[PATCH v2 3/4] iio: adc: add STMPE ADC devicetree bindings

[Philippe Schenker <dev@pschenker.ch>]

From: Stefan Agner <stefan@agner.ch>

This adds the devicetree bindings for the STMPE ADC.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

Changes in v2:
 - Moved the bindings for ADC to the overlying mfd.
 - Reformatted for better readability

 .../devicetree/bindings/iio/adc/stmpe-adc.txt | 21 ++++++++++++++
 .../bindings/input/touchscreen/stmpe.txt      | 11 --------
 .../devicetree/bindings/mfd/stmpe.txt         | 28 ++++++++++++++-----
 3 files changed, 42 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
new file mode 100644
index 000000000000..480e66422625
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt
@@ -0,0 +1,21 @@
+STMPE ADC driver
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-adc"
+
+Optional properties:
+Note that the ADC is shared with the STMPE touchscreen. ADC related settings
+have to be done in the mfd.
+- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
+  requestable due to different usage (e.g. touch)
+
+Node name must be stmpe_adc and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_adc {
+		compatible = "st,stmpe-adc";
+		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index 127baa31a77a..71e1359749f2 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -5,13 +5,6 @@ Required properties:
  - compatible: "st,stmpe-ts"
 
 Optional properties:
-- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
-  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
-  -> 144 clocks), recommended is 4.
-- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
-- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
-  reference)
-- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
 - st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
   samples, 3 -> 8 samples)
 - st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
@@ -31,10 +24,6 @@ Example:
 
 	stmpe_touchscreen {
 		compatible = "st,stmpe-ts";
-		st,sample-time = <4>;
-		st,mod-12b = <1>;
-		st,ref-sel = <0>;
-		st,adc-freq = <1>;
 		st,ave-ctrl = <1>;
 		st,touch-det-delay = <2>;
 		st,settling = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index c797c05cd3c2..bd991514d6c1 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
 keypad, touchscreen, adc, pwm, rotator.
 
 Required properties:
- - compatible                   : "st,stmpe[610|801|811|1600|1601|2401|2403]"
- - reg                          : I2C/SPI address of the device
+ - compatible			: "st,stmpe[610|801|811|1600|1601|2401|2403]"
+ - reg				: I2C/SPI address of the device
 
 Optional properties:
- - interrupts                   : The interrupt outputs from the controller
- - interrupt-controller         : Marks the device node as an interrupt controller
- - wakeup-source                : Marks the input device as wakable
- - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- - irq-gpio                     : If present, which GPIO to use for event IRQ
+ - interrupts			: The interrupt outputs from the controller
+ - interrupt-controller		: Marks the device node as an interrupt controller
+ - wakeup-source		: Marks the input device as wakable
+ - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio			: If present, which GPIO to use for event IRQ
+
+Optional properties for devices with touch and ADC (STMPE811|STMPE610):
+ - st,sample-time		: ADC conversion time in number of clock.
+					0 -> 36 clocks		4 -> 80 clocks (recommended)
+					1 -> 44 clocks		5 -> 96 clocks
+					2 -> 56 clocks		6 -> 144 clocks
+					3 -> 64 clocks
+ - st,mod-12b			: ADC Bit mode
+					0 -> 10bit ADC		1 -> 12bit ADC
+ - st,ref-sel			: ADC reference source
+					0 -> internal		1 -> external
+ - st,adc-freq			: ADC Clock speed
+					0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
+					1 -> 3.25 MHz
 
 Example:
 
-- 
2.19.1