All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Glauber <Jan.Glauber@cavium.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "marc.zyngier@arm.com" <marc.zyngier@arm.com>,
	"john.garry@huawei.com" <john.garry@huawei.com>,
	"linux-efi@vger.kernel.org" <linux-efi@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [RFT PATCH] efi: map memreserve table before first use
Date: Wed, 21 Nov 2018 09:56:54 +0000	[thread overview]
Message-ID: <20181121095648.GA11514@hc> (raw)
In-Reply-To: <20181120173542.31444-1-ard.biesheuvel@linaro.org>

On Tue, Nov 20, 2018 at 06:35:42PM +0100, Ard Biesheuvel wrote:
> Mapping the MEMRESERVE EFI configuration table from an early initcall
> is too late: the GICv3 ITS code that creates persistent reservations
> for the boot CPU's LPI tables is invoked from init_IRQ(), which runs
> much earlier than the handling of the initcalls.
> 
> So instead, move the initialization performed by the initcall into
> efi_mem_reserve_persistent() itself.
> 
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
>  drivers/firmware/efi/efi.c | 26 ++++++++++----------------
>  1 file changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> index fad7c62cfc0e..40de2f6734cc 100644
> --- a/drivers/firmware/efi/efi.c
> +++ b/drivers/firmware/efi/efi.c
> @@ -967,15 +967,23 @@ bool efi_is_table_address(unsigned long phys_addr)
>  }
> 
>  static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
> -static struct linux_efi_memreserve *efi_memreserve_root __ro_after_init;
> +static struct linux_efi_memreserve *efi_memreserve_root;
> 
>  int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
>  {
>         struct linux_efi_memreserve *rsv;
> 
> -       if (!efi_memreserve_root)
> +       if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
>                 return -ENODEV;
> 
> +       if (!efi_memreserve_root) {
> +               efi_memreserve_root = memremap(efi.mem_reserve,
> +                                              sizeof(*efi_memreserve_root),
> +                                              MEMREMAP_WB);
> +               if (WARN_ON_ONCE(!efi_memreserve_root))
> +                       return -ENOMEM;
> +       }
> +
>         rsv = kmalloc(sizeof(*rsv), GFP_ATOMIC);
>         if (!rsv)
>                 return -ENOMEM;
> @@ -991,20 +999,6 @@ int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
>         return 0;
>  }
> 
> -static int __init efi_memreserve_root_init(void)
> -{
> -       if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
> -               return -ENODEV;
> -
> -       efi_memreserve_root = memremap(efi.mem_reserve,
> -                                      sizeof(*efi_memreserve_root),
> -                                      MEMREMAP_WB);
> -       if (!efi_memreserve_root)
> -               return -ENOMEM;
> -       return 0;
> -}
> -early_initcall(efi_memreserve_root_init);
> -
>  #ifdef CONFIG_KEXEC
>  static int update_efi_random_seed(struct notifier_block *nb,
>                                   unsigned long code, void *unused)
> --
> 2.17.1

Hi Ard,

thanks for the patch, it works fine for me.

If you want:
Tested-by: Jan Glauber <jglauber@cavium.com>

--Jan

WARNING: multiple messages have this Message-ID (diff)
From: Jan.Glauber@cavium.com (Jan Glauber)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFT PATCH] efi: map memreserve table before first use
Date: Wed, 21 Nov 2018 09:56:54 +0000	[thread overview]
Message-ID: <20181121095648.GA11514@hc> (raw)
In-Reply-To: <20181120173542.31444-1-ard.biesheuvel@linaro.org>

On Tue, Nov 20, 2018 at 06:35:42PM +0100, Ard Biesheuvel wrote:
> Mapping the MEMRESERVE EFI configuration table from an early initcall
> is too late: the GICv3 ITS code that creates persistent reservations
> for the boot CPU's LPI tables is invoked from init_IRQ(), which runs
> much earlier than the handling of the initcalls.
> 
> So instead, move the initialization performed by the initcall into
> efi_mem_reserve_persistent() itself.
> 
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> ---
>  drivers/firmware/efi/efi.c | 26 ++++++++++----------------
>  1 file changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> index fad7c62cfc0e..40de2f6734cc 100644
> --- a/drivers/firmware/efi/efi.c
> +++ b/drivers/firmware/efi/efi.c
> @@ -967,15 +967,23 @@ bool efi_is_table_address(unsigned long phys_addr)
>  }
> 
>  static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
> -static struct linux_efi_memreserve *efi_memreserve_root __ro_after_init;
> +static struct linux_efi_memreserve *efi_memreserve_root;
> 
>  int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
>  {
>         struct linux_efi_memreserve *rsv;
> 
> -       if (!efi_memreserve_root)
> +       if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
>                 return -ENODEV;
> 
> +       if (!efi_memreserve_root) {
> +               efi_memreserve_root = memremap(efi.mem_reserve,
> +                                              sizeof(*efi_memreserve_root),
> +                                              MEMREMAP_WB);
> +               if (WARN_ON_ONCE(!efi_memreserve_root))
> +                       return -ENOMEM;
> +       }
> +
>         rsv = kmalloc(sizeof(*rsv), GFP_ATOMIC);
>         if (!rsv)
>                 return -ENOMEM;
> @@ -991,20 +999,6 @@ int efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
>         return 0;
>  }
> 
> -static int __init efi_memreserve_root_init(void)
> -{
> -       if (efi.mem_reserve == EFI_INVALID_TABLE_ADDR)
> -               return -ENODEV;
> -
> -       efi_memreserve_root = memremap(efi.mem_reserve,
> -                                      sizeof(*efi_memreserve_root),
> -                                      MEMREMAP_WB);
> -       if (!efi_memreserve_root)
> -               return -ENOMEM;
> -       return 0;
> -}
> -early_initcall(efi_memreserve_root_init);
> -
>  #ifdef CONFIG_KEXEC
>  static int update_efi_random_seed(struct notifier_block *nb,
>                                   unsigned long code, void *unused)
> --
> 2.17.1

Hi Ard,

thanks for the patch, it works fine for me.

If you want:
Tested-by: Jan Glauber <jglauber@cavium.com>

--Jan

  parent reply	other threads:[~2018-11-21  9:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20 17:35 [RFT PATCH] efi: map memreserve table before first use Ard Biesheuvel
2018-11-20 17:35 ` Ard Biesheuvel
2018-11-20 18:29 ` Marc Zyngier
2018-11-20 18:29   ` Marc Zyngier
2018-11-20 18:35   ` Ard Biesheuvel
2018-11-20 18:35     ` Ard Biesheuvel
2018-11-20 18:44     ` Marc Zyngier
2018-11-20 18:44       ` Marc Zyngier
2018-11-21  9:56 ` Jan Glauber [this message]
2018-11-21  9:56   ` Jan Glauber
2018-11-21 13:33   ` John Garry
2018-11-21 13:33     ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181121095648.GA11514@hc \
    --to=jan.glauber@cavium.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=john.garry@huawei.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.