[PATCH 0/2] CRTC background color

[PATCH 0/2] CRTC background color

[Matt Roper]

Some display controllers can be programmed to present non-black colors
for pixels not covered by any plane (or pixels covered by the
transparent regions of higher planes).  Compositors that want a UI with
a solid color background can potentially save memory bandwidth by
setting the CRTC background property and using smaller planes to display
the rest of the content.

Earlier versions of these patches were floated on dri-devel about 2.5
years ago, but at that time the only userspace software that made use of
this was closed-source (product-specific Wayland compositors), so we
never landed the patches upstream.  I'm told that there's now some
renewed interest in this functionality from both the ChromeOS camp and
the Weston camp, so I'm re-posting updated kernel patches here to get
the ball rolling again.  As always, we'll still need the patches for at
least one of those projects to get posted (and reviewed) somewhere
public before we actually merge these kernel patches.

Cc: dri-devel@lists.freedesktop.org
Cc: wei.c.li@intel.com
Cc: harish.krupo.kps@intel.com

Matt Roper (2):
  drm: Add CRTC background color property
  drm/i915/gen9+: Add support for pipe background color

 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  5 +++++
 drivers/gpu/drm/drm_mode_config.c         |  6 ++++++
 drivers/gpu/drm/i915/i915_debugfs.c       |  9 ++++++++
 drivers/gpu/drm/i915/i915_reg.h           |  6 ++++++
 drivers/gpu/drm/i915/intel_display.c      | 34 +++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h                    | 17 ++++++++++++++++
 include/drm/drm_mode_config.h             |  5 +++++
 include/uapi/drm/drm_mode.h               | 26 +++++++++++++++++++++++
 9 files changed, 109 insertions(+)

-- 
2.14.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 1/2] drm: Add CRTC background color property

[Matt Roper]

Some display controllers can be programmed to present non-black colors
for pixels not covered by any plane (or pixels covered by the
transparent regions of higher planes).  Compositors that want a UI with
a solid color background can potentially save memory bandwidth by
setting the CRTC background property and using smaller planes to display
the rest of the content.

To avoid confusion between different ways of encoding RGB data, we
define a standard 64-bit format that should be used for this property's
value.  Helper functions and macros are provided to generate and dissect
values in this standard format with varying component precision values.

Cc: dri-devel@lists.freedesktop.org
Cc: wei.c.li@intel.com
Cc: harish.krupo.kps@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  5 +++++
 drivers/gpu/drm/drm_mode_config.c         |  6 ++++++
 include/drm/drm_crtc.h                    | 17 +++++++++++++++++
 include/drm/drm_mode_config.h             |  5 +++++
 include/uapi/drm/drm_mode.h               | 26 ++++++++++++++++++++++++++
 6 files changed, 60 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 3ba996069d69..2f8c55668089 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -101,6 +101,7 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc,
 	state->planes_changed = false;
 	state->connectors_changed = false;
 	state->color_mgmt_changed = false;
+	state->bgcolor_changed = false;
 	state->zpos_changed = false;
 	state->commit = NULL;
 	state->event = NULL;
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index d5b7f315098c..399f0ead5370 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -467,6 +467,9 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 			return -EFAULT;
 
 		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
+	} else if (property == config->bgcolor_property) {
+		state->background_color = val;
+		state->bgcolor_changed = true;
 	} else if (crtc->funcs->atomic_set_property) {
 		return crtc->funcs->atomic_set_property(crtc, state, property, val);
 	} else {
@@ -499,6 +502,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
 	else if (property == config->prop_out_fence_ptr)
 		*val = 0;
+	else if (property == config->bgcolor_property)
+		*val = state->background_color;
 	else if (crtc->funcs->atomic_get_property)
 		return crtc->funcs->atomic_get_property(crtc, state, property, val);
 	else
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index ee80788f2c40..75e376755176 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -352,6 +352,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.modifiers_property = prop;
 
+	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",
+					 0, GENMASK_ULL(63, 0));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.bgcolor_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index b21437bc95bf..ddfdad9ccecb 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -168,6 +168,11 @@ struct drm_crtc_state {
 	 * drivers to steer the atomic commit control flow.
 	 */
 	bool color_mgmt_changed : 1;
+	/**
+	 * @bgcolor_changed: Background color value has changed.  Used by
+	 * drivers to steer the atomic commit control flow.
+	 */
+	bool bgcolor_changed : 1;
 
 	/**
 	 * @no_vblank:
@@ -274,6 +279,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @background_color:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built via drm_rgba();
+	 * individual color components can be extracted with desired precision
+	 * via the DRM_RGBA_*() macros.
+	 */
+	u64 background_color;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 928e4172a0bb..c3f57a9e5b31 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -807,6 +807,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *writeback_out_fence_ptr_property;
 
+	/**
+	 * @bgcolor_property: RGBA background color for CRTC.
+	 */
+	struct drm_property *bgcolor_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 	bool quirk_addfb_prefer_xbgr_30bpp;
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index d3e0fe31efc5..66e2e2c2630e 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -888,6 +888,32 @@ struct drm_mode_revoke_lease {
 	__u32 lessee_id;
 };
 
+/*
+ * Put RGBA values into a standard 64-bit representation that can be used
+ * for ioctl parameters, inter-driver commmunication, etc.  If the component
+ * values being provided contain less than 16 bits of precision, they'll
+ * be shifted into the most significant bits.
+ */
+static inline __u64
+drm_rgba(__u8 bpc, __u16 red, __u16 green, __u16 blue, __u16 alpha)
+{
+	int msb_shift = 16 - bpc;
+
+	return (__u64)alpha << msb_shift << 48 |
+	       (__u64)blue  << msb_shift << 32 |
+	       (__u64)green << msb_shift << 16 |
+	       (__u64)red   << msb_shift;
+}
+
+/*
+ * Extract the specified number of bits of a specific color component from a
+ * standard 64-bit RGBA value.
+ */
+#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))
+#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
+#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
+#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
+
 #if defined(__cplusplus)
 }
 #endif
-- 
2.14.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 1/2] drm: Add CRTC background color property

[Ville Syrjälä]

On Wed, Oct 10, 2018 at 04:50:50PM -0700, Matt Roper wrote:
> Some display controllers can be programmed to present non-black colors
> for pixels not covered by any plane (or pixels covered by the
> transparent regions of higher planes).  Compositors that want a UI with
> a solid color background can potentially save memory bandwidth by
> setting the CRTC background property and using smaller planes to display
> the rest of the content.
> 
> To avoid confusion between different ways of encoding RGB data, we
> define a standard 64-bit format that should be used for this property's
> value.  Helper functions and macros are provided to generate and dissect
> values in this standard format with varying component precision values.
> 
> Cc: dri-devel@lists.freedesktop.org
> Cc: wei.c.li@intel.com
> Cc: harish.krupo.kps@intel.com
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  5 +++++
>  drivers/gpu/drm/drm_mode_config.c         |  6 ++++++
>  include/drm/drm_crtc.h                    | 17 +++++++++++++++++
>  include/drm/drm_mode_config.h             |  5 +++++
>  include/uapi/drm/drm_mode.h               | 26 ++++++++++++++++++++++++++
>  6 files changed, 60 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 3ba996069d69..2f8c55668089 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -101,6 +101,7 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc,
>  	state->planes_changed = false;
>  	state->connectors_changed = false;
>  	state->color_mgmt_changed = false;
> +	state->bgcolor_changed = false;
>  	state->zpos_changed = false;
>  	state->commit = NULL;
>  	state->event = NULL;
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index d5b7f315098c..399f0ead5370 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -467,6 +467,9 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  			return -EFAULT;
>  
>  		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
> +	} else if (property == config->bgcolor_property) {
> +		state->background_color = val;
> +		state->bgcolor_changed = true;
>  	} else if (crtc->funcs->atomic_set_property) {
>  		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>  	} else {
> @@ -499,6 +502,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
>  	else if (property == config->prop_out_fence_ptr)
>  		*val = 0;
> +	else if (property == config->bgcolor_property)
> +		*val = state->background_color;
>  	else if (crtc->funcs->atomic_get_property)
>  		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>  	else
> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> index ee80788f2c40..75e376755176 100644
> --- a/drivers/gpu/drm/drm_mode_config.c
> +++ b/drivers/gpu/drm/drm_mode_config.c
> @@ -352,6 +352,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.modifiers_property = prop;
>  
> +	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",
> +					 0, GENMASK_ULL(63, 0));
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.bgcolor_property = prop;
> +
>  	return 0;
>  }
>  
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index b21437bc95bf..ddfdad9ccecb 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -168,6 +168,11 @@ struct drm_crtc_state {
>  	 * drivers to steer the atomic commit control flow.
>  	 */
>  	bool color_mgmt_changed : 1;
> +	/**
> +	 * @bgcolor_changed: Background color value has changed.  Used by
> +	 * drivers to steer the atomic commit control flow.
> +	 */
> +	bool bgcolor_changed : 1;
>  
>  	/**
>  	 * @no_vblank:
> @@ -274,6 +279,18 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_property_blob *gamma_lut;
>  
> +	/**
> +	 * @background_color:
> +	 *
> +	 * RGB value representing the pipe's background color.  The background
> +	 * color (aka "canvas color") of a pipe is the color that will be used
> +	 * for pixels not covered by a plane, or covered by transparent pixels
> +	 * of a plane.  The value here should be built via drm_rgba();
> +	 * individual color components can be extracted with desired precision
> +	 * via the DRM_RGBA_*() macros.
> +	 */
> +	u64 background_color;
> +
>  	/**
>  	 * @target_vblank:
>  	 *
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 928e4172a0bb..c3f57a9e5b31 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -807,6 +807,11 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *writeback_out_fence_ptr_property;
>  
> +	/**
> +	 * @bgcolor_property: RGBA background color for CRTC.
> +	 */
> +	struct drm_property *bgcolor_property;
> +
>  	/* dumb ioctl parameters */
>  	uint32_t preferred_depth, prefer_shadow;
>  	bool quirk_addfb_prefer_xbgr_30bpp;
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index d3e0fe31efc5..66e2e2c2630e 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -888,6 +888,32 @@ struct drm_mode_revoke_lease {
>  	__u32 lessee_id;
>  };
>  
> +/*
> + * Put RGBA values into a standard 64-bit representation that can be used
> + * for ioctl parameters, inter-driver commmunication, etc.  If the component
> + * values being provided contain less than 16 bits of precision, they'll
> + * be shifted into the most significant bits.
> + */
> +static inline __u64
> +drm_rgba(__u8 bpc, __u16 red, __u16 green, __u16 blue, __u16 alpha)
> +{
> +	int msb_shift = 16 - bpc;
> +
> +	return (__u64)alpha << msb_shift << 48 |
> +	       (__u64)blue  << msb_shift << 32 |
> +	       (__u64)green << msb_shift << 16 |
> +	       (__u64)red   << msb_shift;

I would still call that abgr in drm terminology (eg. when compared
to the fourccs). And I'd still prefer the argb order as it's what
our hardware expects anyway :) Would make me less confused when
looking at a 64bit hex color value at least.


> +}
> +
> +/*
> + * Extract the specified number of bits of a specific color component from a
> + * standard 64-bit RGBA value.
> + */
> +#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))
> +#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
> +#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
> +#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
> +
>  #if defined(__cplusplus)
>  }
>  #endif
> -- 
> 2.14.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/2] drm: Add CRTC background color property

[Sean Paul]

On Wed, Oct 10, 2018 at 04:50:50PM -0700, Matt Roper wrote:
> Some display controllers can be programmed to present non-black colors
> for pixels not covered by any plane (or pixels covered by the
> transparent regions of higher planes).  Compositors that want a UI with
> a solid color background can potentially save memory bandwidth by
> setting the CRTC background property and using smaller planes to display
> the rest of the content.
> 
> To avoid confusion between different ways of encoding RGB data, we
> define a standard 64-bit format that should be used for this property's
> value.  Helper functions and macros are provided to generate and dissect
> values in this standard format with varying component precision values.
> 
> Cc: dri-devel@lists.freedesktop.org
> Cc: wei.c.li@intel.com
> Cc: harish.krupo.kps@intel.com
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  5 +++++
>  drivers/gpu/drm/drm_mode_config.c         |  6 ++++++
>  include/drm/drm_crtc.h                    | 17 +++++++++++++++++
>  include/drm/drm_mode_config.h             |  5 +++++
>  include/uapi/drm/drm_mode.h               | 26 ++++++++++++++++++++++++++
>  6 files changed, 60 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 3ba996069d69..2f8c55668089 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -101,6 +101,7 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc,
>  	state->planes_changed = false;
>  	state->connectors_changed = false;
>  	state->color_mgmt_changed = false;
> +	state->bgcolor_changed = false;
>  	state->zpos_changed = false;
>  	state->commit = NULL;
>  	state->event = NULL;
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index d5b7f315098c..399f0ead5370 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -467,6 +467,9 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  			return -EFAULT;
>  
>  		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
> +	} else if (property == config->bgcolor_property) {
> +		state->background_color = val;
> +		state->bgcolor_changed = true;
>  	} else if (crtc->funcs->atomic_set_property) {
>  		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>  	} else {
> @@ -499,6 +502,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
>  	else if (property == config->prop_out_fence_ptr)
>  		*val = 0;
> +	else if (property == config->bgcolor_property)
> +		*val = state->background_color;
>  	else if (crtc->funcs->atomic_get_property)
>  		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>  	else
> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> index ee80788f2c40..75e376755176 100644
> --- a/drivers/gpu/drm/drm_mode_config.c
> +++ b/drivers/gpu/drm/drm_mode_config.c
> @@ -352,6 +352,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.modifiers_property = prop;
>  
> +	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",

This property should be documented somewhere? Maybe under "Color Management
Properties", since they apply to crtc?


> +					 0, GENMASK_ULL(63, 0));
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.bgcolor_property = prop;
> +
>  	return 0;
>  }
>  
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index b21437bc95bf..ddfdad9ccecb 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -168,6 +168,11 @@ struct drm_crtc_state {
>  	 * drivers to steer the atomic commit control flow.
>  	 */
>  	bool color_mgmt_changed : 1;
> +	/**
> +	 * @bgcolor_changed: Background color value has changed.  Used by
> +	 * drivers to steer the atomic commit control flow.
> +	 */
> +	bool bgcolor_changed : 1;
>  
>  	/**
>  	 * @no_vblank:
> @@ -274,6 +279,18 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_property_blob *gamma_lut;
>  
> +	/**
> +	 * @background_color:
> +	 *
> +	 * RGB value representing the pipe's background color.  The background
> +	 * color (aka "canvas color") of a pipe is the color that will be used
> +	 * for pixels not covered by a plane, or covered by transparent pixels
> +	 * of a plane.  The value here should be built via drm_rgba();
> +	 * individual color components can be extracted with desired precision
> +	 * via the DRM_RGBA_*() macros.
> +	 */
> +	u64 background_color;

nit: fwiw, I find it's more useful keep the property name consistent throughout
the codebase for easier grepping. So either expand the others from bgcolor to
background_color, or vice versa.

> +
>  	/**
>  	 * @target_vblank:
>  	 *
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 928e4172a0bb..c3f57a9e5b31 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -807,6 +807,11 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *writeback_out_fence_ptr_property;
>  
> +	/**
> +	 * @bgcolor_property: RGBA background color for CRTC.
> +	 */
> +	struct drm_property *bgcolor_property;
> +
>  	/* dumb ioctl parameters */
>  	uint32_t preferred_depth, prefer_shadow;
>  	bool quirk_addfb_prefer_xbgr_30bpp;
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index d3e0fe31efc5..66e2e2c2630e 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -888,6 +888,32 @@ struct drm_mode_revoke_lease {
>  	__u32 lessee_id;
>  };
>  
> +/*
> + * Put RGBA values into a standard 64-bit representation that can be used
> + * for ioctl parameters, inter-driver commmunication, etc.  If the component
> + * values being provided contain less than 16 bits of precision, they'll
> + * be shifted into the most significant bits.
> + */
> +static inline __u64
> +drm_rgba(__u8 bpc, __u16 red, __u16 green, __u16 blue, __u16 alpha)
> +{
> +	int msb_shift = 16 - bpc;
> +
> +	return (__u64)alpha << msb_shift << 48 |
> +	       (__u64)blue  << msb_shift << 32 |
> +	       (__u64)green << msb_shift << 16 |
> +	       (__u64)red   << msb_shift;
> +}
> +
> +/*
> + * Extract the specified number of bits of a specific color component from a
> + * standard 64-bit RGBA value.
> + */
> +#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))
> +#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
> +#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
> +#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
> +
>  #if defined(__cplusplus)
>  }
>  #endif
> -- 
> 2.14.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/2] drm/i915/gen9+: Add support for pipe background color

[Matt Roper]

Gen9+ platforms allow CRTC's to be programmed with a background/canvas
color below the programmable planes.  Let's expose this for use by
compositors.

Cc: dri-devel@lists.freedesktop.org
Cc: wei.c.li@intel.com
Cc: harish.krupo.kps@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  9 +++++++++
 drivers/gpu/drm/i915/i915_reg.h      |  6 ++++++
 drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++++++++++++++++
 3 files changed, 49 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 4565eda29c87..cc423f7f3e62 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3254,6 +3254,15 @@ static int i915_display_info(struct seq_file *m, void *unused)
 			intel_plane_info(m, crtc);
 		}
 
+		if (INTEL_GEN(dev_priv) >= 9 && pipe_config->base.active) {
+			uint64_t background = pipe_config->base.background_color;
+
+			seq_printf(m, "\tbackground color (10bpc): r=%x g=%x b=%x\n",
+				   DRM_RGBA_RED(background, 10),
+				   DRM_RGBA_GREEN(background, 10),
+				   DRM_RGBA_BLUE(background, 10));
+		}
+
 		seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
 			   yesno(!crtc->cpu_fifo_underrun_disabled),
 			   yesno(!crtc->pch_fifo_underrun_disabled));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 20785417953d..988183870f6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5661,6 +5661,12 @@ enum {
 #define   PIPEMISC_DITHER_TYPE_SP	(0 << 2)
 #define PIPEMISC(pipe)			_MMIO_PIPE2(pipe, _PIPE_MISC_A)
 
+/* Skylake+ pipe bottom (background) color */
+#define _PIPE_BOTTOM_COLOR_A		0x70034
+#define PIPE_BOTTOM_GAMMA_ENABLE	(1 << 31)
+#define PIPE_BOTTOM_CSC_ENABLE		(1 << 30)
+#define PIPE_BOTTOM_COLOR(pipe)		_MMIO_PIPE2(pipe, _PIPE_BOTTOM_COLOR_A)
+
 #define VLV_DPFLIPSTAT				_MMIO(VLV_DISPLAY_BASE + 0x70028)
 #define   PIPEB_LINE_COMPARE_INT_EN		(1 << 29)
 #define   PIPEB_HLINE_INT_EN			(1 << 28)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a145efba9157..2ee402a98e70 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3853,6 +3853,28 @@ void intel_finish_reset(struct drm_i915_private *dev_priv)
 	clear_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
 }
 
+static void skl_update_background_color(const struct intel_crtc_state *cstate)
+{
+	struct intel_crtc *crtc = to_intel_crtc(cstate->base.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	uint64_t propval = cstate->base.background_color;
+	uint32_t hwval;
+
+	/* Hardware is programmed with 10 bits of precision */
+	hwval = DRM_RGBA_RED(propval, 10) << 20
+	      | DRM_RGBA_GREEN(propval, 10) << 10
+	      | DRM_RGBA_BLUE(propval, 10);
+
+	/*
+	 * Set CSC and gamma for bottom color to ensure background pixels
+	 * receive the same color transformations as plane content.
+	 */
+	hwval |= PIPE_BOTTOM_CSC_ENABLE;
+	hwval |= PIPE_BOTTOM_GAMMA_ENABLE;
+
+	I915_WRITE_FW(PIPE_BOTTOM_COLOR(crtc->pipe), hwval);
+}
+
 static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
 				     const struct intel_crtc_state *new_crtc_state)
 {
@@ -3887,6 +3909,9 @@ static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_sta
 		else if (old_crtc_state->pch_pfit.enabled)
 			ironlake_pfit_disable(old_crtc_state);
 	}
+
+	if (new_crtc_state->base.bgcolor_changed)
+		skl_update_background_color(new_crtc_state);
 }
 
 static void intel_fdi_normal_train(struct intel_crtc *crtc)
@@ -10791,6 +10816,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
 		crtc_state->planes_changed = true;
 	}
 
+	if (crtc_state->bgcolor_changed)
+		pipe_config->update_pipe = true;
+
 	ret = 0;
 	if (dev_priv->display.compute_pipe_wm) {
 		ret = dev_priv->display.compute_pipe_wm(pipe_config);
@@ -13831,6 +13859,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
 
 static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 {
+	struct drm_mode_config *mode_config = &dev_priv->drm.mode_config;
 	struct intel_crtc *intel_crtc;
 	struct intel_crtc_state *crtc_state = NULL;
 	struct intel_plane *primary = NULL;
@@ -13905,6 +13934,11 @@ static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 
 	WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
 
+	if (INTEL_GEN(dev_priv) >= 9)
+		drm_object_attach_property(&intel_crtc->base.base,
+					   mode_config->bgcolor_property,
+					   drm_rgba(16, 0, 0, 0, 0xffff));
+
 	return 0;
 
 fail:
-- 
2.14.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/2] drm/i915/gen9+: Add support for pipe background color

[Ville Syrjälä]

On Wed, Oct 10, 2018 at 04:50:51PM -0700, Matt Roper wrote:
> Gen9+ platforms allow CRTC's to be programmed with a background/canvas
> color below the programmable planes.  Let's expose this for use by
> compositors.
> 
> Cc: dri-devel@lists.freedesktop.org
> Cc: wei.c.li@intel.com
> Cc: harish.krupo.kps@intel.com
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c  |  9 +++++++++
>  drivers/gpu/drm/i915/i915_reg.h      |  6 ++++++
>  drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++++++++++++++++
>  3 files changed, 49 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 4565eda29c87..cc423f7f3e62 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3254,6 +3254,15 @@ static int i915_display_info(struct seq_file *m, void *unused)
>  			intel_plane_info(m, crtc);
>  		}
>  
> +		if (INTEL_GEN(dev_priv) >= 9 && pipe_config->base.active) {
> +			uint64_t background = pipe_config->base.background_color;
> +
> +			seq_printf(m, "\tbackground color (10bpc): r=%x g=%x b=%x\n",
> +				   DRM_RGBA_RED(background, 10),
> +				   DRM_RGBA_GREEN(background, 10),
> +				   DRM_RGBA_BLUE(background, 10));
> +		}
> +
>  		seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
>  			   yesno(!crtc->cpu_fifo_underrun_disabled),
>  			   yesno(!crtc->pch_fifo_underrun_disabled));
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 20785417953d..988183870f6e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5661,6 +5661,12 @@ enum {
>  #define   PIPEMISC_DITHER_TYPE_SP	(0 << 2)
>  #define PIPEMISC(pipe)			_MMIO_PIPE2(pipe, _PIPE_MISC_A)
>  
> +/* Skylake+ pipe bottom (background) color */
> +#define _PIPE_BOTTOM_COLOR_A		0x70034
> +#define PIPE_BOTTOM_GAMMA_ENABLE	(1 << 31)
> +#define PIPE_BOTTOM_CSC_ENABLE		(1 << 30)
> +#define PIPE_BOTTOM_COLOR(pipe)		_MMIO_PIPE2(pipe, _PIPE_BOTTOM_COLOR_A)
> +
>  #define VLV_DPFLIPSTAT				_MMIO(VLV_DISPLAY_BASE + 0x70028)
>  #define   PIPEB_LINE_COMPARE_INT_EN		(1 << 29)
>  #define   PIPEB_HLINE_INT_EN			(1 << 28)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index a145efba9157..2ee402a98e70 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3853,6 +3853,28 @@ void intel_finish_reset(struct drm_i915_private *dev_priv)
>  	clear_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
>  }
>  
> +static void skl_update_background_color(const struct intel_crtc_state *cstate)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(cstate->base.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	uint64_t propval = cstate->base.background_color;
> +	uint32_t hwval;

Just 'val' or 'tmp' would be more consistent with existing code.

> +
> +	/* Hardware is programmed with 10 bits of precision */
> +	hwval = DRM_RGBA_RED(propval, 10) << 20
> +	      | DRM_RGBA_GREEN(propval, 10) << 10
> +	      | DRM_RGBA_BLUE(propval, 10);
> +
> +	/*
> +	 * Set CSC and gamma for bottom color to ensure background pixels
> +	 * receive the same color transformations as plane content.
> +	 */
> +	hwval |= PIPE_BOTTOM_CSC_ENABLE;
> +	hwval |= PIPE_BOTTOM_GAMMA_ENABLE;

Maybe we want these as a separate bugfix up front?

> +
> +	I915_WRITE_FW(PIPE_BOTTOM_COLOR(crtc->pipe), hwval);
> +}
> +
>  static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
>  				     const struct intel_crtc_state *new_crtc_state)
>  {
> @@ -3887,6 +3909,9 @@ static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_sta
>  		else if (old_crtc_state->pch_pfit.enabled)
>  			ironlake_pfit_disable(old_crtc_state);
>  	}
> +
> +	if (new_crtc_state->base.bgcolor_changed)
> +		skl_update_background_color(new_crtc_state);
>  }
>  
>  static void intel_fdi_normal_train(struct intel_crtc *crtc)
> @@ -10791,6 +10816,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
>  		crtc_state->planes_changed = true;
>  	}
>  
> +	if (crtc_state->bgcolor_changed)
> +		pipe_config->update_pipe = true;
> +
>  	ret = 0;
>  	if (dev_priv->display.compute_pipe_wm) {
>  		ret = dev_priv->display.compute_pipe_wm(pipe_config);
> @@ -13831,6 +13859,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>  
>  static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
>  {
> +	struct drm_mode_config *mode_config = &dev_priv->drm.mode_config;
>  	struct intel_crtc *intel_crtc;
>  	struct intel_crtc_state *crtc_state = NULL;
>  	struct intel_plane *primary = NULL;
> @@ -13905,6 +13934,11 @@ static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
>  
>  	WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
>  
> +	if (INTEL_GEN(dev_priv) >= 9)
> +		drm_object_attach_property(&intel_crtc->base.base,
> +					   mode_config->bgcolor_property,
> +					   drm_rgba(16, 0, 0, 0, 0xffff));
> +
>  	return 0;
>  
>  fail:
> -- 
> 2.14.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH i-g-t] tests/kms_crtc_background_color: overhaul for latest ABI proposal

[Matt Roper]

CRTC background color kernel patches were written about 2.5 years ago
and floated on the upstream mailing list, but since no opensource
userspace materialized, we never actually merged them.  However the
corresponding IGT test did get merged and has basically been dead code
ever since.

A couple years later we may finally be getting closer to landing the
kernel patches (there's some interest in this functionality now from
both the ChromeOS and Weston camps), so lets update the IGT test to
match the latest proposed ABI, and to remove some of the cruft from the
original test that wouldn't actually work.

It's worth noting that we don't seem to be able to test this feature
with CRC's.  Originally we wanted to draw a color into a plane's FB
(with Cairo) and then compare the CRC to turning off all planes and just
setting the CRTC background to the same color.  However the precision
and rounding of the color components causes the CRC's to come out
differently, even though the end result is visually identical.  So at
the moment this test is mainly useful for visual inspection in
interactive mode.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 lib/igt_kms.c                     |   2 +-
 tests/kms_crtc_background_color.c | 221 ++++++++++++++++++++------------------
 2 files changed, 120 insertions(+), 103 deletions(-)

diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index b2cbaa11..f34817b5 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -180,7 +180,7 @@ const char * const igt_plane_prop_names[IGT_NUM_PLANE_PROPS] = {
 };
 
 const char * const igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = {
-	[IGT_CRTC_BACKGROUND] = "background_color",
+	[IGT_CRTC_BACKGROUND] = "BACKGROUND_COLOR",
 	[IGT_CRTC_CTM] = "CTM",
 	[IGT_CRTC_GAMMA_LUT] = "GAMMA_LUT",
 	[IGT_CRTC_GAMMA_LUT_SIZE] = "GAMMA_LUT_SIZE",
diff --git a/tests/kms_crtc_background_color.c b/tests/kms_crtc_background_color.c
index 3df3401f..9c5a7523 100644
--- a/tests/kms_crtc_background_color.c
+++ b/tests/kms_crtc_background_color.c
@@ -25,164 +25,181 @@
 #include "igt.h"
 #include <math.h>
 
-
 IGT_TEST_DESCRIPTION("Test crtc background color feature");
 
+/*
+ * The original idea was to paint a desired color into a full-screen primary
+ * plane and then compare that CRC with turning off all planes and setting the
+ * CRTC background to the same color.  Unforunately, the rounding and precision
+ * of color values as rendered by cairo vs created by the display controller
+ * are slightly different and give different CRC's, even though they're
+ * visually identical.
+ *
+ * Since we can't really use CRC's for testing, this test is mainly useful for
+ * visual inspection in interactive mode at the moment.
+ */
+
 typedef struct {
 	int gfx_fd;
-	igt_display_t display;
-	struct igt_fb fb;
-	igt_crc_t ref_crc;
-	igt_pipe_crc_t *pipe_crc;
+	igt_output_t *output;
+	drmModeModeInfo *mode;
 } data_t;
 
-#define BLACK      0x000000           /* BGR 8bpc */
-#define CYAN       0xFFFF00           /* BGR 8bpc */
-#define PURPLE     0xFF00FF           /* BGR 8bpc */
-#define WHITE      0xFFFFFF           /* BGR 8bpc */
-
-#define BLACK64    0x000000000000     /* BGR 16bpc */
-#define CYAN64     0xFFFFFFFF0000     /* BGR 16bpc */
-#define PURPLE64   0xFFFF0000FFFF     /* BGR 16bpc */
-#define YELLOW64   0x0000FFFFFFFF     /* BGR 16bpc */
-#define WHITE64    0xFFFFFFFFFFFF     /* BGR 16bpc */
-#define RED64      0x00000000FFFF     /* BGR 16bpc */
-#define GREEN64    0x0000FFFF0000     /* BGR 16bpc */
-#define BLUE64     0xFFFF00000000     /* BGR 16bpc */
+/*
+ * Local copy of proposed kernel uapi
+ */
+static inline __u64
+local_rgba(__u8 bpc, __u16 red, __u16 green, __u16 blue, __u16 alpha)
+{
+       int msb_shift = 16 - bpc;
 
+       return (__u64)alpha << msb_shift << 48 |
+              (__u64)blue  << msb_shift << 32 |
+              (__u64)green << msb_shift << 16 |
+              (__u64)red   << msb_shift;
+}
+#define LOCAL_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))
+#define LOCAL_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
+#define LOCAL_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
+#define LOCAL_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
+
+
+/* 8bpc values */
+#define BLACK      local_rgba(8, 0,       0,    0, 0xff)
+#define RED        local_rgba(8, 0xff,    0,    0, 0xff)
+#define GREEN      local_rgba(8,    0, 0xff,    0, 0xff)
+#define BLUE       local_rgba(8,    0,    0, 0xff, 0xff)
+#define YELLOW     local_rgba(8, 0xff, 0xff,    0, 0xff)
+#define WHITE      local_rgba(8, 0xff, 0xff, 0xff, 0xff)
+
+/* 16bpc values */
+#define BLACK64    local_rgba(16,      0,      0,      0, 0xffff)
+#define RED64      local_rgba(16, 0xffff,      0,      0, 0xffff)
+#define GREEN64    local_rgba(16,      0, 0xffff,      0, 0xffff)
+#define BLUE64     local_rgba(16,      0,      0, 0xffff, 0xffff)
+#define YELLOW64   local_rgba(16, 0xffff, 0xffff,      0, 0xffff)
+#define WHITE64    local_rgba(16, 0xffff, 0xffff, 0xffff, 0xffff)
+
+#if 0
 static void
-paint_background(data_t *data, struct igt_fb *fb, drmModeModeInfo *mode,
-		uint32_t background, double alpha)
+paint_fb(data_t *data, struct igt_fb *fb, drmModeModeInfo *mode,
+	 uint64_t color, int prec)
 {
 	cairo_t *cr;
-	int w, h;
+	int w = mode->hdisplay;
+	int h = mode->vdisplay;
 	double r, g, b;
 
-	w = mode->hdisplay;
-	h = mode->vdisplay;
+	igt_create_fb(data->gfx_fd, w, h, DRM_FORMAT_XRGB8888,
+		      LOCAL_DRM_FORMAT_MOD_NONE, fb);
 
-	cr = igt_get_cairo_ctx(data->gfx_fd, &data->fb);
+	cr = igt_get_cairo_ctx(data->gfx_fd, fb);
 
-	/* Paint with background color */
-	r = (double) (background & 0xFF) / 255.0;
-	g = (double) ((background & 0xFF00) >> 8) / 255.0;
-	b = (double) ((background & 0xFF0000) >> 16) / 255.0;
-	igt_paint_color_alpha(cr, 0, 0, w, h, r, g, b, alpha);
+	/*
+	 * Grab color (with appropriate bits of precision) and paint a
+	 * framebuffer with it.
+	 */
+	r = (double)LOCAL_RGBA_RED(color, prec) / ((1<<prec) - 1);
+	g = (double)LOCAL_RGBA_GREEN(color, prec) / ((1<<prec) - 1);
+	b = (double)LOCAL_RGBA_BLUE(color, prec) / ((1<<prec) - 1);
+	igt_paint_color_alpha(cr, 0, 0, w, h, r, g, b, 1.0);
 
-	igt_put_cairo_ctx(data->gfx_fd, &data->fb, cr);
+	igt_put_cairo_ctx(data->gfx_fd, fb, cr);
 }
+#endif
 
-static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
-			igt_plane_t *plane, int opaque_buffer, int plane_color,
-			uint64_t pipe_background_color)
+static void prepare_crtc(igt_display_t *display, data_t *data,
+			 igt_output_t *output, enum pipe pipe)
 {
-	drmModeModeInfo *mode;
-	igt_display_t *display = &data->display;
-	int fb_id;
-	double alpha;
-
 	igt_output_set_pipe(output, pipe);
-
-	/* create the pipe_crc object for this pipe */
-	igt_pipe_crc_free(data->pipe_crc);
-	data->pipe_crc = igt_pipe_crc_new(data->gfx_fd, pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
-
-	mode = igt_output_get_mode(output);
-
-	fb_id = igt_create_fb(data->gfx_fd,
-			mode->hdisplay, mode->vdisplay,
-			DRM_FORMAT_XRGB8888,
-			LOCAL_DRM_FORMAT_MOD_NONE, /* tiled */
-			&data->fb);
-	igt_assert(fb_id);
-
-	/* To make FB pixel win with background color, set alpha as full opaque */
-	igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, pipe_background_color);
-	if (opaque_buffer)
-		alpha = 1.0;    /* alpha 1 is fully opque */
-	else
-		alpha = 0.0;    /* alpha 0 is fully transparent */
-	paint_background(data, &data->fb, mode, plane_color, alpha);
-
-	igt_plane_set_fb(plane, &data->fb);
-	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_display_commit2(display, COMMIT_ATOMIC);
+	data->output = output;
+	data->mode = igt_output_get_mode(output);
 }
 
-static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
+static void cleanup_crtc(igt_display_t *display, data_t *data,
+			 igt_output_t *output)
 {
-	igt_display_t *display = &data->display;
-
-	igt_pipe_crc_free(data->pipe_crc);
-	data->pipe_crc = NULL;
-
-	igt_remove_fb(data->gfx_fd, &data->fb);
-
-	igt_pipe_obj_set_prop_value(plane->pipe, IGT_CRTC_BACKGROUND, BLACK64);
-	igt_plane_set_fb(plane, NULL);
 	igt_output_set_pipe(output, PIPE_ANY);
-
-	igt_display_commit2(display, COMMIT_UNIVERSAL);
+	igt_display_commit2(display, COMMIT_ATOMIC);
 }
 
-static void test_crtc_background(data_t *data)
+static void test_crtc_background(igt_display_t *display, data_t *data)
 {
-	igt_display_t *display = &data->display;
 	igt_output_t *output;
 	enum pipe pipe;
 	int valid_tests = 0;
 
-	for_each_pipe_with_valid_output(display, pipe, output) {
+	for_each_pipe_with_single_output(display, pipe, output) {
 		igt_plane_t *plane;
 
-		igt_output_set_pipe(output, pipe);
-
-		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 		igt_require(igt_pipe_has_prop(display, pipe, IGT_CRTC_BACKGROUND));
 
-		prepare_crtc(data, output, pipe, plane, 1, PURPLE, BLACK64);
+		prepare_crtc(display, data, output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 
-		/* Now set background without using a plane, i.e.,
-		 * Disable the plane to let hw background color win blend. */
+		/*
+		 * Turn off the primary plane (default bgcolor should be black
+		 * unless a previous drm master changed it to something else).
+		 */
 		igt_plane_set_fb(plane, NULL);
-		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, PURPLE64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
-
-		/* Try few other background colors */
-		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, CYAN64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
-
-		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, YELLOW64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
-
+		igt_display_commit2(display, COMMIT_ATOMIC);
+
+		/* Explicitly set black as bg color */
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, BLACK64);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+
+		/*
+		 * Test several more colors and precisions.  Unfortunately the
+		 * CRC's won't match between a cairo-drawn fb and a display
+		 * controller bgcolor setting, but these can at least be
+		 * visually verified in interactive mode to ensure the colors
+		 * look good.
+		 */
 		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, RED64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, RED);
+		igt_display_commit2(display, COMMIT_ATOMIC);
 
 		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, GREEN64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, GREEN);
+		igt_display_commit2(display, COMMIT_ATOMIC);
 
 		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, BLUE64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, BLUE);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, YELLOW64);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, YELLOW);
+		igt_display_commit2(display, COMMIT_ATOMIC);
 
 		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, WHITE64);
-		igt_display_commit2(display, COMMIT_UNIVERSAL);
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, WHITE);
+		igt_display_commit2(display, COMMIT_ATOMIC);
 
 		valid_tests++;
-		cleanup_crtc(data, output, plane);
+
+		igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, BLACK64);
+		cleanup_crtc(display, data, output);
 	}
 	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
 igt_simple_main
 {
+	igt_display_t display;
 	data_t data = {};
 
 	igt_skip_on_simulation();
 
 	data.gfx_fd = drm_open_driver(DRIVER_INTEL);
-	igt_require_pipe_crc(data.gfx_fd);
-	igt_display_require(&data.display, data.gfx_fd);
+	igt_display_require(&display, data.gfx_fd);
 
-	test_crtc_background(&data);
+	test_crtc_background(&display, &data);
 
-	igt_display_fini(&data.display);
+	igt_display_fini(&display);
 }
-- 
2.14.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.CHECKPATCH: warning for CRTC background color

[Patchwork]

== Series Details ==

Series: CRTC background color
URL   : https://patchwork.freedesktop.org/series/50834/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
472f325f4ac4 drm: Add CRTC background color property
-:87: WARNING:BOOL_BITFIELD: Avoid using bool as bitfield.  Prefer bool bitfields as unsigned int or u<8|16|32>
#87: FILE: include/drm/drm_crtc.h:175:
+	bool bgcolor_changed : 1;

-:155: CHECK:SPACING: spaces preferred around that '-' (ctx:VxV)
#155: FILE: include/uapi/drm/drm_mode.h:912:
+#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))
                                                                      ^

-:155: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'c' may be better as '(c)' to avoid precedence issues
#155: FILE: include/uapi/drm/drm_mode.h:912:
+#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))

-:155: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'numbits' may be better as '(numbits)' to avoid precedence issues
#155: FILE: include/uapi/drm/drm_mode.h:912:
+#define DRM_RGBA_RED(c, numbits)   (__u16)((c & 0xFFFFull)     >> (16-numbits))

-:156: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#156: FILE: include/uapi/drm/drm_mode.h:913:
+#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
                                                          ^

-:156: CHECK:SPACING: spaces preferred around that '-' (ctx:VxV)
#156: FILE: include/uapi/drm/drm_mode.h:913:
+#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))
                                                                      ^

-:156: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'c' may be better as '(c)' to avoid precedence issues
#156: FILE: include/uapi/drm/drm_mode.h:913:
+#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))

-:156: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'numbits' may be better as '(numbits)' to avoid precedence issues
#156: FILE: include/uapi/drm/drm_mode.h:913:
+#define DRM_RGBA_GREEN(c, numbits) (__u16)((c & 0xFFFFull<<16) >> (32-numbits))

-:157: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#157: FILE: include/uapi/drm/drm_mode.h:914:
+#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
                                                          ^

-:157: CHECK:SPACING: spaces preferred around that '-' (ctx:VxV)
#157: FILE: include/uapi/drm/drm_mode.h:914:
+#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))
                                                                      ^

-:157: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'c' may be better as '(c)' to avoid precedence issues
#157: FILE: include/uapi/drm/drm_mode.h:914:
+#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))

-:157: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'numbits' may be better as '(numbits)' to avoid precedence issues
#157: FILE: include/uapi/drm/drm_mode.h:914:
+#define DRM_RGBA_BLUE(c, numbits)  (__u16)((c & 0xFFFFull<<32) >> (48-numbits))

-:158: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
#158: FILE: include/uapi/drm/drm_mode.h:915:
+#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
                                                          ^

-:158: CHECK:SPACING: spaces preferred around that '-' (ctx:VxV)
#158: FILE: include/uapi/drm/drm_mode.h:915:
+#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))
                                                                      ^

-:158: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'c' may be better as '(c)' to avoid precedence issues
#158: FILE: include/uapi/drm/drm_mode.h:915:
+#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))

-:158: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'numbits' may be better as '(numbits)' to avoid precedence issues
#158: FILE: include/uapi/drm/drm_mode.h:915:
+#define DRM_RGBA_ALPHA(c, numbits) (__u16)((c & 0xFFFFull<<48) >> (64-numbits))

total: 0 errors, 1 warnings, 15 checks, 108 lines checked
a0be1f8ad993 drm/i915/gen9+: Add support for pipe background color

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for CRTC background color

[Patchwork]

== Series Details ==

Series: CRTC background color
URL   : https://patchwork.freedesktop.org/series/50834/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4966 -> Patchwork_10418 =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/50834/revisions/1/mbox/

== Known issues ==

  Here are the changes found in Patchwork_10418 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_suspend@basic-s4-devices:
      fi-kbl-7500u:       PASS -> DMESG-WARN (fdo#105128, fdo#107139)

    
    ==== Possible fixes ====

    igt@gem_exec_suspend@basic-s3:
      fi-cfl-8109u:       INCOMPLETE (fdo#107187, fdo#108126) -> PASS

    igt@kms_pipe_crc_basic@hang-read-crc-pipe-b:
      fi-byt-clapper:     FAIL (fdo#107362, fdo#103191) -> PASS +1

    igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b:
      fi-byt-clapper:     FAIL (fdo#107362) -> PASS

    
  fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
  fdo#105128 https://bugs.freedesktop.org/show_bug.cgi?id=105128
  fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
  fdo#107187 https://bugs.freedesktop.org/show_bug.cgi?id=107187
  fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
  fdo#108126 https://bugs.freedesktop.org/show_bug.cgi?id=108126


== Participating hosts (46 -> 41) ==

  Missing    (5): fi-ctg-p8600 fi-bsw-cyan fi-ilk-m540 fi-byt-squawks fi-icl-u2 


== Build changes ==

    * Linux: CI_DRM_4966 -> Patchwork_10418

  CI_DRM_4966: 0ac03a984dd32a77b02eabb6f0ef110ec5b5bdf2 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4673: 54cb1aeb4e50dea9f3abae632e317875d147c4ab @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_10418: a0be1f8ad993cd192497be261ebfcc25525018b9 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

a0be1f8ad993 drm/i915/gen9+: Add support for pipe background color
472f325f4ac4 drm: Add CRTC background color property

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10418/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for tests/kms_crtc_background_color: overhaul for latest ABI proposal

[Patchwork]

== Series Details ==

Series: tests/kms_crtc_background_color: overhaul for latest ABI proposal
URL   : https://patchwork.freedesktop.org/series/50835/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4958 -> IGTPW_1935 =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/50835/revisions/1/mbox/

== Known issues ==

  Here are the changes found in IGTPW_1935 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@amdgpu/amd_cs_nop@sync-fork-gfx0:
      fi-kbl-8809g:       PASS -> DMESG-WARN (fdo#107762)

    igt@kms_flip@basic-flip-vs-dpms:
      fi-hsw-4770r:       PASS -> DMESG-WARN (fdo#105602)

    
    ==== Possible fixes ====

    igt@pm_rpm@basic-pci-d3-state:
      fi-skl-6600u:       FAIL (fdo#107707) -> PASS

    igt@prime_vgem@basic-fence-flip:
      fi-ilk-650:         FAIL (fdo#104008) -> PASS

    
  fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
  fdo#105602 https://bugs.freedesktop.org/show_bug.cgi?id=105602
  fdo#107707 https://bugs.freedesktop.org/show_bug.cgi?id=107707
  fdo#107762 https://bugs.freedesktop.org/show_bug.cgi?id=107762


== Participating hosts (48 -> 41) ==

  Missing    (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-icl-u2 fi-bwr-2160 fi-bsw-cyan fi-ctg-p8600 


== Build changes ==

    * IGT: IGT_4672 -> IGTPW_1935

  CI_DRM_4958: 9990e1665029dc2ef4a9c0632b8a2f516263e595 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_1935: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1935/
  IGT_4672: 4497591d2572831a9f07fd9e48a2571bfcffe354 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1935/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.IGT: success for CRTC background color

[Patchwork]

== Series Details ==

Series: CRTC background color
URL   : https://patchwork.freedesktop.org/series/50834/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4966_full -> Patchwork_10418_full =

== Summary - WARNING ==

  Minor unknown changes coming with Patchwork_10418_full need to be verified
  manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_10418_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

== Possible new issues ==

  Here are the unknown changes that may have been introduced in Patchwork_10418_full:

  === IGT changes ===

    ==== Warnings ====

    igt@perf_pmu@rc6:
      shard-kbl:          PASS -> SKIP

    
== Known issues ==

  Here are the changes found in Patchwork_10418_full that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@gem_cpu_reloc@full:
      shard-skl:          NOTRUN -> INCOMPLETE (fdo#108073)

    igt@gem_ppgtt@blt-vs-render-ctx0:
      shard-skl:          NOTRUN -> TIMEOUT (fdo#108039)

    igt@kms_atomic_transition@2x-modeset-transitions-nonblocking-fencing:
      shard-glk:          PASS -> INCOMPLETE (k.org#198133, fdo#103359)

    igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-c:
      shard-skl:          NOTRUN -> DMESG-WARN (fdo#107956)
      shard-kbl:          PASS -> DMESG-WARN (fdo#107956)

    igt@kms_concurrent@pipe-b:
      shard-hsw:          PASS -> DMESG-WARN (fdo#102614)

    igt@kms_fbcon_fbt@psr:
      shard-skl:          NOTRUN -> FAIL (fdo#107882)

    igt@kms_flip@flip-vs-expired-vblank:
      shard-glk:          PASS -> FAIL (fdo#105363, fdo#102887)

    igt@kms_flip@plain-flip-ts-check:
      shard-skl:          PASS -> FAIL (fdo#100368)

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-cpu:
      shard-skl:          NOTRUN -> FAIL (fdo#103167)

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
      shard-apl:          PASS -> FAIL (fdo#103167) +3

    igt@kms_frontbuffer_tracking@fbc-1p-rte:
      shard-glk:          PASS -> FAIL (fdo#103167, fdo#105682)

    igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-wc:
      shard-glk:          PASS -> FAIL (fdo#103167) +4

    igt@kms_frontbuffer_tracking@fbc-stridechange:
      shard-skl:          NOTRUN -> FAIL (fdo#105683)

    igt@kms_plane@pixel-format-pipe-c-planes:
      shard-skl:          NOTRUN -> DMESG-FAIL (fdo#103166, fdo#106885)

    {igt@kms_plane_alpha_blend@pipe-c-alpha-opaque-fb}:
      shard-skl:          NOTRUN -> FAIL (fdo#108145)

    igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
      shard-apl:          PASS -> FAIL (fdo#103166) +1

    igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
      shard-glk:          PASS -> FAIL (fdo#103166)

    igt@pm_rpm@sysfs-read:
      shard-skl:          NOTRUN -> INCOMPLETE (fdo#107807)

    igt@pm_rpm@system-suspend-devices:
      shard-skl:          PASS -> INCOMPLETE (fdo#107807)

    
    ==== Possible fixes ====

    igt@kms_available_modes_crc@available_mode_test_crc:
      shard-apl:          FAIL (fdo#106641) -> PASS

    igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
      shard-glk:          FAIL (fdo#108145) -> PASS

    igt@kms_cursor_crc@cursor-128x128-random:
      shard-apl:          FAIL (fdo#103232) -> PASS +1

    igt@kms_cursor_crc@cursor-64x64-sliding:
      shard-glk:          FAIL (fdo#103232) -> PASS

    igt@kms_cursor_legacy@cursorb-vs-flipb-toggle:
      shard-glk:          DMESG-WARN (fdo#105763, fdo#106538) -> PASS +1

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
      shard-apl:          FAIL (fdo#103167) -> PASS +1

    igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-cpu:
      shard-glk:          FAIL (fdo#103167) -> PASS +3

    igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-cpu:
      shard-glk:          DMESG-FAIL (fdo#106538) -> PASS

    igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
      shard-apl:          FAIL (fdo#103166) -> PASS +1

    igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
      shard-glk:          FAIL (fdo#103166) -> PASS +3

    
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
  fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
  fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
  fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
  fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
  fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
  fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
  fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
  fdo#105682 https://bugs.freedesktop.org/show_bug.cgi?id=105682
  fdo#105683 https://bugs.freedesktop.org/show_bug.cgi?id=105683
  fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
  fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
  fdo#106641 https://bugs.freedesktop.org/show_bug.cgi?id=106641
  fdo#106885 https://bugs.freedesktop.org/show_bug.cgi?id=106885
  fdo#107807 https://bugs.freedesktop.org/show_bug.cgi?id=107807
  fdo#107882 https://bugs.freedesktop.org/show_bug.cgi?id=107882
  fdo#107956 https://bugs.freedesktop.org/show_bug.cgi?id=107956
  fdo#108039 https://bugs.freedesktop.org/show_bug.cgi?id=108039
  fdo#108073 https://bugs.freedesktop.org/show_bug.cgi?id=108073
  fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
  k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133


== Participating hosts (6 -> 6) ==

  No changes in participating hosts


== Build changes ==

    * Linux: CI_DRM_4966 -> Patchwork_10418

  CI_DRM_4966: 0ac03a984dd32a77b02eabb6f0ef110ec5b5bdf2 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4673: 54cb1aeb4e50dea9f3abae632e317875d147c4ab @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_10418: a0be1f8ad993cd192497be261ebfcc25525018b9 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_10418/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.IGT: failure for tests/kms_crtc_background_color: overhaul for latest ABI proposal

[Patchwork]

== Series Details ==

Series: tests/kms_crtc_background_color: overhaul for latest ABI proposal
URL   : https://patchwork.freedesktop.org/series/50835/
State : failure

== Summary ==

= CI Bug Log - changes from IGT_4672_full -> IGTPW_1935_full =

== Summary - FAILURE ==

  Serious unknown changes coming with IGTPW_1935_full absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in IGTPW_1935_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/50835/revisions/1/mbox/

== Possible new issues ==

  Here are the unknown changes that may have been introduced in IGTPW_1935_full:

  === IGT changes ===

    ==== Possible regressions ====

    igt@gem_eio@in-flight-suspend:
      shard-glk:          PASS -> FAIL

    
    ==== Warnings ====

    igt@pm_rc6_residency@rc6-accuracy:
      shard-kbl:          PASS -> SKIP +1

    
== Known issues ==

  Here are the changes found in IGTPW_1935_full that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@kms_cursor_crc@cursor-128x42-random:
      shard-apl:          PASS -> FAIL (fdo#103232)

    igt@kms_cursor_crc@cursor-64x21-onscreen:
      shard-glk:          PASS -> FAIL (fdo#103232)

    igt@kms_cursor_crc@cursor-64x64-suspend:
      shard-kbl:          PASS -> FAIL (fdo#103191, fdo#103232)

    igt@kms_cursor_legacy@cursorb-vs-flipb-toggle:
      shard-glk:          PASS -> DMESG-WARN (fdo#106538, fdo#105763) +2

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
      shard-apl:          PASS -> FAIL (fdo#103167) +4

    igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-blt:
      shard-glk:          PASS -> DMESG-FAIL (fdo#106538)

    igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-cpu:
      shard-glk:          PASS -> FAIL (fdo#103167) +2

    {igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max}:
      shard-glk:          PASS -> FAIL (fdo#108145)
      shard-kbl:          PASS -> FAIL (fdo#108145)
      shard-apl:          PASS -> FAIL (fdo#108145)

    igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
      shard-apl:          PASS -> FAIL (fdo#103166) +1

    igt@perf@blocking:
      shard-hsw:          PASS -> FAIL (fdo#102252)

    igt@prime_mmap@test_refcounting:
      shard-snb:          PASS -> INCOMPLETE (fdo#105411)

    
    ==== Possible fixes ====

    igt@kms_available_modes_crc@available_mode_test_crc:
      shard-apl:          FAIL (fdo#106641) -> PASS

    igt@kms_cursor_crc@cursor-128x42-onscreen:
      shard-apl:          FAIL (fdo#103232) -> PASS +2

    igt@kms_cursor_crc@cursor-256x256-sliding:
      shard-glk:          FAIL (fdo#103232) -> PASS +3

    igt@kms_cursor_crc@cursor-64x64-sliding:
      shard-kbl:          FAIL (fdo#103232) -> PASS

    igt@kms_cursor_legacy@2x-long-cursor-vs-flip-atomic:
      shard-hsw:          FAIL (fdo#105767) -> PASS

    igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-wc:
      shard-apl:          FAIL (fdo#103167) -> PASS

    igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-wc:
      shard-glk:          FAIL (fdo#103167) -> PASS +1

    igt@kms_plane@plane-position-covered-pipe-a-planes:
      shard-glk:          FAIL (fdo#103166) -> PASS +3

    {igt@kms_plane_alpha_blend@pipe-b-constant-alpha-max}:
      shard-glk:          FAIL (fdo#108145) -> PASS +1
      shard-apl:          FAIL (fdo#108145) -> PASS
      shard-kbl:          FAIL (fdo#108145) -> PASS

    igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
      shard-apl:          FAIL (fdo#103166) -> PASS +2

    
    ==== Warnings ====

    igt@kms_cursor_crc@cursor-64x64-suspend:
      shard-glk:          INCOMPLETE (k.org#198133, fdo#103359) -> FAIL (fdo#103232)

    
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
  fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
  fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
  fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
  fdo#103232 https://bugs.freedesktop.org/show_bug.cgi?id=103232
  fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
  fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
  fdo#105763 https://bugs.freedesktop.org/show_bug.cgi?id=105763
  fdo#105767 https://bugs.freedesktop.org/show_bug.cgi?id=105767
  fdo#106538 https://bugs.freedesktop.org/show_bug.cgi?id=106538
  fdo#106641 https://bugs.freedesktop.org/show_bug.cgi?id=106641
  fdo#108145 https://bugs.freedesktop.org/show_bug.cgi?id=108145
  k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133


== Participating hosts (6 -> 5) ==

  Missing    (1): shard-skl 


== Build changes ==

    * IGT: IGT_4672 -> IGTPW_1935
    * Linux: CI_DRM_4952 -> CI_DRM_4958

  CI_DRM_4952: a62e43ba13605a478b22307ea1790d48aea029a6 @ git://anongit.freedesktop.org/gfx-ci/linux
  CI_DRM_4958: 9990e1665029dc2ef4a9c0632b8a2f516263e595 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_1935: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1935/
  IGT_4672: 4497591d2572831a9f07fd9e48a2571bfcffe354 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1935/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 0/2] Add "BACKGROUND_COLOR" drm property

[Raphael GALLAIS-POU - foss]

Hello,

This series aims to add a generic background color property for CRTC as
discussed in the conversation:
https://patchwork.freedesktop.org/patch/439585/

This patch "drm: add crtc background color property" is strongly inspired
of Matthew Roper's.  Please see:
https://patchwork.freedesktop.org/patch/333632/

Raphael Gallais-Pou (2):
  drm: add crtc background color property
  drm/stm: ltdc: add crtc background color property support

 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++
 drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++-
 drivers/gpu/drm/drm_mode_config.c         |  6 +++
 drivers/gpu/drm/stm/ltdc.c                | 48 ++++++++++++++++++++---
 include/drm/drm_blend.h                   |  1 +
 include/drm/drm_crtc.h                    | 12 ++++++
 include/drm/drm_mode_config.h             |  5 +++
 include/uapi/drm/drm_mode.h               | 28 +++++++++++++
 9 files changed, 132 insertions(+), 7 deletions(-)

-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] drm: add crtc background color property

[Raphael GALLAIS-POU - foss]

Some display controllers can be programmed to present non-black colors
for pixels not covered by any plane (or pixels covered by the
transparent regions of higher planes).  Compositors that want a UI with
a solid color background can potentially save memory bandwidth by
setting the CRTC background property and using smaller planes to display
the rest of the content.

To avoid confusion between different ways of encoding RGB data, we
define a standard 64-bit format that should be used for this property's
value.  Helper functions and macros are provided to generate and dissect
values in this standard format with varying component precision values.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
 drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
 drivers/gpu/drm/drm_mode_config.c         |  6 ++++
 include/drm/drm_blend.h                   |  1 +
 include/drm/drm_crtc.h                    | 12 ++++++++
 include/drm/drm_mode_config.h             |  5 ++++
 include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
 8 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index ddcf5c2c8e6a..1b95a4ecdb2b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
 				     struct drm_crtc *crtc)
 {
 	crtc_state->crtc = crtc;
+	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 438e9585b225..fea68f8f17f8 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
 	} else if (property == crtc->scaling_filter_property) {
 		state->scaling_filter = val;
+	} else if (property == config->bgcolor_property) {
+		state->bgcolor = val;
 	} else if (crtc->funcs->atomic_set_property) {
 		return crtc->funcs->atomic_set_property(crtc, state, property, val);
 	} else {
@@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = 0;
 	else if (property == crtc->scaling_filter_property)
 		*val = state->scaling_filter;
+	else if (property == config->bgcolor_property)
+		*val = state->bgcolor;
 	else if (crtc->funcs->atomic_get_property)
 		return crtc->funcs->atomic_get_property(crtc, state, property, val);
 	else
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index ec37cbfabb50..6692d6a6db22 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -186,8 +186,7 @@
  *		 assumed to be 1.0
  *
  * Note that all the property extensions described here apply either to the
- * plane or the CRTC (e.g. for the background color, which currently is not
- * exposed and assumed to be black).
+ * plane or the CRTC.
  *
  * SCALING_FILTER:
  *     Indicates scaling filter to be used for plane scaler
@@ -201,6 +200,21 @@
  *
  * Drivers can set up this property for a plane by calling
  * drm_plane_create_scaling_filter_property
+ *
+ * BACKGROUND_COLOR:
+ *	Defines the ARGB color of a full-screen layer that exists below all
+ *	planes.  This color will be used for pixels not covered by any plane
+ *	and may also be blended with plane contents as allowed by a plane's
+ *	alpha values.  The background color defaults to black, and is assumed
+ *	to be black for drivers that do not expose this property.  Although
+ *	background color isn't a plane, it is assumed that the color provided
+ *	here undergoes the same pipe-level degamma/CSC/gamma transformations
+ *	that planes undergo.  Note that the color value provided here includes
+ *	an alpha channel...non-opaque background color values are allowed,
+ *	but are generally only honored in special cases (e.g., when a memory
+ *	writeback connector is in use).
+ *
+ *	This property is setup with drm_crtc_add_bgcolor_property().
  */
 
 /**
@@ -616,3 +630,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 	return 0;
 }
 EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
+
+/**
+ * drm_crtc_add_bgcolor_property - add background color property
+ * @crtc: drm crtc
+ *
+ * Adds the background color property to @crtc.  The property defaults to
+ * solid black and will accept 64-bit ARGB values in the format generated by
+ * drm_argb().
+ */
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc)
+{
+	drm_object_attach_property(&crtc->base,
+				   crtc->dev->mode_config.bgcolor_property,
+				   drm_argb(16, 0xffff, 0, 0, 0));
+}
+EXPORT_SYMBOL(drm_crtc_add_bgcolor_property);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 37b4b9f0e468..d62d6585399b 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -371,6 +371,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.modifiers_property = prop;
 
+	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",
+					 0, GENMASK_ULL(63, 0));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.bgcolor_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 88bdfec3bd88..9e2538dd7b9a 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -58,4 +58,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
 int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 					 unsigned int supported_modes);
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc);
 #endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 13eeba2a750a..12601eb63c45 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -288,6 +288,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @bgcolor:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built via drm_argb();
+	 * individual color components can be extracted with desired precision
+	 * via the DRM_ARGB_*() macros.
+	 */
+	u64 bgcolor;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 1ddf7783fdf7..76c491d10d8d 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -867,6 +867,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *hdcp_content_type_property;
 
+	/**
+	 * @bgcolor_property: RGB background color for CRTC.
+	 */
+	struct drm_property *bgcolor_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 98bf130feda5..035f06c6750e 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -1154,6 +1154,34 @@ struct drm_mode_rect {
 	__s32 y2;
 };
 
+/*
+ * Put ARGB values into a standard 64-bit representation that can be used
+ * for ioctl parameters, inter-driver commmunication, etc.  If the component
+ * values being provided contain less than 16 bits of precision, they'll
+ * be shifted into the most significant bits.
+ */
+static inline __u64
+drm_argb(__u8 bpc, __u16 alpha, __u16 red, __u16 green, __u16 blue)
+{
+	int msb_shift = 16 - bpc;
+
+	return (__u64)alpha << msb_shift << 48 |
+	       (__u64)red   << msb_shift << 32 |
+	       (__u64)green << msb_shift << 16 |
+	       (__u64)blue  << msb_shift;
+}
+
+/*
+ * Extract the specified number of bits of a specific color component from a
+ * standard 64-bit ARGB value.
+ */
+#define DRM_ARGB_COMP(c, shift, numbits) \
+	((__u16)(((c) & 0xFFFFull << (shift)) >> ((shift) + 16 - (numbits))))
+#define DRM_ARGB_BLUE(c, numbits)  DRM_ARGB_COMP(c, 0, numbits)
+#define DRM_ARGB_GREEN(c, numbits) DRM_ARGB_COMP(c, 16, numbits)
+#define DRM_ARGB_RED(c, numbits)   DRM_ARGB_COMP(c, 32, numbits)
+#define DRM_ARGB_ALPHA(c, numbits) DRM_ARGB_COMP(c, 48, numbits)
+
 #if defined(__cplusplus)
 }
 #endif
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] drm: add crtc background color property

[Raphael GALLAIS-POU - foss]

Some display controllers can be programmed to present non-black colors
for pixels not covered by any plane (or pixels covered by the
transparent regions of higher planes).  Compositors that want a UI with
a solid color background can potentially save memory bandwidth by
setting the CRTC background property and using smaller planes to display
the rest of the content.

To avoid confusion between different ways of encoding RGB data, we
define a standard 64-bit format that should be used for this property's
value.  Helper functions and macros are provided to generate and dissect
values in this standard format with varying component precision values.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
 drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
 drivers/gpu/drm/drm_mode_config.c         |  6 ++++
 include/drm/drm_blend.h                   |  1 +
 include/drm/drm_crtc.h                    | 12 ++++++++
 include/drm/drm_mode_config.h             |  5 ++++
 include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
 8 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index ddcf5c2c8e6a..1b95a4ecdb2b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
 				     struct drm_crtc *crtc)
 {
 	crtc_state->crtc = crtc;
+	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 438e9585b225..fea68f8f17f8 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
 	} else if (property == crtc->scaling_filter_property) {
 		state->scaling_filter = val;
+	} else if (property == config->bgcolor_property) {
+		state->bgcolor = val;
 	} else if (crtc->funcs->atomic_set_property) {
 		return crtc->funcs->atomic_set_property(crtc, state, property, val);
 	} else {
@@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = 0;
 	else if (property == crtc->scaling_filter_property)
 		*val = state->scaling_filter;
+	else if (property == config->bgcolor_property)
+		*val = state->bgcolor;
 	else if (crtc->funcs->atomic_get_property)
 		return crtc->funcs->atomic_get_property(crtc, state, property, val);
 	else
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index ec37cbfabb50..6692d6a6db22 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -186,8 +186,7 @@
  *		 assumed to be 1.0
  *
  * Note that all the property extensions described here apply either to the
- * plane or the CRTC (e.g. for the background color, which currently is not
- * exposed and assumed to be black).
+ * plane or the CRTC.
  *
  * SCALING_FILTER:
  *     Indicates scaling filter to be used for plane scaler
@@ -201,6 +200,21 @@
  *
  * Drivers can set up this property for a plane by calling
  * drm_plane_create_scaling_filter_property
+ *
+ * BACKGROUND_COLOR:
+ *	Defines the ARGB color of a full-screen layer that exists below all
+ *	planes.  This color will be used for pixels not covered by any plane
+ *	and may also be blended with plane contents as allowed by a plane's
+ *	alpha values.  The background color defaults to black, and is assumed
+ *	to be black for drivers that do not expose this property.  Although
+ *	background color isn't a plane, it is assumed that the color provided
+ *	here undergoes the same pipe-level degamma/CSC/gamma transformations
+ *	that planes undergo.  Note that the color value provided here includes
+ *	an alpha channel...non-opaque background color values are allowed,
+ *	but are generally only honored in special cases (e.g., when a memory
+ *	writeback connector is in use).
+ *
+ *	This property is setup with drm_crtc_add_bgcolor_property().
  */
 
 /**
@@ -616,3 +630,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 	return 0;
 }
 EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
+
+/**
+ * drm_crtc_add_bgcolor_property - add background color property
+ * @crtc: drm crtc
+ *
+ * Adds the background color property to @crtc.  The property defaults to
+ * solid black and will accept 64-bit ARGB values in the format generated by
+ * drm_argb().
+ */
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc)
+{
+	drm_object_attach_property(&crtc->base,
+				   crtc->dev->mode_config.bgcolor_property,
+				   drm_argb(16, 0xffff, 0, 0, 0));
+}
+EXPORT_SYMBOL(drm_crtc_add_bgcolor_property);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 37b4b9f0e468..d62d6585399b 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -371,6 +371,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.modifiers_property = prop;
 
+	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",
+					 0, GENMASK_ULL(63, 0));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.bgcolor_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 88bdfec3bd88..9e2538dd7b9a 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -58,4 +58,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
 int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 					 unsigned int supported_modes);
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc);
 #endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 13eeba2a750a..12601eb63c45 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -288,6 +288,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @bgcolor:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built via drm_argb();
+	 * individual color components can be extracted with desired precision
+	 * via the DRM_ARGB_*() macros.
+	 */
+	u64 bgcolor;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 1ddf7783fdf7..76c491d10d8d 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -867,6 +867,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *hdcp_content_type_property;
 
+	/**
+	 * @bgcolor_property: RGB background color for CRTC.
+	 */
+	struct drm_property *bgcolor_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 98bf130feda5..035f06c6750e 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -1154,6 +1154,34 @@ struct drm_mode_rect {
 	__s32 y2;
 };
 
+/*
+ * Put ARGB values into a standard 64-bit representation that can be used
+ * for ioctl parameters, inter-driver commmunication, etc.  If the component
+ * values being provided contain less than 16 bits of precision, they'll
+ * be shifted into the most significant bits.
+ */
+static inline __u64
+drm_argb(__u8 bpc, __u16 alpha, __u16 red, __u16 green, __u16 blue)
+{
+	int msb_shift = 16 - bpc;
+
+	return (__u64)alpha << msb_shift << 48 |
+	       (__u64)red   << msb_shift << 32 |
+	       (__u64)green << msb_shift << 16 |
+	       (__u64)blue  << msb_shift;
+}
+
+/*
+ * Extract the specified number of bits of a specific color component from a
+ * standard 64-bit ARGB value.
+ */
+#define DRM_ARGB_COMP(c, shift, numbits) \
+	((__u16)(((c) & 0xFFFFull << (shift)) >> ((shift) + 16 - (numbits))))
+#define DRM_ARGB_BLUE(c, numbits)  DRM_ARGB_COMP(c, 0, numbits)
+#define DRM_ARGB_GREEN(c, numbits) DRM_ARGB_COMP(c, 16, numbits)
+#define DRM_ARGB_RED(c, numbits)   DRM_ARGB_COMP(c, 32, numbits)
+#define DRM_ARGB_ALPHA(c, numbits) DRM_ARGB_COMP(c, 48, numbits)
+
 #if defined(__cplusplus)
 }
 #endif
-- 
2.17.1

[PATCH 1/2] drm: add crtc background color property

[Raphael GALLAIS-POU - foss]

Some display controllers can be programmed to present non-black colors
for pixels not covered by any plane (or pixels covered by the
transparent regions of higher planes).  Compositors that want a UI with
a solid color background can potentially save memory bandwidth by
setting the CRTC background property and using smaller planes to display
the rest of the content.

To avoid confusion between different ways of encoding RGB data, we
define a standard 64-bit format that should be used for this property's
value.  Helper functions and macros are provided to generate and dissect
values in this standard format with varying component precision values.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
 drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
 drivers/gpu/drm/drm_mode_config.c         |  6 ++++
 include/drm/drm_blend.h                   |  1 +
 include/drm/drm_crtc.h                    | 12 ++++++++
 include/drm/drm_mode_config.h             |  5 ++++
 include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
 8 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index ddcf5c2c8e6a..1b95a4ecdb2b 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
 				     struct drm_crtc *crtc)
 {
 	crtc_state->crtc = crtc;
+	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 438e9585b225..fea68f8f17f8 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
 	} else if (property == crtc->scaling_filter_property) {
 		state->scaling_filter = val;
+	} else if (property == config->bgcolor_property) {
+		state->bgcolor = val;
 	} else if (crtc->funcs->atomic_set_property) {
 		return crtc->funcs->atomic_set_property(crtc, state, property, val);
 	} else {
@@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = 0;
 	else if (property == crtc->scaling_filter_property)
 		*val = state->scaling_filter;
+	else if (property == config->bgcolor_property)
+		*val = state->bgcolor;
 	else if (crtc->funcs->atomic_get_property)
 		return crtc->funcs->atomic_get_property(crtc, state, property, val);
 	else
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index ec37cbfabb50..6692d6a6db22 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -186,8 +186,7 @@
  *		 assumed to be 1.0
  *
  * Note that all the property extensions described here apply either to the
- * plane or the CRTC (e.g. for the background color, which currently is not
- * exposed and assumed to be black).
+ * plane or the CRTC.
  *
  * SCALING_FILTER:
  *     Indicates scaling filter to be used for plane scaler
@@ -201,6 +200,21 @@
  *
  * Drivers can set up this property for a plane by calling
  * drm_plane_create_scaling_filter_property
+ *
+ * BACKGROUND_COLOR:
+ *	Defines the ARGB color of a full-screen layer that exists below all
+ *	planes.  This color will be used for pixels not covered by any plane
+ *	and may also be blended with plane contents as allowed by a plane's
+ *	alpha values.  The background color defaults to black, and is assumed
+ *	to be black for drivers that do not expose this property.  Although
+ *	background color isn't a plane, it is assumed that the color provided
+ *	here undergoes the same pipe-level degamma/CSC/gamma transformations
+ *	that planes undergo.  Note that the color value provided here includes
+ *	an alpha channel...non-opaque background color values are allowed,
+ *	but are generally only honored in special cases (e.g., when a memory
+ *	writeback connector is in use).
+ *
+ *	This property is setup with drm_crtc_add_bgcolor_property().
  */
 
 /**
@@ -616,3 +630,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 	return 0;
 }
 EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
+
+/**
+ * drm_crtc_add_bgcolor_property - add background color property
+ * @crtc: drm crtc
+ *
+ * Adds the background color property to @crtc.  The property defaults to
+ * solid black and will accept 64-bit ARGB values in the format generated by
+ * drm_argb().
+ */
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc)
+{
+	drm_object_attach_property(&crtc->base,
+				   crtc->dev->mode_config.bgcolor_property,
+				   drm_argb(16, 0xffff, 0, 0, 0));
+}
+EXPORT_SYMBOL(drm_crtc_add_bgcolor_property);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 37b4b9f0e468..d62d6585399b 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -371,6 +371,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.modifiers_property = prop;
 
+	prop = drm_property_create_range(dev, 0, "BACKGROUND_COLOR",
+					 0, GENMASK_ULL(63, 0));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.bgcolor_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 88bdfec3bd88..9e2538dd7b9a 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -58,4 +58,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
 int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 					 unsigned int supported_modes);
+void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc);
 #endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 13eeba2a750a..12601eb63c45 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -288,6 +288,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @bgcolor:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built via drm_argb();
+	 * individual color components can be extracted with desired precision
+	 * via the DRM_ARGB_*() macros.
+	 */
+	u64 bgcolor;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 1ddf7783fdf7..76c491d10d8d 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -867,6 +867,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *hdcp_content_type_property;
 
+	/**
+	 * @bgcolor_property: RGB background color for CRTC.
+	 */
+	struct drm_property *bgcolor_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 98bf130feda5..035f06c6750e 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -1154,6 +1154,34 @@ struct drm_mode_rect {
 	__s32 y2;
 };
 
+/*
+ * Put ARGB values into a standard 64-bit representation that can be used
+ * for ioctl parameters, inter-driver commmunication, etc.  If the component
+ * values being provided contain less than 16 bits of precision, they'll
+ * be shifted into the most significant bits.
+ */
+static inline __u64
+drm_argb(__u8 bpc, __u16 alpha, __u16 red, __u16 green, __u16 blue)
+{
+	int msb_shift = 16 - bpc;
+
+	return (__u64)alpha << msb_shift << 48 |
+	       (__u64)red   << msb_shift << 32 |
+	       (__u64)green << msb_shift << 16 |
+	       (__u64)blue  << msb_shift;
+}
+
+/*
+ * Extract the specified number of bits of a specific color component from a
+ * standard 64-bit ARGB value.
+ */
+#define DRM_ARGB_COMP(c, shift, numbits) \
+	((__u16)(((c) & 0xFFFFull << (shift)) >> ((shift) + 16 - (numbits))))
+#define DRM_ARGB_BLUE(c, numbits)  DRM_ARGB_COMP(c, 0, numbits)
+#define DRM_ARGB_GREEN(c, numbits) DRM_ARGB_COMP(c, 16, numbits)
+#define DRM_ARGB_RED(c, numbits)   DRM_ARGB_COMP(c, 32, numbits)
+#define DRM_ARGB_ALPHA(c, numbits) DRM_ARGB_COMP(c, 48, numbits)
+
 #if defined(__cplusplus)
 }
 #endif
-- 
2.17.1

Re: [PATCH 1/2] drm: add crtc background color property

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3065 bytes --]

Hi Raphael,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on stm32/stm32-next]
[also build test WARNING on drm-intel/for-linux-next drm-tip/drm-tip linus/master v5.13 next-20210707]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Raphael-GALLAIS-POU-foss/Add-BACKGROUND_COLOR-drm-property/20210707-165106
base:   https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
config: arm-allyesconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/35653810f9b832626939f99268888da5cd6f497a
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Raphael-GALLAIS-POU-foss/Add-BACKGROUND_COLOR-drm-property/20210707-165106
        git checkout 35653810f9b832626939f99268888da5cd6f497a
        # save the attached .config to linux build tree
        mkdir build_dir
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross O=build_dir ARCH=arm SHELL=/bin/bash drivers/gpu/drm/omapdrm/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from drivers/gpu/drm/omapdrm/dss/dispc.c:33:
>> include/drm/drm_blend.h:61:43: warning: 'struct drm_crtc' declared inside parameter list will not be visible outside of this definition or declaration
      61 | void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc);
         |                                           ^~~~~~~~


vim +61 include/drm/drm_blend.h

    44	
    45	int drm_plane_create_alpha_property(struct drm_plane *plane);
    46	int drm_plane_create_rotation_property(struct drm_plane *plane,
    47					       unsigned int rotation,
    48					       unsigned int supported_rotations);
    49	unsigned int drm_rotation_simplify(unsigned int rotation,
    50					   unsigned int supported_rotations);
    51	
    52	int drm_plane_create_zpos_property(struct drm_plane *plane,
    53					   unsigned int zpos,
    54					   unsigned int min, unsigned int max);
    55	int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
    56						     unsigned int zpos);
    57	int drm_atomic_normalize_zpos(struct drm_device *dev,
    58				      struct drm_atomic_state *state);
    59	int drm_plane_create_blend_mode_property(struct drm_plane *plane,
    60						 unsigned int supported_modes);
  > 61	void drm_crtc_add_bgcolor_property(struct drm_crtc *crtc);

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 78566 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1.1: Type: text/plain, Size: 7081 bytes --]

On Wed, 7 Jul 2021 08:48:47 +0000
Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:

> Some display controllers can be programmed to present non-black colors
> for pixels not covered by any plane (or pixels covered by the
> transparent regions of higher planes).  Compositors that want a UI with
> a solid color background can potentially save memory bandwidth by
> setting the CRTC background property and using smaller planes to display
> the rest of the content.
> 
> To avoid confusion between different ways of encoding RGB data, we
> define a standard 64-bit format that should be used for this property's
> value.  Helper functions and macros are provided to generate and dissect
> values in this standard format with varying component precision values.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>  drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>  drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>  include/drm/drm_blend.h                   |  1 +
>  include/drm/drm_crtc.h                    | 12 ++++++++
>  include/drm/drm_mode_config.h             |  5 ++++
>  include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>  8 files changed, 89 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>  				     struct drm_crtc *crtc)
>  {
>  	crtc_state->crtc = crtc;
> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>  }
>  EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>  
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index 438e9585b225..fea68f8f17f8 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>  	} else if (property == crtc->scaling_filter_property) {
>  		state->scaling_filter = val;
> +	} else if (property == config->bgcolor_property) {
> +		state->bgcolor = val;
>  	} else if (crtc->funcs->atomic_set_property) {
>  		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>  	} else {
> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = 0;
>  	else if (property == crtc->scaling_filter_property)
>  		*val = state->scaling_filter;
> +	else if (property == config->bgcolor_property)
> +		*val = state->bgcolor;
>  	else if (crtc->funcs->atomic_get_property)
>  		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>  	else
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index ec37cbfabb50..6692d6a6db22 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -186,8 +186,7 @@
>   *		 assumed to be 1.0
>   *
>   * Note that all the property extensions described here apply either to the
> - * plane or the CRTC (e.g. for the background color, which currently is not
> - * exposed and assumed to be black).
> + * plane or the CRTC.
>   *
>   * SCALING_FILTER:
>   *     Indicates scaling filter to be used for plane scaler
> @@ -201,6 +200,21 @@
>   *
>   * Drivers can set up this property for a plane by calling
>   * drm_plane_create_scaling_filter_property
> + *

Hi,

I assume the below block is the UAPI documentation of this new property
and that it would appear with the other UAPI docs.

> + * BACKGROUND_COLOR:
> + *	Defines the ARGB color of a full-screen layer that exists below all
> + *	planes.  This color will be used for pixels not covered by any plane
> + *	and may also be blended with plane contents as allowed by a plane's
> + *	alpha values.  The background color defaults to black, and is assumed
> + *	to be black for drivers that do not expose this property.

All good up to here.

>  Although
> + *	background color isn't a plane, it is assumed that the color provided
> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> + *	that planes undergo.

This sounds to me like it refers to the per-plane degamma/csc/gamma
which are new properties in development. I believe you do not mean
that, but you mean the CRTC degamma/csc/gamma and everything else which
apply *after* the blending of planes. So the wording here would need
clarification.

>  Note that the color value provided here includes
> + *	an alpha channel...non-opaque background color values are allowed,
> + *	but are generally only honored in special cases (e.g., when a memory
> + *	writeback connector is in use).

This could be read as: if you use a non-opaque color value, it will
usually be completely ignored (and the background will be e.g. black
instead). Is that your intention?

I think a more useful definition would be that the alpha is used in
blending as always, but because we do not yet have physically
transparent monitors, the final alpha value may not reach the video
sink or the video sink may ignore it.

> + *
> + *	This property is setup with drm_crtc_add_bgcolor_property().

You forgot to document the value format of this property. The ARGB color
format needs to be defined at least to the same detail as all pixel
formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
definition already, simply saying the color is in that format would be
enough.

Another thing to document is whether this color value is alpha
pre-multiplied or not. Planes can have the property "pixel blend mode",
but because the background color is not on a plane, that property
cannot apply here.

The difference it makes is that if background color is both non-opaque
and pre-multiplied, then the question arises what pixel values will
actually be transmitted to video sink for the background. Will the
alpha pre-multiplication be undone?

Btw. note that "pixel blend mode" property does not document the use of
background alpha at all. So if the background color can have non-opaque
alpha, then you need to document the behavior in "pixel blend mode". It
also does not document what alpha value will result from blending, for
blending the next plane.

The question about full vs. limited range seems unnecessary to me, as
the background color will be used as-is in the blending stage, so
userspace can just program the correct value that fits the pipeline it
is setting up.

One more question is, as HDR exists, could we need background colors
with component values greater than 1.0?

Scanout of FP16 formats exists.

>   */


Thanks,
pq

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 7081 bytes --]

On Wed, 7 Jul 2021 08:48:47 +0000
Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:

> Some display controllers can be programmed to present non-black colors
> for pixels not covered by any plane (or pixels covered by the
> transparent regions of higher planes).  Compositors that want a UI with
> a solid color background can potentially save memory bandwidth by
> setting the CRTC background property and using smaller planes to display
> the rest of the content.
> 
> To avoid confusion between different ways of encoding RGB data, we
> define a standard 64-bit format that should be used for this property's
> value.  Helper functions and macros are provided to generate and dissect
> values in this standard format with varying component precision values.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>  drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>  drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>  include/drm/drm_blend.h                   |  1 +
>  include/drm/drm_crtc.h                    | 12 ++++++++
>  include/drm/drm_mode_config.h             |  5 ++++
>  include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>  8 files changed, 89 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>  				     struct drm_crtc *crtc)
>  {
>  	crtc_state->crtc = crtc;
> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>  }
>  EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>  
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index 438e9585b225..fea68f8f17f8 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>  	} else if (property == crtc->scaling_filter_property) {
>  		state->scaling_filter = val;
> +	} else if (property == config->bgcolor_property) {
> +		state->bgcolor = val;
>  	} else if (crtc->funcs->atomic_set_property) {
>  		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>  	} else {
> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = 0;
>  	else if (property == crtc->scaling_filter_property)
>  		*val = state->scaling_filter;
> +	else if (property == config->bgcolor_property)
> +		*val = state->bgcolor;
>  	else if (crtc->funcs->atomic_get_property)
>  		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>  	else
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index ec37cbfabb50..6692d6a6db22 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -186,8 +186,7 @@
>   *		 assumed to be 1.0
>   *
>   * Note that all the property extensions described here apply either to the
> - * plane or the CRTC (e.g. for the background color, which currently is not
> - * exposed and assumed to be black).
> + * plane or the CRTC.
>   *
>   * SCALING_FILTER:
>   *     Indicates scaling filter to be used for plane scaler
> @@ -201,6 +200,21 @@
>   *
>   * Drivers can set up this property for a plane by calling
>   * drm_plane_create_scaling_filter_property
> + *

Hi,

I assume the below block is the UAPI documentation of this new property
and that it would appear with the other UAPI docs.

> + * BACKGROUND_COLOR:
> + *	Defines the ARGB color of a full-screen layer that exists below all
> + *	planes.  This color will be used for pixels not covered by any plane
> + *	and may also be blended with plane contents as allowed by a plane's
> + *	alpha values.  The background color defaults to black, and is assumed
> + *	to be black for drivers that do not expose this property.

All good up to here.

>  Although
> + *	background color isn't a plane, it is assumed that the color provided
> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> + *	that planes undergo.

This sounds to me like it refers to the per-plane degamma/csc/gamma
which are new properties in development. I believe you do not mean
that, but you mean the CRTC degamma/csc/gamma and everything else which
apply *after* the blending of planes. So the wording here would need
clarification.

>  Note that the color value provided here includes
> + *	an alpha channel...non-opaque background color values are allowed,
> + *	but are generally only honored in special cases (e.g., when a memory
> + *	writeback connector is in use).

This could be read as: if you use a non-opaque color value, it will
usually be completely ignored (and the background will be e.g. black
instead). Is that your intention?

I think a more useful definition would be that the alpha is used in
blending as always, but because we do not yet have physically
transparent monitors, the final alpha value may not reach the video
sink or the video sink may ignore it.

> + *
> + *	This property is setup with drm_crtc_add_bgcolor_property().

You forgot to document the value format of this property. The ARGB color
format needs to be defined at least to the same detail as all pixel
formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
definition already, simply saying the color is in that format would be
enough.

Another thing to document is whether this color value is alpha
pre-multiplied or not. Planes can have the property "pixel blend mode",
but because the background color is not on a plane, that property
cannot apply here.

The difference it makes is that if background color is both non-opaque
and pre-multiplied, then the question arises what pixel values will
actually be transmitted to video sink for the background. Will the
alpha pre-multiplication be undone?

Btw. note that "pixel blend mode" property does not document the use of
background alpha at all. So if the background color can have non-opaque
alpha, then you need to document the behavior in "pixel blend mode". It
also does not document what alpha value will result from blending, for
blending the next plane.

The question about full vs. limited range seems unnecessary to me, as
the background color will be used as-is in the blending stage, so
userspace can just program the correct value that fits the pipeline it
is setting up.

One more question is, as HDR exists, could we need background colors
with component values greater than 1.0?

Scanout of FP16 formats exists.

>   */


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 7081 bytes --]

On Wed, 7 Jul 2021 08:48:47 +0000
Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:

> Some display controllers can be programmed to present non-black colors
> for pixels not covered by any plane (or pixels covered by the
> transparent regions of higher planes).  Compositors that want a UI with
> a solid color background can potentially save memory bandwidth by
> setting the CRTC background property and using smaller planes to display
> the rest of the content.
> 
> To avoid confusion between different ways of encoding RGB data, we
> define a standard 64-bit format that should be used for this property's
> value.  Helper functions and macros are provided to generate and dissect
> values in this standard format with varying component precision values.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>  drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>  drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>  include/drm/drm_blend.h                   |  1 +
>  include/drm/drm_crtc.h                    | 12 ++++++++
>  include/drm/drm_mode_config.h             |  5 ++++
>  include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>  8 files changed, 89 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>  				     struct drm_crtc *crtc)
>  {
>  	crtc_state->crtc = crtc;
> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>  }
>  EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>  
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index 438e9585b225..fea68f8f17f8 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>  	} else if (property == crtc->scaling_filter_property) {
>  		state->scaling_filter = val;
> +	} else if (property == config->bgcolor_property) {
> +		state->bgcolor = val;
>  	} else if (crtc->funcs->atomic_set_property) {
>  		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>  	} else {
> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = 0;
>  	else if (property == crtc->scaling_filter_property)
>  		*val = state->scaling_filter;
> +	else if (property == config->bgcolor_property)
> +		*val = state->bgcolor;
>  	else if (crtc->funcs->atomic_get_property)
>  		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>  	else
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index ec37cbfabb50..6692d6a6db22 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -186,8 +186,7 @@
>   *		 assumed to be 1.0
>   *
>   * Note that all the property extensions described here apply either to the
> - * plane or the CRTC (e.g. for the background color, which currently is not
> - * exposed and assumed to be black).
> + * plane or the CRTC.
>   *
>   * SCALING_FILTER:
>   *     Indicates scaling filter to be used for plane scaler
> @@ -201,6 +200,21 @@
>   *
>   * Drivers can set up this property for a plane by calling
>   * drm_plane_create_scaling_filter_property
> + *

Hi,

I assume the below block is the UAPI documentation of this new property
and that it would appear with the other UAPI docs.

> + * BACKGROUND_COLOR:
> + *	Defines the ARGB color of a full-screen layer that exists below all
> + *	planes.  This color will be used for pixels not covered by any plane
> + *	and may also be blended with plane contents as allowed by a plane's
> + *	alpha values.  The background color defaults to black, and is assumed
> + *	to be black for drivers that do not expose this property.

All good up to here.

>  Although
> + *	background color isn't a plane, it is assumed that the color provided
> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> + *	that planes undergo.

This sounds to me like it refers to the per-plane degamma/csc/gamma
which are new properties in development. I believe you do not mean
that, but you mean the CRTC degamma/csc/gamma and everything else which
apply *after* the blending of planes. So the wording here would need
clarification.

>  Note that the color value provided here includes
> + *	an alpha channel...non-opaque background color values are allowed,
> + *	but are generally only honored in special cases (e.g., when a memory
> + *	writeback connector is in use).

This could be read as: if you use a non-opaque color value, it will
usually be completely ignored (and the background will be e.g. black
instead). Is that your intention?

I think a more useful definition would be that the alpha is used in
blending as always, but because we do not yet have physically
transparent monitors, the final alpha value may not reach the video
sink or the video sink may ignore it.

> + *
> + *	This property is setup with drm_crtc_add_bgcolor_property().

You forgot to document the value format of this property. The ARGB color
format needs to be defined at least to the same detail as all pixel
formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
definition already, simply saying the color is in that format would be
enough.

Another thing to document is whether this color value is alpha
pre-multiplied or not. Planes can have the property "pixel blend mode",
but because the background color is not on a plane, that property
cannot apply here.

The difference it makes is that if background color is both non-opaque
and pre-multiplied, then the question arises what pixel values will
actually be transmitted to video sink for the background. Will the
alpha pre-multiplication be undone?

Btw. note that "pixel blend mode" property does not document the use of
background alpha at all. So if the background color can have non-opaque
alpha, then you need to document the behavior in "pixel blend mode". It
also does not document what alpha value will result from blending, for
blending the next plane.

The question about full vs. limited range seems unnecessary to me, as
the background color will be used as-is in the blending stage, so
userspace can just program the correct value that fits the pipeline it
is setting up.

One more question is, as HDR exists, could we need background colors
with component values greater than 1.0?

Scanout of FP16 formats exists.

>   */


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Raphael Gallais-Pou]

On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> On Wed, 7 Jul 2021 08:48:47 +0000
> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>
>> Some display controllers can be programmed to present non-black colors
>> for pixels not covered by any plane (or pixels covered by the
>> transparent regions of higher planes).  Compositors that want a UI with
>> a solid color background can potentially save memory bandwidth by
>> setting the CRTC background property and using smaller planes to display
>> the rest of the content.
>>
>> To avoid confusion between different ways of encoding RGB data, we
>> define a standard 64-bit format that should be used for this property's
>> value.  Helper functions and macros are provided to generate and dissect
>> values in this standard format with varying component precision values.
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>> ---
>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>   include/drm/drm_blend.h                   |  1 +
>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>   include/drm/drm_mode_config.h             |  5 ++++
>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>   				     struct drm_crtc *crtc)
>>   {
>>   	crtc_state->crtc = crtc;
>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>   }
>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>   
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>> index 438e9585b225..fea68f8f17f8 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>   	} else if (property == crtc->scaling_filter_property) {
>>   		state->scaling_filter = val;
>> +	} else if (property == config->bgcolor_property) {
>> +		state->bgcolor = val;
>>   	} else if (crtc->funcs->atomic_set_property) {
>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>   	} else {
>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>   		*val = 0;
>>   	else if (property == crtc->scaling_filter_property)
>>   		*val = state->scaling_filter;
>> +	else if (property == config->bgcolor_property)
>> +		*val = state->bgcolor;
>>   	else if (crtc->funcs->atomic_get_property)
>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>   	else
>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>> index ec37cbfabb50..6692d6a6db22 100644
>> --- a/drivers/gpu/drm/drm_blend.c
>> +++ b/drivers/gpu/drm/drm_blend.c
>> @@ -186,8 +186,7 @@
>>    *		 assumed to be 1.0
>>    *
>>    * Note that all the property extensions described here apply either to the
>> - * plane or the CRTC (e.g. for the background color, which currently is not
>> - * exposed and assumed to be black).
>> + * plane or the CRTC.
>>    *
>>    * SCALING_FILTER:
>>    *     Indicates scaling filter to be used for plane scaler
>> @@ -201,6 +200,21 @@
>>    *
>>    * Drivers can set up this property for a plane by calling
>>    * drm_plane_create_scaling_filter_property
>> + *
> Hi,


Hi Pekka,


Many thanks for your feedback, your comments are taken into account for 
a v2.


>
> I assume the below block is the UAPI documentation of this new property
> and that it would appear with the other UAPI docs.
>
>> + * BACKGROUND_COLOR:
>> + *	Defines the ARGB color of a full-screen layer that exists below all
>> + *	planes.  This color will be used for pixels not covered by any plane
>> + *	and may also be blended with plane contents as allowed by a plane's
>> + *	alpha values.  The background color defaults to black, and is assumed
>> + *	to be black for drivers that do not expose this property.
> All good up to here.
>
>>   Although
>> + *	background color isn't a plane, it is assumed that the color provided
>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>> + *	that planes undergo.
> This sounds to me like it refers to the per-plane degamma/csc/gamma
> which are new properties in development. I believe you do not mean
> that, but you mean the CRTC degamma/csc/gamma and everything else which
> apply *after* the blending of planes. So the wording here would need
> clarification.


Yes, I was not sure about this, but it is effectively the general CRTC 
color correction which is applicable to the background color.

>
>>   Note that the color value provided here includes
>> + *	an alpha channel...non-opaque background color values are allowed,
>> + *	but are generally only honored in special cases (e.g., when a memory
>> + *	writeback connector is in use).
> This could be read as: if you use a non-opaque color value, it will
> usually be completely ignored (and the background will be e.g. black
> instead). Is that your intention?
>
> I think a more useful definition would be that the alpha is used in
> blending as always, but because we do not yet have physically
> transparent monitors, the final alpha value may not reach the video
> sink or the video sink may ignore it.

In our case, the hardware does not support alpha channel (as you can see 
the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).

For chip vendors who does support this feature, the video sink would get 
this transparency parameter. In the case where it is not, alpha channel 
would be ignored.


>> + *
>> + *	This property is setup with drm_crtc_add_bgcolor_property().
> You forgot to document the value format of this property. The ARGB color
> format needs to be defined at least to the same detail as all pixel
> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> definition already, simply saying the color is in that format would be
> enough.


Will do ! :)

I was thinking about the FourCC AR4H format. Have you something else in 
mind ?

>
> Another thing to document is whether this color value is alpha
> pre-multiplied or not. Planes can have the property "pixel blend mode",
> but because the background color is not on a plane, that property
> cannot apply here.
>
> The difference it makes is that if background color is both non-opaque
> and pre-multiplied, then the question arises what pixel values will
> actually be transmitted to video sink for the background. Will the
> alpha pre-multiplication be undone?
>
> Btw. note that "pixel blend mode" property does not document the use of
> background alpha at all. So if the background color can have non-opaque
> alpha, then you need to document the behavior in "pixel blend mode". It
> also does not document what alpha value will result from blending, for
> blending the next plane.

Those are questions that did not crossed my mind at all.

What would you suggest ? Instinctively I would say that in the case 
where there is a non-opaque background color,

alpha pre-multiplication would not be taken into account, although it is 
maybe not the best solution.

As I am not quite sure, I will lookup for this.


>
> The question about full vs. limited range seems unnecessary to me, as
> the background color will be used as-is in the blending stage, so
> userspace can just program the correct value that fits the pipeline it
> is setting up.
>
> One more question is, as HDR exists, could we need background colors
> with component values greater than 1.0?

AR4H color format should cover that case, isn't it ?



Regards,

Raphaël

>
> Scanout of FP16 formats exists.
>
>>    */
>
> Thanks,
> pq

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Raphael Gallais-Pou]

On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> On Wed, 7 Jul 2021 08:48:47 +0000
> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>
>> Some display controllers can be programmed to present non-black colors
>> for pixels not covered by any plane (or pixels covered by the
>> transparent regions of higher planes).  Compositors that want a UI with
>> a solid color background can potentially save memory bandwidth by
>> setting the CRTC background property and using smaller planes to display
>> the rest of the content.
>>
>> To avoid confusion between different ways of encoding RGB data, we
>> define a standard 64-bit format that should be used for this property's
>> value.  Helper functions and macros are provided to generate and dissect
>> values in this standard format with varying component precision values.
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>> ---
>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>   include/drm/drm_blend.h                   |  1 +
>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>   include/drm/drm_mode_config.h             |  5 ++++
>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>   				     struct drm_crtc *crtc)
>>   {
>>   	crtc_state->crtc = crtc;
>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>   }
>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>   
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>> index 438e9585b225..fea68f8f17f8 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>   	} else if (property == crtc->scaling_filter_property) {
>>   		state->scaling_filter = val;
>> +	} else if (property == config->bgcolor_property) {
>> +		state->bgcolor = val;
>>   	} else if (crtc->funcs->atomic_set_property) {
>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>   	} else {
>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>   		*val = 0;
>>   	else if (property == crtc->scaling_filter_property)
>>   		*val = state->scaling_filter;
>> +	else if (property == config->bgcolor_property)
>> +		*val = state->bgcolor;
>>   	else if (crtc->funcs->atomic_get_property)
>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>   	else
>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>> index ec37cbfabb50..6692d6a6db22 100644
>> --- a/drivers/gpu/drm/drm_blend.c
>> +++ b/drivers/gpu/drm/drm_blend.c
>> @@ -186,8 +186,7 @@
>>    *		 assumed to be 1.0
>>    *
>>    * Note that all the property extensions described here apply either to the
>> - * plane or the CRTC (e.g. for the background color, which currently is not
>> - * exposed and assumed to be black).
>> + * plane or the CRTC.
>>    *
>>    * SCALING_FILTER:
>>    *     Indicates scaling filter to be used for plane scaler
>> @@ -201,6 +200,21 @@
>>    *
>>    * Drivers can set up this property for a plane by calling
>>    * drm_plane_create_scaling_filter_property
>> + *
> Hi,


Hi Pekka,


Many thanks for your feedback, your comments are taken into account for 
a v2.


>
> I assume the below block is the UAPI documentation of this new property
> and that it would appear with the other UAPI docs.
>
>> + * BACKGROUND_COLOR:
>> + *	Defines the ARGB color of a full-screen layer that exists below all
>> + *	planes.  This color will be used for pixels not covered by any plane
>> + *	and may also be blended with plane contents as allowed by a plane's
>> + *	alpha values.  The background color defaults to black, and is assumed
>> + *	to be black for drivers that do not expose this property.
> All good up to here.
>
>>   Although
>> + *	background color isn't a plane, it is assumed that the color provided
>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>> + *	that planes undergo.
> This sounds to me like it refers to the per-plane degamma/csc/gamma
> which are new properties in development. I believe you do not mean
> that, but you mean the CRTC degamma/csc/gamma and everything else which
> apply *after* the blending of planes. So the wording here would need
> clarification.


Yes, I was not sure about this, but it is effectively the general CRTC 
color correction which is applicable to the background color.

>
>>   Note that the color value provided here includes
>> + *	an alpha channel...non-opaque background color values are allowed,
>> + *	but are generally only honored in special cases (e.g., when a memory
>> + *	writeback connector is in use).
> This could be read as: if you use a non-opaque color value, it will
> usually be completely ignored (and the background will be e.g. black
> instead). Is that your intention?
>
> I think a more useful definition would be that the alpha is used in
> blending as always, but because we do not yet have physically
> transparent monitors, the final alpha value may not reach the video
> sink or the video sink may ignore it.

In our case, the hardware does not support alpha channel (as you can see 
the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).

For chip vendors who does support this feature, the video sink would get 
this transparency parameter. In the case where it is not, alpha channel 
would be ignored.


>> + *
>> + *	This property is setup with drm_crtc_add_bgcolor_property().
> You forgot to document the value format of this property. The ARGB color
> format needs to be defined at least to the same detail as all pixel
> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> definition already, simply saying the color is in that format would be
> enough.


Will do ! :)

I was thinking about the FourCC AR4H format. Have you something else in 
mind ?

>
> Another thing to document is whether this color value is alpha
> pre-multiplied or not. Planes can have the property "pixel blend mode",
> but because the background color is not on a plane, that property
> cannot apply here.
>
> The difference it makes is that if background color is both non-opaque
> and pre-multiplied, then the question arises what pixel values will
> actually be transmitted to video sink for the background. Will the
> alpha pre-multiplication be undone?
>
> Btw. note that "pixel blend mode" property does not document the use of
> background alpha at all. So if the background color can have non-opaque
> alpha, then you need to document the behavior in "pixel blend mode". It
> also does not document what alpha value will result from blending, for
> blending the next plane.

Those are questions that did not crossed my mind at all.

What would you suggest ? Instinctively I would say that in the case 
where there is a non-opaque background color,

alpha pre-multiplication would not be taken into account, although it is 
maybe not the best solution.

As I am not quite sure, I will lookup for this.


>
> The question about full vs. limited range seems unnecessary to me, as
> the background color will be used as-is in the blending stage, so
> userspace can just program the correct value that fits the pipeline it
> is setting up.
>
> One more question is, as HDR exists, could we need background colors
> with component values greater than 1.0?

AR4H color format should cover that case, isn't it ?



Regards,

Raphaël

>
> Scanout of FP16 formats exists.
>
>>    */
>
> Thanks,
> pq

Re: [PATCH 1/2] drm: add crtc background color property

[Raphael Gallais-Pou]

On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> On Wed, 7 Jul 2021 08:48:47 +0000
> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>
>> Some display controllers can be programmed to present non-black colors
>> for pixels not covered by any plane (or pixels covered by the
>> transparent regions of higher planes).  Compositors that want a UI with
>> a solid color background can potentially save memory bandwidth by
>> setting the CRTC background property and using smaller planes to display
>> the rest of the content.
>>
>> To avoid confusion between different ways of encoding RGB data, we
>> define a standard 64-bit format that should be used for this property's
>> value.  Helper functions and macros are provided to generate and dissect
>> values in this standard format with varying component precision values.
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>> ---
>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>   include/drm/drm_blend.h                   |  1 +
>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>   include/drm/drm_mode_config.h             |  5 ++++
>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>   				     struct drm_crtc *crtc)
>>   {
>>   	crtc_state->crtc = crtc;
>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>   }
>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>   
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>> index 438e9585b225..fea68f8f17f8 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>   	} else if (property == crtc->scaling_filter_property) {
>>   		state->scaling_filter = val;
>> +	} else if (property == config->bgcolor_property) {
>> +		state->bgcolor = val;
>>   	} else if (crtc->funcs->atomic_set_property) {
>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>   	} else {
>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>   		*val = 0;
>>   	else if (property == crtc->scaling_filter_property)
>>   		*val = state->scaling_filter;
>> +	else if (property == config->bgcolor_property)
>> +		*val = state->bgcolor;
>>   	else if (crtc->funcs->atomic_get_property)
>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>   	else
>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>> index ec37cbfabb50..6692d6a6db22 100644
>> --- a/drivers/gpu/drm/drm_blend.c
>> +++ b/drivers/gpu/drm/drm_blend.c
>> @@ -186,8 +186,7 @@
>>    *		 assumed to be 1.0
>>    *
>>    * Note that all the property extensions described here apply either to the
>> - * plane or the CRTC (e.g. for the background color, which currently is not
>> - * exposed and assumed to be black).
>> + * plane or the CRTC.
>>    *
>>    * SCALING_FILTER:
>>    *     Indicates scaling filter to be used for plane scaler
>> @@ -201,6 +200,21 @@
>>    *
>>    * Drivers can set up this property for a plane by calling
>>    * drm_plane_create_scaling_filter_property
>> + *
> Hi,


Hi Pekka,


Many thanks for your feedback, your comments are taken into account for 
a v2.


>
> I assume the below block is the UAPI documentation of this new property
> and that it would appear with the other UAPI docs.
>
>> + * BACKGROUND_COLOR:
>> + *	Defines the ARGB color of a full-screen layer that exists below all
>> + *	planes.  This color will be used for pixels not covered by any plane
>> + *	and may also be blended with plane contents as allowed by a plane's
>> + *	alpha values.  The background color defaults to black, and is assumed
>> + *	to be black for drivers that do not expose this property.
> All good up to here.
>
>>   Although
>> + *	background color isn't a plane, it is assumed that the color provided
>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>> + *	that planes undergo.
> This sounds to me like it refers to the per-plane degamma/csc/gamma
> which are new properties in development. I believe you do not mean
> that, but you mean the CRTC degamma/csc/gamma and everything else which
> apply *after* the blending of planes. So the wording here would need
> clarification.


Yes, I was not sure about this, but it is effectively the general CRTC 
color correction which is applicable to the background color.

>
>>   Note that the color value provided here includes
>> + *	an alpha channel...non-opaque background color values are allowed,
>> + *	but are generally only honored in special cases (e.g., when a memory
>> + *	writeback connector is in use).
> This could be read as: if you use a non-opaque color value, it will
> usually be completely ignored (and the background will be e.g. black
> instead). Is that your intention?
>
> I think a more useful definition would be that the alpha is used in
> blending as always, but because we do not yet have physically
> transparent monitors, the final alpha value may not reach the video
> sink or the video sink may ignore it.

In our case, the hardware does not support alpha channel (as you can see 
the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).

For chip vendors who does support this feature, the video sink would get 
this transparency parameter. In the case where it is not, alpha channel 
would be ignored.


>> + *
>> + *	This property is setup with drm_crtc_add_bgcolor_property().
> You forgot to document the value format of this property. The ARGB color
> format needs to be defined at least to the same detail as all pixel
> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> definition already, simply saying the color is in that format would be
> enough.


Will do ! :)

I was thinking about the FourCC AR4H format. Have you something else in 
mind ?

>
> Another thing to document is whether this color value is alpha
> pre-multiplied or not. Planes can have the property "pixel blend mode",
> but because the background color is not on a plane, that property
> cannot apply here.
>
> The difference it makes is that if background color is both non-opaque
> and pre-multiplied, then the question arises what pixel values will
> actually be transmitted to video sink for the background. Will the
> alpha pre-multiplication be undone?
>
> Btw. note that "pixel blend mode" property does not document the use of
> background alpha at all. So if the background color can have non-opaque
> alpha, then you need to document the behavior in "pixel blend mode". It
> also does not document what alpha value will result from blending, for
> blending the next plane.

Those are questions that did not crossed my mind at all.

What would you suggest ? Instinctively I would say that in the case 
where there is a non-opaque background color,

alpha pre-multiplication would not be taken into account, although it is 
maybe not the best solution.

As I am not quite sure, I will lookup for this.


>
> The question about full vs. limited range seems unnecessary to me, as
> the background color will be used as-is in the blending stage, so
> userspace can just program the correct value that fits the pipeline it
> is setting up.
>
> One more question is, as HDR exists, could we need background colors
> with component values greater than 1.0?

AR4H color format should cover that case, isn't it ?



Regards,

Raphaël

>
> Scanout of FP16 formats exists.
>
>>    */
>
> Thanks,
> pq

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1.1: Type: text/plain, Size: 10945 bytes --]

On Fri, 9 Jul 2021 18:23:26 +0200
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:

> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> > On Wed, 7 Jul 2021 08:48:47 +0000
> > Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >  
> >> Some display controllers can be programmed to present non-black colors
> >> for pixels not covered by any plane (or pixels covered by the
> >> transparent regions of higher planes).  Compositors that want a UI with
> >> a solid color background can potentially save memory bandwidth by
> >> setting the CRTC background property and using smaller planes to display
> >> the rest of the content.
> >>
> >> To avoid confusion between different ways of encoding RGB data, we
> >> define a standard 64-bit format that should be used for this property's
> >> value.  Helper functions and macros are provided to generate and dissect
> >> values in this standard format with varying component precision values.
> >>
> >> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >> ---
> >>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>   include/drm/drm_blend.h                   |  1 +
> >>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>   include/drm/drm_mode_config.h             |  5 ++++
> >>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>   8 files changed, 89 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> >> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> >> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
> >>   				     struct drm_crtc *crtc)
> >>   {
> >>   	crtc_state->crtc = crtc;
> >> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
> >>   }
> >>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
> >>   
> >> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> >> index 438e9585b225..fea68f8f17f8 100644
> >> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> >> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> >> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
> >>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
> >>   	} else if (property == crtc->scaling_filter_property) {
> >>   		state->scaling_filter = val;
> >> +	} else if (property == config->bgcolor_property) {
> >> +		state->bgcolor = val;
> >>   	} else if (crtc->funcs->atomic_set_property) {
> >>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
> >>   	} else {
> >> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
> >>   		*val = 0;
> >>   	else if (property == crtc->scaling_filter_property)
> >>   		*val = state->scaling_filter;
> >> +	else if (property == config->bgcolor_property)
> >> +		*val = state->bgcolor;
> >>   	else if (crtc->funcs->atomic_get_property)
> >>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
> >>   	else
> >> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> >> index ec37cbfabb50..6692d6a6db22 100644
> >> --- a/drivers/gpu/drm/drm_blend.c
> >> +++ b/drivers/gpu/drm/drm_blend.c
> >> @@ -186,8 +186,7 @@
> >>    *		 assumed to be 1.0
> >>    *
> >>    * Note that all the property extensions described here apply either to the
> >> - * plane or the CRTC (e.g. for the background color, which currently is not
> >> - * exposed and assumed to be black).
> >> + * plane or the CRTC.
> >>    *
> >>    * SCALING_FILTER:
> >>    *     Indicates scaling filter to be used for plane scaler
> >> @@ -201,6 +200,21 @@
> >>    *
> >>    * Drivers can set up this property for a plane by calling
> >>    * drm_plane_create_scaling_filter_property
> >> + *  
> > Hi,  
> 
> 
> Hi Pekka,
> 
> 
> Many thanks for your feedback, your comments are taken into account for 
> a v2.
> 
> 
> >
> > I assume the below block is the UAPI documentation of this new property
> > and that it would appear with the other UAPI docs.
> >  
> >> + * BACKGROUND_COLOR:
> >> + *	Defines the ARGB color of a full-screen layer that exists below all
> >> + *	planes.  This color will be used for pixels not covered by any plane
> >> + *	and may also be blended with plane contents as allowed by a plane's
> >> + *	alpha values.  The background color defaults to black, and is assumed
> >> + *	to be black for drivers that do not expose this property.  
> > All good up to here.
> >  
> >>   Although
> >> + *	background color isn't a plane, it is assumed that the color provided
> >> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> >> + *	that planes undergo.  
> > This sounds to me like it refers to the per-plane degamma/csc/gamma
> > which are new properties in development. I believe you do not mean
> > that, but you mean the CRTC degamma/csc/gamma and everything else which
> > apply *after* the blending of planes. So the wording here would need
> > clarification.  
> 
> 
> Yes, I was not sure about this, but it is effectively the general CRTC 
> color correction which is applicable to the background color.
> 
> >  
> >>   Note that the color value provided here includes
> >> + *	an alpha channel...non-opaque background color values are allowed,
> >> + *	but are generally only honored in special cases (e.g., when a memory
> >> + *	writeback connector is in use).  
> > This could be read as: if you use a non-opaque color value, it will
> > usually be completely ignored (and the background will be e.g. black
> > instead). Is that your intention?
> >
> > I think a more useful definition would be that the alpha is used in
> > blending as always, but because we do not yet have physically
> > transparent monitors, the final alpha value may not reach the video
> > sink or the video sink may ignore it.  
> 
> In our case, the hardware does not support alpha channel (as you can see 
> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
> 
> For chip vendors who does support this feature, the video sink would get 
> this transparency parameter. In the case where it is not, alpha channel 
> would be ignored.
> 
> 
> >> + *
> >> + *	This property is setup with drm_crtc_add_bgcolor_property().  
> > You forgot to document the value format of this property. The ARGB color
> > format needs to be defined at least to the same detail as all pixel
> > formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> > definition already, simply saying the color is in that format would be
> > enough.  
> 
> 
> Will do ! :)
> 
> I was thinking about the FourCC AR4H format. Have you something else in 
> mind ?

Hi,

if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
using right now. That is a floating-point format using 16-bit floats
(half float). It has only 10 bits precision IIRC.

As C compilers do not(?) have built-in support for halfs, using this
format would be inconvenient for userspace (and the kernel?). Since
it's just for one pixel value, I think using a format that is
convenient to craft would be good.


> > Another thing to document is whether this color value is alpha
> > pre-multiplied or not. Planes can have the property "pixel blend mode",
> > but because the background color is not on a plane, that property
> > cannot apply here.
> >
> > The difference it makes is that if background color is both non-opaque
> > and pre-multiplied, then the question arises what pixel values will
> > actually be transmitted to video sink for the background. Will the
> > alpha pre-multiplication be undone?
> >
> > Btw. note that "pixel blend mode" property does not document the use of
> > background alpha at all. So if the background color can have non-opaque
> > alpha, then you need to document the behavior in "pixel blend mode". It
> > also does not document what alpha value will result from blending, for
> > blending the next plane.  
> 
> Those are questions that did not crossed my mind at all.
> 
> What would you suggest ? Instinctively I would say that in the case 
> where there is a non-opaque background color,
> 
> alpha pre-multiplication would not be taken into account, although it is 
> maybe not the best solution.
> 
> As I am not quite sure, I will lookup for this.

Right now, I would suggest to just dodge the whole question: define the
background color to be opaque. Either drop the alpha channel, or
specify that alpha must be 1.0 for now (fail ioctl if not).

Let the people who actually need alpha in the background color figure
out all the details. They would know what they want, while we don't. We
also can't come up with a proper userspace for non-opaque alpha to
prove that the design works.

If you specify that alpha channel exists but must be 1.0, then someone
else could later add another property that defines how the alpha would
be used if it was less than 1.0. The existence of that other property
would then tell userspace that non-1.0 alpha is supported and also
define what it does. Userspace that does not understand that will just
keep using alpha 1.0, meaning it doesn't matter what value the other
new property has. So this seems quite future-proof to me.

> > The question about full vs. limited range seems unnecessary to me, as
> > the background color will be used as-is in the blending stage, so
> > userspace can just program the correct value that fits the pipeline it
> > is setting up.
> >
> > One more question is, as HDR exists, could we need background colors
> > with component values greater than 1.0?  
> 
> AR4H color format should cover that case, isn't it ?

Yes, but with the inconvenience I mentioned.

This is a genuine question though, would anyone actually need
background color values > 1.0. I don't know of any case yet where it
would be required. It would imply that plane blending happens in a
color space where >1.0 values are meaningful. I'm not even sure if any
hardware supporting that exists.

Maybe it would be best to assume that only [0.0, 1.0] pixel value range
is useful, and mention in the commit message that if someone really
needs values outside of that, they should create another background
color property. Then, you can pick a simple unsigned integer pixel
format, too. (I didn't see any 16 bit-per-channel formats like that in
drm_fourcc.h though.)


Thanks,
pq

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 10945 bytes --]

On Fri, 9 Jul 2021 18:23:26 +0200
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:

> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> > On Wed, 7 Jul 2021 08:48:47 +0000
> > Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >  
> >> Some display controllers can be programmed to present non-black colors
> >> for pixels not covered by any plane (or pixels covered by the
> >> transparent regions of higher planes).  Compositors that want a UI with
> >> a solid color background can potentially save memory bandwidth by
> >> setting the CRTC background property and using smaller planes to display
> >> the rest of the content.
> >>
> >> To avoid confusion between different ways of encoding RGB data, we
> >> define a standard 64-bit format that should be used for this property's
> >> value.  Helper functions and macros are provided to generate and dissect
> >> values in this standard format with varying component precision values.
> >>
> >> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >> ---
> >>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>   include/drm/drm_blend.h                   |  1 +
> >>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>   include/drm/drm_mode_config.h             |  5 ++++
> >>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>   8 files changed, 89 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> >> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> >> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
> >>   				     struct drm_crtc *crtc)
> >>   {
> >>   	crtc_state->crtc = crtc;
> >> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
> >>   }
> >>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
> >>   
> >> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> >> index 438e9585b225..fea68f8f17f8 100644
> >> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> >> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> >> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
> >>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
> >>   	} else if (property == crtc->scaling_filter_property) {
> >>   		state->scaling_filter = val;
> >> +	} else if (property == config->bgcolor_property) {
> >> +		state->bgcolor = val;
> >>   	} else if (crtc->funcs->atomic_set_property) {
> >>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
> >>   	} else {
> >> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
> >>   		*val = 0;
> >>   	else if (property == crtc->scaling_filter_property)
> >>   		*val = state->scaling_filter;
> >> +	else if (property == config->bgcolor_property)
> >> +		*val = state->bgcolor;
> >>   	else if (crtc->funcs->atomic_get_property)
> >>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
> >>   	else
> >> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> >> index ec37cbfabb50..6692d6a6db22 100644
> >> --- a/drivers/gpu/drm/drm_blend.c
> >> +++ b/drivers/gpu/drm/drm_blend.c
> >> @@ -186,8 +186,7 @@
> >>    *		 assumed to be 1.0
> >>    *
> >>    * Note that all the property extensions described here apply either to the
> >> - * plane or the CRTC (e.g. for the background color, which currently is not
> >> - * exposed and assumed to be black).
> >> + * plane or the CRTC.
> >>    *
> >>    * SCALING_FILTER:
> >>    *     Indicates scaling filter to be used for plane scaler
> >> @@ -201,6 +200,21 @@
> >>    *
> >>    * Drivers can set up this property for a plane by calling
> >>    * drm_plane_create_scaling_filter_property
> >> + *  
> > Hi,  
> 
> 
> Hi Pekka,
> 
> 
> Many thanks for your feedback, your comments are taken into account for 
> a v2.
> 
> 
> >
> > I assume the below block is the UAPI documentation of this new property
> > and that it would appear with the other UAPI docs.
> >  
> >> + * BACKGROUND_COLOR:
> >> + *	Defines the ARGB color of a full-screen layer that exists below all
> >> + *	planes.  This color will be used for pixels not covered by any plane
> >> + *	and may also be blended with plane contents as allowed by a plane's
> >> + *	alpha values.  The background color defaults to black, and is assumed
> >> + *	to be black for drivers that do not expose this property.  
> > All good up to here.
> >  
> >>   Although
> >> + *	background color isn't a plane, it is assumed that the color provided
> >> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> >> + *	that planes undergo.  
> > This sounds to me like it refers to the per-plane degamma/csc/gamma
> > which are new properties in development. I believe you do not mean
> > that, but you mean the CRTC degamma/csc/gamma and everything else which
> > apply *after* the blending of planes. So the wording here would need
> > clarification.  
> 
> 
> Yes, I was not sure about this, but it is effectively the general CRTC 
> color correction which is applicable to the background color.
> 
> >  
> >>   Note that the color value provided here includes
> >> + *	an alpha channel...non-opaque background color values are allowed,
> >> + *	but are generally only honored in special cases (e.g., when a memory
> >> + *	writeback connector is in use).  
> > This could be read as: if you use a non-opaque color value, it will
> > usually be completely ignored (and the background will be e.g. black
> > instead). Is that your intention?
> >
> > I think a more useful definition would be that the alpha is used in
> > blending as always, but because we do not yet have physically
> > transparent monitors, the final alpha value may not reach the video
> > sink or the video sink may ignore it.  
> 
> In our case, the hardware does not support alpha channel (as you can see 
> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
> 
> For chip vendors who does support this feature, the video sink would get 
> this transparency parameter. In the case where it is not, alpha channel 
> would be ignored.
> 
> 
> >> + *
> >> + *	This property is setup with drm_crtc_add_bgcolor_property().  
> > You forgot to document the value format of this property. The ARGB color
> > format needs to be defined at least to the same detail as all pixel
> > formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> > definition already, simply saying the color is in that format would be
> > enough.  
> 
> 
> Will do ! :)
> 
> I was thinking about the FourCC AR4H format. Have you something else in 
> mind ?

Hi,

if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
using right now. That is a floating-point format using 16-bit floats
(half float). It has only 10 bits precision IIRC.

As C compilers do not(?) have built-in support for halfs, using this
format would be inconvenient for userspace (and the kernel?). Since
it's just for one pixel value, I think using a format that is
convenient to craft would be good.


> > Another thing to document is whether this color value is alpha
> > pre-multiplied or not. Planes can have the property "pixel blend mode",
> > but because the background color is not on a plane, that property
> > cannot apply here.
> >
> > The difference it makes is that if background color is both non-opaque
> > and pre-multiplied, then the question arises what pixel values will
> > actually be transmitted to video sink for the background. Will the
> > alpha pre-multiplication be undone?
> >
> > Btw. note that "pixel blend mode" property does not document the use of
> > background alpha at all. So if the background color can have non-opaque
> > alpha, then you need to document the behavior in "pixel blend mode". It
> > also does not document what alpha value will result from blending, for
> > blending the next plane.  
> 
> Those are questions that did not crossed my mind at all.
> 
> What would you suggest ? Instinctively I would say that in the case 
> where there is a non-opaque background color,
> 
> alpha pre-multiplication would not be taken into account, although it is 
> maybe not the best solution.
> 
> As I am not quite sure, I will lookup for this.

Right now, I would suggest to just dodge the whole question: define the
background color to be opaque. Either drop the alpha channel, or
specify that alpha must be 1.0 for now (fail ioctl if not).

Let the people who actually need alpha in the background color figure
out all the details. They would know what they want, while we don't. We
also can't come up with a proper userspace for non-opaque alpha to
prove that the design works.

If you specify that alpha channel exists but must be 1.0, then someone
else could later add another property that defines how the alpha would
be used if it was less than 1.0. The existence of that other property
would then tell userspace that non-1.0 alpha is supported and also
define what it does. Userspace that does not understand that will just
keep using alpha 1.0, meaning it doesn't matter what value the other
new property has. So this seems quite future-proof to me.

> > The question about full vs. limited range seems unnecessary to me, as
> > the background color will be used as-is in the blending stage, so
> > userspace can just program the correct value that fits the pipeline it
> > is setting up.
> >
> > One more question is, as HDR exists, could we need background colors
> > with component values greater than 1.0?  
> 
> AR4H color format should cover that case, isn't it ?

Yes, but with the inconvenience I mentioned.

This is a genuine question though, would anyone actually need
background color values > 1.0. I don't know of any case yet where it
would be required. It would imply that plane blending happens in a
color space where >1.0 values are meaningful. I'm not even sure if any
hardware supporting that exists.

Maybe it would be best to assume that only [0.0, 1.0] pixel value range
is useful, and mention in the commit message that if someone really
needs values outside of that, they should create another background
color property. Then, you can pick a simple unsigned integer pixel
format, too. (I didn't see any 16 bit-per-channel formats like that in
drm_fourcc.h though.)


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 10945 bytes --]

On Fri, 9 Jul 2021 18:23:26 +0200
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:

> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> > On Wed, 7 Jul 2021 08:48:47 +0000
> > Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >  
> >> Some display controllers can be programmed to present non-black colors
> >> for pixels not covered by any plane (or pixels covered by the
> >> transparent regions of higher planes).  Compositors that want a UI with
> >> a solid color background can potentially save memory bandwidth by
> >> setting the CRTC background property and using smaller planes to display
> >> the rest of the content.
> >>
> >> To avoid confusion between different ways of encoding RGB data, we
> >> define a standard 64-bit format that should be used for this property's
> >> value.  Helper functions and macros are provided to generate and dissect
> >> values in this standard format with varying component precision values.
> >>
> >> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >> ---
> >>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>   include/drm/drm_blend.h                   |  1 +
> >>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>   include/drm/drm_mode_config.h             |  5 ++++
> >>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>   8 files changed, 89 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
> >> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> >> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> >> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
> >>   				     struct drm_crtc *crtc)
> >>   {
> >>   	crtc_state->crtc = crtc;
> >> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
> >>   }
> >>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
> >>   
> >> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> >> index 438e9585b225..fea68f8f17f8 100644
> >> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> >> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> >> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
> >>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
> >>   	} else if (property == crtc->scaling_filter_property) {
> >>   		state->scaling_filter = val;
> >> +	} else if (property == config->bgcolor_property) {
> >> +		state->bgcolor = val;
> >>   	} else if (crtc->funcs->atomic_set_property) {
> >>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
> >>   	} else {
> >> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
> >>   		*val = 0;
> >>   	else if (property == crtc->scaling_filter_property)
> >>   		*val = state->scaling_filter;
> >> +	else if (property == config->bgcolor_property)
> >> +		*val = state->bgcolor;
> >>   	else if (crtc->funcs->atomic_get_property)
> >>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
> >>   	else
> >> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> >> index ec37cbfabb50..6692d6a6db22 100644
> >> --- a/drivers/gpu/drm/drm_blend.c
> >> +++ b/drivers/gpu/drm/drm_blend.c
> >> @@ -186,8 +186,7 @@
> >>    *		 assumed to be 1.0
> >>    *
> >>    * Note that all the property extensions described here apply either to the
> >> - * plane or the CRTC (e.g. for the background color, which currently is not
> >> - * exposed and assumed to be black).
> >> + * plane or the CRTC.
> >>    *
> >>    * SCALING_FILTER:
> >>    *     Indicates scaling filter to be used for plane scaler
> >> @@ -201,6 +200,21 @@
> >>    *
> >>    * Drivers can set up this property for a plane by calling
> >>    * drm_plane_create_scaling_filter_property
> >> + *  
> > Hi,  
> 
> 
> Hi Pekka,
> 
> 
> Many thanks for your feedback, your comments are taken into account for 
> a v2.
> 
> 
> >
> > I assume the below block is the UAPI documentation of this new property
> > and that it would appear with the other UAPI docs.
> >  
> >> + * BACKGROUND_COLOR:
> >> + *	Defines the ARGB color of a full-screen layer that exists below all
> >> + *	planes.  This color will be used for pixels not covered by any plane
> >> + *	and may also be blended with plane contents as allowed by a plane's
> >> + *	alpha values.  The background color defaults to black, and is assumed
> >> + *	to be black for drivers that do not expose this property.  
> > All good up to here.
> >  
> >>   Although
> >> + *	background color isn't a plane, it is assumed that the color provided
> >> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
> >> + *	that planes undergo.  
> > This sounds to me like it refers to the per-plane degamma/csc/gamma
> > which are new properties in development. I believe you do not mean
> > that, but you mean the CRTC degamma/csc/gamma and everything else which
> > apply *after* the blending of planes. So the wording here would need
> > clarification.  
> 
> 
> Yes, I was not sure about this, but it is effectively the general CRTC 
> color correction which is applicable to the background color.
> 
> >  
> >>   Note that the color value provided here includes
> >> + *	an alpha channel...non-opaque background color values are allowed,
> >> + *	but are generally only honored in special cases (e.g., when a memory
> >> + *	writeback connector is in use).  
> > This could be read as: if you use a non-opaque color value, it will
> > usually be completely ignored (and the background will be e.g. black
> > instead). Is that your intention?
> >
> > I think a more useful definition would be that the alpha is used in
> > blending as always, but because we do not yet have physically
> > transparent monitors, the final alpha value may not reach the video
> > sink or the video sink may ignore it.  
> 
> In our case, the hardware does not support alpha channel (as you can see 
> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
> 
> For chip vendors who does support this feature, the video sink would get 
> this transparency parameter. In the case where it is not, alpha channel 
> would be ignored.
> 
> 
> >> + *
> >> + *	This property is setup with drm_crtc_add_bgcolor_property().  
> > You forgot to document the value format of this property. The ARGB color
> > format needs to be defined at least to the same detail as all pixel
> > formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
> > definition already, simply saying the color is in that format would be
> > enough.  
> 
> 
> Will do ! :)
> 
> I was thinking about the FourCC AR4H format. Have you something else in 
> mind ?

Hi,

if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
using right now. That is a floating-point format using 16-bit floats
(half float). It has only 10 bits precision IIRC.

As C compilers do not(?) have built-in support for halfs, using this
format would be inconvenient for userspace (and the kernel?). Since
it's just for one pixel value, I think using a format that is
convenient to craft would be good.


> > Another thing to document is whether this color value is alpha
> > pre-multiplied or not. Planes can have the property "pixel blend mode",
> > but because the background color is not on a plane, that property
> > cannot apply here.
> >
> > The difference it makes is that if background color is both non-opaque
> > and pre-multiplied, then the question arises what pixel values will
> > actually be transmitted to video sink for the background. Will the
> > alpha pre-multiplication be undone?
> >
> > Btw. note that "pixel blend mode" property does not document the use of
> > background alpha at all. So if the background color can have non-opaque
> > alpha, then you need to document the behavior in "pixel blend mode". It
> > also does not document what alpha value will result from blending, for
> > blending the next plane.  
> 
> Those are questions that did not crossed my mind at all.
> 
> What would you suggest ? Instinctively I would say that in the case 
> where there is a non-opaque background color,
> 
> alpha pre-multiplication would not be taken into account, although it is 
> maybe not the best solution.
> 
> As I am not quite sure, I will lookup for this.

Right now, I would suggest to just dodge the whole question: define the
background color to be opaque. Either drop the alpha channel, or
specify that alpha must be 1.0 for now (fail ioctl if not).

Let the people who actually need alpha in the background color figure
out all the details. They would know what they want, while we don't. We
also can't come up with a proper userspace for non-opaque alpha to
prove that the design works.

If you specify that alpha channel exists but must be 1.0, then someone
else could later add another property that defines how the alpha would
be used if it was less than 1.0. The existence of that other property
would then tell userspace that non-1.0 alpha is supported and also
define what it does. Userspace that does not understand that will just
keep using alpha 1.0, meaning it doesn't matter what value the other
new property has. So this seems quite future-proof to me.

> > The question about full vs. limited range seems unnecessary to me, as
> > the background color will be used as-is in the blending stage, so
> > userspace can just program the correct value that fits the pipeline it
> > is setting up.
> >
> > One more question is, as HDR exists, could we need background colors
> > with component values greater than 1.0?  
> 
> AR4H color format should cover that case, isn't it ?

Yes, but with the inconvenience I mentioned.

This is a genuine question though, would anyone actually need
background color values > 1.0. I don't know of any case yet where it
would be required. It would imply that plane blending happens in a
color space where >1.0 values are meaningful. I'm not even sure if any
hardware supporting that exists.

Maybe it would be best to assume that only [0.0, 1.0] pixel value range
is useful, and mention in the commit message that if someone really
needs values outside of that, they should create another background
color property. Then, you can pick a simple unsigned integer pixel
format, too. (I didn't see any 16 bit-per-channel formats like that in
drm_fourcc.h though.)


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> On Fri, 9 Jul 2021 18:23:26 +0200
> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> 
>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>  
>>>> Some display controllers can be programmed to present non-black colors
>>>> for pixels not covered by any plane (or pixels covered by the
>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>> a solid color background can potentially save memory bandwidth by
>>>> setting the CRTC background property and using smaller planes to display
>>>> the rest of the content.
>>>>
>>>> To avoid confusion between different ways of encoding RGB data, we
>>>> define a standard 64-bit format that should be used for this property's
>>>> value.  Helper functions and macros are provided to generate and dissect
>>>> values in this standard format with varying component precision values.
>>>>
>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>> ---
>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>   include/drm/drm_blend.h                   |  1 +
>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>>>   				     struct drm_crtc *crtc)
>>>>   {
>>>>   	crtc_state->crtc = crtc;
>>>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>>>   }
>>>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>>>   
>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> index 438e9585b225..fea68f8f17f8 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>>>   	} else if (property == crtc->scaling_filter_property) {
>>>>   		state->scaling_filter = val;
>>>> +	} else if (property == config->bgcolor_property) {
>>>> +		state->bgcolor = val;
>>>>   	} else if (crtc->funcs->atomic_set_property) {
>>>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>>>   	} else {
>>>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>>>   		*val = 0;
>>>>   	else if (property == crtc->scaling_filter_property)
>>>>   		*val = state->scaling_filter;
>>>> +	else if (property == config->bgcolor_property)
>>>> +		*val = state->bgcolor;
>>>>   	else if (crtc->funcs->atomic_get_property)
>>>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>>>   	else
>>>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>>>> index ec37cbfabb50..6692d6a6db22 100644
>>>> --- a/drivers/gpu/drm/drm_blend.c
>>>> +++ b/drivers/gpu/drm/drm_blend.c
>>>> @@ -186,8 +186,7 @@
>>>>    *		 assumed to be 1.0
>>>>    *
>>>>    * Note that all the property extensions described here apply either to the
>>>> - * plane or the CRTC (e.g. for the background color, which currently is not
>>>> - * exposed and assumed to be black).
>>>> + * plane or the CRTC.
>>>>    *
>>>>    * SCALING_FILTER:
>>>>    *     Indicates scaling filter to be used for plane scaler
>>>> @@ -201,6 +200,21 @@
>>>>    *
>>>>    * Drivers can set up this property for a plane by calling
>>>>    * drm_plane_create_scaling_filter_property
>>>> + *  
>>> Hi,  
>>
>>
>> Hi Pekka,
>>
>>
>> Many thanks for your feedback, your comments are taken into account for 
>> a v2.
>>
>>
>>>
>>> I assume the below block is the UAPI documentation of this new property
>>> and that it would appear with the other UAPI docs.
>>>  
>>>> + * BACKGROUND_COLOR:
>>>> + *	Defines the ARGB color of a full-screen layer that exists below all
>>>> + *	planes.  This color will be used for pixels not covered by any plane
>>>> + *	and may also be blended with plane contents as allowed by a plane's
>>>> + *	alpha values.  The background color defaults to black, and is assumed
>>>> + *	to be black for drivers that do not expose this property.  
>>> All good up to here.
>>>  
>>>>   Although
>>>> + *	background color isn't a plane, it is assumed that the color provided
>>>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>>>> + *	that planes undergo.  
>>> This sounds to me like it refers to the per-plane degamma/csc/gamma
>>> which are new properties in development. I believe you do not mean
>>> that, but you mean the CRTC degamma/csc/gamma and everything else which
>>> apply *after* the blending of planes. So the wording here would need
>>> clarification.  
>>
>>
>> Yes, I was not sure about this, but it is effectively the general CRTC 
>> color correction which is applicable to the background color.
>>
>>>  
>>>>   Note that the color value provided here includes
>>>> + *	an alpha channel...non-opaque background color values are allowed,
>>>> + *	but are generally only honored in special cases (e.g., when a memory
>>>> + *	writeback connector is in use).  
>>> This could be read as: if you use a non-opaque color value, it will
>>> usually be completely ignored (and the background will be e.g. black
>>> instead). Is that your intention?
>>>
>>> I think a more useful definition would be that the alpha is used in
>>> blending as always, but because we do not yet have physically
>>> transparent monitors, the final alpha value may not reach the video
>>> sink or the video sink may ignore it.  
>>
>> In our case, the hardware does not support alpha channel (as you can see 
>> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
>>
>> For chip vendors who does support this feature, the video sink would get 
>> this transparency parameter. In the case where it is not, alpha channel 
>> would be ignored.
>>
>>
>>>> + *
>>>> + *	This property is setup with drm_crtc_add_bgcolor_property().  
>>> You forgot to document the value format of this property. The ARGB color
>>> format needs to be defined at least to the same detail as all pixel
>>> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
>>> definition already, simply saying the color is in that format would be
>>> enough.  
>>
>>
>> Will do ! :)
>>
>> I was thinking about the FourCC AR4H format. Have you something else in 
>> mind ?
> 
> Hi,
> 
> if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
> using right now. That is a floating-point format using 16-bit floats
> (half float). It has only 10 bits precision IIRC.
> 
> As C compilers do not(?) have built-in support for halfs, using this
> format would be inconvenient for userspace (and the kernel?). Since
> it's just for one pixel value, I think using a format that is
> convenient to craft would be good.
> 
> 
>>> Another thing to document is whether this color value is alpha
>>> pre-multiplied or not. Planes can have the property "pixel blend mode",
>>> but because the background color is not on a plane, that property
>>> cannot apply here.
>>>
>>> The difference it makes is that if background color is both non-opaque
>>> and pre-multiplied, then the question arises what pixel values will
>>> actually be transmitted to video sink for the background. Will the
>>> alpha pre-multiplication be undone?
>>>
>>> Btw. note that "pixel blend mode" property does not document the use of
>>> background alpha at all. So if the background color can have non-opaque
>>> alpha, then you need to document the behavior in "pixel blend mode". It
>>> also does not document what alpha value will result from blending, for
>>> blending the next plane.  
>>
>> Those are questions that did not crossed my mind at all.
>>
>> What would you suggest ? Instinctively I would say that in the case 
>> where there is a non-opaque background color,
>>
>> alpha pre-multiplication would not be taken into account, although it is 
>> maybe not the best solution.
>>
>> As I am not quite sure, I will lookup for this.
> 
> Right now, I would suggest to just dodge the whole question: define the
> background color to be opaque. Either drop the alpha channel, or
> specify that alpha must be 1.0 for now (fail ioctl if not).
> 
> Let the people who actually need alpha in the background color figure
> out all the details. They would know what they want, while we don't. We
> also can't come up with a proper userspace for non-opaque alpha to
> prove that the design works.
> 
> If you specify that alpha channel exists but must be 1.0, then someone
> else could later add another property that defines how the alpha would
> be used if it was less than 1.0. The existence of that other property
> would then tell userspace that non-1.0 alpha is supported and also
> define what it does. Userspace that does not understand that will just
> keep using alpha 1.0, meaning it doesn't matter what value the other
> new property has. So this seems quite future-proof to me.
> 
>>> The question about full vs. limited range seems unnecessary to me, as
>>> the background color will be used as-is in the blending stage, so
>>> userspace can just program the correct value that fits the pipeline it
>>> is setting up.
>>>
>>> One more question is, as HDR exists, could we need background colors
>>> with component values greater than 1.0?  
>>
>> AR4H color format should cover that case, isn't it ?
> 
> Yes, but with the inconvenience I mentioned.
> 
> This is a genuine question though, would anyone actually need
> background color values > 1.0. I don't know of any case yet where it
> would be required. It would imply that plane blending happens in a
> color space where >1.0 values are meaningful. I'm not even sure if any
> hardware supporting that exists.
> 
> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> is useful, and mention in the commit message that if someone really
> needs values outside of that, they should create another background
> color property. Then, you can pick a simple unsigned integer pixel
> format, too. (I didn't see any 16 bit-per-channel formats like that in
> drm_fourcc.h though.)
> 

I don't think we should artificially limit this to [0.0, 1.0]. As you
mentioned above when talking about full vs limited, the userspace
understands what's the correct value that fits the pipeline. If that
pipeline is FP16 with > 1.0 values then it would make sense that the
background color can be > 1.0.

Harry

> 
> Thanks,
> pq
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> On Fri, 9 Jul 2021 18:23:26 +0200
> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> 
>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>  
>>>> Some display controllers can be programmed to present non-black colors
>>>> for pixels not covered by any plane (or pixels covered by the
>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>> a solid color background can potentially save memory bandwidth by
>>>> setting the CRTC background property and using smaller planes to display
>>>> the rest of the content.
>>>>
>>>> To avoid confusion between different ways of encoding RGB data, we
>>>> define a standard 64-bit format that should be used for this property's
>>>> value.  Helper functions and macros are provided to generate and dissect
>>>> values in this standard format with varying component precision values.
>>>>
>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>> ---
>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>   include/drm/drm_blend.h                   |  1 +
>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>>>   				     struct drm_crtc *crtc)
>>>>   {
>>>>   	crtc_state->crtc = crtc;
>>>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>>>   }
>>>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>>>   
>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> index 438e9585b225..fea68f8f17f8 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>>>   	} else if (property == crtc->scaling_filter_property) {
>>>>   		state->scaling_filter = val;
>>>> +	} else if (property == config->bgcolor_property) {
>>>> +		state->bgcolor = val;
>>>>   	} else if (crtc->funcs->atomic_set_property) {
>>>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>>>   	} else {
>>>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>>>   		*val = 0;
>>>>   	else if (property == crtc->scaling_filter_property)
>>>>   		*val = state->scaling_filter;
>>>> +	else if (property == config->bgcolor_property)
>>>> +		*val = state->bgcolor;
>>>>   	else if (crtc->funcs->atomic_get_property)
>>>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>>>   	else
>>>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>>>> index ec37cbfabb50..6692d6a6db22 100644
>>>> --- a/drivers/gpu/drm/drm_blend.c
>>>> +++ b/drivers/gpu/drm/drm_blend.c
>>>> @@ -186,8 +186,7 @@
>>>>    *		 assumed to be 1.0
>>>>    *
>>>>    * Note that all the property extensions described here apply either to the
>>>> - * plane or the CRTC (e.g. for the background color, which currently is not
>>>> - * exposed and assumed to be black).
>>>> + * plane or the CRTC.
>>>>    *
>>>>    * SCALING_FILTER:
>>>>    *     Indicates scaling filter to be used for plane scaler
>>>> @@ -201,6 +200,21 @@
>>>>    *
>>>>    * Drivers can set up this property for a plane by calling
>>>>    * drm_plane_create_scaling_filter_property
>>>> + *  
>>> Hi,  
>>
>>
>> Hi Pekka,
>>
>>
>> Many thanks for your feedback, your comments are taken into account for 
>> a v2.
>>
>>
>>>
>>> I assume the below block is the UAPI documentation of this new property
>>> and that it would appear with the other UAPI docs.
>>>  
>>>> + * BACKGROUND_COLOR:
>>>> + *	Defines the ARGB color of a full-screen layer that exists below all
>>>> + *	planes.  This color will be used for pixels not covered by any plane
>>>> + *	and may also be blended with plane contents as allowed by a plane's
>>>> + *	alpha values.  The background color defaults to black, and is assumed
>>>> + *	to be black for drivers that do not expose this property.  
>>> All good up to here.
>>>  
>>>>   Although
>>>> + *	background color isn't a plane, it is assumed that the color provided
>>>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>>>> + *	that planes undergo.  
>>> This sounds to me like it refers to the per-plane degamma/csc/gamma
>>> which are new properties in development. I believe you do not mean
>>> that, but you mean the CRTC degamma/csc/gamma and everything else which
>>> apply *after* the blending of planes. So the wording here would need
>>> clarification.  
>>
>>
>> Yes, I was not sure about this, but it is effectively the general CRTC 
>> color correction which is applicable to the background color.
>>
>>>  
>>>>   Note that the color value provided here includes
>>>> + *	an alpha channel...non-opaque background color values are allowed,
>>>> + *	but are generally only honored in special cases (e.g., when a memory
>>>> + *	writeback connector is in use).  
>>> This could be read as: if you use a non-opaque color value, it will
>>> usually be completely ignored (and the background will be e.g. black
>>> instead). Is that your intention?
>>>
>>> I think a more useful definition would be that the alpha is used in
>>> blending as always, but because we do not yet have physically
>>> transparent monitors, the final alpha value may not reach the video
>>> sink or the video sink may ignore it.  
>>
>> In our case, the hardware does not support alpha channel (as you can see 
>> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
>>
>> For chip vendors who does support this feature, the video sink would get 
>> this transparency parameter. In the case where it is not, alpha channel 
>> would be ignored.
>>
>>
>>>> + *
>>>> + *	This property is setup with drm_crtc_add_bgcolor_property().  
>>> You forgot to document the value format of this property. The ARGB color
>>> format needs to be defined at least to the same detail as all pixel
>>> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
>>> definition already, simply saying the color is in that format would be
>>> enough.  
>>
>>
>> Will do ! :)
>>
>> I was thinking about the FourCC AR4H format. Have you something else in 
>> mind ?
> 
> Hi,
> 
> if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
> using right now. That is a floating-point format using 16-bit floats
> (half float). It has only 10 bits precision IIRC.
> 
> As C compilers do not(?) have built-in support for halfs, using this
> format would be inconvenient for userspace (and the kernel?). Since
> it's just for one pixel value, I think using a format that is
> convenient to craft would be good.
> 
> 
>>> Another thing to document is whether this color value is alpha
>>> pre-multiplied or not. Planes can have the property "pixel blend mode",
>>> but because the background color is not on a plane, that property
>>> cannot apply here.
>>>
>>> The difference it makes is that if background color is both non-opaque
>>> and pre-multiplied, then the question arises what pixel values will
>>> actually be transmitted to video sink for the background. Will the
>>> alpha pre-multiplication be undone?
>>>
>>> Btw. note that "pixel blend mode" property does not document the use of
>>> background alpha at all. So if the background color can have non-opaque
>>> alpha, then you need to document the behavior in "pixel blend mode". It
>>> also does not document what alpha value will result from blending, for
>>> blending the next plane.  
>>
>> Those are questions that did not crossed my mind at all.
>>
>> What would you suggest ? Instinctively I would say that in the case 
>> where there is a non-opaque background color,
>>
>> alpha pre-multiplication would not be taken into account, although it is 
>> maybe not the best solution.
>>
>> As I am not quite sure, I will lookup for this.
> 
> Right now, I would suggest to just dodge the whole question: define the
> background color to be opaque. Either drop the alpha channel, or
> specify that alpha must be 1.0 for now (fail ioctl if not).
> 
> Let the people who actually need alpha in the background color figure
> out all the details. They would know what they want, while we don't. We
> also can't come up with a proper userspace for non-opaque alpha to
> prove that the design works.
> 
> If you specify that alpha channel exists but must be 1.0, then someone
> else could later add another property that defines how the alpha would
> be used if it was less than 1.0. The existence of that other property
> would then tell userspace that non-1.0 alpha is supported and also
> define what it does. Userspace that does not understand that will just
> keep using alpha 1.0, meaning it doesn't matter what value the other
> new property has. So this seems quite future-proof to me.
> 
>>> The question about full vs. limited range seems unnecessary to me, as
>>> the background color will be used as-is in the blending stage, so
>>> userspace can just program the correct value that fits the pipeline it
>>> is setting up.
>>>
>>> One more question is, as HDR exists, could we need background colors
>>> with component values greater than 1.0?  
>>
>> AR4H color format should cover that case, isn't it ?
> 
> Yes, but with the inconvenience I mentioned.
> 
> This is a genuine question though, would anyone actually need
> background color values > 1.0. I don't know of any case yet where it
> would be required. It would imply that plane blending happens in a
> color space where >1.0 values are meaningful. I'm not even sure if any
> hardware supporting that exists.
> 
> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> is useful, and mention in the commit message that if someone really
> needs values outside of that, they should create another background
> color property. Then, you can pick a simple unsigned integer pixel
> format, too. (I didn't see any 16 bit-per-channel formats like that in
> drm_fourcc.h though.)
> 

I don't think we should artificially limit this to [0.0, 1.0]. As you
mentioned above when talking about full vs limited, the userspace
understands what's the correct value that fits the pipeline. If that
pipeline is FP16 with > 1.0 values then it would make sense that the
background color can be > 1.0.

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> On Fri, 9 Jul 2021 18:23:26 +0200
> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> 
>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>  
>>>> Some display controllers can be programmed to present non-black colors
>>>> for pixels not covered by any plane (or pixels covered by the
>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>> a solid color background can potentially save memory bandwidth by
>>>> setting the CRTC background property and using smaller planes to display
>>>> the rest of the content.
>>>>
>>>> To avoid confusion between different ways of encoding RGB data, we
>>>> define a standard 64-bit format that should be used for this property's
>>>> value.  Helper functions and macros are provided to generate and dissect
>>>> values in this standard format with varying component precision values.
>>>>
>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>> ---
>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>   include/drm/drm_blend.h                   |  1 +
>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> index ddcf5c2c8e6a..1b95a4ecdb2b 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
>>>> @@ -72,6 +72,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>>>>   				     struct drm_crtc *crtc)
>>>>   {
>>>>   	crtc_state->crtc = crtc;
>>>> +	crtc_state->bgcolor = drm_argb(16, 0xffff, 0, 0, 0);
>>>>   }
>>>>   EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>>>>   
>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> index 438e9585b225..fea68f8f17f8 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> @@ -483,6 +483,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>>>>   		set_out_fence_for_crtc(state->state, crtc, fence_ptr);
>>>>   	} else if (property == crtc->scaling_filter_property) {
>>>>   		state->scaling_filter = val;
>>>> +	} else if (property == config->bgcolor_property) {
>>>> +		state->bgcolor = val;
>>>>   	} else if (crtc->funcs->atomic_set_property) {
>>>>   		return crtc->funcs->atomic_set_property(crtc, state, property, val);
>>>>   	} else {
>>>> @@ -520,6 +522,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>>>   		*val = 0;
>>>>   	else if (property == crtc->scaling_filter_property)
>>>>   		*val = state->scaling_filter;
>>>> +	else if (property == config->bgcolor_property)
>>>> +		*val = state->bgcolor;
>>>>   	else if (crtc->funcs->atomic_get_property)
>>>>   		return crtc->funcs->atomic_get_property(crtc, state, property, val);
>>>>   	else
>>>> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
>>>> index ec37cbfabb50..6692d6a6db22 100644
>>>> --- a/drivers/gpu/drm/drm_blend.c
>>>> +++ b/drivers/gpu/drm/drm_blend.c
>>>> @@ -186,8 +186,7 @@
>>>>    *		 assumed to be 1.0
>>>>    *
>>>>    * Note that all the property extensions described here apply either to the
>>>> - * plane or the CRTC (e.g. for the background color, which currently is not
>>>> - * exposed and assumed to be black).
>>>> + * plane or the CRTC.
>>>>    *
>>>>    * SCALING_FILTER:
>>>>    *     Indicates scaling filter to be used for plane scaler
>>>> @@ -201,6 +200,21 @@
>>>>    *
>>>>    * Drivers can set up this property for a plane by calling
>>>>    * drm_plane_create_scaling_filter_property
>>>> + *  
>>> Hi,  
>>
>>
>> Hi Pekka,
>>
>>
>> Many thanks for your feedback, your comments are taken into account for 
>> a v2.
>>
>>
>>>
>>> I assume the below block is the UAPI documentation of this new property
>>> and that it would appear with the other UAPI docs.
>>>  
>>>> + * BACKGROUND_COLOR:
>>>> + *	Defines the ARGB color of a full-screen layer that exists below all
>>>> + *	planes.  This color will be used for pixels not covered by any plane
>>>> + *	and may also be blended with plane contents as allowed by a plane's
>>>> + *	alpha values.  The background color defaults to black, and is assumed
>>>> + *	to be black for drivers that do not expose this property.  
>>> All good up to here.
>>>  
>>>>   Although
>>>> + *	background color isn't a plane, it is assumed that the color provided
>>>> + *	here undergoes the same pipe-level degamma/CSC/gamma transformations
>>>> + *	that planes undergo.  
>>> This sounds to me like it refers to the per-plane degamma/csc/gamma
>>> which are new properties in development. I believe you do not mean
>>> that, but you mean the CRTC degamma/csc/gamma and everything else which
>>> apply *after* the blending of planes. So the wording here would need
>>> clarification.  
>>
>>
>> Yes, I was not sure about this, but it is effectively the general CRTC 
>> color correction which is applicable to the background color.
>>
>>>  
>>>>   Note that the color value provided here includes
>>>> + *	an alpha channel...non-opaque background color values are allowed,
>>>> + *	but are generally only honored in special cases (e.g., when a memory
>>>> + *	writeback connector is in use).  
>>> This could be read as: if you use a non-opaque color value, it will
>>> usually be completely ignored (and the background will be e.g. black
>>> instead). Is that your intention?
>>>
>>> I think a more useful definition would be that the alpha is used in
>>> blending as always, but because we do not yet have physically
>>> transparent monitors, the final alpha value may not reach the video
>>> sink or the video sink may ignore it.  
>>
>> In our case, the hardware does not support alpha channel (as you can see 
>> the DRM_ARGB_TO_LTDC_RGB24 macro in the second patch).
>>
>> For chip vendors who does support this feature, the video sink would get 
>> this transparency parameter. In the case where it is not, alpha channel 
>> would be ignored.
>>
>>
>>>> + *
>>>> + *	This property is setup with drm_crtc_add_bgcolor_property().  
>>> You forgot to document the value format of this property. The ARGB color
>>> format needs to be defined at least to the same detail as all pixel
>>> formats in drm_fourcc.h are. If there is a suitable DRM_FORMAT_*
>>> definition already, simply saying the color is in that format would be
>>> enough.  
>>
>>
>> Will do ! :)
>>
>> I was thinking about the FourCC AR4H format. Have you something else in 
>> mind ?
> 
> Hi,
> 
> if you mean DRM_FORMAT_ARGB16161616F then that is not what you are
> using right now. That is a floating-point format using 16-bit floats
> (half float). It has only 10 bits precision IIRC.
> 
> As C compilers do not(?) have built-in support for halfs, using this
> format would be inconvenient for userspace (and the kernel?). Since
> it's just for one pixel value, I think using a format that is
> convenient to craft would be good.
> 
> 
>>> Another thing to document is whether this color value is alpha
>>> pre-multiplied or not. Planes can have the property "pixel blend mode",
>>> but because the background color is not on a plane, that property
>>> cannot apply here.
>>>
>>> The difference it makes is that if background color is both non-opaque
>>> and pre-multiplied, then the question arises what pixel values will
>>> actually be transmitted to video sink for the background. Will the
>>> alpha pre-multiplication be undone?
>>>
>>> Btw. note that "pixel blend mode" property does not document the use of
>>> background alpha at all. So if the background color can have non-opaque
>>> alpha, then you need to document the behavior in "pixel blend mode". It
>>> also does not document what alpha value will result from blending, for
>>> blending the next plane.  
>>
>> Those are questions that did not crossed my mind at all.
>>
>> What would you suggest ? Instinctively I would say that in the case 
>> where there is a non-opaque background color,
>>
>> alpha pre-multiplication would not be taken into account, although it is 
>> maybe not the best solution.
>>
>> As I am not quite sure, I will lookup for this.
> 
> Right now, I would suggest to just dodge the whole question: define the
> background color to be opaque. Either drop the alpha channel, or
> specify that alpha must be 1.0 for now (fail ioctl if not).
> 
> Let the people who actually need alpha in the background color figure
> out all the details. They would know what they want, while we don't. We
> also can't come up with a proper userspace for non-opaque alpha to
> prove that the design works.
> 
> If you specify that alpha channel exists but must be 1.0, then someone
> else could later add another property that defines how the alpha would
> be used if it was less than 1.0. The existence of that other property
> would then tell userspace that non-1.0 alpha is supported and also
> define what it does. Userspace that does not understand that will just
> keep using alpha 1.0, meaning it doesn't matter what value the other
> new property has. So this seems quite future-proof to me.
> 
>>> The question about full vs. limited range seems unnecessary to me, as
>>> the background color will be used as-is in the blending stage, so
>>> userspace can just program the correct value that fits the pipeline it
>>> is setting up.
>>>
>>> One more question is, as HDR exists, could we need background colors
>>> with component values greater than 1.0?  
>>
>> AR4H color format should cover that case, isn't it ?
> 
> Yes, but with the inconvenience I mentioned.
> 
> This is a genuine question though, would anyone actually need
> background color values > 1.0. I don't know of any case yet where it
> would be required. It would imply that plane blending happens in a
> color space where >1.0 values are meaningful. I'm not even sure if any
> hardware supporting that exists.
> 
> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> is useful, and mention in the commit message that if someone really
> needs values outside of that, they should create another background
> color property. Then, you can pick a simple unsigned integer pixel
> format, too. (I didn't see any 16 bit-per-channel formats like that in
> drm_fourcc.h though.)
> 

I don't think we should artificially limit this to [0.0, 1.0]. As you
mentioned above when talking about full vs limited, the userspace
understands what's the correct value that fits the pipeline. If that
pipeline is FP16 with > 1.0 values then it would make sense that the
background color can be > 1.0.

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1.1: Type: text/plain, Size: 4158 bytes --]

On Mon, 12 Jul 2021 12:15:59 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> > On Fri, 9 Jul 2021 18:23:26 +0200
> > Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >   
> >> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
> >>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>    
> >>>> Some display controllers can be programmed to present non-black colors
> >>>> for pixels not covered by any plane (or pixels covered by the
> >>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>> a solid color background can potentially save memory bandwidth by
> >>>> setting the CRTC background property and using smaller planes to display
> >>>> the rest of the content.
> >>>>
> >>>> To avoid confusion between different ways of encoding RGB data, we
> >>>> define a standard 64-bit format that should be used for this property's
> >>>> value.  Helper functions and macros are provided to generate and dissect
> >>>> values in this standard format with varying component precision values.
> >>>>
> >>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>> ---
> >>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>   include/drm/drm_blend.h                   |  1 +
> >>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>   8 files changed, 89 insertions(+), 2 deletions(-)

...

> >>> The question about full vs. limited range seems unnecessary to me, as
> >>> the background color will be used as-is in the blending stage, so
> >>> userspace can just program the correct value that fits the pipeline it
> >>> is setting up.
> >>>
> >>> One more question is, as HDR exists, could we need background colors
> >>> with component values greater than 1.0?    
> >>
> >> AR4H color format should cover that case, isn't it ?  
> > 
> > Yes, but with the inconvenience I mentioned.
> > 
> > This is a genuine question though, would anyone actually need
> > background color values > 1.0. I don't know of any case yet where it
> > would be required. It would imply that plane blending happens in a
> > color space where >1.0 values are meaningful. I'm not even sure if any
> > hardware supporting that exists.
> > 
> > Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> > is useful, and mention in the commit message that if someone really
> > needs values outside of that, they should create another background
> > color property. Then, you can pick a simple unsigned integer pixel
> > format, too. (I didn't see any 16 bit-per-channel formats like that in
> > drm_fourcc.h though.)
> >   
> 
> I don't think we should artificially limit this to [0.0, 1.0]. As you
> mentioned above when talking about full vs limited, the userspace
> understands what's the correct value that fits the pipeline. If that
> pipeline is FP16 with > 1.0 values then it would make sense that the
> background color can be > 1.0.

Ok. The standard FP32 format then for ease of use and guaranteed enough
range and precision for far into the future?

Or do you want to keep it in 64 bits total, so the UABI can pack
everything into a u64 instead of needing to create a blob?

I don't mind as long as it's clearly documented what it is and how it
works, and it carries enough precision.

But FP16 with its 10 bits of precision might be too little for integer
12-16 bpc pipelines and sinks?

If the values can go beyond [0.0, 1.0] range, then does the blending
hardware and the degamma/ctm/gamma coming afterwards cope with them, or
do they get clamped anyway?


Thanks,
pq

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 4158 bytes --]

On Mon, 12 Jul 2021 12:15:59 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> > On Fri, 9 Jul 2021 18:23:26 +0200
> > Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >   
> >> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
> >>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>    
> >>>> Some display controllers can be programmed to present non-black colors
> >>>> for pixels not covered by any plane (or pixels covered by the
> >>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>> a solid color background can potentially save memory bandwidth by
> >>>> setting the CRTC background property and using smaller planes to display
> >>>> the rest of the content.
> >>>>
> >>>> To avoid confusion between different ways of encoding RGB data, we
> >>>> define a standard 64-bit format that should be used for this property's
> >>>> value.  Helper functions and macros are provided to generate and dissect
> >>>> values in this standard format with varying component precision values.
> >>>>
> >>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>> ---
> >>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>   include/drm/drm_blend.h                   |  1 +
> >>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>   8 files changed, 89 insertions(+), 2 deletions(-)

...

> >>> The question about full vs. limited range seems unnecessary to me, as
> >>> the background color will be used as-is in the blending stage, so
> >>> userspace can just program the correct value that fits the pipeline it
> >>> is setting up.
> >>>
> >>> One more question is, as HDR exists, could we need background colors
> >>> with component values greater than 1.0?    
> >>
> >> AR4H color format should cover that case, isn't it ?  
> > 
> > Yes, but with the inconvenience I mentioned.
> > 
> > This is a genuine question though, would anyone actually need
> > background color values > 1.0. I don't know of any case yet where it
> > would be required. It would imply that plane blending happens in a
> > color space where >1.0 values are meaningful. I'm not even sure if any
> > hardware supporting that exists.
> > 
> > Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> > is useful, and mention in the commit message that if someone really
> > needs values outside of that, they should create another background
> > color property. Then, you can pick a simple unsigned integer pixel
> > format, too. (I didn't see any 16 bit-per-channel formats like that in
> > drm_fourcc.h though.)
> >   
> 
> I don't think we should artificially limit this to [0.0, 1.0]. As you
> mentioned above when talking about full vs limited, the userspace
> understands what's the correct value that fits the pipeline. If that
> pipeline is FP16 with > 1.0 values then it would make sense that the
> background color can be > 1.0.

Ok. The standard FP32 format then for ease of use and guaranteed enough
range and precision for far into the future?

Or do you want to keep it in 64 bits total, so the UABI can pack
everything into a u64 instead of needing to create a blob?

I don't mind as long as it's clearly documented what it is and how it
works, and it carries enough precision.

But FP16 with its 10 bits of precision might be too little for integer
12-16 bpc pipelines and sinks?

If the values can go beyond [0.0, 1.0] range, then does the blending
hardware and the degamma/ctm/gamma coming afterwards cope with them, or
do they get clamped anyway?


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 4158 bytes --]

On Mon, 12 Jul 2021 12:15:59 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> > On Fri, 9 Jul 2021 18:23:26 +0200
> > Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >   
> >> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
> >>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>    
> >>>> Some display controllers can be programmed to present non-black colors
> >>>> for pixels not covered by any plane (or pixels covered by the
> >>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>> a solid color background can potentially save memory bandwidth by
> >>>> setting the CRTC background property and using smaller planes to display
> >>>> the rest of the content.
> >>>>
> >>>> To avoid confusion between different ways of encoding RGB data, we
> >>>> define a standard 64-bit format that should be used for this property's
> >>>> value.  Helper functions and macros are provided to generate and dissect
> >>>> values in this standard format with varying component precision values.
> >>>>
> >>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>> ---
> >>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>   include/drm/drm_blend.h                   |  1 +
> >>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>   8 files changed, 89 insertions(+), 2 deletions(-)

...

> >>> The question about full vs. limited range seems unnecessary to me, as
> >>> the background color will be used as-is in the blending stage, so
> >>> userspace can just program the correct value that fits the pipeline it
> >>> is setting up.
> >>>
> >>> One more question is, as HDR exists, could we need background colors
> >>> with component values greater than 1.0?    
> >>
> >> AR4H color format should cover that case, isn't it ?  
> > 
> > Yes, but with the inconvenience I mentioned.
> > 
> > This is a genuine question though, would anyone actually need
> > background color values > 1.0. I don't know of any case yet where it
> > would be required. It would imply that plane blending happens in a
> > color space where >1.0 values are meaningful. I'm not even sure if any
> > hardware supporting that exists.
> > 
> > Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> > is useful, and mention in the commit message that if someone really
> > needs values outside of that, they should create another background
> > color property. Then, you can pick a simple unsigned integer pixel
> > format, too. (I didn't see any 16 bit-per-channel formats like that in
> > drm_fourcc.h though.)
> >   
> 
> I don't think we should artificially limit this to [0.0, 1.0]. As you
> mentioned above when talking about full vs limited, the userspace
> understands what's the correct value that fits the pipeline. If that
> pipeline is FP16 with > 1.0 values then it would make sense that the
> background color can be > 1.0.

Ok. The standard FP32 format then for ease of use and guaranteed enough
range and precision for far into the future?

Or do you want to keep it in 64 bits total, so the UABI can pack
everything into a u64 instead of needing to create a blob?

I don't mind as long as it's clearly documented what it is and how it
works, and it carries enough precision.

But FP16 with its 10 bits of precision might be too little for integer
12-16 bpc pipelines and sinks?

If the values can go beyond [0.0, 1.0] range, then does the blending
hardware and the degamma/ctm/gamma coming afterwards cope with them, or
do they get clamped anyway?


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> On Mon, 12 Jul 2021 12:15:59 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>   
>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>    
>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>> the rest of the content.
>>>>>>
>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>> values in this standard format with varying component precision values.
>>>>>>
>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>> ---
>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
> 
> ...
> 
>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>> the background color will be used as-is in the blending stage, so
>>>>> userspace can just program the correct value that fits the pipeline it
>>>>> is setting up.
>>>>>
>>>>> One more question is, as HDR exists, could we need background colors
>>>>> with component values greater than 1.0?    
>>>>
>>>> AR4H color format should cover that case, isn't it ?  
>>>
>>> Yes, but with the inconvenience I mentioned.
>>>
>>> This is a genuine question though, would anyone actually need
>>> background color values > 1.0. I don't know of any case yet where it
>>> would be required. It would imply that plane blending happens in a
>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>> hardware supporting that exists.
>>>
>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>> is useful, and mention in the commit message that if someone really
>>> needs values outside of that, they should create another background
>>> color property. Then, you can pick a simple unsigned integer pixel
>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>> drm_fourcc.h though.)
>>>   
>>
>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>> mentioned above when talking about full vs limited, the userspace
>> understands what's the correct value that fits the pipeline. If that
>> pipeline is FP16 with > 1.0 values then it would make sense that the
>> background color can be > 1.0.
> 
> Ok. The standard FP32 format then for ease of use and guaranteed enough
> range and precision for far into the future?
> 

I don't have a strong preference for FP16 vs FP32. My understanding is
that FP16 is enough to represent linearly encoded data in a way that
looks smooth to humans.

scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].

> Or do you want to keep it in 64 bits total, so the UABI can pack
> everything into a u64 instead of needing to create a blob?
> 
> I don't mind as long as it's clearly documented what it is and how it
> works, and it carries enough precision.
> 
> But FP16 with its 10 bits of precision might be too little for integer
> 12-16 bpc pipelines and sinks?
> 
> If the values can go beyond [0.0, 1.0] range, then does the blending
> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> do they get clamped anyway?
> 

That probably depends on the HW and how it's configured. AMD HW can handle
values above and below [0.0, 1.0].

Harry

> 
> Thanks,
> pq
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> On Mon, 12 Jul 2021 12:15:59 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>   
>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>    
>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>> the rest of the content.
>>>>>>
>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>> values in this standard format with varying component precision values.
>>>>>>
>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>> ---
>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
> 
> ...
> 
>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>> the background color will be used as-is in the blending stage, so
>>>>> userspace can just program the correct value that fits the pipeline it
>>>>> is setting up.
>>>>>
>>>>> One more question is, as HDR exists, could we need background colors
>>>>> with component values greater than 1.0?    
>>>>
>>>> AR4H color format should cover that case, isn't it ?  
>>>
>>> Yes, but with the inconvenience I mentioned.
>>>
>>> This is a genuine question though, would anyone actually need
>>> background color values > 1.0. I don't know of any case yet where it
>>> would be required. It would imply that plane blending happens in a
>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>> hardware supporting that exists.
>>>
>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>> is useful, and mention in the commit message that if someone really
>>> needs values outside of that, they should create another background
>>> color property. Then, you can pick a simple unsigned integer pixel
>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>> drm_fourcc.h though.)
>>>   
>>
>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>> mentioned above when talking about full vs limited, the userspace
>> understands what's the correct value that fits the pipeline. If that
>> pipeline is FP16 with > 1.0 values then it would make sense that the
>> background color can be > 1.0.
> 
> Ok. The standard FP32 format then for ease of use and guaranteed enough
> range and precision for far into the future?
> 

I don't have a strong preference for FP16 vs FP32. My understanding is
that FP16 is enough to represent linearly encoded data in a way that
looks smooth to humans.

scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].

> Or do you want to keep it in 64 bits total, so the UABI can pack
> everything into a u64 instead of needing to create a blob?
> 
> I don't mind as long as it's clearly documented what it is and how it
> works, and it carries enough precision.
> 
> But FP16 with its 10 bits of precision might be too little for integer
> 12-16 bpc pipelines and sinks?
> 
> If the values can go beyond [0.0, 1.0] range, then does the blending
> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> do they get clamped anyway?
> 

That probably depends on the HW and how it's configured. AMD HW can handle
values above and below [0.0, 1.0].

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> On Mon, 12 Jul 2021 12:15:59 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>   
>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:  
>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>    
>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>> the rest of the content.
>>>>>>
>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>> values in this standard format with varying component precision values.
>>>>>>
>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>> ---
>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)
> 
> ...
> 
>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>> the background color will be used as-is in the blending stage, so
>>>>> userspace can just program the correct value that fits the pipeline it
>>>>> is setting up.
>>>>>
>>>>> One more question is, as HDR exists, could we need background colors
>>>>> with component values greater than 1.0?    
>>>>
>>>> AR4H color format should cover that case, isn't it ?  
>>>
>>> Yes, but with the inconvenience I mentioned.
>>>
>>> This is a genuine question though, would anyone actually need
>>> background color values > 1.0. I don't know of any case yet where it
>>> would be required. It would imply that plane blending happens in a
>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>> hardware supporting that exists.
>>>
>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>> is useful, and mention in the commit message that if someone really
>>> needs values outside of that, they should create another background
>>> color property. Then, you can pick a simple unsigned integer pixel
>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>> drm_fourcc.h though.)
>>>   
>>
>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>> mentioned above when talking about full vs limited, the userspace
>> understands what's the correct value that fits the pipeline. If that
>> pipeline is FP16 with > 1.0 values then it would make sense that the
>> background color can be > 1.0.
> 
> Ok. The standard FP32 format then for ease of use and guaranteed enough
> range and precision for far into the future?
> 

I don't have a strong preference for FP16 vs FP32. My understanding is
that FP16 is enough to represent linearly encoded data in a way that
looks smooth to humans.

scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].

> Or do you want to keep it in 64 bits total, so the UABI can pack
> everything into a u64 instead of needing to create a blob?
> 
> I don't mind as long as it's clearly documented what it is and how it
> works, and it carries enough precision.
> 
> But FP16 with its 10 bits of precision might be too little for integer
> 12-16 bpc pipelines and sinks?
> 
> If the values can go beyond [0.0, 1.0] range, then does the blending
> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> do they get clamped anyway?
> 

That probably depends on the HW and how it's configured. AMD HW can handle
values above and below [0.0, 1.0].

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1.1: Type: text/plain, Size: 5526 bytes --]

On Tue, 13 Jul 2021 09:54:35 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> > On Mon, 12 Jul 2021 12:15:59 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
> >>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>     
> >>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
> >>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>      
> >>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>> the rest of the content.
> >>>>>>
> >>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>> values in this standard format with varying component precision values.
> >>>>>>
> >>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>> ---
> >>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
> > 
> > ...
> >   
> >>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>> the background color will be used as-is in the blending stage, so
> >>>>> userspace can just program the correct value that fits the pipeline it
> >>>>> is setting up.
> >>>>>
> >>>>> One more question is, as HDR exists, could we need background colors
> >>>>> with component values greater than 1.0?      
> >>>>
> >>>> AR4H color format should cover that case, isn't it ?    
> >>>
> >>> Yes, but with the inconvenience I mentioned.
> >>>
> >>> This is a genuine question though, would anyone actually need
> >>> background color values > 1.0. I don't know of any case yet where it
> >>> would be required. It would imply that plane blending happens in a
> >>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>> hardware supporting that exists.
> >>>
> >>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>> is useful, and mention in the commit message that if someone really
> >>> needs values outside of that, they should create another background
> >>> color property. Then, you can pick a simple unsigned integer pixel
> >>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>> drm_fourcc.h though.)
> >>>     
> >>
> >> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >> mentioned above when talking about full vs limited, the userspace
> >> understands what's the correct value that fits the pipeline. If that
> >> pipeline is FP16 with > 1.0 values then it would make sense that the
> >> background color can be > 1.0.  
> > 
> > Ok. The standard FP32 format then for ease of use and guaranteed enough
> > range and precision for far into the future?
> >   
> 
> I don't have a strong preference for FP16 vs FP32. My understanding is
> that FP16 is enough to represent linearly encoded data in a way that
> looks smooth to humans.
> 
> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> 
> > Or do you want to keep it in 64 bits total, so the UABI can pack
> > everything into a u64 instead of needing to create a blob?
> > 
> > I don't mind as long as it's clearly documented what it is and how it
> > works, and it carries enough precision.
> > 
> > But FP16 with its 10 bits of precision might be too little for integer
> > 12-16 bpc pipelines and sinks?

The 10 bits worries me still.

If you have a pipeline that works in [0.0, 1.0] range only, then FP16
limits precision to 10 bits (in the upper half of the range?).

> > 
> > If the values can go beyond [0.0, 1.0] range, then does the blending
> > hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> > do they get clamped anyway?
> >   
> 
> That probably depends on the HW and how it's configured. AMD HW can handle
> values above and below [0.0, 1.0].

Right, so how would userspace know what will happen?

Or do we need to specify that while values outside that unit range are
expressable, it is hardware-specific on how they will behave, so
generic userspace should not attempt to use values outside of the unit
range?

I guess this caveat should be documented for everything, not just for
background color? LUT inputs and outputs, CTM input and output ranges,
FB formats...


Thanks,
pq

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 5526 bytes --]

On Tue, 13 Jul 2021 09:54:35 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> > On Mon, 12 Jul 2021 12:15:59 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
> >>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>     
> >>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
> >>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>      
> >>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>> the rest of the content.
> >>>>>>
> >>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>> values in this standard format with varying component precision values.
> >>>>>>
> >>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>> ---
> >>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
> > 
> > ...
> >   
> >>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>> the background color will be used as-is in the blending stage, so
> >>>>> userspace can just program the correct value that fits the pipeline it
> >>>>> is setting up.
> >>>>>
> >>>>> One more question is, as HDR exists, could we need background colors
> >>>>> with component values greater than 1.0?      
> >>>>
> >>>> AR4H color format should cover that case, isn't it ?    
> >>>
> >>> Yes, but with the inconvenience I mentioned.
> >>>
> >>> This is a genuine question though, would anyone actually need
> >>> background color values > 1.0. I don't know of any case yet where it
> >>> would be required. It would imply that plane blending happens in a
> >>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>> hardware supporting that exists.
> >>>
> >>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>> is useful, and mention in the commit message that if someone really
> >>> needs values outside of that, they should create another background
> >>> color property. Then, you can pick a simple unsigned integer pixel
> >>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>> drm_fourcc.h though.)
> >>>     
> >>
> >> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >> mentioned above when talking about full vs limited, the userspace
> >> understands what's the correct value that fits the pipeline. If that
> >> pipeline is FP16 with > 1.0 values then it would make sense that the
> >> background color can be > 1.0.  
> > 
> > Ok. The standard FP32 format then for ease of use and guaranteed enough
> > range and precision for far into the future?
> >   
> 
> I don't have a strong preference for FP16 vs FP32. My understanding is
> that FP16 is enough to represent linearly encoded data in a way that
> looks smooth to humans.
> 
> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> 
> > Or do you want to keep it in 64 bits total, so the UABI can pack
> > everything into a u64 instead of needing to create a blob?
> > 
> > I don't mind as long as it's clearly documented what it is and how it
> > works, and it carries enough precision.
> > 
> > But FP16 with its 10 bits of precision might be too little for integer
> > 12-16 bpc pipelines and sinks?

The 10 bits worries me still.

If you have a pipeline that works in [0.0, 1.0] range only, then FP16
limits precision to 10 bits (in the upper half of the range?).

> > 
> > If the values can go beyond [0.0, 1.0] range, then does the blending
> > hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> > do they get clamped anyway?
> >   
> 
> That probably depends on the HW and how it's configured. AMD HW can handle
> values above and below [0.0, 1.0].

Right, so how would userspace know what will happen?

Or do we need to specify that while values outside that unit range are
expressable, it is hardware-specific on how they will behave, so
generic userspace should not attempt to use values outside of the unit
range?

I guess this caveat should be documented for everything, not just for
background color? LUT inputs and outputs, CTM input and output ranges,
FB formats...


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 5526 bytes --]

On Tue, 13 Jul 2021 09:54:35 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> > On Mon, 12 Jul 2021 12:15:59 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
> >>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>     
> >>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
> >>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>      
> >>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>> the rest of the content.
> >>>>>>
> >>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>> values in this standard format with varying component precision values.
> >>>>>>
> >>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>> ---
> >>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
> > 
> > ...
> >   
> >>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>> the background color will be used as-is in the blending stage, so
> >>>>> userspace can just program the correct value that fits the pipeline it
> >>>>> is setting up.
> >>>>>
> >>>>> One more question is, as HDR exists, could we need background colors
> >>>>> with component values greater than 1.0?      
> >>>>
> >>>> AR4H color format should cover that case, isn't it ?    
> >>>
> >>> Yes, but with the inconvenience I mentioned.
> >>>
> >>> This is a genuine question though, would anyone actually need
> >>> background color values > 1.0. I don't know of any case yet where it
> >>> would be required. It would imply that plane blending happens in a
> >>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>> hardware supporting that exists.
> >>>
> >>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>> is useful, and mention in the commit message that if someone really
> >>> needs values outside of that, they should create another background
> >>> color property. Then, you can pick a simple unsigned integer pixel
> >>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>> drm_fourcc.h though.)
> >>>     
> >>
> >> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >> mentioned above when talking about full vs limited, the userspace
> >> understands what's the correct value that fits the pipeline. If that
> >> pipeline is FP16 with > 1.0 values then it would make sense that the
> >> background color can be > 1.0.  
> > 
> > Ok. The standard FP32 format then for ease of use and guaranteed enough
> > range and precision for far into the future?
> >   
> 
> I don't have a strong preference for FP16 vs FP32. My understanding is
> that FP16 is enough to represent linearly encoded data in a way that
> looks smooth to humans.
> 
> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> 
> > Or do you want to keep it in 64 bits total, so the UABI can pack
> > everything into a u64 instead of needing to create a blob?
> > 
> > I don't mind as long as it's clearly documented what it is and how it
> > works, and it carries enough precision.
> > 
> > But FP16 with its 10 bits of precision might be too little for integer
> > 12-16 bpc pipelines and sinks?

The 10 bits worries me still.

If you have a pipeline that works in [0.0, 1.0] range only, then FP16
limits precision to 10 bits (in the upper half of the range?).

> > 
> > If the values can go beyond [0.0, 1.0] range, then does the blending
> > hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> > do they get clamped anyway?
> >   
> 
> That probably depends on the HW and how it's configured. AMD HW can handle
> values above and below [0.0, 1.0].

Right, so how would userspace know what will happen?

Or do we need to specify that while values outside that unit range are
expressable, it is hardware-specific on how they will behave, so
generic userspace should not attempt to use values outside of the unit
range?

I guess this caveat should be documented for everything, not just for
background color? LUT inputs and outputs, CTM input and output ranges,
FB formats...


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> On Tue, 13 Jul 2021 09:54:35 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>     
>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>      
>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>> the rest of the content.
>>>>>>>>
>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>
>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>> ---
>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
>>>
>>> ...
>>>   
>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>> is setting up.
>>>>>>>
>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>> with component values greater than 1.0?      
>>>>>>
>>>>>> AR4H color format should cover that case, isn't it ?    
>>>>>
>>>>> Yes, but with the inconvenience I mentioned.
>>>>>
>>>>> This is a genuine question though, would anyone actually need
>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>> would be required. It would imply that plane blending happens in a
>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>> hardware supporting that exists.
>>>>>
>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>> is useful, and mention in the commit message that if someone really
>>>>> needs values outside of that, they should create another background
>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>> drm_fourcc.h though.)
>>>>>     
>>>>
>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>> mentioned above when talking about full vs limited, the userspace
>>>> understands what's the correct value that fits the pipeline. If that
>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>> background color can be > 1.0.  
>>>
>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>> range and precision for far into the future?
>>>   
>>
>> I don't have a strong preference for FP16 vs FP32. My understanding is
>> that FP16 is enough to represent linearly encoded data in a way that
>> looks smooth to humans.
>>
>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>
>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>> everything into a u64 instead of needing to create a blob?
>>>
>>> I don't mind as long as it's clearly documented what it is and how it
>>> works, and it carries enough precision.
>>>
>>> But FP16 with its 10 bits of precision might be too little for integer
>>> 12-16 bpc pipelines and sinks?
> 
> The 10 bits worries me still.
> 
> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> limits precision to 10 bits (in the upper half of the range?).
> 
>>>
>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>> do they get clamped anyway?
>>>   
>>
>> That probably depends on the HW and how it's configured. AMD HW can handle
>> values above and below [0.0, 1.0].
> 
> Right, so how would userspace know what will happen?
> 
> Or do we need to specify that while values outside that unit range are
> expressable, it is hardware-specific on how they will behave, so
> generic userspace should not attempt to use values outside of the unit
> range?
> 
> I guess this caveat should be documented for everything, not just for
> background color? LUT inputs and outputs, CTM input and output ranges,
> FB formats...
> 

I'm not sure we should artificially limit the interface at this point, or
document hypotheticals. At this point I don't even know whether going beyond
[0.0, 1.0] would be a challenge for any HW that supports floating point
formats.

Harry

> 
> Thanks,
> pq
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> On Tue, 13 Jul 2021 09:54:35 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>     
>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>      
>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>> the rest of the content.
>>>>>>>>
>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>
>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>> ---
>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
>>>
>>> ...
>>>   
>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>> is setting up.
>>>>>>>
>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>> with component values greater than 1.0?      
>>>>>>
>>>>>> AR4H color format should cover that case, isn't it ?    
>>>>>
>>>>> Yes, but with the inconvenience I mentioned.
>>>>>
>>>>> This is a genuine question though, would anyone actually need
>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>> would be required. It would imply that plane blending happens in a
>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>> hardware supporting that exists.
>>>>>
>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>> is useful, and mention in the commit message that if someone really
>>>>> needs values outside of that, they should create another background
>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>> drm_fourcc.h though.)
>>>>>     
>>>>
>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>> mentioned above when talking about full vs limited, the userspace
>>>> understands what's the correct value that fits the pipeline. If that
>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>> background color can be > 1.0.  
>>>
>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>> range and precision for far into the future?
>>>   
>>
>> I don't have a strong preference for FP16 vs FP32. My understanding is
>> that FP16 is enough to represent linearly encoded data in a way that
>> looks smooth to humans.
>>
>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>
>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>> everything into a u64 instead of needing to create a blob?
>>>
>>> I don't mind as long as it's clearly documented what it is and how it
>>> works, and it carries enough precision.
>>>
>>> But FP16 with its 10 bits of precision might be too little for integer
>>> 12-16 bpc pipelines and sinks?
> 
> The 10 bits worries me still.
> 
> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> limits precision to 10 bits (in the upper half of the range?).
> 
>>>
>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>> do they get clamped anyway?
>>>   
>>
>> That probably depends on the HW and how it's configured. AMD HW can handle
>> values above and below [0.0, 1.0].
> 
> Right, so how would userspace know what will happen?
> 
> Or do we need to specify that while values outside that unit range are
> expressable, it is hardware-specific on how they will behave, so
> generic userspace should not attempt to use values outside of the unit
> range?
> 
> I guess this caveat should be documented for everything, not just for
> background color? LUT inputs and outputs, CTM input and output ranges,
> FB formats...
> 

I'm not sure we should artificially limit the interface at this point, or
document hypotheticals. At this point I don't even know whether going beyond
[0.0, 1.0] would be a challenge for any HW that supports floating point
formats.

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> On Tue, 13 Jul 2021 09:54:35 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:  
>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>     
>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:    
>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>      
>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>> the rest of the content.
>>>>>>>>
>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>
>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>> ---
>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)  
>>>
>>> ...
>>>   
>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>> is setting up.
>>>>>>>
>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>> with component values greater than 1.0?      
>>>>>>
>>>>>> AR4H color format should cover that case, isn't it ?    
>>>>>
>>>>> Yes, but with the inconvenience I mentioned.
>>>>>
>>>>> This is a genuine question though, would anyone actually need
>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>> would be required. It would imply that plane blending happens in a
>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>> hardware supporting that exists.
>>>>>
>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>> is useful, and mention in the commit message that if someone really
>>>>> needs values outside of that, they should create another background
>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>> drm_fourcc.h though.)
>>>>>     
>>>>
>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>> mentioned above when talking about full vs limited, the userspace
>>>> understands what's the correct value that fits the pipeline. If that
>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>> background color can be > 1.0.  
>>>
>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>> range and precision for far into the future?
>>>   
>>
>> I don't have a strong preference for FP16 vs FP32. My understanding is
>> that FP16 is enough to represent linearly encoded data in a way that
>> looks smooth to humans.
>>
>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>
>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>> everything into a u64 instead of needing to create a blob?
>>>
>>> I don't mind as long as it's clearly documented what it is and how it
>>> works, and it carries enough precision.
>>>
>>> But FP16 with its 10 bits of precision might be too little for integer
>>> 12-16 bpc pipelines and sinks?
> 
> The 10 bits worries me still.
> 
> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> limits precision to 10 bits (in the upper half of the range?).
> 
>>>
>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>> do they get clamped anyway?
>>>   
>>
>> That probably depends on the HW and how it's configured. AMD HW can handle
>> values above and below [0.0, 1.0].
> 
> Right, so how would userspace know what will happen?
> 
> Or do we need to specify that while values outside that unit range are
> expressable, it is hardware-specific on how they will behave, so
> generic userspace should not attempt to use values outside of the unit
> range?
> 
> I guess this caveat should be documented for everything, not just for
> background color? LUT inputs and outputs, CTM input and output ranges,
> FB formats...
> 

I'm not sure we should artificially limit the interface at this point, or
document hypotheticals. At this point I don't even know whether going beyond
[0.0, 1.0] would be a challenge for any HW that supports floating point
formats.

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1.1: Type: text/plain, Size: 8023 bytes --]

On Wed, 14 Jul 2021 12:13:58 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> > On Tue, 13 Jul 2021 09:54:35 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
> >>> On Mon, 12 Jul 2021 12:15:59 -0400
> >>> Harry Wentland <harry.wentland@amd.com> wrote:
> >>>     
> >>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
> >>>>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>       
> >>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
> >>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>>>        
> >>>>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>>>> the rest of the content.
> >>>>>>>>
> >>>>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>>>> values in this standard format with varying component precision values.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>>>> ---
> >>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
> >>>
> >>> ...
> >>>     
> >>>>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>>>> the background color will be used as-is in the blending stage, so
> >>>>>>> userspace can just program the correct value that fits the pipeline it
> >>>>>>> is setting up.
> >>>>>>>
> >>>>>>> One more question is, as HDR exists, could we need background colors
> >>>>>>> with component values greater than 1.0?        
> >>>>>>
> >>>>>> AR4H color format should cover that case, isn't it ?      
> >>>>>
> >>>>> Yes, but with the inconvenience I mentioned.
> >>>>>
> >>>>> This is a genuine question though, would anyone actually need
> >>>>> background color values > 1.0. I don't know of any case yet where it
> >>>>> would be required. It would imply that plane blending happens in a
> >>>>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>>>> hardware supporting that exists.
> >>>>>
> >>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>>>> is useful, and mention in the commit message that if someone really
> >>>>> needs values outside of that, they should create another background
> >>>>> color property. Then, you can pick a simple unsigned integer pixel
> >>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>>>> drm_fourcc.h though.)
> >>>>>       
> >>>>
> >>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >>>> mentioned above when talking about full vs limited, the userspace
> >>>> understands what's the correct value that fits the pipeline. If that
> >>>> pipeline is FP16 with > 1.0 values then it would make sense that the
> >>>> background color can be > 1.0.    
> >>>
> >>> Ok. The standard FP32 format then for ease of use and guaranteed enough
> >>> range and precision for far into the future?
> >>>     
> >>
> >> I don't have a strong preference for FP16 vs FP32. My understanding is
> >> that FP16 is enough to represent linearly encoded data in a way that
> >> looks smooth to humans.
> >>
> >> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> >>  
> >>> Or do you want to keep it in 64 bits total, so the UABI can pack
> >>> everything into a u64 instead of needing to create a blob?
> >>>
> >>> I don't mind as long as it's clearly documented what it is and how it
> >>> works, and it carries enough precision.
> >>>
> >>> But FP16 with its 10 bits of precision might be too little for integer
> >>> 12-16 bpc pipelines and sinks?  
> > 
> > The 10 bits worries me still.
> > 
> > If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> > limits precision to 10 bits (in the upper half of the range?).
> >   
> >>>
> >>> If the values can go beyond [0.0, 1.0] range, then does the blending
> >>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> >>> do they get clamped anyway?
> >>>     
> >>
> >> That probably depends on the HW and how it's configured. AMD HW can handle
> >> values above and below [0.0, 1.0].  
> > 
> > Right, so how would userspace know what will happen?
> > 
> > Or do we need to specify that while values outside that unit range are
> > expressable, it is hardware-specific on how they will behave, so
> > generic userspace should not attempt to use values outside of the unit
> > range?
> > 
> > I guess this caveat should be documented for everything, not just for
> > background color? LUT inputs and outputs, CTM input and output ranges,
> > FB formats...
> >   
> 
> I'm not sure we should artificially limit the interface at this point, or
> document hypotheticals. At this point I don't even know whether going beyond
> [0.0, 1.0] would be a challenge for any HW that supports floating point
> formats.

Exactly, we don't know. Yet we have to document how background color
works. If background color can express values outside of [0.0, 1.0],
the documentation must say something about it.

If there is no way to know, then documentation must say you don't know
(or that it is hardware-specific, which to generic userspace is the
same thing).

If userspace does not know what happens, then obviously it will avoid
using values it does not know what happens with.

For example, let's say that blending can produce values outside of
[0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
you clamp them to the unit range? Does the clamping still happen even
when the LUT is in pass-through mode?

And in general, how big or how negative values will actually go through
the pipeline?

Of course the background color property should not document everything
above, but it must say something, like "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." That makes the handling unknown to generic userspace, but
userspace drivers could make use of it.

The important bit is to understand that the background color values may
sometimes (when?) not reach the sink unmodified even if userspace has
configured the KMS pipeline to not modify them.

I would expect that values in [0.0, 1.0] have no problem passing
through the KMS pipeline unharmed, and there are obvious expectations
about how a LUT or a CTM processes them. But as soon as values outside
of that range are possible, a whole slew of questions arises. The
documentation must not be silent, it must set expectations like "it's
hardware specific" if that's what it is.


Thanks,
pq

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 8023 bytes --]

On Wed, 14 Jul 2021 12:13:58 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> > On Tue, 13 Jul 2021 09:54:35 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
> >>> On Mon, 12 Jul 2021 12:15:59 -0400
> >>> Harry Wentland <harry.wentland@amd.com> wrote:
> >>>     
> >>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
> >>>>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>       
> >>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
> >>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>>>        
> >>>>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>>>> the rest of the content.
> >>>>>>>>
> >>>>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>>>> values in this standard format with varying component precision values.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>>>> ---
> >>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
> >>>
> >>> ...
> >>>     
> >>>>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>>>> the background color will be used as-is in the blending stage, so
> >>>>>>> userspace can just program the correct value that fits the pipeline it
> >>>>>>> is setting up.
> >>>>>>>
> >>>>>>> One more question is, as HDR exists, could we need background colors
> >>>>>>> with component values greater than 1.0?        
> >>>>>>
> >>>>>> AR4H color format should cover that case, isn't it ?      
> >>>>>
> >>>>> Yes, but with the inconvenience I mentioned.
> >>>>>
> >>>>> This is a genuine question though, would anyone actually need
> >>>>> background color values > 1.0. I don't know of any case yet where it
> >>>>> would be required. It would imply that plane blending happens in a
> >>>>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>>>> hardware supporting that exists.
> >>>>>
> >>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>>>> is useful, and mention in the commit message that if someone really
> >>>>> needs values outside of that, they should create another background
> >>>>> color property. Then, you can pick a simple unsigned integer pixel
> >>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>>>> drm_fourcc.h though.)
> >>>>>       
> >>>>
> >>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >>>> mentioned above when talking about full vs limited, the userspace
> >>>> understands what's the correct value that fits the pipeline. If that
> >>>> pipeline is FP16 with > 1.0 values then it would make sense that the
> >>>> background color can be > 1.0.    
> >>>
> >>> Ok. The standard FP32 format then for ease of use and guaranteed enough
> >>> range and precision for far into the future?
> >>>     
> >>
> >> I don't have a strong preference for FP16 vs FP32. My understanding is
> >> that FP16 is enough to represent linearly encoded data in a way that
> >> looks smooth to humans.
> >>
> >> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> >>  
> >>> Or do you want to keep it in 64 bits total, so the UABI can pack
> >>> everything into a u64 instead of needing to create a blob?
> >>>
> >>> I don't mind as long as it's clearly documented what it is and how it
> >>> works, and it carries enough precision.
> >>>
> >>> But FP16 with its 10 bits of precision might be too little for integer
> >>> 12-16 bpc pipelines and sinks?  
> > 
> > The 10 bits worries me still.
> > 
> > If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> > limits precision to 10 bits (in the upper half of the range?).
> >   
> >>>
> >>> If the values can go beyond [0.0, 1.0] range, then does the blending
> >>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> >>> do they get clamped anyway?
> >>>     
> >>
> >> That probably depends on the HW and how it's configured. AMD HW can handle
> >> values above and below [0.0, 1.0].  
> > 
> > Right, so how would userspace know what will happen?
> > 
> > Or do we need to specify that while values outside that unit range are
> > expressable, it is hardware-specific on how they will behave, so
> > generic userspace should not attempt to use values outside of the unit
> > range?
> > 
> > I guess this caveat should be documented for everything, not just for
> > background color? LUT inputs and outputs, CTM input and output ranges,
> > FB formats...
> >   
> 
> I'm not sure we should artificially limit the interface at this point, or
> document hypotheticals. At this point I don't even know whether going beyond
> [0.0, 1.0] would be a challenge for any HW that supports floating point
> formats.

Exactly, we don't know. Yet we have to document how background color
works. If background color can express values outside of [0.0, 1.0],
the documentation must say something about it.

If there is no way to know, then documentation must say you don't know
(or that it is hardware-specific, which to generic userspace is the
same thing).

If userspace does not know what happens, then obviously it will avoid
using values it does not know what happens with.

For example, let's say that blending can produce values outside of
[0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
you clamp them to the unit range? Does the clamping still happen even
when the LUT is in pass-through mode?

And in general, how big or how negative values will actually go through
the pipeline?

Of course the background color property should not document everything
above, but it must say something, like "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." That makes the handling unknown to generic userspace, but
userspace drivers could make use of it.

The important bit is to understand that the background color values may
sometimes (when?) not reach the sink unmodified even if userspace has
configured the KMS pipeline to not modify them.

I would expect that values in [0.0, 1.0] have no problem passing
through the KMS pipeline unharmed, and there are obvious expectations
about how a LUT or a CTM processes them. But as soon as values outside
of that range are possible, a whole slew of questions arises. The
documentation must not be silent, it must set expectations like "it's
hardware specific" if that's what it is.


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Pekka Paalanen]

[-- Attachment #1: Type: text/plain, Size: 8023 bytes --]

On Wed, 14 Jul 2021 12:13:58 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
> > On Tue, 13 Jul 2021 09:54:35 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >   
> >> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
> >>> On Mon, 12 Jul 2021 12:15:59 -0400
> >>> Harry Wentland <harry.wentland@amd.com> wrote:
> >>>     
> >>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
> >>>>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>       
> >>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
> >>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>>>        
> >>>>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
> >>>>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>>>> the rest of the content.
> >>>>>>>>
> >>>>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>>>> value.  Helper functions and macros are provided to generate and dissect
> >>>>>>>> values in this standard format with varying component precision values.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>>>> ---
> >>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
> >>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
> >>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
> >>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
> >>>>>>>>   include/drm/drm_blend.h                   |  1 +
> >>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
> >>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
> >>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
> >>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
> >>>
> >>> ...
> >>>     
> >>>>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>>>> the background color will be used as-is in the blending stage, so
> >>>>>>> userspace can just program the correct value that fits the pipeline it
> >>>>>>> is setting up.
> >>>>>>>
> >>>>>>> One more question is, as HDR exists, could we need background colors
> >>>>>>> with component values greater than 1.0?        
> >>>>>>
> >>>>>> AR4H color format should cover that case, isn't it ?      
> >>>>>
> >>>>> Yes, but with the inconvenience I mentioned.
> >>>>>
> >>>>> This is a genuine question though, would anyone actually need
> >>>>> background color values > 1.0. I don't know of any case yet where it
> >>>>> would be required. It would imply that plane blending happens in a
> >>>>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>>>> hardware supporting that exists.
> >>>>>
> >>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>>>> is useful, and mention in the commit message that if someone really
> >>>>> needs values outside of that, they should create another background
> >>>>> color property. Then, you can pick a simple unsigned integer pixel
> >>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>>>> drm_fourcc.h though.)
> >>>>>       
> >>>>
> >>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >>>> mentioned above when talking about full vs limited, the userspace
> >>>> understands what's the correct value that fits the pipeline. If that
> >>>> pipeline is FP16 with > 1.0 values then it would make sense that the
> >>>> background color can be > 1.0.    
> >>>
> >>> Ok. The standard FP32 format then for ease of use and guaranteed enough
> >>> range and precision for far into the future?
> >>>     
> >>
> >> I don't have a strong preference for FP16 vs FP32. My understanding is
> >> that FP16 is enough to represent linearly encoded data in a way that
> >> looks smooth to humans.
> >>
> >> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
> >>  
> >>> Or do you want to keep it in 64 bits total, so the UABI can pack
> >>> everything into a u64 instead of needing to create a blob?
> >>>
> >>> I don't mind as long as it's clearly documented what it is and how it
> >>> works, and it carries enough precision.
> >>>
> >>> But FP16 with its 10 bits of precision might be too little for integer
> >>> 12-16 bpc pipelines and sinks?  
> > 
> > The 10 bits worries me still.
> > 
> > If you have a pipeline that works in [0.0, 1.0] range only, then FP16
> > limits precision to 10 bits (in the upper half of the range?).
> >   
> >>>
> >>> If the values can go beyond [0.0, 1.0] range, then does the blending
> >>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> >>> do they get clamped anyway?
> >>>     
> >>
> >> That probably depends on the HW and how it's configured. AMD HW can handle
> >> values above and below [0.0, 1.0].  
> > 
> > Right, so how would userspace know what will happen?
> > 
> > Or do we need to specify that while values outside that unit range are
> > expressable, it is hardware-specific on how they will behave, so
> > generic userspace should not attempt to use values outside of the unit
> > range?
> > 
> > I guess this caveat should be documented for everything, not just for
> > background color? LUT inputs and outputs, CTM input and output ranges,
> > FB formats...
> >   
> 
> I'm not sure we should artificially limit the interface at this point, or
> document hypotheticals. At this point I don't even know whether going beyond
> [0.0, 1.0] would be a challenge for any HW that supports floating point
> formats.

Exactly, we don't know. Yet we have to document how background color
works. If background color can express values outside of [0.0, 1.0],
the documentation must say something about it.

If there is no way to know, then documentation must say you don't know
(or that it is hardware-specific, which to generic userspace is the
same thing).

If userspace does not know what happens, then obviously it will avoid
using values it does not know what happens with.

For example, let's say that blending can produce values outside of
[0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
you clamp them to the unit range? Does the clamping still happen even
when the LUT is in pass-through mode?

And in general, how big or how negative values will actually go through
the pipeline?

Of course the background color property should not document everything
above, but it must say something, like "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." That makes the handling unknown to generic userspace, but
userspace drivers could make use of it.

The important bit is to understand that the background color values may
sometimes (when?) not reach the sink unmodified even if userspace has
configured the KMS pipeline to not modify them.

I would expect that values in [0.0, 1.0] have no problem passing
through the KMS pipeline unharmed, and there are obvious expectations
about how a LUT or a CTM processes them. But as soon as values outside
of that range are possible, a whole slew of questions arises. The
documentation must not be silent, it must set expectations like "it's
hardware specific" if that's what it is.


Thanks,
pq

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-15 5:34 a.m., Pekka Paalanen wrote:
> On Wed, 14 Jul 2021 12:13:58 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
>>> On Tue, 13 Jul 2021 09:54:35 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
>>>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>>>     
>>>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
>>>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>       
>>>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
>>>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>>>        
>>>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>>>> the rest of the content.
>>>>>>>>>>
>>>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>>>> ---
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
>>>>>
>>>>> ...
>>>>>     
>>>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>>>> is setting up.
>>>>>>>>>
>>>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>>>> with component values greater than 1.0?        
>>>>>>>>
>>>>>>>> AR4H color format should cover that case, isn't it ?      
>>>>>>>
>>>>>>> Yes, but with the inconvenience I mentioned.
>>>>>>>
>>>>>>> This is a genuine question though, would anyone actually need
>>>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>>>> would be required. It would imply that plane blending happens in a
>>>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>>>> hardware supporting that exists.
>>>>>>>
>>>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>>>> is useful, and mention in the commit message that if someone really
>>>>>>> needs values outside of that, they should create another background
>>>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>>>> drm_fourcc.h though.)
>>>>>>>       
>>>>>>
>>>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>>>> mentioned above when talking about full vs limited, the userspace
>>>>>> understands what's the correct value that fits the pipeline. If that
>>>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>>>> background color can be > 1.0.    
>>>>>
>>>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>>>> range and precision for far into the future?
>>>>>     
>>>>
>>>> I don't have a strong preference for FP16 vs FP32. My understanding is
>>>> that FP16 is enough to represent linearly encoded data in a way that
>>>> looks smooth to humans.
>>>>
>>>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>>>  
>>>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>>>> everything into a u64 instead of needing to create a blob?
>>>>>
>>>>> I don't mind as long as it's clearly documented what it is and how it
>>>>> works, and it carries enough precision.
>>>>>
>>>>> But FP16 with its 10 bits of precision might be too little for integer
>>>>> 12-16 bpc pipelines and sinks?  
>>>
>>> The 10 bits worries me still.
>>>
>>> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
>>> limits precision to 10 bits (in the upper half of the range?).
>>>   
>>>>>
>>>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>>>> do they get clamped anyway?
>>>>>     
>>>>
>>>> That probably depends on the HW and how it's configured. AMD HW can handle
>>>> values above and below [0.0, 1.0].  
>>>
>>> Right, so how would userspace know what will happen?
>>>
>>> Or do we need to specify that while values outside that unit range are
>>> expressable, it is hardware-specific on how they will behave, so
>>> generic userspace should not attempt to use values outside of the unit
>>> range?
>>>
>>> I guess this caveat should be documented for everything, not just for
>>> background color? LUT inputs and outputs, CTM input and output ranges,
>>> FB formats...
>>>   
>>
>> I'm not sure we should artificially limit the interface at this point, or
>> document hypotheticals. At this point I don't even know whether going beyond
>> [0.0, 1.0] would be a challenge for any HW that supports floating point
>> formats.
> 
> Exactly, we don't know. Yet we have to document how background color
> works. If background color can express values outside of [0.0, 1.0],
> the documentation must say something about it.
> 
> If there is no way to know, then documentation must say you don't know
> (or that it is hardware-specific, which to generic userspace is the
> same thing).
> 
> If userspace does not know what happens, then obviously it will avoid
> using values it does not know what happens with.
> 
> For example, let's say that blending can produce values outside of
> [0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
> LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
> you clamp them to the unit range? Does the clamping still happen even
> when the LUT is in pass-through mode?
> 
> And in general, how big or how negative values will actually go through
> the pipeline?
> 
> Of course the background color property should not document everything
> above, but it must say something, like "The handling of values outside
> of [0.0, 1.0] depends on the capabilities of the hardware blending
> engine." That makes the handling unknown to generic userspace, but
> userspace drivers could make use of it.
> 
> The important bit is to understand that the background color values may
> sometimes (when?) not reach the sink unmodified even if userspace has
> configured the KMS pipeline to not modify them.
> 
> I would expect that values in [0.0, 1.0] have no problem passing
> through the KMS pipeline unharmed, and there are obvious expectations
> about how a LUT or a CTM processes them. But as soon as values outside
> of that range are possible, a whole slew of questions arises. The
> documentation must not be silent, it must set expectations like "it's
> hardware specific" if that's what it is.
> 

Agreed. I think ultimately we don't know because we haven't gotten to
use-cases like that.

I'm fine with documentation stating "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." or "Handling of values outside [0.0, 1.0] is currently
undefined."

Harry

> 
> Thanks,
> pq
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-15 5:34 a.m., Pekka Paalanen wrote:
> On Wed, 14 Jul 2021 12:13:58 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
>>> On Tue, 13 Jul 2021 09:54:35 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
>>>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>>>     
>>>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
>>>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>       
>>>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
>>>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>>>        
>>>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>>>> the rest of the content.
>>>>>>>>>>
>>>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>>>> ---
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
>>>>>
>>>>> ...
>>>>>     
>>>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>>>> is setting up.
>>>>>>>>>
>>>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>>>> with component values greater than 1.0?        
>>>>>>>>
>>>>>>>> AR4H color format should cover that case, isn't it ?      
>>>>>>>
>>>>>>> Yes, but with the inconvenience I mentioned.
>>>>>>>
>>>>>>> This is a genuine question though, would anyone actually need
>>>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>>>> would be required. It would imply that plane blending happens in a
>>>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>>>> hardware supporting that exists.
>>>>>>>
>>>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>>>> is useful, and mention in the commit message that if someone really
>>>>>>> needs values outside of that, they should create another background
>>>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>>>> drm_fourcc.h though.)
>>>>>>>       
>>>>>>
>>>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>>>> mentioned above when talking about full vs limited, the userspace
>>>>>> understands what's the correct value that fits the pipeline. If that
>>>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>>>> background color can be > 1.0.    
>>>>>
>>>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>>>> range and precision for far into the future?
>>>>>     
>>>>
>>>> I don't have a strong preference for FP16 vs FP32. My understanding is
>>>> that FP16 is enough to represent linearly encoded data in a way that
>>>> looks smooth to humans.
>>>>
>>>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>>>  
>>>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>>>> everything into a u64 instead of needing to create a blob?
>>>>>
>>>>> I don't mind as long as it's clearly documented what it is and how it
>>>>> works, and it carries enough precision.
>>>>>
>>>>> But FP16 with its 10 bits of precision might be too little for integer
>>>>> 12-16 bpc pipelines and sinks?  
>>>
>>> The 10 bits worries me still.
>>>
>>> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
>>> limits precision to 10 bits (in the upper half of the range?).
>>>   
>>>>>
>>>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>>>> do they get clamped anyway?
>>>>>     
>>>>
>>>> That probably depends on the HW and how it's configured. AMD HW can handle
>>>> values above and below [0.0, 1.0].  
>>>
>>> Right, so how would userspace know what will happen?
>>>
>>> Or do we need to specify that while values outside that unit range are
>>> expressable, it is hardware-specific on how they will behave, so
>>> generic userspace should not attempt to use values outside of the unit
>>> range?
>>>
>>> I guess this caveat should be documented for everything, not just for
>>> background color? LUT inputs and outputs, CTM input and output ranges,
>>> FB formats...
>>>   
>>
>> I'm not sure we should artificially limit the interface at this point, or
>> document hypotheticals. At this point I don't even know whether going beyond
>> [0.0, 1.0] would be a challenge for any HW that supports floating point
>> formats.
> 
> Exactly, we don't know. Yet we have to document how background color
> works. If background color can express values outside of [0.0, 1.0],
> the documentation must say something about it.
> 
> If there is no way to know, then documentation must say you don't know
> (or that it is hardware-specific, which to generic userspace is the
> same thing).
> 
> If userspace does not know what happens, then obviously it will avoid
> using values it does not know what happens with.
> 
> For example, let's say that blending can produce values outside of
> [0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
> LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
> you clamp them to the unit range? Does the clamping still happen even
> when the LUT is in pass-through mode?
> 
> And in general, how big or how negative values will actually go through
> the pipeline?
> 
> Of course the background color property should not document everything
> above, but it must say something, like "The handling of values outside
> of [0.0, 1.0] depends on the capabilities of the hardware blending
> engine." That makes the handling unknown to generic userspace, but
> userspace drivers could make use of it.
> 
> The important bit is to understand that the background color values may
> sometimes (when?) not reach the sink unmodified even if userspace has
> configured the KMS pipeline to not modify them.
> 
> I would expect that values in [0.0, 1.0] have no problem passing
> through the KMS pipeline unharmed, and there are obvious expectations
> about how a LUT or a CTM processes them. But as soon as values outside
> of that range are possible, a whole slew of questions arises. The
> documentation must not be silent, it must set expectations like "it's
> hardware specific" if that's what it is.
> 

Agreed. I think ultimately we don't know because we haven't gotten to
use-cases like that.

I'm fine with documentation stating "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." or "Handling of values outside [0.0, 1.0] is currently
undefined."

Harry

> 
> Thanks,
> pq
> 

Re: [PATCH 1/2] drm: add crtc background color property

[Harry Wentland]

On 2021-07-15 5:34 a.m., Pekka Paalanen wrote:
> On Wed, 14 Jul 2021 12:13:58 -0400
> Harry Wentland <harry.wentland@amd.com> wrote:
> 
>> On 2021-07-14 3:35 a.m., Pekka Paalanen wrote:
>>> On Tue, 13 Jul 2021 09:54:35 -0400
>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>   
>>>> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:  
>>>>> On Mon, 12 Jul 2021 12:15:59 -0400
>>>>> Harry Wentland <harry.wentland@amd.com> wrote:
>>>>>     
>>>>>> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:    
>>>>>>> On Fri, 9 Jul 2021 18:23:26 +0200
>>>>>>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>       
>>>>>>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:      
>>>>>>>>> On Wed, 7 Jul 2021 08:48:47 +0000
>>>>>>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
>>>>>>>>>        
>>>>>>>>>> Some display controllers can be programmed to present non-black colors
>>>>>>>>>> for pixels not covered by any plane (or pixels covered by the
>>>>>>>>>> transparent regions of higher planes).  Compositors that want a UI with
>>>>>>>>>> a solid color background can potentially save memory bandwidth by
>>>>>>>>>> setting the CRTC background property and using smaller planes to display
>>>>>>>>>> the rest of the content.
>>>>>>>>>>
>>>>>>>>>> To avoid confusion between different ways of encoding RGB data, we
>>>>>>>>>> define a standard 64-bit format that should be used for this property's
>>>>>>>>>> value.  Helper functions and macros are provided to generate and dissect
>>>>>>>>>> values in this standard format with varying component precision values.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>>>>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>>>>>>>>>> ---
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>>>>>>>>>   drivers/gpu/drm/drm_atomic_uapi.c         |  4 +++
>>>>>>>>>>   drivers/gpu/drm/drm_blend.c               | 34 +++++++++++++++++++++--
>>>>>>>>>>   drivers/gpu/drm/drm_mode_config.c         |  6 ++++
>>>>>>>>>>   include/drm/drm_blend.h                   |  1 +
>>>>>>>>>>   include/drm/drm_crtc.h                    | 12 ++++++++
>>>>>>>>>>   include/drm/drm_mode_config.h             |  5 ++++
>>>>>>>>>>   include/uapi/drm/drm_mode.h               | 28 +++++++++++++++++++
>>>>>>>>>>   8 files changed, 89 insertions(+), 2 deletions(-)    
>>>>>
>>>>> ...
>>>>>     
>>>>>>>>> The question about full vs. limited range seems unnecessary to me, as
>>>>>>>>> the background color will be used as-is in the blending stage, so
>>>>>>>>> userspace can just program the correct value that fits the pipeline it
>>>>>>>>> is setting up.
>>>>>>>>>
>>>>>>>>> One more question is, as HDR exists, could we need background colors
>>>>>>>>> with component values greater than 1.0?        
>>>>>>>>
>>>>>>>> AR4H color format should cover that case, isn't it ?      
>>>>>>>
>>>>>>> Yes, but with the inconvenience I mentioned.
>>>>>>>
>>>>>>> This is a genuine question though, would anyone actually need
>>>>>>> background color values > 1.0. I don't know of any case yet where it
>>>>>>> would be required. It would imply that plane blending happens in a
>>>>>>> color space where >1.0 values are meaningful. I'm not even sure if any
>>>>>>> hardware supporting that exists.
>>>>>>>
>>>>>>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
>>>>>>> is useful, and mention in the commit message that if someone really
>>>>>>> needs values outside of that, they should create another background
>>>>>>> color property. Then, you can pick a simple unsigned integer pixel
>>>>>>> format, too. (I didn't see any 16 bit-per-channel formats like that in
>>>>>>> drm_fourcc.h though.)
>>>>>>>       
>>>>>>
>>>>>> I don't think we should artificially limit this to [0.0, 1.0]. As you
>>>>>> mentioned above when talking about full vs limited, the userspace
>>>>>> understands what's the correct value that fits the pipeline. If that
>>>>>> pipeline is FP16 with > 1.0 values then it would make sense that the
>>>>>> background color can be > 1.0.    
>>>>>
>>>>> Ok. The standard FP32 format then for ease of use and guaranteed enough
>>>>> range and precision for far into the future?
>>>>>     
>>>>
>>>> I don't have a strong preference for FP16 vs FP32. My understanding is
>>>> that FP16 is enough to represent linearly encoded data in a way that
>>>> looks smooth to humans.
>>>>
>>>> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>>>>  
>>>>> Or do you want to keep it in 64 bits total, so the UABI can pack
>>>>> everything into a u64 instead of needing to create a blob?
>>>>>
>>>>> I don't mind as long as it's clearly documented what it is and how it
>>>>> works, and it carries enough precision.
>>>>>
>>>>> But FP16 with its 10 bits of precision might be too little for integer
>>>>> 12-16 bpc pipelines and sinks?  
>>>
>>> The 10 bits worries me still.
>>>
>>> If you have a pipeline that works in [0.0, 1.0] range only, then FP16
>>> limits precision to 10 bits (in the upper half of the range?).
>>>   
>>>>>
>>>>> If the values can go beyond [0.0, 1.0] range, then does the blending
>>>>> hardware and the degamma/ctm/gamma coming afterwards cope with them, or
>>>>> do they get clamped anyway?
>>>>>     
>>>>
>>>> That probably depends on the HW and how it's configured. AMD HW can handle
>>>> values above and below [0.0, 1.0].  
>>>
>>> Right, so how would userspace know what will happen?
>>>
>>> Or do we need to specify that while values outside that unit range are
>>> expressable, it is hardware-specific on how they will behave, so
>>> generic userspace should not attempt to use values outside of the unit
>>> range?
>>>
>>> I guess this caveat should be documented for everything, not just for
>>> background color? LUT inputs and outputs, CTM input and output ranges,
>>> FB formats...
>>>   
>>
>> I'm not sure we should artificially limit the interface at this point, or
>> document hypotheticals. At this point I don't even know whether going beyond
>> [0.0, 1.0] would be a challenge for any HW that supports floating point
>> formats.
> 
> Exactly, we don't know. Yet we have to document how background color
> works. If background color can express values outside of [0.0, 1.0],
> the documentation must say something about it.
> 
> If there is no way to know, then documentation must say you don't know
> (or that it is hardware-specific, which to generic userspace is the
> same thing).
> 
> If userspace does not know what happens, then obviously it will avoid
> using values it does not know what happens with.
> 
> For example, let's say that blending can produce values outside of
> [0.0, 1.0]. The next step in the pipeline is DEGAMMA, which is a 1D
> LUT. How do you sample a 1D LUT with input values beyond [0.0, 1.0]? Do
> you clamp them to the unit range? Does the clamping still happen even
> when the LUT is in pass-through mode?
> 
> And in general, how big or how negative values will actually go through
> the pipeline?
> 
> Of course the background color property should not document everything
> above, but it must say something, like "The handling of values outside
> of [0.0, 1.0] depends on the capabilities of the hardware blending
> engine." That makes the handling unknown to generic userspace, but
> userspace drivers could make use of it.
> 
> The important bit is to understand that the background color values may
> sometimes (when?) not reach the sink unmodified even if userspace has
> configured the KMS pipeline to not modify them.
> 
> I would expect that values in [0.0, 1.0] have no problem passing
> through the KMS pipeline unharmed, and there are obvious expectations
> about how a LUT or a CTM processes them. But as soon as values outside
> of that range are possible, a whole slew of questions arises. The
> documentation must not be silent, it must set expectations like "it's
> hardware specific" if that's what it is.
> 

Agreed. I think ultimately we don't know because we haven't gotten to
use-cases like that.

I'm fine with documentation stating "The handling of values outside
of [0.0, 1.0] depends on the capabilities of the hardware blending
engine." or "Handling of values outside [0.0, 1.0] is currently
undefined."

Harry

> 
> Thanks,
> pq
> 

[PATCH 0/2] Introduce BACKGROUND_COLOR DRM CRTC property

[Cristian Ciocaltea]

Some display controllers can be hardware-configured to present non-black
colors for pixels which are not covered by any plane (or are exposed
through transparent regions of higher planes).

The first patch of the series introduces the BACKGROUND_COLOR DRM
property that can be attached to a CRTC via a dedicated helper function.
A 64-bit ARGB color value format is also defined and can be manipulated
with the help of a few utility macros.

Note this is a reworked version of the patch [1] submitted (many) years
ago by Matt Roper.  The main changes are:

* Dropped drm_arg() in favor of drm_argb64() to get rid of the bpc
  parameter and the related shifting for more flexibility in operation,
  e.g. when user-space cannot make use of the helper and/or when it
  doesn't now the actual precision supported by the HW.  This also
  simplifies the property verification/validation testing (see below).
  It works by extracting the specified number of least-significant bits
  from each color component.
* Renamed DRM_ARGB_*() to DRM_ARGB64_*_LSB() while providing convenience
  wrappers to extract all 16 bits of a specific color via DRM_ARGB64_*()
* Replaced GENMASK_ULL(63, 0) with U64_MAX when calling
  drm_property_create_range() to create the BACKGROUND_COLOR property
* Moved crtc_state->bgcolor initialization from
  __drm_atomic_helper_crtc_reset() to
  __drm_atomic_helper_crtc_state_reset()
* Replaced '*bgcolor*' occurrences to '*background_color*' for
  consistency with the actual property name in both storage field and
  helper functions names

The second patch adds background color support to the VOP2 display
controller used in the RK3568, RK3576, and RK3588 Rockchip SoC families.

For the moment this has been validated using a modetest wrapper script
[2], which is able to execute several tests - see an example of a
generated report at the end.  Proper support in Weston is currently in
development, and I will provide a reference once it becomes available.

The tests were performed on the Radxa boards listed below.  Please note
that as of next-20250901, there are a few known regressions; for each
case, I mentioned the actual problem and its related fix/workaround
accordingly:

* ROCK 3A (RK3568)
 - issue: broken networking
 - fix: revert commit da114122b831 ("net: ethernet: stmmac: dwmac-rk: Make
   the clk_phy could be used for external phy")

* ROCK 4D (RK3576)
 - issue: random freezes right after booting
 - fix: add regulator_ignore_unused to kernel cmdline

* ROCK 5B (RK3588)
 - issue: broken networking
 - fix: apply patch [3]

[1] https://lore.kernel.org/all/20190930224707.14904-2-matthew.d.roper@intel.com/
[2] https://gitlab.collabora.com/cristicc/linux-next/-/commits/drm-vop2-bgcolor-test
[3] https://lore.kernel.org/all/20250827230943.17829-1-inochiama@gmail.com/

Validation report on ROCK 5B
============================

$ tools/testing/rk-bgcol-test.sh

---------------------------------------------------------------
 Available Rockchip display connectors
---------------------------------------------------------------
id	type	status	crtc_id	plane_id
85	11	2	0	34
88	11	1	83	40

Selected connector: id=88 crtc=83 plane=40

---------------------------------------------------------------
 Check initial state
---------------------------------------------------------------
Read BACKGROUND_COLOR prop (ARGB64): 0xffff000000000000
    Connector: HDMI-A-2
	background color (10bpc): r=0 g=0 b=0

---------------------------------------------------------------
 Set/get DRM property
---------------------------------------------------------------
Changing prop value to: 0xffff00000000ffff
opened device `RockChip Soc DRM` on driver `rockchip` (version 1.0.0 at 0)
Read BACKGROUND_COLOR prop (ARGB64): 0xffff00000000ffff
    Connector: HDMI-A-2
	background color (10bpc): r=0 g=0 b=ffff

---------------------------------------------------------------
 Plane display test 40@83:960x540+480+270
---------------------------------------------------------------

Changing prop value to 0xffffffff00000000
Press ENTER to continue..
opened device `RockChip Soc DRM` on driver `rockchip` (version 1.0.0 at 0)
testing 960x540@XR24 overlay plane 40

Read BACKGROUND_COLOR prop (ARGB64): 0xffffffff00000000
    Connector: HDMI-A-2
	background color (10bpc): r=ffff g=0 b=0

Changing prop value to 0xffff0000ffff0000
Press ENTER to continue..
opened device `RockChip Soc DRM` on driver `rockchip` (version 1.0.0 at 0)
testing 960x540@XR24 overlay plane 40

Read BACKGROUND_COLOR prop (ARGB64): 0xffff0000ffff0000
    Connector: HDMI-A-2
	background color (10bpc): r=0 g=ffff b=0

Changing prop value to 0xffff00000000ffff
Press ENTER to continue..
opened device `RockChip Soc DRM` on driver `rockchip` (version 1.0.0 at 0)
testing 960x540@XR24 overlay plane 40

Read BACKGROUND_COLOR prop (ARGB64): 0xffff00000000ffff
    Connector: HDMI-A-2
	background color (10bpc): r=0 g=0 b=ffff

---------------------------------------------------------------
 Restoring state
---------------------------------------------------------------
Changing prop value to: 0xffff000000000000
opened device `RockChip Soc DRM` on driver `rockchip` (version 1.0.0 at 0)
Read BACKGROUND_COLOR prop (ARGB64): 0xffff000000000000
    Connector: HDMI-A-2
	background color (10bpc): r=0 g=0 b=0

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
Cristian Ciocaltea (2):
      drm: Add CRTC background color property
      drm/rockchip: vop2: Support setting custom background color

 drivers/gpu/drm/drm_atomic_state_helper.c    |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c            |  4 +++
 drivers/gpu/drm/drm_blend.c                  | 37 +++++++++++++++++++++++++---
 drivers/gpu/drm/drm_mode_config.c            |  6 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 13 +++++++++-
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.h |  4 +++
 include/drm/drm_blend.h                      |  4 ++-
 include/drm/drm_crtc.h                       | 12 +++++++++
 include/drm/drm_mode_config.h                |  5 ++++
 include/uapi/drm/drm_mode.h                  | 30 ++++++++++++++++++++++
 10 files changed, 110 insertions(+), 6 deletions(-)
---
base-commit: d0630b758e593506126e8eda6c3d56097d1847c5
change-id: 20250829-rk3588-bgcolor-c1a7b9a507bc

[PATCH 1/2] drm: Add CRTC background color property

[Cristian Ciocaltea]

Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes.  This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.

To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.

Additionally, define a 64-bit ARGB format value to be built with the
help of a dedicated drm_argb64() utility macro.  Individual color
components can be extracted with desired precision using the
corresponding DRM_ARGB64_*() macros.

Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
 drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
 drivers/gpu/drm/drm_mode_config.c         |  6 +++++
 include/drm/drm_blend.h                   |  4 +++-
 include/drm/drm_crtc.h                    | 12 ++++++++++
 include/drm/drm_mode_config.h             |  5 +++++
 include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
 8 files changed, 94 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 7142e163e618ea0d7d9d828e1bd9ff2a6ec0dfeb..359264cf467c5270b77f0b04548073bc92cb812e 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -75,6 +75,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
 				     struct drm_crtc *crtc)
 {
 	crtc_state->crtc = crtc;
+	crtc_state->background_color = drm_argb64(0xffff, 0, 0, 0);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 85dbdaa4a2e25878c953b9b41539c8566d55c6d9..a447cb119aaa6cd11348be77b39f342a1386836d 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -407,6 +407,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 					&replaced);
 		state->color_mgmt_changed |= replaced;
 		return ret;
+	} else if (property == config->background_color_property) {
+		state->background_color = val;
 	} else if (property == config->prop_out_fence_ptr) {
 		s32 __user *fence_ptr = u64_to_user_ptr(val);
 
@@ -452,6 +454,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = (state->ctm) ? state->ctm->base.id : 0;
 	else if (property == config->gamma_lut_property)
 		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
+	else if (property == config->background_color_property)
+		*val = state->background_color;
 	else if (property == config->prop_out_fence_ptr)
 		*val = 0;
 	else if (property == crtc->scaling_filter_property)
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 6852d73c931ce32e62062e2b8f8c5e38612d5210..5a287d12685b007a2732f510f62675f500e53727 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -191,10 +191,6 @@
  *		 plane does not expose the "alpha" property, then this is
  *		 assumed to be 1.0
  *
- * Note that all the property extensions described here apply either to the
- * plane or the CRTC (e.g. for the background color, which currently is not
- * exposed and assumed to be black).
- *
  * SCALING_FILTER:
  *     Indicates scaling filter to be used for plane scaler
  *
@@ -207,6 +203,23 @@
  *
  * Drivers can set up this property for a plane by calling
  * drm_plane_create_scaling_filter_property
+ *
+ * The property extensions described above all apply to the plane.  Drivers
+ * may also expose the following crtc property extension:
+ *
+ * BACKGROUND_COLOR:
+ *	Background color is set via drm_crtc_attach_background_color_property().
+ *	It controls the ARGB color of a full-screen layer that exists below all
+ *	planes.  This color will be used for pixels not covered by any plane and
+ *	may also be blended with plane contents as allowed by a plane's alpha
+ *	values.  The background color defaults to black, and is assumed to be
+ *	black for drivers that do not expose this property.  Although background
+ *	color isn't a plane, it is assumed that the color provided here
+ *	undergoes the same pipe-level degamma/CSC/gamma transformations that
+ *	planes undergo.  Note that the color value provided here includes an
+ *	alpha channel, hence non-opaque background color values are allowed, but
+ *	are generally only honored in special cases (e.g. when a memory
+ *	writeback connector is in use).
  */
 
 /**
@@ -621,3 +634,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 	return 0;
 }
 EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
+
+/**
+ * drm_crtc_attach_background_color_property - attach background color property
+ * @crtc: drm crtc
+ *
+ * Attaches the background color property to @crtc.  The property defaults to
+ * solid black and will accept 64-bit ARGB values in the format generated by
+ * drm_argb64().
+ */
+void drm_crtc_attach_background_color_property(struct drm_crtc *crtc)
+{
+	drm_object_attach_property(&crtc->base,
+				   crtc->dev->mode_config.background_color_property,
+				   drm_argb64(0xffff, 0, 0, 0));
+}
+EXPORT_SYMBOL(drm_crtc_attach_background_color_property);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 25f376869b3a41d47bbe72b0df3e35cad142f3e6..6d70bfab45ca2bb81ed3ca1940fd1cd85e8cc58e 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -375,6 +375,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.gamma_lut_size_property = prop;
 
+	prop = drm_property_create_range(dev, 0,
+					 "BACKGROUND_COLOR", 0, U64_MAX);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.background_color_property = prop;
+
 	prop = drm_property_create(dev,
 				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
 				   "IN_FORMATS", 0);
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 88bdfec3bd8848acd1ef5742aaaa23483b332a2e..c7e888767c81c2745cd3cce88c10db4bbe305d1e 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -31,8 +31,9 @@
 #define DRM_MODE_BLEND_COVERAGE		1
 #define DRM_MODE_BLEND_PIXEL_NONE	2
 
-struct drm_device;
 struct drm_atomic_state;
+struct drm_crtc;
+struct drm_device;
 struct drm_plane;
 
 static inline bool drm_rotation_90_or_270(unsigned int rotation)
@@ -58,4 +59,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
 int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 					 unsigned int supported_modes);
+void drm_crtc_attach_background_color_property(struct drm_crtc *crtc);
 #endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index caa56e039da2a748cf40ebf45b37158acda439d9..4653dacc1077b9ed8fb4cf27cc84530ba1706f6a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -274,6 +274,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @background_color:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built using drm_argb64(), while
+	 * the individual color components can be extracted with desired
+	 * precision via the DRM_ARGB64_*() macros.
+	 */
+	u64 background_color;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 2e848b816218584eb077ed887bf97705f012a622..ea422afec5c4108a223dc872e1b6835ffc596cc3 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -814,6 +814,11 @@ struct drm_mode_config {
 	 * gamma LUT as supported by the driver (read-only).
 	 */
 	struct drm_property *gamma_lut_size_property;
+	/**
+	 * @background_color_property: Optional CRTC property to set the
+	 * background color.
+	 */
+	struct drm_property *background_color_property;
 
 	/**
 	 * @suggested_x_property: Optional connector property with a hint for
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index a122bea2559387576150236e3a88f99c24ad3138..4bd6a8ca8868109bcbe21f9f6e9864519c9d03ec 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -1363,6 +1363,36 @@ struct drm_mode_closefb {
 	__u32 pad;
 };
 
+/*
+ * Put 16-bit ARGB values into a standard 64-bit representation that
+ * can be used for ioctl parameters, inter-driver communication, etc.
+ */
+static inline __u64
+drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
+{
+	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
+}
+
+/*
+ * Extract the specified number of least-significant bits of a specific
+ * color component from a standard 64-bit ARGB value.
+ */
+#define DRM_ARGB64_COMP(c, shift, numlsb) \
+	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
+#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
+#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
+#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
+#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
+
+/*
+ * Convenience wrappers to extract all 16 bits of a specific color
+ * component from a standard 64-bit ARGB value.
+ */
+#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
+#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
+#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
+#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
+
 #if defined(__cplusplus)
 }
 #endif

-- 
2.51.0

[PATCH 1/2] drm: Add CRTC background color property

[Cristian Ciocaltea]

Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes.  This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.

To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.

Additionally, define a 64-bit ARGB format value to be built with the
help of a dedicated drm_argb64() utility macro.  Individual color
components can be extracted with desired precision using the
corresponding DRM_ARGB64_*() macros.

Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
 drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
 drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
 drivers/gpu/drm/drm_mode_config.c         |  6 +++++
 include/drm/drm_blend.h                   |  4 +++-
 include/drm/drm_crtc.h                    | 12 ++++++++++
 include/drm/drm_mode_config.h             |  5 +++++
 include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
 8 files changed, 94 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
index 7142e163e618ea0d7d9d828e1bd9ff2a6ec0dfeb..359264cf467c5270b77f0b04548073bc92cb812e 100644
--- a/drivers/gpu/drm/drm_atomic_state_helper.c
+++ b/drivers/gpu/drm/drm_atomic_state_helper.c
@@ -75,6 +75,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
 				     struct drm_crtc *crtc)
 {
 	crtc_state->crtc = crtc;
+	crtc_state->background_color = drm_argb64(0xffff, 0, 0, 0);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
 
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 85dbdaa4a2e25878c953b9b41539c8566d55c6d9..a447cb119aaa6cd11348be77b39f342a1386836d 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -407,6 +407,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
 					&replaced);
 		state->color_mgmt_changed |= replaced;
 		return ret;
+	} else if (property == config->background_color_property) {
+		state->background_color = val;
 	} else if (property == config->prop_out_fence_ptr) {
 		s32 __user *fence_ptr = u64_to_user_ptr(val);
 
@@ -452,6 +454,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
 		*val = (state->ctm) ? state->ctm->base.id : 0;
 	else if (property == config->gamma_lut_property)
 		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
+	else if (property == config->background_color_property)
+		*val = state->background_color;
 	else if (property == config->prop_out_fence_ptr)
 		*val = 0;
 	else if (property == crtc->scaling_filter_property)
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 6852d73c931ce32e62062e2b8f8c5e38612d5210..5a287d12685b007a2732f510f62675f500e53727 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -191,10 +191,6 @@
  *		 plane does not expose the "alpha" property, then this is
  *		 assumed to be 1.0
  *
- * Note that all the property extensions described here apply either to the
- * plane or the CRTC (e.g. for the background color, which currently is not
- * exposed and assumed to be black).
- *
  * SCALING_FILTER:
  *     Indicates scaling filter to be used for plane scaler
  *
@@ -207,6 +203,23 @@
  *
  * Drivers can set up this property for a plane by calling
  * drm_plane_create_scaling_filter_property
+ *
+ * The property extensions described above all apply to the plane.  Drivers
+ * may also expose the following crtc property extension:
+ *
+ * BACKGROUND_COLOR:
+ *	Background color is set via drm_crtc_attach_background_color_property().
+ *	It controls the ARGB color of a full-screen layer that exists below all
+ *	planes.  This color will be used for pixels not covered by any plane and
+ *	may also be blended with plane contents as allowed by a plane's alpha
+ *	values.  The background color defaults to black, and is assumed to be
+ *	black for drivers that do not expose this property.  Although background
+ *	color isn't a plane, it is assumed that the color provided here
+ *	undergoes the same pipe-level degamma/CSC/gamma transformations that
+ *	planes undergo.  Note that the color value provided here includes an
+ *	alpha channel, hence non-opaque background color values are allowed, but
+ *	are generally only honored in special cases (e.g. when a memory
+ *	writeback connector is in use).
  */
 
 /**
@@ -621,3 +634,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 	return 0;
 }
 EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
+
+/**
+ * drm_crtc_attach_background_color_property - attach background color property
+ * @crtc: drm crtc
+ *
+ * Attaches the background color property to @crtc.  The property defaults to
+ * solid black and will accept 64-bit ARGB values in the format generated by
+ * drm_argb64().
+ */
+void drm_crtc_attach_background_color_property(struct drm_crtc *crtc)
+{
+	drm_object_attach_property(&crtc->base,
+				   crtc->dev->mode_config.background_color_property,
+				   drm_argb64(0xffff, 0, 0, 0));
+}
+EXPORT_SYMBOL(drm_crtc_attach_background_color_property);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 25f376869b3a41d47bbe72b0df3e35cad142f3e6..6d70bfab45ca2bb81ed3ca1940fd1cd85e8cc58e 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -375,6 +375,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.gamma_lut_size_property = prop;
 
+	prop = drm_property_create_range(dev, 0,
+					 "BACKGROUND_COLOR", 0, U64_MAX);
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.background_color_property = prop;
+
 	prop = drm_property_create(dev,
 				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
 				   "IN_FORMATS", 0);
diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
index 88bdfec3bd8848acd1ef5742aaaa23483b332a2e..c7e888767c81c2745cd3cce88c10db4bbe305d1e 100644
--- a/include/drm/drm_blend.h
+++ b/include/drm/drm_blend.h
@@ -31,8 +31,9 @@
 #define DRM_MODE_BLEND_COVERAGE		1
 #define DRM_MODE_BLEND_PIXEL_NONE	2
 
-struct drm_device;
 struct drm_atomic_state;
+struct drm_crtc;
+struct drm_device;
 struct drm_plane;
 
 static inline bool drm_rotation_90_or_270(unsigned int rotation)
@@ -58,4 +59,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
 			      struct drm_atomic_state *state);
 int drm_plane_create_blend_mode_property(struct drm_plane *plane,
 					 unsigned int supported_modes);
+void drm_crtc_attach_background_color_property(struct drm_crtc *crtc);
 #endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index caa56e039da2a748cf40ebf45b37158acda439d9..4653dacc1077b9ed8fb4cf27cc84530ba1706f6a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -274,6 +274,18 @@ struct drm_crtc_state {
 	 */
 	struct drm_property_blob *gamma_lut;
 
+	/**
+	 * @background_color:
+	 *
+	 * RGB value representing the pipe's background color.  The background
+	 * color (aka "canvas color") of a pipe is the color that will be used
+	 * for pixels not covered by a plane, or covered by transparent pixels
+	 * of a plane.  The value here should be built using drm_argb64(), while
+	 * the individual color components can be extracted with desired
+	 * precision via the DRM_ARGB64_*() macros.
+	 */
+	u64 background_color;
+
 	/**
 	 * @target_vblank:
 	 *
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 2e848b816218584eb077ed887bf97705f012a622..ea422afec5c4108a223dc872e1b6835ffc596cc3 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -814,6 +814,11 @@ struct drm_mode_config {
 	 * gamma LUT as supported by the driver (read-only).
 	 */
 	struct drm_property *gamma_lut_size_property;
+	/**
+	 * @background_color_property: Optional CRTC property to set the
+	 * background color.
+	 */
+	struct drm_property *background_color_property;
 
 	/**
 	 * @suggested_x_property: Optional connector property with a hint for
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index a122bea2559387576150236e3a88f99c24ad3138..4bd6a8ca8868109bcbe21f9f6e9864519c9d03ec 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -1363,6 +1363,36 @@ struct drm_mode_closefb {
 	__u32 pad;
 };
 
+/*
+ * Put 16-bit ARGB values into a standard 64-bit representation that
+ * can be used for ioctl parameters, inter-driver communication, etc.
+ */
+static inline __u64
+drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
+{
+	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
+}
+
+/*
+ * Extract the specified number of least-significant bits of a specific
+ * color component from a standard 64-bit ARGB value.
+ */
+#define DRM_ARGB64_COMP(c, shift, numlsb) \
+	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
+#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
+#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
+#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
+#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
+
+/*
+ * Convenience wrappers to extract all 16 bits of a specific color
+ * component from a standard 64-bit ARGB value.
+ */
+#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
+#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
+#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
+#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
+
 #if defined(__cplusplus)
 }
 #endif

-- 
2.51.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/2] drm: Add CRTC background color property

[Ville Syrjälä]

On Tue, Sep 02, 2025 at 12:27:56PM +0300, Cristian Ciocaltea wrote:
> Some display controllers can be hardware programmed to show non-black
> colors for pixels that are either not covered by any plane or are
> exposed through transparent regions of higher planes.  This feature can
> help reduce memory bandwidth usage, e.g. in compositors managing a UI
> with a solid background color while using smaller planes to render the
> remaining content.
> 
> To support this capability, introduce the BACKGROUND_COLOR standard DRM
> mode property, which can be attached to a CRTC through the
> drm_crtc_attach_background_color_property() helper function.
> 
> Additionally, define a 64-bit ARGB format value to be built with the
> help of a dedicated drm_argb64() utility macro.  Individual color
> components can be extracted with desired precision using the
> corresponding DRM_ARGB64_*() macros.
> 
> Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
>  drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
>  drivers/gpu/drm/drm_mode_config.c         |  6 +++++
>  include/drm/drm_blend.h                   |  4 +++-
>  include/drm/drm_crtc.h                    | 12 ++++++++++
>  include/drm/drm_mode_config.h             |  5 +++++
>  include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
>  8 files changed, 94 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 7142e163e618ea0d7d9d828e1bd9ff2a6ec0dfeb..359264cf467c5270b77f0b04548073bc92cb812e 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -75,6 +75,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>  				     struct drm_crtc *crtc)
>  {
>  	crtc_state->crtc = crtc;
> +	crtc_state->background_color = drm_argb64(0xffff, 0, 0, 0);
>  }
>  EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>  
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index 85dbdaa4a2e25878c953b9b41539c8566d55c6d9..a447cb119aaa6cd11348be77b39f342a1386836d 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -407,6 +407,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  					&replaced);
>  		state->color_mgmt_changed |= replaced;
>  		return ret;
> +	} else if (property == config->background_color_property) {
> +		state->background_color = val;
>  	} else if (property == config->prop_out_fence_ptr) {
>  		s32 __user *fence_ptr = u64_to_user_ptr(val);
>  
> @@ -452,6 +454,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = (state->ctm) ? state->ctm->base.id : 0;
>  	else if (property == config->gamma_lut_property)
>  		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
> +	else if (property == config->background_color_property)
> +		*val = state->background_color;
>  	else if (property == config->prop_out_fence_ptr)
>  		*val = 0;
>  	else if (property == crtc->scaling_filter_property)
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index 6852d73c931ce32e62062e2b8f8c5e38612d5210..5a287d12685b007a2732f510f62675f500e53727 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -191,10 +191,6 @@
>   *		 plane does not expose the "alpha" property, then this is
>   *		 assumed to be 1.0
>   *
> - * Note that all the property extensions described here apply either to the
> - * plane or the CRTC (e.g. for the background color, which currently is not
> - * exposed and assumed to be black).
> - *
>   * SCALING_FILTER:
>   *     Indicates scaling filter to be used for plane scaler
>   *
> @@ -207,6 +203,23 @@
>   *
>   * Drivers can set up this property for a plane by calling
>   * drm_plane_create_scaling_filter_property
> + *
> + * The property extensions described above all apply to the plane.  Drivers
> + * may also expose the following crtc property extension:
> + *
> + * BACKGROUND_COLOR:
> + *	Background color is set via drm_crtc_attach_background_color_property().
> + *	It controls the ARGB color of a full-screen layer that exists below all
> + *	planes.  This color will be used for pixels not covered by any plane and
> + *	may also be blended with plane contents as allowed by a plane's alpha
> + *	values.  The background color defaults to black, and is assumed to be
> + *	black for drivers that do not expose this property.  Although background
> + *	color isn't a plane, it is assumed that the color provided here
> + *	undergoes the same pipe-level degamma/CSC/gamma transformations that
> + *	planes undergo.  Note that the color value provided here includes an
> + *	alpha channel, hence non-opaque background color values are allowed, but
> + *	are generally only honored in special cases (e.g. when a memory
> + *	writeback connector is in use).
>   */
>  
>  /**
> @@ -621,3 +634,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>  	return 0;
>  }
>  EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
> +
> +/**
> + * drm_crtc_attach_background_color_property - attach background color property
> + * @crtc: drm crtc
> + *
> + * Attaches the background color property to @crtc.  The property defaults to
> + * solid black and will accept 64-bit ARGB values in the format generated by
> + * drm_argb64().
> + */
> +void drm_crtc_attach_background_color_property(struct drm_crtc *crtc)
> +{
> +	drm_object_attach_property(&crtc->base,
> +				   crtc->dev->mode_config.background_color_property,
> +				   drm_argb64(0xffff, 0, 0, 0));
> +}
> +EXPORT_SYMBOL(drm_crtc_attach_background_color_property);
> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> index 25f376869b3a41d47bbe72b0df3e35cad142f3e6..6d70bfab45ca2bb81ed3ca1940fd1cd85e8cc58e 100644
> --- a/drivers/gpu/drm/drm_mode_config.c
> +++ b/drivers/gpu/drm/drm_mode_config.c
> @@ -375,6 +375,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.gamma_lut_size_property = prop;
>  
> +	prop = drm_property_create_range(dev, 0,
> +					 "BACKGROUND_COLOR", 0, U64_MAX);
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.background_color_property = prop;
> +
>  	prop = drm_property_create(dev,
>  				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
>  				   "IN_FORMATS", 0);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 88bdfec3bd8848acd1ef5742aaaa23483b332a2e..c7e888767c81c2745cd3cce88c10db4bbe305d1e 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -31,8 +31,9 @@
>  #define DRM_MODE_BLEND_COVERAGE		1
>  #define DRM_MODE_BLEND_PIXEL_NONE	2
>  
> -struct drm_device;
>  struct drm_atomic_state;
> +struct drm_crtc;
> +struct drm_device;
>  struct drm_plane;
>  
>  static inline bool drm_rotation_90_or_270(unsigned int rotation)
> @@ -58,4 +59,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
>  			      struct drm_atomic_state *state);
>  int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>  					 unsigned int supported_modes);
> +void drm_crtc_attach_background_color_property(struct drm_crtc *crtc);
>  #endif
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index caa56e039da2a748cf40ebf45b37158acda439d9..4653dacc1077b9ed8fb4cf27cc84530ba1706f6a 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -274,6 +274,18 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_property_blob *gamma_lut;
>  
> +	/**
> +	 * @background_color:
> +	 *
> +	 * RGB value representing the pipe's background color.  The background
> +	 * color (aka "canvas color") of a pipe is the color that will be used
> +	 * for pixels not covered by a plane, or covered by transparent pixels
> +	 * of a plane.  The value here should be built using drm_argb64(), while
> +	 * the individual color components can be extracted with desired
> +	 * precision via the DRM_ARGB64_*() macros.
> +	 */
> +	u64 background_color;
> +
>  	/**
>  	 * @target_vblank:
>  	 *
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 2e848b816218584eb077ed887bf97705f012a622..ea422afec5c4108a223dc872e1b6835ffc596cc3 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -814,6 +814,11 @@ struct drm_mode_config {
>  	 * gamma LUT as supported by the driver (read-only).
>  	 */
>  	struct drm_property *gamma_lut_size_property;
> +	/**
> +	 * @background_color_property: Optional CRTC property to set the
> +	 * background color.
> +	 */
> +	struct drm_property *background_color_property;
>  
>  	/**
>  	 * @suggested_x_property: Optional connector property with a hint for
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index a122bea2559387576150236e3a88f99c24ad3138..4bd6a8ca8868109bcbe21f9f6e9864519c9d03ec 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -1363,6 +1363,36 @@ struct drm_mode_closefb {
>  	__u32 pad;
>  };
>  
> +/*
> + * Put 16-bit ARGB values into a standard 64-bit representation that
> + * can be used for ioctl parameters, inter-driver communication, etc.
> + */
> +static inline __u64
> +drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
> +{
> +	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
> +}
> +
> +/*
> + * Extract the specified number of least-significant bits of a specific
> + * color component from a standard 64-bit ARGB value.

Why would you ever want the least significant bits?

> + */
> +#define DRM_ARGB64_COMP(c, shift, numlsb) \
> +	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
> +#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
> +#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
> +#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
> +#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
> +
> +/*
> + * Convenience wrappers to extract all 16 bits of a specific color
> + * component from a standard 64-bit ARGB value.
> + */
> +#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
> +#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
> +#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
> +#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
> +
>  #if defined(__cplusplus)
>  }
>  #endif
> 
> -- 
> 2.51.0

-- 
Ville Syrjälä
Intel

Re: [PATCH 1/2] drm: Add CRTC background color property

[Ville Syrjälä]

On Tue, Sep 02, 2025 at 12:27:56PM +0300, Cristian Ciocaltea wrote:
> Some display controllers can be hardware programmed to show non-black
> colors for pixels that are either not covered by any plane or are
> exposed through transparent regions of higher planes.  This feature can
> help reduce memory bandwidth usage, e.g. in compositors managing a UI
> with a solid background color while using smaller planes to render the
> remaining content.
> 
> To support this capability, introduce the BACKGROUND_COLOR standard DRM
> mode property, which can be attached to a CRTC through the
> drm_crtc_attach_background_color_property() helper function.
> 
> Additionally, define a 64-bit ARGB format value to be built with the
> help of a dedicated drm_argb64() utility macro.  Individual color
> components can be extracted with desired precision using the
> corresponding DRM_ARGB64_*() macros.
> 
> Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
>  drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
>  drivers/gpu/drm/drm_mode_config.c         |  6 +++++
>  include/drm/drm_blend.h                   |  4 +++-
>  include/drm/drm_crtc.h                    | 12 ++++++++++
>  include/drm/drm_mode_config.h             |  5 +++++
>  include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
>  8 files changed, 94 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 7142e163e618ea0d7d9d828e1bd9ff2a6ec0dfeb..359264cf467c5270b77f0b04548073bc92cb812e 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -75,6 +75,7 @@ __drm_atomic_helper_crtc_state_reset(struct drm_crtc_state *crtc_state,
>  				     struct drm_crtc *crtc)
>  {
>  	crtc_state->crtc = crtc;
> +	crtc_state->background_color = drm_argb64(0xffff, 0, 0, 0);
>  }
>  EXPORT_SYMBOL(__drm_atomic_helper_crtc_state_reset);
>  
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index 85dbdaa4a2e25878c953b9b41539c8566d55c6d9..a447cb119aaa6cd11348be77b39f342a1386836d 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -407,6 +407,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>  					&replaced);
>  		state->color_mgmt_changed |= replaced;
>  		return ret;
> +	} else if (property == config->background_color_property) {
> +		state->background_color = val;
>  	} else if (property == config->prop_out_fence_ptr) {
>  		s32 __user *fence_ptr = u64_to_user_ptr(val);
>  
> @@ -452,6 +454,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>  		*val = (state->ctm) ? state->ctm->base.id : 0;
>  	else if (property == config->gamma_lut_property)
>  		*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
> +	else if (property == config->background_color_property)
> +		*val = state->background_color;
>  	else if (property == config->prop_out_fence_ptr)
>  		*val = 0;
>  	else if (property == crtc->scaling_filter_property)
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index 6852d73c931ce32e62062e2b8f8c5e38612d5210..5a287d12685b007a2732f510f62675f500e53727 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -191,10 +191,6 @@
>   *		 plane does not expose the "alpha" property, then this is
>   *		 assumed to be 1.0
>   *
> - * Note that all the property extensions described here apply either to the
> - * plane or the CRTC (e.g. for the background color, which currently is not
> - * exposed and assumed to be black).
> - *
>   * SCALING_FILTER:
>   *     Indicates scaling filter to be used for plane scaler
>   *
> @@ -207,6 +203,23 @@
>   *
>   * Drivers can set up this property for a plane by calling
>   * drm_plane_create_scaling_filter_property
> + *
> + * The property extensions described above all apply to the plane.  Drivers
> + * may also expose the following crtc property extension:
> + *
> + * BACKGROUND_COLOR:
> + *	Background color is set via drm_crtc_attach_background_color_property().
> + *	It controls the ARGB color of a full-screen layer that exists below all
> + *	planes.  This color will be used for pixels not covered by any plane and
> + *	may also be blended with plane contents as allowed by a plane's alpha
> + *	values.  The background color defaults to black, and is assumed to be
> + *	black for drivers that do not expose this property.  Although background
> + *	color isn't a plane, it is assumed that the color provided here
> + *	undergoes the same pipe-level degamma/CSC/gamma transformations that
> + *	planes undergo.  Note that the color value provided here includes an
> + *	alpha channel, hence non-opaque background color values are allowed, but
> + *	are generally only honored in special cases (e.g. when a memory
> + *	writeback connector is in use).
>   */
>  
>  /**
> @@ -621,3 +634,19 @@ int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>  	return 0;
>  }
>  EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
> +
> +/**
> + * drm_crtc_attach_background_color_property - attach background color property
> + * @crtc: drm crtc
> + *
> + * Attaches the background color property to @crtc.  The property defaults to
> + * solid black and will accept 64-bit ARGB values in the format generated by
> + * drm_argb64().
> + */
> +void drm_crtc_attach_background_color_property(struct drm_crtc *crtc)
> +{
> +	drm_object_attach_property(&crtc->base,
> +				   crtc->dev->mode_config.background_color_property,
> +				   drm_argb64(0xffff, 0, 0, 0));
> +}
> +EXPORT_SYMBOL(drm_crtc_attach_background_color_property);
> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
> index 25f376869b3a41d47bbe72b0df3e35cad142f3e6..6d70bfab45ca2bb81ed3ca1940fd1cd85e8cc58e 100644
> --- a/drivers/gpu/drm/drm_mode_config.c
> +++ b/drivers/gpu/drm/drm_mode_config.c
> @@ -375,6 +375,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.gamma_lut_size_property = prop;
>  
> +	prop = drm_property_create_range(dev, 0,
> +					 "BACKGROUND_COLOR", 0, U64_MAX);
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.background_color_property = prop;
> +
>  	prop = drm_property_create(dev,
>  				   DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
>  				   "IN_FORMATS", 0);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 88bdfec3bd8848acd1ef5742aaaa23483b332a2e..c7e888767c81c2745cd3cce88c10db4bbe305d1e 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -31,8 +31,9 @@
>  #define DRM_MODE_BLEND_COVERAGE		1
>  #define DRM_MODE_BLEND_PIXEL_NONE	2
>  
> -struct drm_device;
>  struct drm_atomic_state;
> +struct drm_crtc;
> +struct drm_device;
>  struct drm_plane;
>  
>  static inline bool drm_rotation_90_or_270(unsigned int rotation)
> @@ -58,4 +59,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
>  			      struct drm_atomic_state *state);
>  int drm_plane_create_blend_mode_property(struct drm_plane *plane,
>  					 unsigned int supported_modes);
> +void drm_crtc_attach_background_color_property(struct drm_crtc *crtc);
>  #endif
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index caa56e039da2a748cf40ebf45b37158acda439d9..4653dacc1077b9ed8fb4cf27cc84530ba1706f6a 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -274,6 +274,18 @@ struct drm_crtc_state {
>  	 */
>  	struct drm_property_blob *gamma_lut;
>  
> +	/**
> +	 * @background_color:
> +	 *
> +	 * RGB value representing the pipe's background color.  The background
> +	 * color (aka "canvas color") of a pipe is the color that will be used
> +	 * for pixels not covered by a plane, or covered by transparent pixels
> +	 * of a plane.  The value here should be built using drm_argb64(), while
> +	 * the individual color components can be extracted with desired
> +	 * precision via the DRM_ARGB64_*() macros.
> +	 */
> +	u64 background_color;
> +
>  	/**
>  	 * @target_vblank:
>  	 *
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 2e848b816218584eb077ed887bf97705f012a622..ea422afec5c4108a223dc872e1b6835ffc596cc3 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -814,6 +814,11 @@ struct drm_mode_config {
>  	 * gamma LUT as supported by the driver (read-only).
>  	 */
>  	struct drm_property *gamma_lut_size_property;
> +	/**
> +	 * @background_color_property: Optional CRTC property to set the
> +	 * background color.
> +	 */
> +	struct drm_property *background_color_property;
>  
>  	/**
>  	 * @suggested_x_property: Optional connector property with a hint for
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index a122bea2559387576150236e3a88f99c24ad3138..4bd6a8ca8868109bcbe21f9f6e9864519c9d03ec 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -1363,6 +1363,36 @@ struct drm_mode_closefb {
>  	__u32 pad;
>  };
>  
> +/*
> + * Put 16-bit ARGB values into a standard 64-bit representation that
> + * can be used for ioctl parameters, inter-driver communication, etc.
> + */
> +static inline __u64
> +drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
> +{
> +	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
> +}
> +
> +/*
> + * Extract the specified number of least-significant bits of a specific
> + * color component from a standard 64-bit ARGB value.

Why would you ever want the least significant bits?

> + */
> +#define DRM_ARGB64_COMP(c, shift, numlsb) \
> +	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
> +#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
> +#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
> +#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
> +#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
> +
> +/*
> + * Convenience wrappers to extract all 16 bits of a specific color
> + * component from a standard 64-bit ARGB value.
> + */
> +#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
> +#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
> +#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
> +#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
> +
>  #if defined(__cplusplus)
>  }
>  #endif
> 
> -- 
> 2.51.0

-- 
Ville Syrjälä
Intel

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 1/2] drm: Add CRTC background color property

[Cristian Ciocaltea]

On 9/2/25 4:36 PM, Ville Syrjälä wrote:
> On Tue, Sep 02, 2025 at 12:27:56PM +0300, Cristian Ciocaltea wrote:
>> Some display controllers can be hardware programmed to show non-black
>> colors for pixels that are either not covered by any plane or are
>> exposed through transparent regions of higher planes.  This feature can
>> help reduce memory bandwidth usage, e.g. in compositors managing a UI
>> with a solid background color while using smaller planes to render the
>> remaining content.
>>
>> To support this capability, introduce the BACKGROUND_COLOR standard DRM
>> mode property, which can be attached to a CRTC through the
>> drm_crtc_attach_background_color_property() helper function.
>>
>> Additionally, define a 64-bit ARGB format value to be built with the
>> help of a dedicated drm_argb64() utility macro.  Individual color
>> components can be extracted with desired precision using the
>> corresponding DRM_ARGB64_*() macros.
>>
>> Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
>>  drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
>>  drivers/gpu/drm/drm_mode_config.c         |  6 +++++
>>  include/drm/drm_blend.h                   |  4 +++-
>>  include/drm/drm_crtc.h                    | 12 ++++++++++
>>  include/drm/drm_mode_config.h             |  5 +++++
>>  include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
>>  8 files changed, 94 insertions(+), 5 deletions(-)

[...]

>> +/*
>> + * Put 16-bit ARGB values into a standard 64-bit representation that
>> + * can be used for ioctl parameters, inter-driver communication, etc.
>> + */
>> +static inline __u64
>> +drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
>> +{
>> +	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
>> +}
>> +
>> +/*
>> + * Extract the specified number of least-significant bits of a specific
>> + * color component from a standard 64-bit ARGB value.
> 
> Why would you ever want the least significant bits?

Right, that's useless - will replace with proper helpers dealing with custom
precision.

Thanks,
Cristian

>> + */
>> +#define DRM_ARGB64_COMP(c, shift, numlsb) \
>> +	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
>> +#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
>> +#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
>> +#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
>> +#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
>> +
>> +/*
>> + * Convenience wrappers to extract all 16 bits of a specific color
>> + * component from a standard 64-bit ARGB value.
>> + */
>> +#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
>> +#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
>> +#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
>> +#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
>> +
>>  #if defined(__cplusplus)
>>  }
>>  #endif
>>
>> -- 
>> 2.51.0
> 

Re: [PATCH 1/2] drm: Add CRTC background color property

[Cristian Ciocaltea]

On 9/2/25 4:36 PM, Ville Syrjälä wrote:
> On Tue, Sep 02, 2025 at 12:27:56PM +0300, Cristian Ciocaltea wrote:
>> Some display controllers can be hardware programmed to show non-black
>> colors for pixels that are either not covered by any plane or are
>> exposed through transparent regions of higher planes.  This feature can
>> help reduce memory bandwidth usage, e.g. in compositors managing a UI
>> with a solid background color while using smaller planes to render the
>> remaining content.
>>
>> To support this capability, introduce the BACKGROUND_COLOR standard DRM
>> mode property, which can be attached to a CRTC through the
>> drm_crtc_attach_background_color_property() helper function.
>>
>> Additionally, define a 64-bit ARGB format value to be built with the
>> help of a dedicated drm_argb64() utility macro.  Individual color
>> components can be extracted with desired precision using the
>> corresponding DRM_ARGB64_*() macros.
>>
>> Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>  drivers/gpu/drm/drm_atomic_state_helper.c |  1 +
>>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++++
>>  drivers/gpu/drm/drm_blend.c               | 37 +++++++++++++++++++++++++++----
>>  drivers/gpu/drm/drm_mode_config.c         |  6 +++++
>>  include/drm/drm_blend.h                   |  4 +++-
>>  include/drm/drm_crtc.h                    | 12 ++++++++++
>>  include/drm/drm_mode_config.h             |  5 +++++
>>  include/uapi/drm/drm_mode.h               | 30 +++++++++++++++++++++++++
>>  8 files changed, 94 insertions(+), 5 deletions(-)

[...]

>> +/*
>> + * Put 16-bit ARGB values into a standard 64-bit representation that
>> + * can be used for ioctl parameters, inter-driver communication, etc.
>> + */
>> +static inline __u64
>> +drm_argb64(__u16 alpha, __u16 red, __u16 green, __u16 blue)
>> +{
>> +	return (__u64)alpha << 48 | (__u64)red << 32 | (__u64)green << 16 | blue;
>> +}
>> +
>> +/*
>> + * Extract the specified number of least-significant bits of a specific
>> + * color component from a standard 64-bit ARGB value.
> 
> Why would you ever want the least significant bits?

Right, that's useless - will replace with proper helpers dealing with custom
precision.

Thanks,
Cristian

>> + */
>> +#define DRM_ARGB64_COMP(c, shift, numlsb) \
>> +	((__u16)(((c) >> (shift)) & ((1UL << (numlsb) % 17) - 1)))
>> +#define DRM_ARGB64_ALPHA_LSB(c, numlsb) DRM_ARGB64_COMP(c, 48, numlsb)
>> +#define DRM_ARGB64_RED_LSB(c, numlsb)   DRM_ARGB64_COMP(c, 32, numlsb)
>> +#define DRM_ARGB64_GREEN_LSB(c, numlsb) DRM_ARGB64_COMP(c, 16, numlsb)
>> +#define DRM_ARGB64_BLUE_LSB(c, numlsb)  DRM_ARGB64_COMP(c, 0, numlsb)
>> +
>> +/*
>> + * Convenience wrappers to extract all 16 bits of a specific color
>> + * component from a standard 64-bit ARGB value.
>> + */
>> +#define DRM_ARGB64_ALPHA(c)		DRM_ARGB64_ALPHA_LSB(c, 16)
>> +#define DRM_ARGB64_RED(c)		DRM_ARGB64_RED_LSB(c, 16)
>> +#define DRM_ARGB64_GREEN(c)		DRM_ARGB64_GREEN_LSB(c, 16)
>> +#define DRM_ARGB64_BLUE(c)		DRM_ARGB64_BLUE_LSB(c, 16)
>> +
>>  #if defined(__cplusplus)
>>  }
>>  #endif
>>
>> -- 
>> 2.51.0
> 


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip