From: Shawn Guo <shawnguo@kernel.org>
To: Pankaj Bansal <pankaj.bansal@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Oliver Hartkopp <socketcan@hartkopp.net>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Leo Li <leoyang.li@nxp.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] arm64: dts: Add flexcan nodes in LX2160A
Date: Sun, 4 Nov 2018 16:34:37 +0800 [thread overview]
Message-ID: <20181104083435.GE26016@tiger> (raw)
In-Reply-To: <20181024161509.14200-1-pankaj.bansal@nxp.com>
On Wed, Oct 24, 2018 at 10:49:20AM +0000, Pankaj Bansal wrote:
> The FlexCAN module in LX2160A is a communication controller implementing
> the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B
> protocol specifications.
>
> -Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes
> data length
> -Each mailbox configurable as receive or transmit, all supporting
> standard and extended messages
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> This patch depends on below patches:
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563
> [2] https://patchwork.kernel.org/patch/10645287/
>
> This patch is used by below patches:
> [1] https://www.spinics.net/lists/linux-can/msg00348.html
>
> .../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++
> 3 files changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22abbe725..8a0305a2b778 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f20e69..f8c95fc6de27 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 56f846c55812..23ea8776b55a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -566,6 +566,24 @@
> status = "disabled";
> };
>
> + can0: can@2180000 {
> + compatible = "fsl,lx2160ar1-flexcan";
Is the compatible documented somewhere?
Shawn
> + reg = <0x0 0x2180000 0x0 0x10000>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + can1: can@2190000 {
> + compatible = "fsl,lx2160ar1-flexcan";
> + reg = <0x0 0x2190000 0x0 0x10000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> uart0: serial@21c0000 {
> compatible = "arm,sbsa-uart","arm,pl011";
> reg = <0x0 0x21c0000 0x0 0x1000>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: Add flexcan nodes in LX2160A
Date: Sun, 4 Nov 2018 16:34:37 +0800 [thread overview]
Message-ID: <20181104083435.GE26016@tiger> (raw)
In-Reply-To: <20181024161509.14200-1-pankaj.bansal@nxp.com>
On Wed, Oct 24, 2018 at 10:49:20AM +0000, Pankaj Bansal wrote:
> The FlexCAN module in LX2160A is a communication controller implementing
> the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B
> protocol specifications.
>
> -Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes
> data length
> -Each mailbox configurable as receive or transmit, all supporting
> standard and extended messages
>
> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
> ---
>
> Notes:
> This patch depends on below patches:
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563
> [2] https://patchwork.kernel.org/patch/10645287/
>
> This patch is used by below patches:
> [1] https://www.spinics.net/lists/linux-can/msg00348.html
>
> .../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++
> .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++
> 3 files changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22abbe725..8a0305a2b778 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f20e69..f8c95fc6de27 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -31,6 +31,14 @@
> };
> };
>
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> &crypto {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 56f846c55812..23ea8776b55a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -566,6 +566,24 @@
> status = "disabled";
> };
>
> + can0: can at 2180000 {
> + compatible = "fsl,lx2160ar1-flexcan";
Is the compatible documented somewhere?
Shawn
> + reg = <0x0 0x2180000 0x0 0x10000>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> + can1: can at 2190000 {
> + compatible = "fsl,lx2160ar1-flexcan";
> + reg = <0x0 0x2190000 0x0 0x10000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 7>, <&clockgen 4 7>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> +
> uart0: serial at 21c0000 {
> compatible = "arm,sbsa-uart","arm,pl011";
> reg = <0x0 0x21c0000 0x0 0x1000>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-11-04 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-24 10:49 [PATCH] arm64: dts: Add flexcan nodes in LX2160A Pankaj Bansal
2018-10-24 10:49 ` Pankaj Bansal
2018-11-04 8:34 ` Shawn Guo [this message]
2018-11-04 8:34 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181104083435.GE26016@tiger \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mkl@pengutronix.de \
--cc=pankaj.bansal@nxp.com \
--cc=robh+dt@kernel.org \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.