All of lore.kernel.org
 help / color / mirror / Atom feed
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] ARM: dts: imx6sx-sdb: Add flexcan support
Date: Sun, 4 Nov 2018 15:27:38 +0800	[thread overview]
Message-ID: <20181104072734.GA26016@tiger> (raw)
In-Reply-To: <20181020023318.21663-1-qiangqing.zhang@nxp.com>

On Sat, Oct 20, 2018 at 02:35:36AM +0000, Joakim Zhang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
> 
> CAN transceiver is different on RevA and RevB board.
> It's active high on RevA while active low on Rev B.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++
>  arch/arm/boot/dts/imx6sx-sdb.dts      |  5 ++++
>  arch/arm/boot/dts/imx6sx-sdb.dtsi     | 42 +++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> index 9cc6ff206aea..d98dcf00b9c4 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -10,6 +10,18 @@
>  
>  / {
>  	model = "Freescale i.MX6 SoloX SDB RevA Board";
> +
> +	/* Transceiver EN/STBY is active high on RevA board */
> +	reg_can_en: regulator-can-en {
> +		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};

Please use label node to make it easier for both yourself and readers.

&reg_can_en {
	...
};

Shawn

> +
> +	reg_can_stby: regulator-can-stby {
> +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		vin-supply = <&reg_can_en>;
> +	};
>  };
>  
>  &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index 6dd9bebfe027..092b8de142a8 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -10,6 +10,11 @@
>  
>  / {
>  	model = "Freescale i.MX6 SoloX SDB RevB Board";
> +
> +	/* Transceiver EN/STBY is active low on RevB board */
> +	reg_can_stby: regulator-can-stby {
> +		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
> +	};
>  };
>  
>  &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> index f8f31872fa14..e37ec4b396a2 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -136,6 +136,20 @@
>  		regulator-max-microvolt = <5000000>;
>  	};
>  
> +	reg_can_en: regulator-can-en {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-en";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_can_stby: regulator-can-stby {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-stby";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
>  	sound {
>  		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
>  		model = "wm8962-audio";
> @@ -202,6 +216,20 @@
>  	status = "okay";
>  };
>  
> +&flexcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "okay";
> +};
> +
> +&flexcan2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "okay";
> +};
> +
>  &i2c3 {
>  	clock-frequency = <100000>;
>  	pinctrl-names = "default";
> @@ -397,6 +425,20 @@
>  			>;
>  		};
>  
> +		pinctrl_flexcan1: flexcan1grp {
> +			fsl,pins = <
> +				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
> +				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
> +			>;
> +		};
> +
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
> +				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
> +			>;
> +		};
> +
>  		pinctrl_gpio_keys: gpio_keysgrp {
>  			fsl,pins = <
>  				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: "s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"A.s. Dong" <aisheng.dong@nxp.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 1/1] ARM: dts: imx6sx-sdb: Add flexcan support
Date: Sun, 4 Nov 2018 15:27:38 +0800	[thread overview]
Message-ID: <20181104072734.GA26016@tiger> (raw)
In-Reply-To: <20181020023318.21663-1-qiangqing.zhang@nxp.com>

On Sat, Oct 20, 2018 at 02:35:36AM +0000, Joakim Zhang wrote:
> From: Dong Aisheng <aisheng.dong@nxp.com>
> 
> CAN transceiver is different on RevA and RevB board.
> It's active high on RevA while active low on Rev B.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  arch/arm/boot/dts/imx6sx-sdb-reva.dts | 12 ++++++++
>  arch/arm/boot/dts/imx6sx-sdb.dts      |  5 ++++
>  arch/arm/boot/dts/imx6sx-sdb.dtsi     | 42 +++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> index 9cc6ff206aea..d98dcf00b9c4 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -10,6 +10,18 @@
>  
>  / {
>  	model = "Freescale i.MX6 SoloX SDB RevA Board";
> +
> +	/* Transceiver EN/STBY is active high on RevA board */
> +	reg_can_en: regulator-can-en {
> +		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};

Please use label node to make it easier for both yourself and readers.

&reg_can_en {
	...
};

Shawn

> +
> +	reg_can_stby: regulator-can-stby {
> +		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		vin-supply = <&reg_can_en>;
> +	};
>  };
>  
>  &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index 6dd9bebfe027..092b8de142a8 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -10,6 +10,11 @@
>  
>  / {
>  	model = "Freescale i.MX6 SoloX SDB RevB Board";
> +
> +	/* Transceiver EN/STBY is active low on RevB board */
> +	reg_can_stby: regulator-can-stby {
> +		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
> +	};
>  };
>  
>  &i2c1 {
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> index f8f31872fa14..e37ec4b396a2 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
> @@ -136,6 +136,20 @@
>  		regulator-max-microvolt = <5000000>;
>  	};
>  
> +	reg_can_en: regulator-can-en {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-en";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	reg_can_stby: regulator-can-stby {
> +		compatible = "regulator-fixed";
> +		regulator-name = "can-stby";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
>  	sound {
>  		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
>  		model = "wm8962-audio";
> @@ -202,6 +216,20 @@
>  	status = "okay";
>  };
>  
> +&flexcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "okay";
> +};
> +
> +&flexcan2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_can_stby>;
> +	status = "okay";
> +};
> +
>  &i2c3 {
>  	clock-frequency = <100000>;
>  	pinctrl-names = "default";
> @@ -397,6 +425,20 @@
>  			>;
>  		};
>  
> +		pinctrl_flexcan1: flexcan1grp {
> +			fsl,pins = <
> +				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
> +				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
> +			>;
> +		};
> +
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
> +				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
> +			>;
> +		};
> +
>  		pinctrl_gpio_keys: gpio_keysgrp {
>  			fsl,pins = <
>  				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2018-11-04  7:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-20  2:35 [PATCH v2 1/1] ARM: dts: imx6sx-sdb: Add flexcan support Joakim Zhang
2018-10-20  2:35 ` Joakim Zhang
2018-11-04  7:27 ` Shawn Guo [this message]
2018-11-04  7:27   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181104072734.GA26016@tiger \
    --to=shawnguo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.