All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 08/11] drm/i915: reorganize the error message for invalid watermarks
Date: Thu, 18 Oct 2018 16:55:52 +0300	[thread overview]
Message-ID: <20181018135552.GC9144@intel.com> (raw)
In-Reply-To: <20181016220133.26991-9-paulo.r.zanoni@intel.com>

On Tue, Oct 16, 2018 at 03:01:30PM -0700, Paulo Zanoni wrote:
> Print a more generic "failed to compute watermark levels" whenever any
> of skl_compute_wm_levels() fail, and print only the specific error
> message for the specific cases. This allows us to stop passing pstate
> everywhere, making the watermarks computation code a little less
> dependent on random intel state structs.

Nothing random about those structs. They are *the* state.
Using them directly rather than duplicating informationa in the
wm_params struct would probably make the code look a bit less alien.

But given that the information is duplicated I guess we don't have to
pass in the plane state. So the patch seems fine in that sense.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> 
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 27 ++++++++++++---------------
>  1 file changed, 12 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 4053f4a68657..1290efc64869 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4635,13 +4635,11 @@ skl_compute_plane_wm_params(const struct drm_i915_private *dev_priv,
>  
>  static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
>  				struct intel_crtc_state *cstate,
> -				const struct intel_plane_state *intel_pstate,
>  				int level,
>  				const struct skl_wm_params *wp,
>  				const struct skl_wm_level *result_prev,
>  				struct skl_wm_level *result /* out */)
>  {
> -	const struct drm_plane_state *pstate = &intel_pstate->base;
>  	uint32_t latency = dev_priv->wm.skl_latency[level];
>  	uint_fixed_16_16_t method1, method2;
>  	uint_fixed_16_16_t selected_result;
> @@ -4763,11 +4761,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
>  		if (level) {
>  			return 0;
>  		} else {
> -			struct drm_plane *plane = pstate->plane;
> -
> -			DRM_DEBUG_KMS("Requested display configuration exceeds system watermark limitations\n");
> -			DRM_DEBUG_KMS("[PLANE:%d:%s] blocks required = %u/%u, lines required = %u/31\n",
> -				      plane->base.id, plane->name,
> +			DRM_DEBUG_KMS("Requested display configuration exceeds system watermark limitations: blocks required = %u/%u, lines required = %u/31\n",
>  				      res_blocks, wp->ddb_blocks, res_lines);
>  			return -EINVAL;
>  		}
> @@ -4795,7 +4789,6 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
>  static int
>  skl_compute_wm_levels(const struct drm_i915_private *dev_priv,
>  		      struct intel_crtc_state *cstate,
> -		      const struct intel_plane_state *intel_pstate,
>  		      const struct skl_wm_params *wm_params,
>  		      struct skl_plane_wm *wm,
>  		      int plane_id)
> @@ -4816,7 +4809,6 @@ skl_compute_wm_levels(const struct drm_i915_private *dev_priv,
>  
>  		ret = skl_compute_plane_wm(dev_priv,
>  					   cstate,
> -					   intel_pstate,
>  					   level,
>  					   wm_params,
>  					   result_prev,
> @@ -4951,10 +4943,13 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
>  		if (!wm_params.plane_visible)
>  			continue;
>  
> -		ret = skl_compute_wm_levels(dev_priv, cstate,
> -					    intel_pstate, &wm_params, wm, 0);
> -		if (ret)
> +		ret = skl_compute_wm_levels(dev_priv, cstate, &wm_params, wm,
> +					    0);
> +		if (ret) {
> +			DRM_DEBUG_KMS("[PLANE:%d:%s] failed to compute watermark levels\n",
> +				      plane->base.id, plane->name);
>  			return ret;
> +		}
>  
>  		skl_compute_transition_wm(cstate, &wm_params, &wm->wm[0],
>  					  &wm->trans_wm);
> @@ -4968,10 +4963,12 @@ static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
>  				return ret;
>  
>  			ret = skl_compute_wm_levels(dev_priv, cstate,
> -						    intel_pstate, &wm_params,
> -						    wm, 1);
> -			if (ret)
> +						    &wm_params, wm, 1);
> +			if (ret) {
> +				DRM_DEBUG_KMS("[PLANE:%d:%s] failed to compute planar watermark levels\n",
> +					      plane->base.id, plane->name);
>  				return ret;
> +			}
>  		}
>  	}
>  
> -- 
> 2.14.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-10-18 13:57 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-16 22:01 [PATCH 00/11] More watermarks improvements Paulo Zanoni
2018-10-16 22:01 ` [PATCH 01/11] drm/i915: don't apply Display WAs 1125 and 1126 to GLK/CNL+ Paulo Zanoni
2018-10-18 13:14   ` Ville Syrjälä
2018-10-22 23:32     ` Paulo Zanoni
2018-10-22 23:55       ` Rodrigo Vivi
2018-10-23  0:12         ` Paulo Zanoni
2018-10-23  0:18           ` Rodrigo Vivi
2018-10-23  7:30             ` Jani Nikula
2018-10-26  0:43               ` Rodrigo Vivi
2018-11-09  0:50       ` [PATCH] " Paulo Zanoni
2018-10-16 22:01 ` [PATCH 02/11] drm/i915: remove padding from struct skl_wm_level Paulo Zanoni
2018-10-16 23:00   ` Lucas De Marchi
2018-10-16 22:01 ` [PATCH 03/11] drm/i915: fix handling of invisible planes in watermarks code Paulo Zanoni
2018-10-18 13:28   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 04/11] drm/i915: remove useless memset() for watermarks parameters Paulo Zanoni
2018-10-18 13:31   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 05/11] drm/i915: simplify wm->is_planar assignment Paulo Zanoni
2018-10-18 13:34   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 06/11] drm/i915: refactor skl_write_plane_wm() Paulo Zanoni
2018-10-18 13:36   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 07/11] drm/i915: move ddb_blocks to be a watermark parameter Paulo Zanoni
2018-10-18 13:41   ` Ville Syrjälä
2018-10-22 22:29     ` Paulo Zanoni
2018-10-23 12:07       ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 08/11] drm/i915: reorganize the error message for invalid watermarks Paulo Zanoni
2018-10-18 13:55   ` Ville Syrjälä [this message]
2018-10-18 16:18     ` Ville Syrjälä
2018-10-22 22:22     ` Paulo Zanoni
2018-10-23 12:02       ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 09/11] drm/i915: make skl_needs_memory_bw_wa() take dev_priv instead of state Paulo Zanoni
2018-10-18 14:02   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 10/11] drm/i915: add pipe_htotal to struct skl_wm_params Paulo Zanoni
2018-10-18 14:14   ` Ville Syrjälä
2018-10-16 22:01 ` [PATCH 11/11] drm/i915: pass dev_priv instead of cstate to skl_compute_transition_wm() Paulo Zanoni
2018-10-18 14:20   ` Ville Syrjälä
2018-10-16 22:21 ` ✗ Fi.CI.CHECKPATCH: warning for More watermarks improvements Patchwork
2018-10-16 22:31   ` Paulo Zanoni
2018-10-16 22:25 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-16 22:39 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-16 22:52   ` Paulo Zanoni
2018-10-18 14:34     ` Saarinen, Jani
2018-10-23  0:09 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-23  1:41 ` ✓ Fi.CI.IGT: " Patchwork
2018-11-09  1:28 ` ✗ Fi.CI.BAT: failure for More watermarks improvements (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181018135552.GC9144@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.