From: Craig Tatlor <ctatlor97@gmail.com>
Cc: ctatlor97@gmail.com, linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] pinctrl: sdm660: Set tile property for pingroups
Date: Mon, 12 Nov 2018 20:25:53 +0000 [thread overview]
Message-ID: <20181112202553.1410-1-ctatlor97@gmail.com> (raw)
This was missed when tiles support was added in a revison and
causes the driver to fail to load.
Fixes: 9cf0c526bc58 ("pinctrl: qcom: Add sdm660 pinctrl driver")
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
---
drivers/pinctrl/qcom/pinctrl-sdm660.c | 28 ++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c b/drivers/pinctrl/qcom/pinctrl-sdm660.c
index 6838b38555a1..1bfb0ae6b387 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm660.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c
@@ -33,7 +33,7 @@ enum {
}
-#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
{ \
.name = "gpio" #id, \
.pins = gpio##id##_pins, \
@@ -51,11 +51,12 @@ enum {
msm_mux_##f9 \
}, \
.nfuncs = 10, \
- .ctl_reg = base + REG_SIZE * id, \
- .io_reg = base + 0x4 + REG_SIZE * id, \
- .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \
- .intr_status_reg = base + 0xc + REG_SIZE * id, \
- .intr_target_reg = base + 0x8 + REG_SIZE * id, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
+ .intr_status_reg = 0xc + REG_SIZE * id, \
+ .intr_target_reg = 0x8 + REG_SIZE * id, \
+ .tile = _tile, \
.mux_bit = 2, \
.pull_bit = 0, \
.drv_bit = 6, \
@@ -82,6 +83,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
+ .tile = NORTH, \
.mux_bit = -1, \
.pull_bit = pull, \
.drv_bit = drv, \
@@ -1397,13 +1399,13 @@ static const struct msm_pingroup sdm660_groups[] = {
PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _),
PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _),
PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _),
- SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6),
- SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3),
- SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0),
- SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6),
- SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3),
- SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0),
- SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),
+ SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
+ SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
+ SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
+ SDC_QDSD_PINGROUP(sdc2_clk, 0x9b000, 14, 6),
+ SDC_QDSD_PINGROUP(sdc2_cmd, 0x9b000, 11, 3),
+ SDC_QDSD_PINGROUP(sdc2_data, 0x9b000, 9, 0),
+ SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
};
static const struct msm_pinctrl_soc_data sdm660_pinctrl = {
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: Craig Tatlor <ctatlor97@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: ctatlor97@gmail.com, linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] pinctrl: sdm660: Set tile property for pingroups
Date: Mon, 12 Nov 2018 20:25:53 +0000 [thread overview]
Message-ID: <20181112202553.1410-1-ctatlor97@gmail.com> (raw)
This was missed when tiles support was added in a revison and
causes the driver to fail to load.
Fixes: 9cf0c526bc58 ("pinctrl: qcom: Add sdm660 pinctrl driver")
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
---
drivers/pinctrl/qcom/pinctrl-sdm660.c | 28 ++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm660.c b/drivers/pinctrl/qcom/pinctrl-sdm660.c
index 6838b38555a1..1bfb0ae6b387 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm660.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm660.c
@@ -33,7 +33,7 @@ enum {
}
-#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
{ \
.name = "gpio" #id, \
.pins = gpio##id##_pins, \
@@ -51,11 +51,12 @@ enum {
msm_mux_##f9 \
}, \
.nfuncs = 10, \
- .ctl_reg = base + REG_SIZE * id, \
- .io_reg = base + 0x4 + REG_SIZE * id, \
- .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \
- .intr_status_reg = base + 0xc + REG_SIZE * id, \
- .intr_target_reg = base + 0x8 + REG_SIZE * id, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
+ .intr_status_reg = 0xc + REG_SIZE * id, \
+ .intr_target_reg = 0x8 + REG_SIZE * id, \
+ .tile = _tile, \
.mux_bit = 2, \
.pull_bit = 0, \
.drv_bit = 6, \
@@ -82,6 +83,7 @@ enum {
.intr_cfg_reg = 0, \
.intr_status_reg = 0, \
.intr_target_reg = 0, \
+ .tile = NORTH, \
.mux_bit = -1, \
.pull_bit = pull, \
.drv_bit = drv, \
@@ -1397,13 +1399,13 @@ static const struct msm_pingroup sdm660_groups[] = {
PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _),
PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _),
PINGROUP(113, SOUTH, _, _, _, _, _, _, _, _, _),
- SDC_QDSD_PINGROUP(sdc1_clk, 0x99a000, 13, 6),
- SDC_QDSD_PINGROUP(sdc1_cmd, 0x99a000, 11, 3),
- SDC_QDSD_PINGROUP(sdc1_data, 0x99a000, 9, 0),
- SDC_QDSD_PINGROUP(sdc2_clk, 0x99b000, 14, 6),
- SDC_QDSD_PINGROUP(sdc2_cmd, 0x99b000, 11, 3),
- SDC_QDSD_PINGROUP(sdc2_data, 0x99b000, 9, 0),
- SDC_QDSD_PINGROUP(sdc1_rclk, 0x99a000, 15, 0),
+ SDC_QDSD_PINGROUP(sdc1_clk, 0x9a000, 13, 6),
+ SDC_QDSD_PINGROUP(sdc1_cmd, 0x9a000, 11, 3),
+ SDC_QDSD_PINGROUP(sdc1_data, 0x9a000, 9, 0),
+ SDC_QDSD_PINGROUP(sdc2_clk, 0x9b000, 14, 6),
+ SDC_QDSD_PINGROUP(sdc2_cmd, 0x9b000, 11, 3),
+ SDC_QDSD_PINGROUP(sdc2_data, 0x9b000, 9, 0),
+ SDC_QDSD_PINGROUP(sdc1_rclk, 0x9a000, 15, 0),
};
static const struct msm_pinctrl_soc_data sdm660_pinctrl = {
--
2.19.1
next reply other threads:[~2018-11-12 20:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-12 20:25 Craig Tatlor [this message]
2018-11-12 20:25 ` [PATCH] pinctrl: sdm660: Set tile property for pingroups Craig Tatlor
2018-11-13 2:50 ` Bjorn Andersson
2018-11-17 12:25 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181112202553.1410-1-ctatlor97@gmail.com \
--to=ctatlor97@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.