++++
include/linux/mm.h | 33 ++
mm/memblock.c | 63 ++++
mm/page_alloc.c | 555 +++++++++++++++++++++--------------
5 files changed, 485 insertions(+), 254 deletions(-)
--
next reply other threads:[~2018-10-05 15:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 15:11 Alexander Duyck [this message]
2018-10-05 15:11 ` [mm PATCH 0/5] Deferred page init improvements Alexander Duyck
2018-10-05 15:12 ` [mm PATCH 1/5] mm: Use mm_zero_struct_page from SPARC on all 64b architectures Alexander Duyck
2018-10-05 15:12 ` Alexander Duyck
2018-10-05 17:37 ` Khalid Aziz
2018-10-05 17:37 ` Khalid Aziz
2018-10-05 15:12 ` [mm PATCH 2/5] mm: Drop meminit_pfn_in_nid as it is redundant Alexander Duyck
2018-10-05 15:12 ` Alexander Duyck
2018-10-05 15:12 ` [mm PATCH 3/5] mm: Use memblock/zone specific iterator for handling deferred page init Alexander Duyck
2018-10-05 15:12 ` Alexander Duyck
2018-10-05 15:12 ` [mm PATCH 4/5] mm: Move hot-plug specific memory init into separate functions and optimize Alexander Duyck
2018-10-05 15:12 ` Alexander Duyck
2018-10-05 15:12 ` [mm PATCH 5/5] mm: Use common iterator for deferred_init_pages and deferred_free_pages Alexander Duyck
2018-10-05 15:12 ` Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181005151006.17473.83040.stgit@localhost.localdomain \
--to=alexander.h.duyck@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=davem@davemloft.net \
--cc=khalid.aziz@oracle.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=ldufour@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@suse.com \
--cc=mingo@kernel.org \
--cc=pavel.tatashin@microsoft.com \
--cc=rppt@linux.vnet.ibm.com \
--cc=sparclinux@vger.kernel.org \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.