From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3 3/3] merge_config.sh: Avoid false positive matches from comment lines
Date: Fri, 23 Nov 2018 22:16:25 +0100 [thread overview]
Message-ID: <20181123211625.GG14050@scaer> (raw)
In-Reply-To: <20181114071156.10453-4-afshin.nasser@gmail.com>
Nasser, All,
On 2018-11-14 10:41 +0330, Nasser Afshin spake thusly:
> From: Nasser Afshin <Afshin.Nasser@gmail.com>
>
> We are using empty CONFIG_PREFIX_. This results in false positive match
> for comment lines when merging config fragments.
>
> To avoid false positive reports, we use separate sed expressions and
> address comment lines explicitly.
>
> This is actually is in the Linux kernel mainline (v4.20-rc2):
> 6bbe4385d035c6fac56f840a59861a0310ce137b
> ("kconfig: merge_config: avoid false positive matches from comment lines")
>
> Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> support/kconfig/merge_config.sh | 7 +++--
> ...false-positive-matches-from-comment-lines.patch | 32 ++++++++++++++++++++++
> support/kconfig/patches/series | 1 +
> 3 files changed, 37 insertions(+), 3 deletions(-)
> create mode 100644 support/kconfig/patches/21-Avoid-false-positive-matches-from-comment-lines.patch
>
> diff --git a/support/kconfig/merge_config.sh b/support/kconfig/merge_config.sh
> index 404ca3864f..14917806a3 100755
> --- a/support/kconfig/merge_config.sh
> +++ b/support/kconfig/merge_config.sh
> @@ -109,7 +109,8 @@ if [ ! -r "$INITFILE" ]; then
> fi
>
> MERGE_LIST=$*
> -SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
> +SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
> +SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
>
> TMP_FILE=$(mktemp -t .tmp.config.XXXXXXXXXX)
>
> @@ -123,7 +124,7 @@ for MERGE_FILE in $MERGE_LIST ; do
> echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
> exit 1
> fi
> - CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
> + CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
>
> for CFG in $CFG_LIST ; do
> grep -q -w $CFG $TMP_FILE || continue
> @@ -166,7 +167,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $EXTERNAL_ARG $OUTPUT_ARG $ALLTARGET
>
>
> # Check all specified config values took (might have missed-dependency issues)
> -for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
> +for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
>
> REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
> ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
> diff --git a/support/kconfig/patches/21-Avoid-false-positive-matches-from-comment-lines.patch b/support/kconfig/patches/21-Avoid-false-positive-matches-from-comment-lines.patch
> new file mode 100644
> index 0000000000..c11144e47e
> --- /dev/null
> +++ b/support/kconfig/patches/21-Avoid-false-positive-matches-from-comment-lines.patch
> @@ -0,0 +1,32 @@
> +Index: kconfig/merge_config.sh
> +===================================================================
> +--- kconfig.orig/merge_config.sh
> ++++ kconfig/merge_config.sh
> +@@ -109,7 +109,8 @@ if [ ! -r "$INITFILE" ]; then
> + fi
> +
> + MERGE_LIST=$*
> +-SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
> ++SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
> ++SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
> +
> + TMP_FILE=$(mktemp -t .tmp.config.XXXXXXXXXX)
> +
> +@@ -123,7 +124,7 @@ for MERGE_FILE in $MERGE_LIST ; do
> + echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
> + exit 1
> + fi
> +- CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
> ++ CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
> +
> + for CFG in $CFG_LIST ; do
> + grep -q -w $CFG $TMP_FILE || continue
> +@@ -166,7 +167,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $EXTERN
> +
> +
> + # Check all specified config values took (might have missed-dependency issues)
> +-for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
> ++for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
> +
> + REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
> + ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
> diff --git a/support/kconfig/patches/series b/support/kconfig/patches/series
> index be8627db13..e5a6f69d8f 100644
> --- a/support/kconfig/patches/series
> +++ b/support/kconfig/patches/series
> @@ -9,3 +9,4 @@
> 18-merge-config.sh-create-temporary-files-in-tmp.patch
> 19-merge_config.sh-add-br2-external-support.patch
> 20-merge_config.sh-Allow-to-define-config-prefix.patch
> +21-Avoid-false-positive-matches-from-comment-lines.patch
> --
> 2.15.0
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2018-11-23 21:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-14 7:11 [Buildroot] [PATCH v3 0/3] Fix merging configuration fragments Nasser Afshin
2018-11-14 7:11 ` [Buildroot] [PATCH v3 1/3] merge_config.sh: Fix merging buildroot config files Nasser Afshin
2018-11-23 21:14 ` Yann E. MORIN
2018-11-24 9:12 ` Thomas Petazzoni
2018-11-14 7:11 ` [Buildroot] [PATCH v3 2/3] test-pkg: Use the correct config prefix when merging Nasser Afshin
2018-11-14 7:17 ` Petr Vorel
2018-11-14 7:49 ` Nasser Afshin
2018-11-14 8:24 ` Arnout Vandecappelle
2018-11-14 8:29 ` Petr Vorel
2018-11-14 8:55 ` Nasser Afshin
2018-11-14 9:04 ` Nasser Afshin
2018-11-14 7:11 ` [Buildroot] [PATCH v3 3/3] merge_config.sh: Avoid false positive matches from comment lines Nasser Afshin
2018-11-23 21:16 ` Yann E. MORIN [this message]
2018-11-24 9:12 ` Thomas Petazzoni
-- strict thread matches above, loose matches on Subject: below --
2018-11-05 8:35 [Buildroot] [PATCH] merge_config.sh: Fix merging buildroot config files Petr Vorel
2018-11-13 13:44 ` [Buildroot] [PATCH v3 0/3] Fix merging configuration fragments Nasser Afshin
2018-11-13 13:44 ` [Buildroot] [PATCH v3 3/3] merge_config.sh: Avoid false positive matches from comment lines Nasser Afshin
2018-11-13 18:38 ` Petr Vorel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181123211625.GG14050@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.