From: Oliver O'Halloran <oohall@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: nfont@linux.vnet.ibm.com, linux-nvdimm@lists.01.org
Subject: [PATCH 2/2] powerpc/pseries: Add driver for PAPR SCM regions
Date: Wed, 10 Oct 2018 17:08:12 +1100 [thread overview]
Message-ID: <20181010060812.20068-3-oohall@gmail.com> (raw)
In-Reply-To: <20181010060812.20068-1-oohall@gmail.com>
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:
a) The guest is required to use the H_SCM_BIND_MEM h-call to add
add the SCM region to it's physical address space, and
b) There is currently no mechanism for relating a bare of_pmem region
to the backing DIMM (or not-a-DIMM for our case).
Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
The alternative implementation here is that we have the pseries code
do the h-calls and craft a pmem-region@<addr> node based on that.
However, that doesn't solve b) and mpe has expressed his dislike of
adding new stuff to the DT at runtime so i'd say that's a non-starter.
---
arch/powerpc/platforms/pseries/Kconfig | 7 +
arch/powerpc/platforms/pseries/Makefile | 1 +
arch/powerpc/platforms/pseries/papr_scm.c | 340 ++++++++++++++++++++++++++++++
3 files changed, 348 insertions(+)
create mode 100644 arch/powerpc/platforms/pseries/papr_scm.c
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 0c698fd6d491..4b0fcb80efe5 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -140,3 +140,10 @@ config IBMEBUS
bool "Support for GX bus based adapters"
help
Bus device driver for GX bus based adapters.
+
+config PAPR_SCM
+ depends on PPC_PSERIES && MEMORY_HOTPLUG
+ select LIBNVDIMM
+ tristate "Support for the PAPR Storage Class Memory interface"
+ help
+ Enable access to hypervisor provided storage class memory.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 892b27ced973..a43ec843c8e2 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
+obj-$(CONFIG_PAPR_SCM) += papr_scm.o
ifdef CONFIG_PPC_PSERIES
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
new file mode 100644
index 000000000000..87d4dbc18845
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "papr-scm: " fmt
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/ndctl.h>
+#include <linux/libnvdimm.h>
+#include <linux/platform_device.h>
+
+#include <asm/plpar_wrappers.h>
+
+#define BIND_ANY_ADDR (~0ul)
+
+#define PAPR_SCM_DIMM_CMD_MASK \
+ ((1ul << ND_CMD_GET_CONFIG_SIZE) | \
+ (1ul << ND_CMD_GET_CONFIG_DATA) | \
+ (1ul << ND_CMD_SET_CONFIG_DATA))
+
+struct papr_scm_priv {
+ struct platform_device *pdev;
+ struct device_node *dn;
+ uint32_t drc_index;
+ uint64_t blocks;
+ uint64_t block_size;
+ int metadata_size;
+
+ uint64_t bound_addr;
+
+ struct nvdimm_bus_descriptor bus_desc;
+ struct nvdimm_bus *bus;
+ struct nvdimm *nvdimm;
+ struct resource res;
+ struct nd_region *region;
+ struct nd_interleave_set nd_set;
+};
+
+static int drc_pmem_bind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ /*
+ * When the hypervisor cannot map all the requested memory in a single
+ * hcall it returns H_BUSY and we call again with the token until
+ * we get H_SUCCESS. Aborting the retry loop before getting H_SUCCESS
+ * leave the system in an undefined state, so we wait.
+ */
+ token = 0;
+
+ do {
+ rc = plpar_hcall(H_SCM_BIND_MEM, ret, p->drc_index, 0,
+ p->blocks, BIND_ANY_ADDR, token);
+ token = be64_to_cpu(ret[0]);
+ } while (rc == H_BUSY);
+
+ if (rc) {
+ dev_err(&p->pdev->dev, "bind err: %lld\n", rc);
+ return -ENXIO;
+ }
+
+ p->bound_addr = be64_to_cpu(ret[1]);
+
+ dev_dbg(&p->pdev->dev, "bound drc %x to %pR\n", p->drc_index, &p->res);
+
+ return 0;
+}
+
+static int drc_pmem_unbind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ token = 0;
+
+ /* NB: unbind has the same retry requirements mentioned above */
+ do {
+ rc = plpar_hcall(H_SCM_UNBIND_MEM, ret, p->drc_index,
+ p->bound_addr, p->blocks, token);
+ token = be64_to_cpu(ret);
+ } while (rc == H_BUSY);
+
+ if (rc)
+ dev_err(&p->pdev->dev, "unbind error: %lld\n", rc);
+
+ return !!rc;
+}
+
+static int papr_scm_meta_get(struct papr_scm_priv *p,
+ struct nd_cmd_get_config_data_hdr *hdr)
+{
+ unsigned long data[PLPAR_HCALL_BUFSIZE];
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall(H_SCM_READ_METADATA, data, p->drc_index,
+ hdr->in_offset, 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ hdr->out_buf[0] = data[0] & 0xff;
+
+ return 0;
+}
+
+static int papr_scm_meta_set(struct papr_scm_priv *p,
+ struct nd_cmd_set_config_hdr *hdr)
+{
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall_norets(H_SCM_WRITE_METADATA,
+ p->drc_index, hdr->in_offset, hdr->in_buf[0], 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ return 0;
+}
+
+int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
+ unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
+{
+ struct nd_cmd_get_config_size *get_size_hdr;
+ struct papr_scm_priv *p;
+
+ /* Only dimm-specific calls are supported atm */
+ if (!nvdimm)
+ return -EINVAL;
+
+ p = nvdimm_provider_data(nvdimm);
+
+ switch (cmd) {
+ case ND_CMD_GET_CONFIG_SIZE:
+ get_size_hdr = buf;
+
+ get_size_hdr->status = 0;
+ get_size_hdr->max_xfer = 1;
+ get_size_hdr->config_size = p->metadata_size;
+ *cmd_rc = 0;
+ break;
+
+ case ND_CMD_GET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_get(p, buf);
+ break;
+
+ case ND_CMD_SET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_set(p, buf);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&p->pdev->dev, "returned with cmd_rc = %d\n", *cmd_rc);
+
+ return 0;
+}
+
+static const struct attribute_group *region_attr_groups[] = {
+ &nd_region_attribute_group,
+ &nd_device_attribute_group,
+ &nd_mapping_attribute_group,
+ &nd_numa_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *bus_attr_groups[] = {
+ &nvdimm_bus_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *papr_scm_dimm_groups[] = {
+ &nvdimm_attribute_group,
+ &nd_device_attribute_group,
+ NULL,
+};
+
+static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
+{
+ struct device *dev = &p->pdev->dev;
+ struct nd_mapping_desc mapping;
+ struct nd_region_desc ndr_desc;
+ unsigned long dimm_flags;
+
+ p->bus_desc.ndctl = papr_scm_ndctl;
+ p->bus_desc.module = THIS_MODULE;
+ p->bus_desc.of_node = p->pdev->dev.of_node;
+ p->bus_desc.attr_groups = bus_attr_groups;
+ p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL);
+
+ if (!p->bus_desc.provider_name)
+ return -ENOMEM;
+
+ p->bus = nvdimm_bus_register(NULL, &p->bus_desc);
+ if (!p->bus) {
+ dev_err(dev, "Error creating nvdimm bus %pOF\n", p->dn);
+ return -ENXIO;
+ }
+
+ dimm_flags = 0;
+ set_bit(NDD_ALIASING, &dimm_flags);
+
+ p->nvdimm = nvdimm_create(p->bus, p, papr_scm_dimm_groups,
+ dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
+ if (!p->nvdimm) {
+ dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
+ goto err;
+ }
+
+ /* now add the region */
+
+ memset(&mapping, 0, sizeof(mapping));
+ mapping.nvdimm = p->nvdimm;
+ mapping.start = p->res.start;
+ mapping.size = p->blocks * p->block_size; // XXX: potential overflow?
+
+ memset(&ndr_desc, 0, sizeof(ndr_desc));
+ ndr_desc.attr_groups = region_attr_groups;
+ ndr_desc.numa_node = dev_to_node(&p->pdev->dev);
+ ndr_desc.res = &p->res;
+ ndr_desc.of_node = p->dn;
+ ndr_desc.provider_data = p;
+ ndr_desc.mapping = &mapping;
+ ndr_desc.num_mappings = 1;
+ ndr_desc.nd_set = &p->nd_set;
+ set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+
+ p->region = nvdimm_pmem_region_create(p->bus, &ndr_desc);
+ if (!p->region) {
+ dev_err(dev, "Error registering region %pR from %pOF\n",
+ ndr_desc.res, p->dn);
+ goto err;
+ }
+
+ return 0;
+
+err: nvdimm_bus_unregister(p->bus);
+ kfree(p->bus_desc.provider_name);
+ return -ENXIO;
+}
+
+static int papr_scm_probe(struct platform_device *pdev)
+{
+ uint32_t drc_index, metadata_size, unit_cap[2];
+ struct device_node *dn = pdev->dev.of_node;
+ struct papr_scm_priv *p;
+ int rc;
+
+ /* check we have all the required DT properties */
+ if (of_property_read_u32(dn, "ibm,my-drc-index", &drc_index)) {
+ dev_err(&pdev->dev, "%pOF: missing drc-index!\n", dn);
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32_array(dn, "ibm,unit-capacity", unit_cap, 2)) {
+ dev_err(&pdev->dev, "%pOF: missing unit-capacity!\n", dn);
+ return -ENODEV;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ /* optional DT properties */
+ of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
+
+ p->dn = dn;
+ p->drc_index = drc_index;
+ p->block_size = unit_cap[0];
+ p->blocks = unit_cap[1];
+
+ /* might be zero */
+ p->metadata_size = metadata_size;
+ p->pdev = pdev;
+
+ /* request the hypervisor to bind this region to somewhere in memory */
+ rc = drc_pmem_bind(p);
+ if (rc)
+ goto err;
+
+ /* setup the resource for the newly bound range */
+ p->res.start = p->bound_addr;
+ p->res.end = p->bound_addr + p->blocks * p->block_size;
+ p->res.name = pdev->name;
+ p->res.flags = IORESOURCE_MEM;
+
+ rc = papr_scm_nvdimm_init(p);
+ if (rc)
+ goto err2;
+
+ return 0;
+
+err2: drc_pmem_unbind(p);
+err: kfree(p);
+ return rc;
+}
+
+static int papr_scm_remove(struct platform_device *pdev)
+{
+ struct papr_scm_priv *p = platform_get_drvdata(pdev);
+
+ nvdimm_bus_unregister(p->bus);
+ drc_pmem_unbind(p);
+ kfree(p);
+
+ return 0;
+}
+
+static const struct of_device_id papr_scm_match[] = {
+ { .compatible = "ibm,pmemory" },
+ { },
+};
+
+static struct platform_driver papr_scm_driver = {
+ .probe = papr_scm_probe,
+ .remove = papr_scm_remove,
+ .driver = {
+ .name = "papr_scm",
+ .owner = THIS_MODULE,
+ .of_match_table = papr_scm_match,
+ },
+};
+
+module_platform_driver(papr_scm_driver);
+MODULE_DEVICE_TABLE(of, papr_scm_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("IBM Corporation");
--
2.9.5
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
WARNING: multiple messages have this Message-ID (diff)
From: Oliver O'Halloran <oohall@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: nfont@linux.vnet.ibm.com, Oliver O'Halloran <oohall@gmail.com>,
linux-nvdimm@lists.01.org
Subject: [PATCH 2/2] powerpc/pseries: Add driver for PAPR SCM regions
Date: Wed, 10 Oct 2018 17:08:12 +1100 [thread overview]
Message-ID: <20181010060812.20068-3-oohall@gmail.com> (raw)
In-Reply-To: <20181010060812.20068-1-oohall@gmail.com>
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:
a) The guest is required to use the H_SCM_BIND_MEM h-call to add
add the SCM region to it's physical address space, and
b) There is currently no mechanism for relating a bare of_pmem region
to the backing DIMM (or not-a-DIMM for our case).
Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
The alternative implementation here is that we have the pseries code
do the h-calls and craft a pmem-region@<addr> node based on that.
However, that doesn't solve b) and mpe has expressed his dislike of
adding new stuff to the DT at runtime so i'd say that's a non-starter.
---
arch/powerpc/platforms/pseries/Kconfig | 7 +
arch/powerpc/platforms/pseries/Makefile | 1 +
arch/powerpc/platforms/pseries/papr_scm.c | 340 ++++++++++++++++++++++++++++++
3 files changed, 348 insertions(+)
create mode 100644 arch/powerpc/platforms/pseries/papr_scm.c
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 0c698fd6d491..4b0fcb80efe5 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -140,3 +140,10 @@ config IBMEBUS
bool "Support for GX bus based adapters"
help
Bus device driver for GX bus based adapters.
+
+config PAPR_SCM
+ depends on PPC_PSERIES && MEMORY_HOTPLUG
+ select LIBNVDIMM
+ tristate "Support for the PAPR Storage Class Memory interface"
+ help
+ Enable access to hypervisor provided storage class memory.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 892b27ced973..a43ec843c8e2 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
+obj-$(CONFIG_PAPR_SCM) += papr_scm.o
ifdef CONFIG_PPC_PSERIES
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
new file mode 100644
index 000000000000..87d4dbc18845
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "papr-scm: " fmt
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/ndctl.h>
+#include <linux/libnvdimm.h>
+#include <linux/platform_device.h>
+
+#include <asm/plpar_wrappers.h>
+
+#define BIND_ANY_ADDR (~0ul)
+
+#define PAPR_SCM_DIMM_CMD_MASK \
+ ((1ul << ND_CMD_GET_CONFIG_SIZE) | \
+ (1ul << ND_CMD_GET_CONFIG_DATA) | \
+ (1ul << ND_CMD_SET_CONFIG_DATA))
+
+struct papr_scm_priv {
+ struct platform_device *pdev;
+ struct device_node *dn;
+ uint32_t drc_index;
+ uint64_t blocks;
+ uint64_t block_size;
+ int metadata_size;
+
+ uint64_t bound_addr;
+
+ struct nvdimm_bus_descriptor bus_desc;
+ struct nvdimm_bus *bus;
+ struct nvdimm *nvdimm;
+ struct resource res;
+ struct nd_region *region;
+ struct nd_interleave_set nd_set;
+};
+
+static int drc_pmem_bind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ /*
+ * When the hypervisor cannot map all the requested memory in a single
+ * hcall it returns H_BUSY and we call again with the token until
+ * we get H_SUCCESS. Aborting the retry loop before getting H_SUCCESS
+ * leave the system in an undefined state, so we wait.
+ */
+ token = 0;
+
+ do {
+ rc = plpar_hcall(H_SCM_BIND_MEM, ret, p->drc_index, 0,
+ p->blocks, BIND_ANY_ADDR, token);
+ token = be64_to_cpu(ret[0]);
+ } while (rc == H_BUSY);
+
+ if (rc) {
+ dev_err(&p->pdev->dev, "bind err: %lld\n", rc);
+ return -ENXIO;
+ }
+
+ p->bound_addr = be64_to_cpu(ret[1]);
+
+ dev_dbg(&p->pdev->dev, "bound drc %x to %pR\n", p->drc_index, &p->res);
+
+ return 0;
+}
+
+static int drc_pmem_unbind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ token = 0;
+
+ /* NB: unbind has the same retry requirements mentioned above */
+ do {
+ rc = plpar_hcall(H_SCM_UNBIND_MEM, ret, p->drc_index,
+ p->bound_addr, p->blocks, token);
+ token = be64_to_cpu(ret);
+ } while (rc == H_BUSY);
+
+ if (rc)
+ dev_err(&p->pdev->dev, "unbind error: %lld\n", rc);
+
+ return !!rc;
+}
+
+static int papr_scm_meta_get(struct papr_scm_priv *p,
+ struct nd_cmd_get_config_data_hdr *hdr)
+{
+ unsigned long data[PLPAR_HCALL_BUFSIZE];
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall(H_SCM_READ_METADATA, data, p->drc_index,
+ hdr->in_offset, 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ hdr->out_buf[0] = data[0] & 0xff;
+
+ return 0;
+}
+
+static int papr_scm_meta_set(struct papr_scm_priv *p,
+ struct nd_cmd_set_config_hdr *hdr)
+{
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall_norets(H_SCM_WRITE_METADATA,
+ p->drc_index, hdr->in_offset, hdr->in_buf[0], 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ return 0;
+}
+
+int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
+ unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
+{
+ struct nd_cmd_get_config_size *get_size_hdr;
+ struct papr_scm_priv *p;
+
+ /* Only dimm-specific calls are supported atm */
+ if (!nvdimm)
+ return -EINVAL;
+
+ p = nvdimm_provider_data(nvdimm);
+
+ switch (cmd) {
+ case ND_CMD_GET_CONFIG_SIZE:
+ get_size_hdr = buf;
+
+ get_size_hdr->status = 0;
+ get_size_hdr->max_xfer = 1;
+ get_size_hdr->config_size = p->metadata_size;
+ *cmd_rc = 0;
+ break;
+
+ case ND_CMD_GET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_get(p, buf);
+ break;
+
+ case ND_CMD_SET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_set(p, buf);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&p->pdev->dev, "returned with cmd_rc = %d\n", *cmd_rc);
+
+ return 0;
+}
+
+static const struct attribute_group *region_attr_groups[] = {
+ &nd_region_attribute_group,
+ &nd_device_attribute_group,
+ &nd_mapping_attribute_group,
+ &nd_numa_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *bus_attr_groups[] = {
+ &nvdimm_bus_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *papr_scm_dimm_groups[] = {
+ &nvdimm_attribute_group,
+ &nd_device_attribute_group,
+ NULL,
+};
+
+static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
+{
+ struct device *dev = &p->pdev->dev;
+ struct nd_mapping_desc mapping;
+ struct nd_region_desc ndr_desc;
+ unsigned long dimm_flags;
+
+ p->bus_desc.ndctl = papr_scm_ndctl;
+ p->bus_desc.module = THIS_MODULE;
+ p->bus_desc.of_node = p->pdev->dev.of_node;
+ p->bus_desc.attr_groups = bus_attr_groups;
+ p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL);
+
+ if (!p->bus_desc.provider_name)
+ return -ENOMEM;
+
+ p->bus = nvdimm_bus_register(NULL, &p->bus_desc);
+ if (!p->bus) {
+ dev_err(dev, "Error creating nvdimm bus %pOF\n", p->dn);
+ return -ENXIO;
+ }
+
+ dimm_flags = 0;
+ set_bit(NDD_ALIASING, &dimm_flags);
+
+ p->nvdimm = nvdimm_create(p->bus, p, papr_scm_dimm_groups,
+ dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
+ if (!p->nvdimm) {
+ dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
+ goto err;
+ }
+
+ /* now add the region */
+
+ memset(&mapping, 0, sizeof(mapping));
+ mapping.nvdimm = p->nvdimm;
+ mapping.start = p->res.start;
+ mapping.size = p->blocks * p->block_size; // XXX: potential overflow?
+
+ memset(&ndr_desc, 0, sizeof(ndr_desc));
+ ndr_desc.attr_groups = region_attr_groups;
+ ndr_desc.numa_node = dev_to_node(&p->pdev->dev);
+ ndr_desc.res = &p->res;
+ ndr_desc.of_node = p->dn;
+ ndr_desc.provider_data = p;
+ ndr_desc.mapping = &mapping;
+ ndr_desc.num_mappings = 1;
+ ndr_desc.nd_set = &p->nd_set;
+ set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+
+ p->region = nvdimm_pmem_region_create(p->bus, &ndr_desc);
+ if (!p->region) {
+ dev_err(dev, "Error registering region %pR from %pOF\n",
+ ndr_desc.res, p->dn);
+ goto err;
+ }
+
+ return 0;
+
+err: nvdimm_bus_unregister(p->bus);
+ kfree(p->bus_desc.provider_name);
+ return -ENXIO;
+}
+
+static int papr_scm_probe(struct platform_device *pdev)
+{
+ uint32_t drc_index, metadata_size, unit_cap[2];
+ struct device_node *dn = pdev->dev.of_node;
+ struct papr_scm_priv *p;
+ int rc;
+
+ /* check we have all the required DT properties */
+ if (of_property_read_u32(dn, "ibm,my-drc-index", &drc_index)) {
+ dev_err(&pdev->dev, "%pOF: missing drc-index!\n", dn);
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32_array(dn, "ibm,unit-capacity", unit_cap, 2)) {
+ dev_err(&pdev->dev, "%pOF: missing unit-capacity!\n", dn);
+ return -ENODEV;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ /* optional DT properties */
+ of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
+
+ p->dn = dn;
+ p->drc_index = drc_index;
+ p->block_size = unit_cap[0];
+ p->blocks = unit_cap[1];
+
+ /* might be zero */
+ p->metadata_size = metadata_size;
+ p->pdev = pdev;
+
+ /* request the hypervisor to bind this region to somewhere in memory */
+ rc = drc_pmem_bind(p);
+ if (rc)
+ goto err;
+
+ /* setup the resource for the newly bound range */
+ p->res.start = p->bound_addr;
+ p->res.end = p->bound_addr + p->blocks * p->block_size;
+ p->res.name = pdev->name;
+ p->res.flags = IORESOURCE_MEM;
+
+ rc = papr_scm_nvdimm_init(p);
+ if (rc)
+ goto err2;
+
+ return 0;
+
+err2: drc_pmem_unbind(p);
+err: kfree(p);
+ return rc;
+}
+
+static int papr_scm_remove(struct platform_device *pdev)
+{
+ struct papr_scm_priv *p = platform_get_drvdata(pdev);
+
+ nvdimm_bus_unregister(p->bus);
+ drc_pmem_unbind(p);
+ kfree(p);
+
+ return 0;
+}
+
+static const struct of_device_id papr_scm_match[] = {
+ { .compatible = "ibm,pmemory" },
+ { },
+};
+
+static struct platform_driver papr_scm_driver = {
+ .probe = papr_scm_probe,
+ .remove = papr_scm_remove,
+ .driver = {
+ .name = "papr_scm",
+ .owner = THIS_MODULE,
+ .of_match_table = papr_scm_match,
+ },
+};
+
+module_platform_driver(papr_scm_driver);
+MODULE_DEVICE_TABLE(of, papr_scm_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("IBM Corporation");
--
2.9.5
next prev parent reply other threads:[~2018-10-10 6:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 6:08 PAPR SCM support Oliver O'Halloran
2018-10-10 6:08 ` Oliver O'Halloran
2018-10-10 6:08 ` [PATCH 1/2] powerpc/pseries: PAPR persistent memory support Oliver O'Halloran
2018-10-10 6:08 ` Oliver O'Halloran
2018-10-10 16:36 ` Nathan Fontenot
2018-10-10 16:36 ` Nathan Fontenot
2018-10-10 22:24 ` Oliver
2018-10-10 22:24 ` Oliver
2018-10-10 6:08 ` Oliver O'Halloran [this message]
2018-10-10 6:08 ` [PATCH 2/2] powerpc/pseries: Add driver for PAPR SCM regions Oliver O'Halloran
2018-10-10 23:59 ` Michael Ellerman
2018-10-10 23:59 ` Michael Ellerman
2018-10-12 22:36 ` Dan Williams
2018-10-12 22:36 ` Dan Williams
2018-10-13 12:08 ` Michael Ellerman
2018-10-13 12:08 ` Michael Ellerman
2018-10-13 16:17 ` Dan Williams
2018-10-13 16:17 ` Dan Williams
2018-10-15 0:55 ` Michael Ellerman
2018-10-15 0:55 ` Michael Ellerman
2018-10-14 23:14 ` Oliver
2018-10-14 23:14 ` Oliver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181010060812.20068-3-oohall@gmail.com \
--to=oohall@gmail.com \
--cc=linux-nvdimm@lists.01.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nfont@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.