From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
Date: Mon, 8 Oct 2018 14:05:03 +0800 [thread overview]
Message-ID: <20181008060500.GI3587@dragon> (raw)
In-Reply-To: <1538663639-3427-1-git-send-email-kueffner.markus@gmail.com>
Add a few udoo board users for comment.
On Thu, Oct 04, 2018 at 04:33:59PM +0200, Markus Kueffner wrote:
> From: Markus Kueffner <kueffner.markus@gmail.com>
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
> ---
> arch/arm/boot/dts/imx6qdl-udoo.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index 4f27861..5614170 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -195,6 +195,13 @@
> >;
> };
>
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> pinctrl_usbh: usbhgrp {
> fsl,pins = <
> MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
> @@ -265,6 +272,12 @@
> status = "okay";
> };
>
> +&uart4 { // iMX6-Arduino internal serial port - ttymxc3
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> &usbh1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbh>;
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Markus Kueffner <kueffner.markus@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>,
devicetree@vger.kernel.org,
"Maciej S. Szmigiero" <mail@maciej.szmigiero.name>,
Robert Nelson <robertcnelson@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4
Date: Mon, 8 Oct 2018 14:05:03 +0800 [thread overview]
Message-ID: <20181008060500.GI3587@dragon> (raw)
In-Reply-To: <1538663639-3427-1-git-send-email-kueffner.markus@gmail.com>
Add a few udoo board users for comment.
On Thu, Oct 04, 2018 at 04:33:59PM +0200, Markus Kueffner wrote:
> From: Markus Kueffner <kueffner.markus@gmail.com>
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
> ---
> arch/arm/boot/dts/imx6qdl-udoo.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index 4f27861..5614170 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -195,6 +195,13 @@
> >;
> };
>
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> pinctrl_usbh: usbhgrp {
> fsl,pins = <
> MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
> @@ -265,6 +272,12 @@
> status = "okay";
> };
>
> +&uart4 { // iMX6-Arduino internal serial port - ttymxc3
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> &usbh1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbh>;
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-10-08 6:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-04 14:33 [PATCH] ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4 Markus Kueffner
2018-10-08 6:05 ` Shawn Guo [this message]
2018-10-08 6:05 ` Shawn Guo
2018-10-10 21:57 ` Maciej S. Szmigiero
2018-10-10 21:57 ` Maciej S. Szmigiero
2018-10-08 20:51 ` Fabio Estevam
2018-10-08 20:51 ` Fabio Estevam
2018-10-10 8:19 ` Markus Kueffner
2018-10-10 8:19 ` Markus Kueffner
2018-10-10 22:20 ` Fabio Estevam
2018-10-10 22:20 ` Fabio Estevam
2018-10-11 13:12 ` Shawn Guo
2018-10-11 13:12 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181008060500.GI3587@dragon \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.