diff for duplicates of <20181012093523.GA29014@imagebutcher> diff --git a/a/1.txt b/N1/1.txt index 29312e8..82cb1dc 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,13 +1,13 @@ Hi, -> >> ?+/ { -> >> ?+ model = "Emlid Neutis N5 Developer board"; -> >> ?+ compatible = "emlid,emlid-neutis-n5-devboard", -> >> ?+ "emlid,emlid-neutis-n5", +> >> +/ { +> >> + model = "Emlid Neutis N5 Developer board"; +> >> + compatible = "emlid,emlid-neutis-n5-devboard", +> >> + "emlid,emlid-neutis-n5", > >> > >> Do you need the two emlid there? What comes before the comma is the > >> vendor, while what is after is the model. -> > ? +> > > > I think emlid-neutis-n5 module could be useful in the future, no need > > this now. > @@ -17,11 +17,11 @@ Hi, Oh, I agree. No need to duplicate "emlid". Thank you! -> >> ?+&uart1 { -> >> ?+ pinctrl-names = "default"; -> >> ?+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; -> >> ?+ status = "okay"; -> >> ?+}; +> >> +&uart1 { +> >> + pinctrl-names = "default"; +> >> + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; +> >> + status = "okay"; +> >> +}; > >> > >> I guess this is for bluetooth? Have you tested serdev drivers? > >> diff --git a/a/content_digest b/N1/content_digest index c896191..d985610 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,22 +4,33 @@ "ref\020181010144957.exrlupoph7ovsmdw@flea\0" "ref\09398571539259289@myt4-929fb874f3f2.qloud-c.yandex.net\0" "ref\02d09d6c0-0404-589d-2c34-da846cff4fb8@suse.de\0" - "From\0aleksandr.aleksandrov@emlid.com (Aleksandr Aleksandrov)\0" - "Subject\0[PATCH v3] arm64: new board - Emlid Neutis N5\0" + "From\0Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>\0" + "Subject\0Re: [PATCH v3] arm64: new board - Emlid Neutis N5\0" "Date\0Fri, 12 Oct 2018 12:35:23 +0300\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Andreas F\303\244rber <afaerber@suse.de>\0" + "Cc\0Maxime Ripard <maxime.ripard@bootlin.com>" + Rob Herring <robh+dt@kernel.org> + Mark Rutland <mark.rutland@arm.com> + Chen-Yu Tsai <wens@csie.org> + David Lechner <david@lechnology.com> + Thierry Reding <treding@nvidia.com> + " Noralf Tr\303\270nnes <noralf@tronnes.org>" + Johan Hovold <johan@kernel.org> + devicetree@vger.kernel.org <devicetree@vger.kernel.org> + linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> + " linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>\0" "\00:1\0" "b\0" "Hi,\n" "\n" - "> >> ?+/ {\n" - "> >> ?+ model = \"Emlid Neutis N5 Developer board\";\n" - "> >> ?+ compatible = \"emlid,emlid-neutis-n5-devboard\",\n" - "> >> ?+ \"emlid,emlid-neutis-n5\",\n" + "> >> \302\240+/ {\n" + "> >> \302\240+ model = \"Emlid Neutis N5 Developer board\";\n" + "> >> \302\240+ compatible = \"emlid,emlid-neutis-n5-devboard\",\n" + "> >> \302\240+ \"emlid,emlid-neutis-n5\",\n" "> >>\n" "> >> Do you need the two emlid there? What comes before the comma is the\n" "> >> vendor, while what is after is the model.\n" - "> > ?\n" + "> > \302\240\n" "> > I think emlid-neutis-n5 module could be useful in the future, no need\n" "> > this now.\n" "> \n" @@ -29,11 +40,11 @@ "\n" "Oh, I agree. No need to duplicate \"emlid\". Thank you!\n" "\n" - "> >> ?+&uart1 {\n" - "> >> ?+ pinctrl-names = \"default\";\n" - "> >> ?+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;\n" - "> >> ?+ status = \"okay\";\n" - "> >> ?+};\n" + "> >> \302\240+&uart1 {\n" + "> >> \302\240+ pinctrl-names = \"default\";\n" + "> >> \302\240+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;\n" + "> >> \302\240+ status = \"okay\";\n" + "> >> \302\240+};\n" "> >>\n" "> >> I guess this is for bluetooth? Have you tested serdev drivers?\n" "> >>\n" @@ -51,4 +62,4 @@ "\n" Aleksandr -7b2206d111a18c96d6ca45f9bf4018fa3dd527b9864003bda0b15cbbec5ead0f +c051e31389f1cbabdce6d38552af63bc4065ceba57183969e2844fb8cde8ee42
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.