From: maxime.ripard@bootlin.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings
Date: Mon, 19 Nov 2018 09:30:36 +0100 [thread overview]
Message-ID: <20181119083036.riydru5xefao3xte@flea> (raw)
In-Reply-To: <20181116163916.29621-4-jagan@amarulasolutions.com>
On Fri, Nov 16, 2018 at 10:09:07PM +0530, Jagan Teki wrote:
> Burst mode display timings are different from convectional
> video mode so update the horizontal and vertical timings.
>
> Reference code taken from BSP (from linux-sunxi/
> drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
>
> dsi_hsa = 0;
> dsi_hbp = 0;
> dsi_hact = x*dsi_pixel_bits[format]/8;
> dsi_hblk = dsi_hact;
> dsi_hfp = 0;
> dsi_vblk = 0;
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
How is that matching the code you have in the rest of your patch?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181119/927a7a8e/attachment-0001.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
To: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Cc: Maarten Lankhorst
<maarten.lankhorst-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Sean Paul <sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>,
Vasily Khoruzhick
<anarsoul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Michael Trimarchi
<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
TL Lim <tllim-F7SikzrIcFYdnm+yROfE0A@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Subject: Re: [PATCH v2 03/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings
Date: Mon, 19 Nov 2018 09:30:36 +0100 [thread overview]
Message-ID: <20181119083036.riydru5xefao3xte@flea> (raw)
In-Reply-To: <20181116163916.29621-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 679 bytes --]
On Fri, Nov 16, 2018 at 10:09:07PM +0530, Jagan Teki wrote:
> Burst mode display timings are different from convectional
> video mode so update the horizontal and vertical timings.
>
> Reference code taken from BSP (from linux-sunxi/
> drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
>
> dsi_hsa = 0;
> dsi_hbp = 0;
> dsi_hact = x*dsi_pixel_bits[format]/8;
> dsi_hblk = dsi_hact;
> dsi_hfp = 0;
> dsi_vblk = 0;
>
> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
How is that matching the code you have in the rest of your patch?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Icenowy Zheng <icenowy@aosc.io>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Vasily Khoruzhick <anarsoul@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Michael Trimarchi <michael@amarulasolutions.com>,
TL Lim <tllim@pine64.org>,
linux-sunxi@googlegroups.com, linux-amarula@amarulasolutions.com
Subject: Re: [PATCH v2 03/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings
Date: Mon, 19 Nov 2018 09:30:36 +0100 [thread overview]
Message-ID: <20181119083036.riydru5xefao3xte@flea> (raw)
In-Reply-To: <20181116163916.29621-4-jagan@amarulasolutions.com>
[-- Attachment #1: Type: text/plain, Size: 675 bytes --]
On Fri, Nov 16, 2018 at 10:09:07PM +0530, Jagan Teki wrote:
> Burst mode display timings are different from convectional
> video mode so update the horizontal and vertical timings.
>
> Reference code taken from BSP (from linux-sunxi/
> drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
>
> dsi_hsa = 0;
> dsi_hbp = 0;
> dsi_hact = x*dsi_pixel_bits[format]/8;
> dsi_hblk = dsi_hact;
> dsi_hfp = 0;
> dsi_vblk = 0;
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
How is that matching the code you have in the rest of your patch?
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2018-11-19 8:30 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 16:39 [PATCH v2 00/12] drm/sun4i: Allwinner MIPI-DSI Burst mode support Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 01/12] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-19 8:27 ` Maxime Ripard
2018-11-19 8:27 ` Maxime Ripard
2018-11-19 8:27 ` Maxime Ripard
2018-11-19 10:58 ` Jagan Teki
2018-11-19 10:58 ` Jagan Teki
2018-11-20 13:23 ` Maxime Ripard
2018-11-20 13:23 ` Maxime Ripard
2018-11-20 13:23 ` Maxime Ripard
2018-11-20 13:36 ` Jagan Teki
2018-11-20 13:36 ` Jagan Teki
2018-11-20 15:58 ` Maxime Ripard
2018-11-20 15:58 ` Maxime Ripard
2018-11-20 15:58 ` Maxime Ripard
2018-11-20 16:01 ` Vasily Khoruzhick
2018-11-20 16:01 ` Vasily Khoruzhick
2018-11-20 16:19 ` Jagan Teki
2018-11-20 16:19 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 02/12] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 03/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-19 8:30 ` Maxime Ripard [this message]
2018-11-19 8:30 ` Maxime Ripard
2018-11-19 8:30 ` Maxime Ripard
2018-11-19 11:00 ` Jagan Teki
2018-11-19 11:00 ` Jagan Teki
2018-11-19 11:00 ` Jagan Teki
2018-11-20 15:45 ` Maxime Ripard
2018-11-20 15:45 ` Maxime Ripard
2018-11-20 15:45 ` Maxime Ripard
2018-11-20 16:22 ` Jagan Teki
2018-11-20 16:22 ` Jagan Teki
2018-11-20 16:22 ` Jagan Teki
2018-11-27 10:07 ` Maxime Ripard
2018-11-27 10:07 ` Maxime Ripard
2018-11-27 10:07 ` Maxime Ripard
2018-11-16 16:39 ` [PATCH v2 04/12] drm/sun4i: sun6i_mipi_dsi: Simplify drq set to support all modes Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-19 8:32 ` Maxime Ripard
2018-11-19 8:32 ` Maxime Ripard
2018-11-19 8:32 ` Maxime Ripard
2018-11-19 11:22 ` Jagan Teki
2018-11-19 11:22 ` Jagan Teki
2018-11-20 14:32 ` Maxime Ripard
2018-11-20 14:32 ` Maxime Ripard
2018-11-20 14:32 ` Maxime Ripard
2018-11-20 14:48 ` Jagan Teki
2018-11-20 14:48 ` Jagan Teki
2018-11-20 14:48 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 05/12] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-19 8:34 ` Maxime Ripard
2018-11-19 8:34 ` Maxime Ripard
2018-11-19 8:34 ` Maxime Ripard
2018-11-16 16:39 ` [PATCH v2 06/12] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-19 8:38 ` Maxime Ripard
2018-11-19 8:38 ` Maxime Ripard
2018-11-19 8:38 ` Maxime Ripard
2018-11-19 11:36 ` Jagan Teki
2018-11-19 11:36 ` Jagan Teki
2018-11-19 11:36 ` Jagan Teki
2018-11-20 15:44 ` Maxime Ripard
2018-11-20 15:44 ` Maxime Ripard
2018-11-20 15:44 ` Maxime Ripard
2018-11-16 16:39 ` [PATCH v2 07/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 08/12] drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane " Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 09/12] drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 10/12] dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` [PATCH v2 11/12] drm/panel: " Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-12-10 16:12 ` Jagan Teki
2018-12-10 16:12 ` Jagan Teki
2018-12-10 16:12 ` Jagan Teki
2018-12-13 15:07 ` Sean Paul
2018-12-13 15:07 ` Sean Paul
2018-12-13 15:07 ` Sean Paul
2018-12-13 19:26 ` Jagan Teki
2018-12-13 19:26 ` Jagan Teki
2018-12-13 19:55 ` Sean Paul
2018-12-13 19:55 ` Sean Paul
2018-12-13 19:55 ` Sean Paul
2018-12-14 11:05 ` Jagan Teki
2018-12-14 11:05 ` Jagan Teki
2018-12-14 11:05 ` Jagan Teki
2018-12-14 14:15 ` Sean Paul
2018-12-14 14:15 ` Sean Paul
2018-12-14 14:15 ` Sean Paul
2018-11-16 16:39 ` [PATCH v2 12/12][DO NOT MERGE] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2018-11-16 16:39 ` Jagan Teki
2018-11-16 16:39 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181119083036.riydru5xefao3xte@flea \
--to=maxime.ripard@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.