PCIe support in APQ8098-based board

PCIe support in APQ8098-based board

[Marc Gonzalez]

Hello,

I'm playing with an APQ8098-based board, which I got to boot an upstream
v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
(IIUC apq8098 is the msm8998's "little brother", in that they are
almost the same SoC, with some HW blocks missing in the apq8098).

I'm trying to get PCIe working on my eval board. I'm wondering if
someone from qcom, codeaurora, or linaro has perhaps already done
this work, and it's just not upstream yet?

There seem to be proper drivers for the RC and the PHY, but some
low-level stuff are missing (clocks, regulator, power domain).

drivers/pci/controller/dwc/pcie-qcom.c
drivers/phy/qualcomm/phy-qcom-qmp.c

Regards.

PCIe support in APQ8098-based board

[Marc Gonzalez]

Hello,

I'm playing with an APQ8098-based board, which I got to boot an upstream
v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
(IIUC apq8098 is the msm8998's "little brother", in that they are
almost the same SoC, with some HW blocks missing in the apq8098).

I'm trying to get PCIe working on my eval board. I'm wondering if
someone from qcom, codeaurora, or linaro has perhaps already done
this work, and it's just not upstream yet?

There seem to be proper drivers for the RC and the PHY, but some
low-level stuff are missing (clocks, regulator, power domain).

drivers/pci/controller/dwc/pcie-qcom.c
drivers/phy/qualcomm/phy-qcom-qmp.c

Regards.

Re: PCIe support in APQ8098-based board

[Niklas Cassel]

On Sun, Nov 11, 2018 at 11:26:29PM +0100, Marc Gonzalez wrote:
> Hello,

Hello Marc

> 
> I'm playing with an APQ8098-based board, which I got to boot an upstream
> v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
> (IIUC apq8098 is the msm8998's "little brother", in that they are
> almost the same SoC, with some HW blocks missing in the apq8098).

That is correct.

> 
> I'm trying to get PCIe working on my eval board. I'm wondering if
> someone from qcom, codeaurora, or linaro has perhaps already done
> this work, and it's just not upstream yet?

Linaro will most likely look at this at some undefined time in the future.

Here are some hints in case you need this urgently:

msm8998 uses QCOM PCIe v2.3.3, which is supported by
drivers/pci/controller/dwc/pcie-qcom.c

I suggest that you look at:
arch/arm64/boot/dts/qcom/ipq8074.dtsi

However, note that the PCI ranges are different for this SoC compared to
ipq8074.

The correct ranges can be found here:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998.dtsi?h=msm-4.4#n2538

It also appears that drivers/clk/qcom/gcc-msm8998.c is missing some PCIe
resets.
The correct addresses for these clocks can be found here:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/clk/msm/clock-gcc-8998.c?h=msm-4.4

Note that the qcom_pcie_get_resources_2_3_3() will have to be modified
slightly for msm8998, since msm8998 only has 3 PCIe resets.


Kind regards,
Niklas

> 
> There seem to be proper drivers for the RC and the PHY, but some
> low-level stuff are missing (clocks, regulator, power domain).
> 
> drivers/pci/controller/dwc/pcie-qcom.c
> drivers/phy/qualcomm/phy-qcom-qmp.c
> 
> Regards.

PCIe support in APQ8098-based board

[Niklas Cassel]

On Sun, Nov 11, 2018 at 11:26:29PM +0100, Marc Gonzalez wrote:
> Hello,

Hello Marc

> 
> I'm playing with an APQ8098-based board, which I got to boot an upstream
> v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
> (IIUC apq8098 is the msm8998's "little brother", in that they are
> almost the same SoC, with some HW blocks missing in the apq8098).

That is correct.

> 
> I'm trying to get PCIe working on my eval board. I'm wondering if
> someone from qcom, codeaurora, or linaro has perhaps already done
> this work, and it's just not upstream yet?

Linaro will most likely look at this at some undefined time in the future.

Here are some hints in case you need this urgently:

msm8998 uses QCOM PCIe v2.3.3, which is supported by
drivers/pci/controller/dwc/pcie-qcom.c

I suggest that you look at:
arch/arm64/boot/dts/qcom/ipq8074.dtsi

However, note that the PCI ranges are different for this SoC compared to
ipq8074.

The correct ranges can be found here:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998.dtsi?h=msm-4.4#n2538

It also appears that drivers/clk/qcom/gcc-msm8998.c is missing some PCIe
resets.
The correct addresses for these clocks can be found here:
https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/clk/msm/clock-gcc-8998.c?h=msm-4.4

Note that the qcom_pcie_get_resources_2_3_3() will have to be modified
slightly for msm8998, since msm8998 only has 3 PCIe resets.


Kind regards,
Niklas

> 
> There seem to be proper drivers for the RC and the PHY, but some
> low-level stuff are missing (clocks, regulator, power domain).
> 
> drivers/pci/controller/dwc/pcie-qcom.c
> drivers/phy/qualcomm/phy-qcom-qmp.c
> 
> Regards.

Re: PCIe support in APQ8098-based board

[Marc Gonzalez]

On 12/11/2018 21:26, Niklas Cassel wrote:

> On Sun, Nov 11, 2018 at 11:26:29PM +0100, Marc Gonzalez wrote:
>> Hello,
> 
> Hello Marc
> 
>>
>> I'm playing with an APQ8098-based board, which I got to boot an upstream
>> v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
>> (IIUC apq8098 is the msm8998's "little brother", in that they are
>> almost the same SoC, with some HW blocks missing in the apq8098).
> 
> That is correct.
> 
>>
>> I'm trying to get PCIe working on my eval board. I'm wondering if
>> someone from qcom, codeaurora, or linaro has perhaps already done
>> this work, and it's just not upstream yet?
> 
> Linaro will most likely look at this at some undefined time in the future.
> 
> Here are some hints in case you need this urgently:
> 
> msm8998 uses QCOM PCIe v2.3.3, which is supported by
> drivers/pci/controller/dwc/pcie-qcom.c
> 
> I suggest that you look at:
> arch/arm64/boot/dts/qcom/ipq8074.dtsi
> 
> However, note that the PCI ranges are different for this SoC compared to
> ipq8074.
> 
> The correct ranges can be found here:
> https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998.dtsi?h=msm-4.4#n2538
> 
> It also appears that drivers/clk/qcom/gcc-msm8998.c is missing some PCIe
> resets.
> The correct addresses for these clocks can be found here:
> https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/clk/msm/clock-gcc-8998.c?h=msm-4.4
> 
> Note that the qcom_pcie_get_resources_2_3_3() will have to be modified
> slightly for msm8998, since msm8998 only has 3 PCIe resets.

Hello Niklas,

Thanks for the pointers. Bjorn also suggested I look into ipq8074.dtsi

Regards.

PCIe support in APQ8098-based board

[Marc Gonzalez]

On 12/11/2018 21:26, Niklas Cassel wrote:

> On Sun, Nov 11, 2018 at 11:26:29PM +0100, Marc Gonzalez wrote:
>> Hello,
> 
> Hello Marc
> 
>>
>> I'm playing with an APQ8098-based board, which I got to boot an upstream
>> v4.20-rc1 kernel to the command line, by reusing the msm8998-mtp.dts
>> (IIUC apq8098 is the msm8998's "little brother", in that they are
>> almost the same SoC, with some HW blocks missing in the apq8098).
> 
> That is correct.
> 
>>
>> I'm trying to get PCIe working on my eval board. I'm wondering if
>> someone from qcom, codeaurora, or linaro has perhaps already done
>> this work, and it's just not upstream yet?
> 
> Linaro will most likely look at this at some undefined time in the future.
> 
> Here are some hints in case you need this urgently:
> 
> msm8998 uses QCOM PCIe v2.3.3, which is supported by
> drivers/pci/controller/dwc/pcie-qcom.c
> 
> I suggest that you look at:
> arch/arm64/boot/dts/qcom/ipq8074.dtsi
> 
> However, note that the PCI ranges are different for this SoC compared to
> ipq8074.
> 
> The correct ranges can be found here:
> https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998.dtsi?h=msm-4.4#n2538
> 
> It also appears that drivers/clk/qcom/gcc-msm8998.c is missing some PCIe
> resets.
> The correct addresses for these clocks can be found here:
> https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/drivers/clk/msm/clock-gcc-8998.c?h=msm-4.4
> 
> Note that the qcom_pcie_get_resources_2_3_3() will have to be modified
> slightly for msm8998, since msm8998 only has 3 PCIe resets.

Hello Niklas,

Thanks for the pointers. Bjorn also suggested I look into ipq8074.dtsi

Regards.