From: Moritz Fischer <mdf@kernel.org>
To: richard.gong@linux.intel.com
Cc: gregkh@linuxfoundation.org, catalin.marinas@arm.com,
will.deacon@arm.com, dinguyen@kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, atull@kernel.org, mdf@kernel.org,
arnd@arndb.de, corbet@lwn.net,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-fpga@vger.kernel.org, linux-doc@vger.kernel.org,
todd.riffel@intel.com, richard.gong@intel.com
Subject: Re: [PATCHv10 4/8] dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
Date: Tue, 6 Nov 2018 11:07:47 -0800 [thread overview]
Message-ID: <20181106190747.GA5690@archbook> (raw)
In-Reply-To: <1541523172-5171-5-git-send-email-richard.gong@linux.intel.com>
Hi Richard,
On Tue, Nov 06, 2018 at 10:52:48AM -0600, richard.gong@linux.intel.com wrote:
> From: Alan Tull <atull@kernel.org>
>
> Add a Device Tree binding for the Intel Stratix10 SoC FPGA manager.
>
> Signed-off-by: Alan Tull <atull@kernel.org>
> Signed-off-by: Richard Gong <richard.gong@intel.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
> ---
> v2: this patch is added in patch set version 2
> v3: change to put fpga_mgr node under firmware/svc node
> v4: s/fpga-mgr@0/fpga-mgr/ to remove unit_address
> add Richard's signed-off-by
> v5: add Reviewed-by Rob Herring
> v6: no change
> v7: no change
> v8: no change
> v9: no change
> v10: no change
> ---
> .../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> new file mode 100644
> index 0000000..6e03f79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> @@ -0,0 +1,17 @@
> +Intel Stratix10 SoC FPGA Manager
> +
> +Required properties:
> +The fpga_mgr node has the following mandatory property, must be located under
> +firmware/svc node.
> +
> +- compatible : should contain "intel,stratix10-soc-fpga-mgr"
> +
> +Example:
> +
> + firmware {
> + svc {
> + fpga_mgr: fpga-mgr {
> + compatible = "intel,stratix10-soc-fpga-mgr";
> + };
> + };
> + };
> --
> 2.7.4
>
Thanks,
Moritz
WARNING: multiple messages have this Message-ID (diff)
From: mdf@kernel.org (Moritz Fischer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv10 4/8] dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
Date: Tue, 6 Nov 2018 11:07:47 -0800 [thread overview]
Message-ID: <20181106190747.GA5690@archbook> (raw)
In-Reply-To: <1541523172-5171-5-git-send-email-richard.gong@linux.intel.com>
Hi Richard,
On Tue, Nov 06, 2018 at 10:52:48AM -0600, richard.gong at linux.intel.com wrote:
> From: Alan Tull <atull@kernel.org>
>
> Add a Device Tree binding for the Intel Stratix10 SoC FPGA manager.
>
> Signed-off-by: Alan Tull <atull@kernel.org>
> Signed-off-by: Richard Gong <richard.gong@intel.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
> ---
> v2: this patch is added in patch set version 2
> v3: change to put fpga_mgr node under firmware/svc node
> v4: s/fpga-mgr at 0/fpga-mgr/ to remove unit_address
> add Richard's signed-off-by
> v5: add Reviewed-by Rob Herring
> v6: no change
> v7: no change
> v8: no change
> v9: no change
> v10: no change
> ---
> .../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> new file mode 100644
> index 0000000..6e03f79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
> @@ -0,0 +1,17 @@
> +Intel Stratix10 SoC FPGA Manager
> +
> +Required properties:
> +The fpga_mgr node has the following mandatory property, must be located under
> +firmware/svc node.
> +
> +- compatible : should contain "intel,stratix10-soc-fpga-mgr"
> +
> +Example:
> +
> + firmware {
> + svc {
> + fpga_mgr: fpga-mgr {
> + compatible = "intel,stratix10-soc-fpga-mgr";
> + };
> + };
> + };
> --
> 2.7.4
>
Thanks,
Moritz
next prev parent reply other threads:[~2018-11-06 19:07 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-06 16:52 [PATCHv10 0/8] Add Intel Stratix10 FPGA manager and service layer richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 1/8] dt-bindings, firmware: add Intel Stratix10 service layer binding richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 2/8] arm64: dts: stratix10: add stratix10 service driver binding to base dtsi richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 3/8] firmware: add Intel Stratix10 service layer driver richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 17:03 ` Randy Dunlap
2018-11-06 17:03 ` Randy Dunlap
2018-11-07 20:47 ` Richard Gong
2018-11-07 20:47 ` Richard Gong
2018-11-06 16:52 ` [PATCHv10 4/8] dt-bindings: fpga: add Stratix10 SoC FPGA manager binding richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 19:07 ` Moritz Fischer [this message]
2018-11-06 19:07 ` Moritz Fischer
2018-11-06 16:52 ` [PATCHv10 5/8] arm64: dts: stratix10: add fpga manager and region richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 6/8] fpga: add intel stratix10 soc fpga manager driver richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 7/8] Documentation: driver-api: add stratix10 service layer richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 16:52 ` [PATCHv10 8/8] firmware: add remote status update client support richard.gong
2018-11-06 16:52 ` richard.gong at linux.intel.com
2018-11-06 17:22 ` Moritz Fischer
2018-11-06 17:22 ` Moritz Fischer
2018-11-07 20:49 ` Richard Gong
2018-11-07 20:49 ` Richard Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181106190747.GA5690@archbook \
--to=mdf@kernel.org \
--cc=arnd@arndb.de \
--cc=atull@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=richard.gong@intel.com \
--cc=richard.gong@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=todd.riffel@intel.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.