From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 3.18.128
Date: Sun, 2 Dec 2018 08:34:43 +0100 [thread overview]
Message-ID: <20181202073443.GB32143@kroah.com> (raw)
In-Reply-To: <20181202073436.GA32143@kroah.com>
diff --git a/Makefile b/Makefile
index 7c78eb797de8..9060189af162 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
-SUBLEVEL = 127
+SUBLEVEL = 128
EXTRAVERSION =
NAME = Diseased Newt
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 37c4fd6aeb7a..42065599d014 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,7 +10,7 @@
#
# Copyright (C) 1995-2001 by Russell King
-LDFLAGS_vmlinux :=-p --no-undefined -X
+LDFLAGS_vmlinux :=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b9d1dfdbe5bb..ae9d3bf79612 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1479,7 +1479,7 @@ static long vphn_get_associativity(unsigned long cpu,
switch (rc) {
case H_FUNCTION:
- printk(KERN_INFO
+ printk_once(KERN_INFO
"VPHN is not supported. Disabling polling...\n");
stop_topology_update();
break;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index c2d30765bf3d..a4ede00483d1 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -105,8 +105,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
/* Ensure the arm clock divider is what we expect */
ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
+ int ret1;
+
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
- regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ if (ret1)
+ dev_warn(cpu_dev,
+ "failed to restore vddarm voltage: %d\n", ret1);
return ret;
}
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 9a32d9dfdd26..011700262824 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = {
MODULE_DEVICE_TABLE(pci, pciidlist);
+static void ast_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+ bool primary = false;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+ primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+ remove_conflicting_framebuffers(ap, "astdrmfb", primary);
+ kfree(ap);
+}
+
static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ ast_kick_out_firmware_fb(pdev);
+
return drm_get_pci_dev(pdev, ent, &driver);
}
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 9dc0fd5c1ea4..a43d81b6d5d1 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -549,6 +549,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc,
}
ast_bo_unreserve(bo);
+ ast_set_offset_reg(crtc);
ast_set_start_address_crt1(crtc, (u32)gpu_addr);
return 0;
@@ -1246,7 +1247,7 @@ static int ast_cursor_move(struct drm_crtc *crtc,
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
/* dummy write to fire HWC */
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00);
+ ast_show_cursor(crtc);
return 0;
}
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index e29c04e2aff4..e853a2134680 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -527,14 +527,14 @@ EXPORT_SYMBOL(gameport_set_phys);
*/
static void gameport_init_port(struct gameport *gameport)
{
- static atomic_t gameport_no = ATOMIC_INIT(0);
+ static atomic_t gameport_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
mutex_init(&gameport->drv_mutex);
device_initialize(&gameport->dev);
dev_set_name(&gameport->dev, "gameport%lu",
- (unsigned long)atomic_inc_return(&gameport_no) - 1);
+ (unsigned long)atomic_inc_return(&gameport_no));
gameport->dev.bus = &gameport_bus;
gameport->dev.release = gameport_release_port;
if (gameport->parent)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 1a728f310b27..2e52015634f9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -31,12 +31,14 @@
* - the iForce driver drivers/char/joystick/iforce.c
* - the skeleton-driver drivers/usb/usb-skeleton.c
* - Xbox 360 information http://www.free60.org/wiki/Gamepad
+ * - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
*
* Thanks to:
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
* - XBOX Linux project - extra USB id's
+ * - Pekka Pöyry (quantus) - Xbox One controller reverse engineering
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -74,18 +76,23 @@
*/
#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
+#include <linux/usb/quirks.h>
#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
#define DRIVER_DESC "X-Box pad driver"
-#define XPAD_PKT_LEN 32
+#define XPAD_PKT_LEN 64
-/* xbox d-pads should map to buttons, as is required for DDR pads
- but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
#define MAP_DPAD_TO_BUTTONS (1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
@@ -110,6 +117,10 @@ static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
+static bool auto_poweroff = true;
+module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");
+
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
@@ -117,42 +128,77 @@ static const struct xpad_device {
u8 mapping;
u8 xtype;
} xpad_device[] = {
+ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+ { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+ { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
- { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+ { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
- { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
- { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+ { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
+ { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
+ { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
+ { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+ { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+ { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
+ { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
+ { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
+ { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -160,32 +206,66 @@ static const struct xpad_device {
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
+ { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+ { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
+ { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -193,24 +273,67 @@ static const struct xpad_device {
{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -241,7 +364,6 @@ static const signed short xpad_btn_triggers[] = {
-1
};
-
static const signed short xpad360_btn[] = { /* buttons for x360 controller */
BTN_TL, BTN_TR, /* Button LB/RB */
BTN_MODE, /* The big X button */
@@ -272,15 +394,15 @@ static const signed short xpad_abs_triggers[] = {
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
* wireless controllers have protocol 129.
*/
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (vend), \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
.bInterfaceSubClass = 93, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -290,51 +412,175 @@ static const signed short xpad_abs_triggers[] = {
.bInterfaceSubClass = 71, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
- { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+ { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
-static struct usb_device_id xpad_table[] = {
+static const struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
+ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 Controller */
XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
+ XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */
+ XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
+ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
+ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
+ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
- XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
- XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
- XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
+ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
+ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
{ }
};
MODULE_DEVICE_TABLE(usb, xpad_table);
+struct xboxone_init_packet {
+ u16 idVendor;
+ u16 idProduct;
+ const u8 *data;
+ u8 len;
+};
+
+#define XBOXONE_INIT_PKT(_vid, _pid, _data) \
+ { \
+ .idVendor = (_vid), \
+ .idProduct = (_pid), \
+ .data = (_data), \
+ .len = ARRAY_SIZE(_data), \
+ }
+
+
+/*
+ * This packet is required for all Xbox One pads with 2015
+ * or later firmware installed (or present from the factory).
+ */
+static const u8 xboxone_fw2015_init[] = {
+ 0x05, 0x20, 0x00, 0x01, 0x00
+};
+
+/*
+ * This packet is required for the Titanfall 2 Xbox One pads
+ * (0x0e6f:0x0165) to finish initialization and for Hori pads
+ * (0x0f0d:0x0067) to make the analog sticks work.
+ */
+static const u8 xboxone_hori_init[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a,
+ 0x00, 0x00, 0x00, 0x80, 0x00
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init1[] = {
+ 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init2[] = {
+ 0x06, 0x20, 0x00, 0x02, 0x01, 0x00
+};
+
+/*
+ * A specific rumble packet is required for some PowerA pads to start
+ * sending input reports. One of those pads is (0x24c6:0x543a).
+ */
+static const u8 xboxone_rumblebegin_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x1D, 0x1D, 0xFF, 0x00, 0x00
+};
+
+/*
+ * A rumble packet with zero FF intensity will immediately
+ * terminate the rumbling required to init PowerA pads.
+ * This should happen fast enough that the motors don't
+ * spin up to enough speed to actually vibrate the gamepad.
+ */
+static const u8 xboxone_rumbleend_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+/*
+ * This specifies the selection of init packets that a gamepad
+ * will be sent on init *and* the order in which they will be
+ * sent. The correct sequence number will be added when the
+ * packet is going to be sent.
+ */
+static const struct xboxone_init_packet xboxone_init_packets[] = {
+ XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
+};
+
+struct xpad_output_packet {
+ u8 data[XPAD_PKT_LEN];
+ u8 len;
+ bool pending;
+};
+
+#define XPAD_OUT_CMD_IDX 0
+#define XPAD_OUT_FF_IDX 1
+#define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
+#define XPAD_NUM_OUT_PACKETS (1 + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))
+
struct usb_xpad {
struct input_dev *dev; /* input device interface */
+ struct input_dev __rcu *x360w_dev;
struct usb_device *udev; /* usb device */
struct usb_interface *intf; /* usb interface */
- int pad_present;
+ bool pad_present;
+ bool input_created;
struct urb *irq_in; /* urb for interrupt in report */
unsigned char *idata; /* input data */
dma_addr_t idata_dma;
- struct urb *bulk_out;
- unsigned char *bdata;
-
struct urb *irq_out; /* urb for interrupt out report */
+ struct usb_anchor irq_out_anchor;
+ bool irq_out_active; /* we must not use an active URB */
+ u8 odata_serial; /* serial number for xbox one protocol */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
- struct mutex odata_mutex;
+ spinlock_t odata_lock;
+
+ struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
+ int last_out_packet;
+ int init_seq;
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -344,8 +590,15 @@ struct usb_xpad {
int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
+ int pad_nr; /* the order x360 pads were attached */
+ const char *name; /* name of the device */
+ struct work_struct work; /* init/remove device from callback */
};
+static int xpad_init_input(struct usb_xpad *xpad);
+static void xpad_deinit_input(struct usb_xpad *xpad);
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
+
/*
* xpad_process_packet
*
@@ -355,7 +608,6 @@ struct usb_xpad {
* The used report descriptor was taken from ITO Takayukis website:
* http://euc.jp/periphs/xbox-controller.ja.html
*/
-
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
struct input_dev *dev = xpad->dev;
@@ -426,10 +678,12 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
* http://www.free60.org/wiki/Gamepad
*/
-static void xpad360_process_packet(struct usb_xpad *xpad,
+static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
u16 cmd, unsigned char *data)
{
- struct input_dev *dev = xpad->dev;
+ /* valid pad data */
+ if (data[0] != 0x00)
+ return;
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
@@ -438,7 +692,16 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
- } else {
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
input_report_abs(dev, ABS_HAT0X,
!!(data[2] & 0x08) - !!(data[2] & 0x04));
input_report_abs(dev, ABS_HAT0Y,
@@ -488,6 +751,31 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_sync(dev);
}
+static void xpad_presence_work(struct work_struct *work)
+{
+ struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
+ int error;
+
+ if (xpad->pad_present) {
+ error = xpad_init_input(xpad);
+ if (error) {
+ /* complain only, not much else we can do here */
+ dev_err(&xpad->dev->dev,
+ "unable to init device: %d\n", error);
+ } else {
+ rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
+ }
+ } else {
+ RCU_INIT_POINTER(xpad->x360w_dev, NULL);
+ synchronize_rcu();
+ /*
+ * Now that we are sure xpad360w_process_packet is not
+ * using input device we can get rid of it.
+ */
+ xpad_deinit_input(xpad);
+ }
+}
+
/*
* xpad360w_process_packet
*
@@ -502,34 +790,63 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
* 01.1 - Pad state (Bytes 4+) valid
*
*/
-
static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev;
+ bool present;
+
/* Presence change */
if (data[0] & 0x08) {
- if (data[1] & 0x80) {
- xpad->pad_present = 1;
- usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
- } else
- xpad->pad_present = 0;
+ present = (data[1] & 0x80) != 0;
+
+ if (xpad->pad_present != present) {
+ xpad->pad_present = present;
+ schedule_work(&xpad->work);
+ }
}
/* Valid pad data */
- if (!(data[1] & 0x1))
+ if (data[1] != 0x1)
return;
- xpad360_process_packet(xpad, cmd, &data[4]);
+ rcu_read_lock();
+ dev = rcu_dereference(xpad->x360w_dev);
+ if (dev)
+ xpad360_process_packet(xpad, dev, cmd, &data[4]);
+ rcu_read_unlock();
}
/*
- * xpadone_process_buttons
+ * xpadone_process_packet
*
- * Process a button update packet from an Xbox one controller.
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
+ *
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
*/
-static void xpadone_process_buttons(struct usb_xpad *xpad,
- struct input_dev *dev,
- unsigned char *data)
+static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev = xpad->dev;
+
+ /* the xbox button has its own special report */
+ if (data[0] == 0X07) {
+ /*
+ * The Xbox One S controller requires these reports to be
+ * acked otherwise it continues sending them forever and
+ * won't report further mode button events.
+ */
+ if (data[1] == 0x30)
+ xpadone_ack_mode_report(xpad, data[2]);
+
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ return;
+ }
+ /* check invalid packet */
+ else if (data[0] != 0X20)
+ return;
+
/* menu/view buttons */
input_report_key(dev, BTN_START, data[4] & 0x04);
input_report_key(dev, BTN_SELECT, data[4] & 0x08);
@@ -592,34 +909,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad,
input_sync(dev);
}
-/*
- * xpadone_process_packet
- *
- * Completes a request by converting the data into events for the
- * input subsystem. This version is for the Xbox One controller.
- *
- * The report format was gleaned from
- * https://github.com/kylelemons/xbox/blob/master/xbox.go
- */
-
-static void xpadone_process_packet(struct usb_xpad *xpad,
- u16 cmd, unsigned char *data)
-{
- struct input_dev *dev = xpad->dev;
-
- switch (data[0]) {
- case 0x20:
- xpadone_process_buttons(xpad, dev, data);
- break;
-
- case 0x07:
- /* the xbox button has its own special report */
- input_report_key(dev, BTN_MODE, data[4] & 0x01);
- input_sync(dev);
- break;
- }
-}
-
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -647,7 +936,7 @@ static void xpad_irq_in(struct urb *urb)
switch (xpad->xtype) {
case XTYPE_XBOX360:
- xpad360_process_packet(xpad, 0, xpad->idata);
+ xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
break;
case XTYPE_XBOX360W:
xpad360w_process_packet(xpad, 0, xpad->idata);
@@ -666,40 +955,109 @@ exit:
__func__, retval);
}
-static void xpad_bulk_out(struct urb *urb)
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = urb->context;
- struct device *dev = &xpad->intf->dev;
+ const struct xboxone_init_packet *init_packet;
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n",
- __func__, urb->status);
- break;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n",
- __func__, urb->status);
+ if (xpad->xtype != XTYPE_XBOXONE)
+ return false;
+
+ /* Perform initialization sequence for Xbox One pads that require it */
+ while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
+ init_packet = &xboxone_init_packets[xpad->init_seq++];
+
+ if (init_packet->idVendor != 0 &&
+ init_packet->idVendor != xpad->dev->id.vendor)
+ continue;
+
+ if (init_packet->idProduct != 0 &&
+ init_packet->idProduct != xpad->dev->id.product)
+ continue;
+
+ /* This packet applies to our device, so prepare to send it */
+ memcpy(xpad->odata, init_packet->data, init_packet->len);
+ xpad->irq_out->transfer_buffer_length = init_packet->len;
+
+ /* Update packet with current sequence number */
+ xpad->odata[2] = xpad->odata_serial++;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *pkt, *packet = NULL;
+ int i;
+
+ /* We may have init packets to send before we can send user commands */
+ if (xpad_prepare_next_init_packet(xpad))
+ return true;
+
+ for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
+ if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
+ xpad->last_out_packet = 0;
+
+ pkt = &xpad->out_packets[xpad->last_out_packet];
+ if (pkt->pending) {
+ dev_dbg(&xpad->intf->dev,
+ "%s - found pending output packet %d\n",
+ __func__, xpad->last_out_packet);
+ packet = pkt;
+ break;
+ }
+ }
+
+ if (packet) {
+ memcpy(xpad->odata, packet->data, packet->len);
+ xpad->irq_out->transfer_buffer_length = packet->len;
+ packet->pending = false;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
+{
+ int error;
+
+ if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
+ error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+ if (error) {
+ dev_err(&xpad->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(xpad->irq_out);
+ return -EIO;
+ }
+
+ xpad->irq_out_active = true;
}
+
+ return 0;
}
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
struct device *dev = &xpad->intf->dev;
- int retval, status;
+ int status = urb->status;
+ int error;
+ unsigned long flags;
- status = urb->status;
+ spin_lock_irqsave(&xpad->odata_lock, flags);
switch (status) {
case 0:
/* success */
- return;
+ xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
+ break;
case -ECONNRESET:
case -ENOENT:
@@ -707,49 +1065,53 @@ static void xpad_irq_out(struct urb *urb)
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, status);
- return;
+ xpad->irq_out_active = false;
+ break;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, status);
- goto exit;
+ break;
}
-exit:
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
- __func__, retval);
+ if (xpad->irq_out_active) {
+ usb_anchor_urb(urb, &xpad->irq_out_anchor);
+ error = usb_submit_urb(urb, GFP_ATOMIC);
+ if (error) {
+ dev_err(dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(urb);
+ xpad->irq_out_active = false;
+ }
+ }
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
}
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
+ struct usb_endpoint_descriptor *ep_irq_out)
{
- struct usb_endpoint_descriptor *ep_irq_out;
- int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
+ init_usb_anchor(&xpad->irq_out_anchor);
+
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
- if (!xpad->odata) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad->odata)
+ return -ENOMEM;
- mutex_init(&xpad->odata_mutex);
+ spin_lock_init(&xpad->odata_lock);
xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_out) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_coherent;
}
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
- ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
-
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -759,14 +1121,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
return 0;
- fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
- fail1: return error;
+err_free_coherent:
+ usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ return error;
}
static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_UNKNOWN)
- usb_kill_urb(xpad->irq_out);
+ if (xpad->xtype != XTYPE_UNKNOWN) {
+ if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+ 5000)) {
+ dev_warn(&xpad->intf->dev,
+ "timed out waiting for output URB to complete, killing\n");
+ usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+ }
+ }
}
static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -778,72 +1147,179 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
}
}
+static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x08;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out presence first */
+ xpad->last_out_packet = -1;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static int xpad_start_xbox_one(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ /*
+ * Begin the init sequence by attempting to send a packet.
+ * We will cycle through the init packet sequence before
+ * sending any packets from the output ring.
+ */
+ xpad->init_seq = 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ static const u8 mode_report_ack[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->len = sizeof(mode_report_ack);
+ memcpy(packet->data, mode_report_ack, packet->len);
+ packet->data[2] = seq_num;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out the ack now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct usb_xpad *xpad = input_get_drvdata(dev);
+ struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
+ __u16 strong;
+ __u16 weak;
+ int retval;
+ unsigned long flags;
- if (effect->type == FF_RUMBLE) {
- __u16 strong = effect->u.rumble.strong_magnitude;
- __u16 weak = effect->u.rumble.weak_magnitude;
-
- switch (xpad->xtype) {
-
- case XTYPE_XBOX:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x06;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator */
- xpad->odata[4] = 0x00;
- xpad->odata[5] = weak / 256; /* right actuator */
- xpad->irq_out->transfer_buffer_length = 6;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x08;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator? */
- xpad->odata[4] = weak / 256; /* right actuator? */
- xpad->odata[5] = 0x00;
- xpad->odata[6] = 0x00;
- xpad->odata[7] = 0x00;
- xpad->irq_out->transfer_buffer_length = 8;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360W:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x01;
- xpad->odata[2] = 0x0F;
- xpad->odata[3] = 0xC0;
- xpad->odata[4] = 0x00;
- xpad->odata[5] = strong / 256;
- xpad->odata[6] = weak / 256;
- xpad->odata[7] = 0x00;
- xpad->odata[8] = 0x00;
- xpad->odata[9] = 0x00;
- xpad->odata[10] = 0x00;
- xpad->odata[11] = 0x00;
- xpad->irq_out->transfer_buffer_length = 12;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- default:
- dev_dbg(&xpad->dev->dev,
- "%s - rumble command sent to unsupported xpad type: %d\n",
- __func__, xpad->xtype);
- return -1;
- }
+ if (effect->type != FF_RUMBLE)
+ return 0;
+
+ strong = effect->u.rumble.strong_magnitude;
+ weak = effect->u.rumble.weak_magnitude;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x06;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator */
+ packet->data[4] = 0x00;
+ packet->data[5] = weak / 256; /* right actuator */
+ packet->len = 6;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x08;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator? */
+ packet->data[4] = weak / 256; /* right actuator? */
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->len = 8;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x01;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = strong / 256;
+ packet->data[6] = weak / 256;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOXONE:
+ packet->data[0] = 0x09; /* activate rumble */
+ packet->data[1] = 0x00;
+ packet->data[2] = xpad->odata_serial++;
+ packet->data[3] = 0x09;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x0F;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = strong / 512; /* left actuator */
+ packet->data[9] = weak / 512; /* right actuator */
+ packet->data[10] = 0xFF; /* on period */
+ packet->data[11] = 0x00; /* off period */
+ packet->data[12] = 0xFF; /* repeat count */
+ packet->len = 13;
+ packet->pending = true;
+ break;
+
+ default:
+ dev_dbg(&xpad->dev->dev,
+ "%s - rumble command sent to unsupported xpad type: %d\n",
+ __func__, xpad->xtype);
+ retval = -EINVAL;
+ goto out;
}
- return 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+out:
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+ return retval;
}
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
+ if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -857,6 +1333,9 @@ static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
#include <linux/leds.h>
+#include <linux/idr.h>
+
+static DEFINE_IDA(xpad_pad_seq);
struct xpad_led {
char name[16];
@@ -864,17 +1343,75 @@ struct xpad_led {
struct usb_xpad *xpad;
};
+/**
+ * set the LEDs on Xbox360 / Wireless Controllers
+ * @param command
+ * 0: off
+ * 1: all blink, then previous setting
+ * 2: 1/top-left blink, then on
+ * 3: 2/top-right blink, then on
+ * 4: 3/bottom-left blink, then on
+ * 5: 4/bottom-right blink, then on
+ * 6: 1/top-left on
+ * 7: 2/top-right on
+ * 8: 3/bottom-left on
+ * 9: 4/bottom-right on
+ * 10: rotate
+ * 11: blink, based on previous setting
+ * 12: slow blink, based on previous setting
+ * 13: rotate with two lights
+ * 14: persistent slow all blink
+ * 15: blink once, then previous setting
+ */
static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
- if (command >= 0 && command < 14) {
- mutex_lock(&xpad->odata_mutex);
- xpad->odata[0] = 0x01;
- xpad->odata[1] = 0x03;
- xpad->odata[2] = command;
- xpad->irq_out->transfer_buffer_length = 3;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
- mutex_unlock(&xpad->odata_mutex);
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_LED_IDX];
+ unsigned long flags;
+
+ command %= 16;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x01;
+ packet->data[1] = 0x03;
+ packet->data[2] = command;
+ packet->len = 3;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0x40 + command;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
}
+
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
+/*
+ * Light up the segment corresponding to the pad number on
+ * Xbox 360 Controllers.
+ */
+static void xpad_identify_controller(struct usb_xpad *xpad)
+{
+ led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
}
static void xpad_led_set(struct led_classdev *led_cdev,
@@ -888,41 +1425,45 @@ static void xpad_led_set(struct led_classdev *led_cdev,
static int xpad_led_probe(struct usb_xpad *xpad)
{
- static atomic_t led_seq = ATOMIC_INIT(0);
- long led_no;
struct xpad_led *led;
struct led_classdev *led_cdev;
int error;
- if (xpad->xtype != XTYPE_XBOX360)
+ if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
return 0;
xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
if (!led)
return -ENOMEM;
- led_no = (long)atomic_inc_return(&led_seq) - 1;
+ xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
+ if (xpad->pad_nr < 0) {
+ error = xpad->pad_nr;
+ goto err_free_mem;
+ }
- snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
+ snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
led->xpad = xpad;
led_cdev = &led->led_cdev;
led_cdev->name = led->name;
led_cdev->brightness_set = xpad_led_set;
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
error = led_classdev_register(&xpad->udev->dev, led_cdev);
- if (error) {
- kfree(led);
- xpad->led = NULL;
- return error;
- }
+ if (error)
+ goto err_free_id;
- /*
- * Light up the segment corresponding to controller number
- */
- xpad_send_led_command(xpad, (led_no % 4) + 2);
+ xpad_identify_controller(xpad);
return 0;
+
+err_free_id:
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+err_free_mem:
+ kfree(led);
+ xpad->led = NULL;
+ return error;
}
static void xpad_led_disconnect(struct usb_xpad *xpad)
@@ -931,6 +1472,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
if (xpad_led) {
led_classdev_unregister(&xpad_led->led_cdev);
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
kfree(xpad_led);
}
}
@@ -939,44 +1481,108 @@ static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
static void xpad_led_disconnect(struct usb_xpad *xpad) { }
#endif
-
-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
-
- /* URB was submitted in probe */
- if (xpad->xtype == XTYPE_XBOX360W)
- return 0;
+ int error;
- xpad->irq_in->dev = xpad->udev;
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;
if (xpad->xtype == XTYPE_XBOXONE) {
- /* Xbox one controller needs to be initialized. */
- xpad->odata[0] = 0x05;
- xpad->odata[1] = 0x20;
- xpad->irq_out->transfer_buffer_length = 2;
- return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ error = xpad_start_xbox_one(xpad);
+ if (error) {
+ usb_kill_urb(xpad->irq_in);
+ return error;
+ }
}
return 0;
}
-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
+ usb_kill_urb(xpad->irq_in);
+}
+
+static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out poweroff now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
- if (xpad->xtype != XTYPE_XBOX360W)
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+ int error;
+
+ error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ if (error)
+ return -EIO;
+
+ /*
+ * Send presence packet.
+ * This will force the controller to resend connection packets.
+ * This is useful in the case we activate the module after the
+ * adapter has been plugged in, as it won't automatically
+ * send us info about the controllers.
+ */
+ error = xpad_inquiry_pad_presence(xpad);
+ if (error) {
usb_kill_urb(xpad->irq_in);
+ return error;
+ }
- xpad_stop_output(xpad);
+ return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+ usb_kill_urb(xpad->irq_in);
+
+ /* Make sure we are done with presence work if it was scheduled */
+ flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ xpad_stop_input(xpad);
}
static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
struct usb_xpad *xpad = input_get_drvdata(input_dev);
- set_bit(abs, input_dev->absbit);
switch (abs) {
case ABS_X:
@@ -996,16 +1602,125 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
+ default:
+ input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+ break;
+ }
+}
+
+static void xpad_deinit_input(struct usb_xpad *xpad)
+{
+ if (xpad->input_created) {
+ xpad->input_created = false;
+ xpad_led_disconnect(xpad);
+ input_unregister_device(xpad->dev);
+ }
+}
+
+static int xpad_init_input(struct usb_xpad *xpad)
+{
+ struct input_dev *input_dev;
+ int i, error;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ xpad->dev = input_dev;
+ input_dev->name = xpad->name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(xpad->udev, &input_dev->id);
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /* x360w controllers and the receiver have different ids */
+ input_dev->id.product = 0x02a1;
+ }
+
+ input_dev->dev.parent = &xpad->intf->dev;
+
+ input_set_drvdata(input_dev, xpad);
+
+ if (xpad->xtype != XTYPE_XBOX360W) {
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+ }
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ }
+
+ /* set up standard buttons */
+ for (i = 0; xpad_common_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
+
+ /* set up model-specific ones */
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
+ for (i = 0; xpad360_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
+ } else {
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
+ }
+
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_pad[i]);
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ }
+
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_triggers[i]);
+ } else {
+ for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}
+
+ error = xpad_init_ff(xpad);
+ if (error)
+ goto err_free_input;
+
+ error = xpad_led_probe(xpad);
+ if (error)
+ goto err_destroy_ff;
+
+ error = input_register_device(xpad->dev);
+ if (error)
+ goto err_disconnect_led;
+
+ xpad->input_created = true;
+ return 0;
+
+err_disconnect_led:
+ xpad_led_disconnect(xpad);
+err_destroy_ff:
+ input_ff_destroy(input_dev);
+err_free_input:
+ input_free_device(input_dev);
+ return error;
}
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
- struct input_dev *input_dev;
- struct usb_endpoint_descriptor *ep_irq_in;
- int ep_irq_in_idx;
+ struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
int i, error;
if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -1017,49 +1732,44 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
break;
}
- if (xpad_device[i].xtype == XTYPE_XBOXONE &&
- intf->cur_altsetting->desc.bInterfaceNumber != 0) {
- /*
- * The Xbox One controller lists three interfaces all with the
- * same interface class, subclass and protocol. Differentiate by
- * interface number.
- */
- return -ENODEV;
- }
-
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!xpad || !input_dev) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad)
+ return -ENOMEM;
+
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata) {
error = -ENOMEM;
- goto fail1;
+ goto err_free_mem;
}
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_in) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_idata;
}
xpad->udev = udev;
xpad->intf = intf;
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
+ xpad->name = xpad_device[i].name;
+ INIT_WORK(&xpad->work, xpad_presence_work);
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
xpad->xtype = XTYPE_XBOX360W;
+ else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208)
+ xpad->xtype = XTYPE_XBOXONE;
else
xpad->xtype = XTYPE_XBOX360;
- } else
+ } else {
xpad->xtype = XTYPE_XBOX;
+ }
if (dpad_to_buttons)
xpad->mapping |= MAP_DPAD_TO_BUTTONS;
@@ -1069,74 +1779,39 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->mapping |= MAP_STICKS_TO_NULL;
}
- xpad->dev = input_dev;
- usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
- strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
- input_dev->name = xpad_device[i].name;
- input_dev->phys = xpad->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->dev.parent = &intf->dev;
-
- input_set_drvdata(input_dev, xpad);
-
- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
-
- if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
- input_dev->evbit[0] |= BIT_MASK(EV_ABS);
- /* set up axes */
- for (i = 0; xpad_abs[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs[i]);
+ if (xpad->xtype == XTYPE_XBOXONE &&
+ intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ /*
+ * The Xbox One controller lists three interfaces all with the
+ * same interface class, subclass and protocol. Differentiate by
+ * interface number.
+ */
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- /* set up standard buttons */
- for (i = 0; xpad_common_btn[i] >= 0; i++)
- __set_bit(xpad_common_btn[i], input_dev->keybit);
+ ep_irq_in = ep_irq_out = NULL;
- /* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
- xpad->xtype == XTYPE_XBOXONE) {
- for (i = 0; xpad360_btn[i] >= 0; i++)
- __set_bit(xpad360_btn[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_btn[i] >= 0; i++)
- __set_bit(xpad_btn[i], input_dev->keybit);
- }
+ for (i = 0; i < 2; i++) {
+ struct usb_endpoint_descriptor *ep =
+ &intf->cur_altsetting->endpoint[i].desc;
- if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- __set_bit(xpad_btn_pad[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ if (usb_endpoint_xfer_int(ep)) {
+ if (usb_endpoint_dir_in(ep))
+ ep_irq_in = ep;
+ else
+ ep_irq_out = ep;
+ }
}
- if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
- for (i = 0; xpad_btn_triggers[i] >= 0; i++)
- __set_bit(xpad_btn_triggers[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_triggers[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+ if (!ep_irq_in || !ep_irq_out) {
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- error = xpad_init_output(intf, xpad);
+ error = xpad_init_output(intf, xpad, ep_irq_out);
if (error)
- goto fail3;
-
- error = xpad_init_ff(xpad);
- if (error)
- goto fail4;
-
- error = xpad_led_probe(xpad);
- if (error)
- goto fail5;
-
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
- ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+ goto err_free_in_urb;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -1145,59 +1820,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- error = input_register_device(xpad->dev);
- if (error)
- goto fail6;
-
usb_set_intfdata(intf, xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
- /*
- * Setup the message to set the LEDs on the
- * controller when it shows up
- */
- xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->bulk_out) {
- error = -ENOMEM;
- goto fail7;
- }
-
- xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
- if (!xpad->bdata) {
- error = -ENOMEM;
- goto fail8;
- }
-
- xpad->bdata[2] = 0x08;
- switch (intf->cur_altsetting->desc.bInterfaceNumber) {
- case 0:
- xpad->bdata[3] = 0x42;
- break;
- case 2:
- xpad->bdata[3] = 0x43;
- break;
- case 4:
- xpad->bdata[3] = 0x44;
- break;
- case 6:
- xpad->bdata[3] = 0x45;
- }
-
- ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
- if (usb_endpoint_is_bulk_out(ep_irq_in)) {
- usb_fill_bulk_urb(xpad->bulk_out, udev,
- usb_sndbulkpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad);
- } else {
- usb_fill_int_urb(xpad->bulk_out, udev,
- usb_sndintpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad, 0);
- }
-
/*
* Submit the int URB immediately rather than waiting for open
* because we get status messages from the device whether
@@ -1205,58 +1830,127 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
* exactly the message that a controller has arrived that
* we're waiting for.
*/
- xpad->irq_in->dev = xpad->udev;
- error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ error = xpad360w_start_input(xpad);
if (error)
- goto fail9;
+ goto err_deinit_output;
+ /*
+ * Wireless controllers require RESET_RESUME to work properly
+ * after suspend. Ideally this quirk should be in usb core
+ * quirk list, but we have too many vendors producing these
+ * controllers and we'd need to maintain 2 identical lists
+ * here in this driver and in usb core.
+ */
+ udev->quirks |= USB_QUIRK_RESET_RESUME;
+ } else {
+ error = xpad_init_input(xpad);
+ if (error)
+ goto err_deinit_output;
}
-
return 0;
- fail9: kfree(xpad->bdata);
- fail8: usb_free_urb(xpad->bulk_out);
- fail7: input_unregister_device(input_dev);
- input_dev = NULL;
- fail6: xpad_led_disconnect(xpad);
- fail5: if (input_dev)
- input_ff_destroy(input_dev);
- fail4: xpad_deinit_output(xpad);
- fail3: usb_free_urb(xpad->irq_in);
- fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- fail1: input_free_device(input_dev);
+err_deinit_output:
+ xpad_deinit_output(xpad);
+err_free_in_urb:
+ usb_free_urb(xpad->irq_in);
+err_free_idata:
+ usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+err_free_mem:
kfree(xpad);
return error;
-
}
static void xpad_disconnect(struct usb_interface *intf)
{
- struct usb_xpad *xpad = usb_get_intfdata (intf);
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
- xpad_led_disconnect(xpad);
- input_unregister_device(xpad->dev);
- xpad_deinit_output(xpad);
+ if (xpad->xtype == XTYPE_XBOX360W)
+ xpad360w_stop_input(xpad);
- if (xpad->xtype == XTYPE_XBOX360W) {
- usb_kill_urb(xpad->bulk_out);
- usb_free_urb(xpad->bulk_out);
- usb_kill_urb(xpad->irq_in);
- }
+ xpad_deinit_input(xpad);
+
+ /*
+ * Now that both input device and LED device are gone we can
+ * stop output URB.
+ */
+ xpad_stop_output(xpad);
+
+ xpad_deinit_output(xpad);
usb_free_urb(xpad->irq_in);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);
- kfree(xpad->bdata);
kfree(xpad);
usb_set_intfdata(intf, NULL);
}
+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /*
+ * Wireless controllers always listen to input so
+ * they are notified when controller shows up
+ * or goes away.
+ */
+ xpad360w_stop_input(xpad);
+
+ /*
+ * The wireless adapter is going off now, so the
+ * gamepads are going to become disconnected.
+ * Unless explicitly disabled, power them down
+ * so they don't just sit there flashing.
+ */
+ if (auto_poweroff && xpad->pad_present)
+ xpad360w_poweroff_controller(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users)
+ xpad_stop_input(xpad);
+ mutex_unlock(&input->mutex);
+ }
+
+ xpad_stop_output(xpad);
+
+ return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+ int retval = 0;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ retval = xpad360w_start_input(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users) {
+ retval = xpad_start_input(xpad);
+ } else if (xpad->xtype == XTYPE_XBOXONE) {
+ /*
+ * Even if there are no users, we'll send Xbox One pads
+ * the startup sequence so they don't sit there and
+ * blink until somebody opens the input device again.
+ */
+ retval = xpad_start_xbox_one(xpad);
+ }
+ mutex_unlock(&input->mutex);
+ }
+
+ return retval;
+}
+
static struct usb_driver xpad_driver = {
.name = "xpad",
.probe = xpad_probe,
.disconnect = xpad_disconnect,
+ .suspend = xpad_suspend,
+ .resume = xpad_resume,
+ .reset_resume = xpad_resume,
.id_table = xpad_table,
};
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 063898d429c7..b5304e264881 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1871,7 +1871,7 @@ static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id)
static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
{
- static atomic_t device_no = ATOMIC_INIT(0);
+ static atomic_t device_no = ATOMIC_INIT(-1);
const struct ims_pcu_device_info *info;
int error;
@@ -1902,7 +1902,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
}
/* Device appears to be operable, complete initialization */
- pcu->device_no = atomic_inc_return(&device_no) - 1;
+ pcu->device_no = atomic_inc_return(&device_no);
/*
* PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index d399b8b0f000..a05a5179da32 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -514,7 +514,7 @@ static void serio_release_port(struct device *dev)
*/
static void serio_init_port(struct serio *serio)
{
- static atomic_t serio_no = ATOMIC_INIT(0);
+ static atomic_t serio_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
@@ -525,7 +525,7 @@ static void serio_init_port(struct serio *serio)
mutex_init(&serio->drv_mutex);
device_initialize(&serio->dev);
dev_set_name(&serio->dev, "serio%lu",
- (unsigned long)atomic_inc_return(&serio_no) - 1);
+ (unsigned long)atomic_inc_return(&serio_no));
serio->dev.bus = &serio_bus;
serio->dev.release = serio_release_port;
serio->dev.groups = serio_device_attr_groups;
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index c9a02fe57576..71ef5d65a0c6 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -292,7 +292,7 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
{
- static atomic_t serio_raw_no = ATOMIC_INIT(0);
+ static atomic_t serio_raw_no = ATOMIC_INIT(-1);
struct serio_raw *serio_raw;
int err;
@@ -303,7 +303,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
}
snprintf(serio_raw->name, sizeof(serio_raw->name),
- "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
+ "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
kref_init(&serio_raw->kref);
INIT_LIST_HEAD(&serio_raw->client_list);
init_waitqueue_head(&serio_raw->wait);
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 85db2a5e7878..f78577693937 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -343,6 +343,34 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
}
EXPORT_SYMBOL_GPL(can_put_echo_skb);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb = priv->echo_skb[idx];
+ struct canfd_frame *cf;
+
+ if (idx >= priv->echo_skb_max) {
+ netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
+ __func__, idx, priv->echo_skb_max);
+ return NULL;
+ }
+
+ if (!skb) {
+ netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n",
+ __func__, idx);
+ return NULL;
+ }
+
+ /* Using "struct canfd_frame::len" for the frame
+ * length is supported on both CAN and CANFD frames.
+ */
+ cf = (struct canfd_frame *)skb->data;
+ *len_ptr = cf->len;
+ priv->echo_skb[idx] = NULL;
+
+ return skb;
+}
+
/*
* Get the skb from the stack and loop it back locally
*
@@ -352,22 +380,16 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
*/
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
{
- struct can_priv *priv = netdev_priv(dev);
-
- BUG_ON(idx >= priv->echo_skb_max);
-
- if (priv->echo_skb[idx]) {
- struct sk_buff *skb = priv->echo_skb[idx];
- struct can_frame *cf = (struct can_frame *)skb->data;
- u8 dlc = cf->can_dlc;
+ struct sk_buff *skb;
+ u8 len;
- netif_rx(priv->echo_skb[idx]);
- priv->echo_skb[idx] = NULL;
+ skb = __can_get_echo_skb(dev, idx, &len);
+ if (!skb)
+ return 0;
- return dlc;
- }
+ netif_rx(skb);
- return 0;
+ return len;
}
EXPORT_SYMBOL_GPL(can_get_echo_skb);
diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c
index 9e0ca3048657..a5ac992670e8 100644
--- a/drivers/net/wireless/cw1200/wsm.c
+++ b/drivers/net/wireless/cw1200/wsm.c
@@ -1807,16 +1807,18 @@ static int wsm_buf_reserve(struct wsm_buf *buf, size_t extra_size)
{
size_t pos = buf->data - buf->begin;
size_t size = pos + extra_size;
+ u8 *tmp;
size = round_up(size, FWLOAD_BLOCK_SIZE);
- buf->begin = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
- if (buf->begin) {
- buf->data = &buf->begin[pos];
- buf->end = &buf->begin[size];
- return 0;
- } else {
- buf->end = buf->data = buf->begin;
+ tmp = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
+ if (!tmp) {
+ wsm_buf_deinit(buf);
return -ENOMEM;
}
+
+ buf->begin = tmp;
+ buf->data = &buf->begin[pos];
+ buf->end = &buf->begin[size];
+ return 0;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7bc28c8d2832..4bd4f185102e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -687,6 +687,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
srb_t *sp;
int rval;
+ if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (ha->flags.eeh_busy) {
if (ha->flags.pci_channel_io_perm_failure) {
ql_dbg(ql_dbg_aer, vha, 0x9010,
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 42c459a9d3fe..ce5234555cc9 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -45,6 +45,7 @@
#define QUERY_DESC_MIN_SIZE 2
#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18
#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
@@ -383,7 +384,7 @@ struct utp_cmd_rsp {
__be32 residual_transfer_count;
__be32 reserved[4];
__be16 sense_data_len;
- u8 sense_data[18];
+ u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
};
/**
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 39a4e61bf8d2..e8f3033d991b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -570,6 +570,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
start:
switch (hba->clk_gating.state) {
case CLKS_ON:
+ /*
+ * Wait for the ungate work to complete if in progress.
+ * Though the clocks may be in ON state, the link could
+ * still be in hibner8 state if hibern8 is allowed
+ * during clock gating.
+ * Make sure we exit hibern8 state also in addition to
+ * clocks being ON.
+ */
+ if (ufshcd_can_hibern8_during_gating(hba) &&
+ ufshcd_is_link_hibern8(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ flush_work(&hba->clk_gating.ungate_work);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ goto start;
+ }
break;
case REQ_CLKS_OFF:
if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
@@ -796,10 +811,14 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
int len;
if (lrbp->sense_buffer &&
ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
+ int len_to_copy;
+
len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
+ len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len);
+
memcpy(lrbp->sense_buffer,
lrbp->ucd_rsp_ptr->sr.sense_data,
- min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+ min_t(int, len_to_copy, SCSI_SENSE_BUFFERSIZE));
}
}
@@ -5161,7 +5180,10 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
int ufshcd_system_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered || pm_runtime_suspended(hba->dev))
/*
* Let the runtime resume take care of resuming
* if runtime suspended.
@@ -5182,7 +5204,10 @@ EXPORT_SYMBOL(ufshcd_system_resume);
*/
int ufshcd_runtime_suspend(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
return ufshcd_suspend(hba, UFS_RUNTIME_PM);
@@ -5212,10 +5237,13 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
*/
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
- else
- return ufshcd_resume(hba, UFS_RUNTIME_PM);
+
+ return ufshcd_resume(hba, UFS_RUNTIME_PM);
}
EXPORT_SYMBOL(ufshcd_runtime_resume);
@@ -5378,15 +5406,47 @@ static int ufshcd_devfreq_target(struct device *dev,
{
int err = 0;
struct ufs_hba *hba = dev_get_drvdata(dev);
+ bool release_clk_hold = false;
+ unsigned long irq_flags;
if (!ufshcd_is_clkscaling_enabled(hba))
return -EINVAL;
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (ufshcd_eh_in_progress(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+
+ if (ufshcd_is_clkgating_allowed(hba) &&
+ (hba->clk_gating.state != CLKS_ON)) {
+ if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
+ /* hold the vote until the scaling work is completed */
+ hba->clk_gating.active_reqs++;
+ release_clk_hold = true;
+ hba->clk_gating.state = CLKS_ON;
+ } else {
+ /*
+ * Clock gating work seems to be running in parallel
+ * hence skip scaling work to avoid deadlock between
+ * current scaling work and gating work.
+ */
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
if (*freq == UINT_MAX)
err = ufshcd_scale_clks(hba, true);
else if (*freq == 0)
err = ufshcd_scale_clks(hba, false);
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (release_clk_hold)
+ __ufshcd_release(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
return err;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f53682bb30cf..4d46a1cb851b 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -188,15 +188,29 @@ static int receive_room(struct tty_struct *tty)
return left;
}
+/* If we are not echoing the data, perhaps this is a secret so erase it */
+static inline void zero_buffer(struct tty_struct *tty, u8 *buffer, int size)
+{
+ bool icanon = !!L_ICANON(tty);
+ bool no_echo = !L_ECHO(tty);
+
+ if (icanon && no_echo)
+ memset(buffer, 0x00, size);
+}
+
static inline int tty_copy_to_user(struct tty_struct *tty,
void __user *to,
- const void *from,
+ void *from,
unsigned long n)
{
struct n_tty_data *ldata = tty->disc_data;
+ int retval;
tty_audit_add_data(tty, from, n, ldata->icanon);
- return copy_to_user(to, from, n);
+ retval = copy_to_user(to, from, n);
+ if (!retval)
+ zero_buffer(tty, from, n);
+ return retval;
}
/**
@@ -2006,6 +2020,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
+ zero_buffer(tty, read_buf_addr(ldata, tail), n);
ldata->read_tail += n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 143deb62467d..0d3fc2dae23a 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -415,6 +415,8 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
disc->ops->receive_buf(tty, p, f, count);
}
head->read += count;
+ if (count > 0)
+ memset(p, 0, count);
return count;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9a47a9c8ebb4..2391dac86c58 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2765,7 +2765,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
- usb_clear_port_feature(hub->hdev, port1,
+
+ if (udev)
+ usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
/*
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 4f1151088ebe..cfe4cf6486af 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -75,15 +75,6 @@ static inline int dt_type(struct p9_wstat *mistat)
return rettype;
}
-static void p9stat_init(struct p9_wstat *stbuf)
-{
- stbuf->name = NULL;
- stbuf->uid = NULL;
- stbuf->gid = NULL;
- stbuf->muid = NULL;
- stbuf->extension = NULL;
-}
-
/**
* v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
* @filp: opened file structure
@@ -136,12 +127,10 @@ static int v9fs_dir_readdir(struct file *file, struct dir_context *ctx)
rdir->tail = err;
}
while (rdir->head < rdir->tail) {
- p9stat_init(&st);
err = p9stat_read(fid->clnt, rdir->buf + rdir->head,
rdir->tail - rdir->head, &st);
if (err) {
p9_debug(P9_DEBUG_VFS, "returned %d\n", err);
- p9stat_free(&st);
return -EIO;
}
reclen = st.size+2;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 90bc079d9982..0ee38b284ad7 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -349,7 +349,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
s->s_magic = BFS_MAGIC;
- if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
+ if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) ||
+ le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) {
printf("Superblock is corrupted\n");
goto out1;
}
@@ -358,9 +359,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
sizeof(struct bfs_inode)
+ BFS_ROOT_INO - 1;
imap_len = (info->si_lasti / 8) + 1;
- info->si_imap = kzalloc(imap_len, GFP_KERNEL);
- if (!info->si_imap)
+ info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN);
+ if (!info->si_imap) {
+ printf("Cannot allocate %u bytes\n", imap_len);
goto out1;
+ }
for (i = 0; i < BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index a4569cafa3bb..a65ef669618a 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -71,13 +71,13 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
if (!sdp)
return NULL;
- sb->s_fs_info = sdp;
sdp->sd_vfs = sb;
sdp->sd_lkstats = alloc_percpu(struct gfs2_pcpu_lkstats);
if (!sdp->sd_lkstats) {
kfree(sdp);
return NULL;
}
+ sb->s_fs_info = sdp;
set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
gfs2_tune_init(&sdp->sd_tune);
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 49093889362c..45c2668ea0d8 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -148,6 +148,7 @@ void can_bus_off(struct net_device *dev);
void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
unsigned int idx);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr);
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
void can_free_echo_skb(struct net_device *dev, unsigned int idx);
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 681c8b42e013..1c6b7055f11f 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -215,7 +215,7 @@ static char *kdb_read(char *buffer, size_t bufsize)
int count;
int i;
int diag, dtab_count;
- int key;
+ int key, buf_size, ret;
diag = kdbgetintenv("DTABCOUNT", &dtab_count);
@@ -335,9 +335,8 @@ poll_again:
else
p_tmp = tmpbuffer;
len = strlen(p_tmp);
- count = kallsyms_symbol_complete(p_tmp,
- sizeof(tmpbuffer) -
- (p_tmp - tmpbuffer));
+ buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer);
+ count = kallsyms_symbol_complete(p_tmp, buf_size);
if (tab == 2 && count > 0) {
kdb_printf("\n%d symbols are found.", count);
if (count > dtab_count) {
@@ -349,9 +348,13 @@ poll_again:
}
kdb_printf("\n");
for (i = 0; i < count; i++) {
- if (WARN_ON(!kallsyms_symbol_next(p_tmp, i)))
+ ret = kallsyms_symbol_next(p_tmp, i, buf_size);
+ if (WARN_ON(!ret))
break;
- kdb_printf("%s ", p_tmp);
+ if (ret != -E2BIG)
+ kdb_printf("%s ", p_tmp);
+ else
+ kdb_printf("%s... ", p_tmp);
*(p_tmp + len) = '\0';
}
if (i >= dtab_count)
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 7afd3c8c41d5..439f1c8b1193 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -83,7 +83,7 @@ typedef struct __ksymtab {
unsigned long sym_start;
unsigned long sym_end;
} kdb_symtab_t;
-extern int kallsyms_symbol_next(char *prefix_name, int flag);
+extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size);
extern int kallsyms_symbol_complete(char *prefix_name, int max_len);
/* Exported Symbols for kernel loadable modules to use. */
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index d35cc2d3a4cc..2aed4a33521b 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len)
* Parameters:
* prefix_name prefix of a symbol name to lookup
* flag 0 means search from the head, 1 means continue search.
+ * buf_size maximum length that can be written to prefix_name
+ * buffer
* Returns:
* 1 if a symbol matches the given prefix.
* 0 if no string found
*/
-int kallsyms_symbol_next(char *prefix_name, int flag)
+int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size)
{
int prefix_len = strlen(prefix_name);
static loff_t pos;
@@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag)
pos = 0;
while ((name = kdb_walk_kallsyms(&pos))) {
- if (strncmp(name, prefix_name, prefix_len) == 0) {
- strncpy(prefix_name, name, strlen(name)+1);
- return 1;
- }
+ if (!strncmp(name, prefix_name, prefix_len))
+ return strscpy(prefix_name, name, buf_size);
}
return 0;
}
diff --git a/mm/shmem.c b/mm/shmem.c
index 371d5eca80ed..64c33e3dbe69 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1805,9 +1805,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence)
mutex_lock(&inode->i_mutex);
/* We're holding i_mutex so we can access i_size directly */
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
+ if (offset < 0 || offset >= inode->i_size)
offset = -ENXIO;
else {
start = offset >> PAGE_CACHE_SHIFT;
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 12cbc988f4fb..ee7bedf89b7f 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -726,7 +726,6 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
struct sk_buff *skb = NULL;
struct sock *sk = sock->sk;
struct llc_sock *llc = llc_sk(sk);
- unsigned long cpu_flags;
size_t copied = 0;
u32 peek_seq = 0;
u32 *seq, skb_len;
@@ -852,9 +851,8 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
goto copy_uaddr;
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
@@ -875,9 +873,8 @@ copy_uaddr:
llc_cmsg_rcv(msg, skb);
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 16911a84f850..03689b97ea78 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -487,8 +487,9 @@ void sctp_assoc_set_primary(struct sctp_association *asoc,
void sctp_assoc_rm_peer(struct sctp_association *asoc,
struct sctp_transport *peer)
{
- struct list_head *pos;
- struct sctp_transport *transport;
+ struct sctp_transport *transport;
+ struct list_head *pos;
+ struct sctp_chunk *ch;
pr_debug("%s: association:%p addr:%pISpc\n",
__func__, asoc, &peer->ipaddr.sa);
@@ -544,7 +545,6 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
*/
if (!list_empty(&peer->transmitted)) {
struct sctp_transport *active = asoc->peer.active_path;
- struct sctp_chunk *ch;
/* Reset the transport of each chunk on this list */
list_for_each_entry(ch, &peer->transmitted,
@@ -566,6 +566,10 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
sctp_transport_hold(active);
}
+ list_for_each_entry(ch, &asoc->outqueue.out_chunk_list, list)
+ if (ch->transport == peer)
+ ch->transport = NULL;
+
asoc->peer.transport_count--;
sctp_transport_free(peer);
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..42e93bf496e7 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -272,13 +272,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred)
{
struct auth_cred *acred = &container_of(cred, struct generic_cred,
gc_base)->acred;
- bool ret;
-
- get_rpccred(cred);
- ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
- put_rpccred(cred);
-
- return ret;
+ return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
}
static const struct rpc_credops generic_credops = {
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 1bd4ba6b6aa4..23d6b4c7eafe 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -980,6 +980,7 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
unsigned int hash;
struct unix_address *addr;
struct hlist_head *list;
+ struct path path = { NULL, NULL };
err = -EINVAL;
if (sunaddr->sun_family != AF_UNIX)
@@ -995,9 +996,20 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
goto out;
addr_len = err;
+ if (sun_path[0]) {
+ umode_t mode = S_IFSOCK |
+ (SOCK_INODE(sock)->i_mode & ~current_umask());
+ err = unix_mknod(sun_path, mode, &path);
+ if (err) {
+ if (err == -EEXIST)
+ err = -EADDRINUSE;
+ goto out;
+ }
+ }
+
err = mutex_lock_interruptible(&u->readlock);
if (err)
- goto out;
+ goto out_put;
err = -EINVAL;
if (u->addr)
@@ -1014,16 +1026,6 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
atomic_set(&addr->refcnt, 1);
if (sun_path[0]) {
- struct path path;
- umode_t mode = S_IFSOCK |
- (SOCK_INODE(sock)->i_mode & ~current_umask());
- err = unix_mknod(sun_path, mode, &path);
- if (err) {
- if (err == -EEXIST)
- err = -EADDRINUSE;
- unix_release_addr(addr);
- goto out_up;
- }
addr->hash = UNIX_HASH_SIZE;
hash = d_backing_inode(path.dentry)->i_ino & (UNIX_HASH_SIZE-1);
spin_lock(&unix_table_lock);
@@ -1050,6 +1052,9 @@ out_unlock:
spin_unlock(&unix_table_lock);
out_up:
mutex_unlock(&u->readlock);
+out_put:
+ if (err)
+ path_put(&path);
out:
return err;
}
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 3.18.128
Date: Sun, 2 Dec 2018 08:34:43 +0100 [thread overview]
Message-ID: <20181202073443.GB32143@kroah.com> (raw)
In-Reply-To: <20181202073436.GA32143@kroah.com>
diff --git a/Makefile b/Makefile
index 7c78eb797de8..9060189af162 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
-SUBLEVEL = 127
+SUBLEVEL = 128
EXTRAVERSION =
NAME = Diseased Newt
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 37c4fd6aeb7a..42065599d014 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,7 +10,7 @@
#
# Copyright (C) 1995-2001 by Russell King
-LDFLAGS_vmlinux :=-p --no-undefined -X
+LDFLAGS_vmlinux :=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b9d1dfdbe5bb..ae9d3bf79612 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1479,7 +1479,7 @@ static long vphn_get_associativity(unsigned long cpu,
switch (rc) {
case H_FUNCTION:
- printk(KERN_INFO
+ printk_once(KERN_INFO
"VPHN is not supported. Disabling polling...\n");
stop_topology_update();
break;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index c2d30765bf3d..a4ede00483d1 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -105,8 +105,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
/* Ensure the arm clock divider is what we expect */
ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
+ int ret1;
+
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
- regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ if (ret1)
+ dev_warn(cpu_dev,
+ "failed to restore vddarm voltage: %d\n", ret1);
return ret;
}
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 9a32d9dfdd26..011700262824 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = {
MODULE_DEVICE_TABLE(pci, pciidlist);
+static void ast_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+ bool primary = false;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+ primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+ remove_conflicting_framebuffers(ap, "astdrmfb", primary);
+ kfree(ap);
+}
+
static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ ast_kick_out_firmware_fb(pdev);
+
return drm_get_pci_dev(pdev, ent, &driver);
}
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 9dc0fd5c1ea4..a43d81b6d5d1 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -549,6 +549,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc,
}
ast_bo_unreserve(bo);
+ ast_set_offset_reg(crtc);
ast_set_start_address_crt1(crtc, (u32)gpu_addr);
return 0;
@@ -1246,7 +1247,7 @@ static int ast_cursor_move(struct drm_crtc *crtc,
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
/* dummy write to fire HWC */
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00);
+ ast_show_cursor(crtc);
return 0;
}
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index e29c04e2aff4..e853a2134680 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -527,14 +527,14 @@ EXPORT_SYMBOL(gameport_set_phys);
*/
static void gameport_init_port(struct gameport *gameport)
{
- static atomic_t gameport_no = ATOMIC_INIT(0);
+ static atomic_t gameport_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
mutex_init(&gameport->drv_mutex);
device_initialize(&gameport->dev);
dev_set_name(&gameport->dev, "gameport%lu",
- (unsigned long)atomic_inc_return(&gameport_no) - 1);
+ (unsigned long)atomic_inc_return(&gameport_no));
gameport->dev.bus = &gameport_bus;
gameport->dev.release = gameport_release_port;
if (gameport->parent)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 1a728f310b27..2e52015634f9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -31,12 +31,14 @@
* - the iForce driver drivers/char/joystick/iforce.c
* - the skeleton-driver drivers/usb/usb-skeleton.c
* - Xbox 360 information http://www.free60.org/wiki/Gamepad
+ * - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
*
* Thanks to:
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
* - XBOX Linux project - extra USB id's
+ * - Pekka P�yry (quantus) - Xbox One controller reverse engineering
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -74,18 +76,23 @@
*/
#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
+#include <linux/usb/quirks.h>
#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
#define DRIVER_DESC "X-Box pad driver"
-#define XPAD_PKT_LEN 32
+#define XPAD_PKT_LEN 64
-/* xbox d-pads should map to buttons, as is required for DDR pads
- but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
#define MAP_DPAD_TO_BUTTONS (1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
@@ -110,6 +117,10 @@ static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
+static bool auto_poweroff = true;
+module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");
+
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
@@ -117,42 +128,77 @@ static const struct xpad_device {
u8 mapping;
u8 xtype;
} xpad_device[] = {
+ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+ { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+ { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
- { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+ { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
- { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
- { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+ { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
+ { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
+ { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
+ { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+ { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+ { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
+ { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
+ { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
+ { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -160,32 +206,66 @@ static const struct xpad_device {
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
+ { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+ { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
+ { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -193,24 +273,67 @@ static const struct xpad_device {
{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -241,7 +364,6 @@ static const signed short xpad_btn_triggers[] = {
-1
};
-
static const signed short xpad360_btn[] = { /* buttons for x360 controller */
BTN_TL, BTN_TR, /* Button LB/RB */
BTN_MODE, /* The big X button */
@@ -272,15 +394,15 @@ static const signed short xpad_abs_triggers[] = {
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
* wireless controllers have protocol 129.
*/
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (vend), \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
.bInterfaceSubClass = 93, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -290,51 +412,175 @@ static const signed short xpad_abs_triggers[] = {
.bInterfaceSubClass = 71, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
- { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+ { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
-static struct usb_device_id xpad_table[] = {
+static const struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
+ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 Controller */
XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
+ XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */
+ XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
+ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
+ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
+ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
- XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
- XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
- XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
+ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
+ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
{ }
};
MODULE_DEVICE_TABLE(usb, xpad_table);
+struct xboxone_init_packet {
+ u16 idVendor;
+ u16 idProduct;
+ const u8 *data;
+ u8 len;
+};
+
+#define XBOXONE_INIT_PKT(_vid, _pid, _data) \
+ { \
+ .idVendor = (_vid), \
+ .idProduct = (_pid), \
+ .data = (_data), \
+ .len = ARRAY_SIZE(_data), \
+ }
+
+
+/*
+ * This packet is required for all Xbox One pads with 2015
+ * or later firmware installed (or present from the factory).
+ */
+static const u8 xboxone_fw2015_init[] = {
+ 0x05, 0x20, 0x00, 0x01, 0x00
+};
+
+/*
+ * This packet is required for the Titanfall 2 Xbox One pads
+ * (0x0e6f:0x0165) to finish initialization and for Hori pads
+ * (0x0f0d:0x0067) to make the analog sticks work.
+ */
+static const u8 xboxone_hori_init[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a,
+ 0x00, 0x00, 0x00, 0x80, 0x00
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init1[] = {
+ 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init2[] = {
+ 0x06, 0x20, 0x00, 0x02, 0x01, 0x00
+};
+
+/*
+ * A specific rumble packet is required for some PowerA pads to start
+ * sending input reports. One of those pads is (0x24c6:0x543a).
+ */
+static const u8 xboxone_rumblebegin_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x1D, 0x1D, 0xFF, 0x00, 0x00
+};
+
+/*
+ * A rumble packet with zero FF intensity will immediately
+ * terminate the rumbling required to init PowerA pads.
+ * This should happen fast enough that the motors don't
+ * spin up to enough speed to actually vibrate the gamepad.
+ */
+static const u8 xboxone_rumbleend_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+/*
+ * This specifies the selection of init packets that a gamepad
+ * will be sent on init *and* the order in which they will be
+ * sent. The correct sequence number will be added when the
+ * packet is going to be sent.
+ */
+static const struct xboxone_init_packet xboxone_init_packets[] = {
+ XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
+};
+
+struct xpad_output_packet {
+ u8 data[XPAD_PKT_LEN];
+ u8 len;
+ bool pending;
+};
+
+#define XPAD_OUT_CMD_IDX 0
+#define XPAD_OUT_FF_IDX 1
+#define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
+#define XPAD_NUM_OUT_PACKETS (1 + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))
+
struct usb_xpad {
struct input_dev *dev; /* input device interface */
+ struct input_dev __rcu *x360w_dev;
struct usb_device *udev; /* usb device */
struct usb_interface *intf; /* usb interface */
- int pad_present;
+ bool pad_present;
+ bool input_created;
struct urb *irq_in; /* urb for interrupt in report */
unsigned char *idata; /* input data */
dma_addr_t idata_dma;
- struct urb *bulk_out;
- unsigned char *bdata;
-
struct urb *irq_out; /* urb for interrupt out report */
+ struct usb_anchor irq_out_anchor;
+ bool irq_out_active; /* we must not use an active URB */
+ u8 odata_serial; /* serial number for xbox one protocol */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
- struct mutex odata_mutex;
+ spinlock_t odata_lock;
+
+ struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
+ int last_out_packet;
+ int init_seq;
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -344,8 +590,15 @@ struct usb_xpad {
int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
+ int pad_nr; /* the order x360 pads were attached */
+ const char *name; /* name of the device */
+ struct work_struct work; /* init/remove device from callback */
};
+static int xpad_init_input(struct usb_xpad *xpad);
+static void xpad_deinit_input(struct usb_xpad *xpad);
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
+
/*
* xpad_process_packet
*
@@ -355,7 +608,6 @@ struct usb_xpad {
* The used report descriptor was taken from ITO Takayukis website:
* http://euc.jp/periphs/xbox-controller.ja.html
*/
-
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
struct input_dev *dev = xpad->dev;
@@ -426,10 +678,12 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
* http://www.free60.org/wiki/Gamepad
*/
-static void xpad360_process_packet(struct usb_xpad *xpad,
+static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
u16 cmd, unsigned char *data)
{
- struct input_dev *dev = xpad->dev;
+ /* valid pad data */
+ if (data[0] != 0x00)
+ return;
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
@@ -438,7 +692,16 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
- } else {
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
input_report_abs(dev, ABS_HAT0X,
!!(data[2] & 0x08) - !!(data[2] & 0x04));
input_report_abs(dev, ABS_HAT0Y,
@@ -488,6 +751,31 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_sync(dev);
}
+static void xpad_presence_work(struct work_struct *work)
+{
+ struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
+ int error;
+
+ if (xpad->pad_present) {
+ error = xpad_init_input(xpad);
+ if (error) {
+ /* complain only, not much else we can do here */
+ dev_err(&xpad->dev->dev,
+ "unable to init device: %d\n", error);
+ } else {
+ rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
+ }
+ } else {
+ RCU_INIT_POINTER(xpad->x360w_dev, NULL);
+ synchronize_rcu();
+ /*
+ * Now that we are sure xpad360w_process_packet is not
+ * using input device we can get rid of it.
+ */
+ xpad_deinit_input(xpad);
+ }
+}
+
/*
* xpad360w_process_packet
*
@@ -502,34 +790,63 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
* 01.1 - Pad state (Bytes 4+) valid
*
*/
-
static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev;
+ bool present;
+
/* Presence change */
if (data[0] & 0x08) {
- if (data[1] & 0x80) {
- xpad->pad_present = 1;
- usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
- } else
- xpad->pad_present = 0;
+ present = (data[1] & 0x80) != 0;
+
+ if (xpad->pad_present != present) {
+ xpad->pad_present = present;
+ schedule_work(&xpad->work);
+ }
}
/* Valid pad data */
- if (!(data[1] & 0x1))
+ if (data[1] != 0x1)
return;
- xpad360_process_packet(xpad, cmd, &data[4]);
+ rcu_read_lock();
+ dev = rcu_dereference(xpad->x360w_dev);
+ if (dev)
+ xpad360_process_packet(xpad, dev, cmd, &data[4]);
+ rcu_read_unlock();
}
/*
- * xpadone_process_buttons
+ * xpadone_process_packet
*
- * Process a button update packet from an Xbox one controller.
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
+ *
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
*/
-static void xpadone_process_buttons(struct usb_xpad *xpad,
- struct input_dev *dev,
- unsigned char *data)
+static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev = xpad->dev;
+
+ /* the xbox button has its own special report */
+ if (data[0] == 0X07) {
+ /*
+ * The Xbox One S controller requires these reports to be
+ * acked otherwise it continues sending them forever and
+ * won't report further mode button events.
+ */
+ if (data[1] == 0x30)
+ xpadone_ack_mode_report(xpad, data[2]);
+
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ return;
+ }
+ /* check invalid packet */
+ else if (data[0] != 0X20)
+ return;
+
/* menu/view buttons */
input_report_key(dev, BTN_START, data[4] & 0x04);
input_report_key(dev, BTN_SELECT, data[4] & 0x08);
@@ -592,34 +909,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad,
input_sync(dev);
}
-/*
- * xpadone_process_packet
- *
- * Completes a request by converting the data into events for the
- * input subsystem. This version is for the Xbox One controller.
- *
- * The report format was gleaned from
- * https://github.com/kylelemons/xbox/blob/master/xbox.go
- */
-
-static void xpadone_process_packet(struct usb_xpad *xpad,
- u16 cmd, unsigned char *data)
-{
- struct input_dev *dev = xpad->dev;
-
- switch (data[0]) {
- case 0x20:
- xpadone_process_buttons(xpad, dev, data);
- break;
-
- case 0x07:
- /* the xbox button has its own special report */
- input_report_key(dev, BTN_MODE, data[4] & 0x01);
- input_sync(dev);
- break;
- }
-}
-
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -647,7 +936,7 @@ static void xpad_irq_in(struct urb *urb)
switch (xpad->xtype) {
case XTYPE_XBOX360:
- xpad360_process_packet(xpad, 0, xpad->idata);
+ xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
break;
case XTYPE_XBOX360W:
xpad360w_process_packet(xpad, 0, xpad->idata);
@@ -666,40 +955,109 @@ exit:
__func__, retval);
}
-static void xpad_bulk_out(struct urb *urb)
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = urb->context;
- struct device *dev = &xpad->intf->dev;
+ const struct xboxone_init_packet *init_packet;
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n",
- __func__, urb->status);
- break;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n",
- __func__, urb->status);
+ if (xpad->xtype != XTYPE_XBOXONE)
+ return false;
+
+ /* Perform initialization sequence for Xbox One pads that require it */
+ while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
+ init_packet = &xboxone_init_packets[xpad->init_seq++];
+
+ if (init_packet->idVendor != 0 &&
+ init_packet->idVendor != xpad->dev->id.vendor)
+ continue;
+
+ if (init_packet->idProduct != 0 &&
+ init_packet->idProduct != xpad->dev->id.product)
+ continue;
+
+ /* This packet applies to our device, so prepare to send it */
+ memcpy(xpad->odata, init_packet->data, init_packet->len);
+ xpad->irq_out->transfer_buffer_length = init_packet->len;
+
+ /* Update packet with current sequence number */
+ xpad->odata[2] = xpad->odata_serial++;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *pkt, *packet = NULL;
+ int i;
+
+ /* We may have init packets to send before we can send user commands */
+ if (xpad_prepare_next_init_packet(xpad))
+ return true;
+
+ for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
+ if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
+ xpad->last_out_packet = 0;
+
+ pkt = &xpad->out_packets[xpad->last_out_packet];
+ if (pkt->pending) {
+ dev_dbg(&xpad->intf->dev,
+ "%s - found pending output packet %d\n",
+ __func__, xpad->last_out_packet);
+ packet = pkt;
+ break;
+ }
+ }
+
+ if (packet) {
+ memcpy(xpad->odata, packet->data, packet->len);
+ xpad->irq_out->transfer_buffer_length = packet->len;
+ packet->pending = false;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
+{
+ int error;
+
+ if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
+ error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+ if (error) {
+ dev_err(&xpad->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(xpad->irq_out);
+ return -EIO;
+ }
+
+ xpad->irq_out_active = true;
}
+
+ return 0;
}
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
struct device *dev = &xpad->intf->dev;
- int retval, status;
+ int status = urb->status;
+ int error;
+ unsigned long flags;
- status = urb->status;
+ spin_lock_irqsave(&xpad->odata_lock, flags);
switch (status) {
case 0:
/* success */
- return;
+ xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
+ break;
case -ECONNRESET:
case -ENOENT:
@@ -707,49 +1065,53 @@ static void xpad_irq_out(struct urb *urb)
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, status);
- return;
+ xpad->irq_out_active = false;
+ break;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, status);
- goto exit;
+ break;
}
-exit:
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
- __func__, retval);
+ if (xpad->irq_out_active) {
+ usb_anchor_urb(urb, &xpad->irq_out_anchor);
+ error = usb_submit_urb(urb, GFP_ATOMIC);
+ if (error) {
+ dev_err(dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(urb);
+ xpad->irq_out_active = false;
+ }
+ }
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
}
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
+ struct usb_endpoint_descriptor *ep_irq_out)
{
- struct usb_endpoint_descriptor *ep_irq_out;
- int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
+ init_usb_anchor(&xpad->irq_out_anchor);
+
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
- if (!xpad->odata) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad->odata)
+ return -ENOMEM;
- mutex_init(&xpad->odata_mutex);
+ spin_lock_init(&xpad->odata_lock);
xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_out) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_coherent;
}
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
- ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
-
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -759,14 +1121,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
return 0;
- fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
- fail1: return error;
+err_free_coherent:
+ usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ return error;
}
static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_UNKNOWN)
- usb_kill_urb(xpad->irq_out);
+ if (xpad->xtype != XTYPE_UNKNOWN) {
+ if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+ 5000)) {
+ dev_warn(&xpad->intf->dev,
+ "timed out waiting for output URB to complete, killing\n");
+ usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+ }
+ }
}
static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -778,72 +1147,179 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
}
}
+static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x08;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out presence first */
+ xpad->last_out_packet = -1;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static int xpad_start_xbox_one(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ /*
+ * Begin the init sequence by attempting to send a packet.
+ * We will cycle through the init packet sequence before
+ * sending any packets from the output ring.
+ */
+ xpad->init_seq = 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ static const u8 mode_report_ack[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->len = sizeof(mode_report_ack);
+ memcpy(packet->data, mode_report_ack, packet->len);
+ packet->data[2] = seq_num;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out the ack now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct usb_xpad *xpad = input_get_drvdata(dev);
+ struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
+ __u16 strong;
+ __u16 weak;
+ int retval;
+ unsigned long flags;
- if (effect->type == FF_RUMBLE) {
- __u16 strong = effect->u.rumble.strong_magnitude;
- __u16 weak = effect->u.rumble.weak_magnitude;
-
- switch (xpad->xtype) {
-
- case XTYPE_XBOX:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x06;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator */
- xpad->odata[4] = 0x00;
- xpad->odata[5] = weak / 256; /* right actuator */
- xpad->irq_out->transfer_buffer_length = 6;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x08;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator? */
- xpad->odata[4] = weak / 256; /* right actuator? */
- xpad->odata[5] = 0x00;
- xpad->odata[6] = 0x00;
- xpad->odata[7] = 0x00;
- xpad->irq_out->transfer_buffer_length = 8;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360W:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x01;
- xpad->odata[2] = 0x0F;
- xpad->odata[3] = 0xC0;
- xpad->odata[4] = 0x00;
- xpad->odata[5] = strong / 256;
- xpad->odata[6] = weak / 256;
- xpad->odata[7] = 0x00;
- xpad->odata[8] = 0x00;
- xpad->odata[9] = 0x00;
- xpad->odata[10] = 0x00;
- xpad->odata[11] = 0x00;
- xpad->irq_out->transfer_buffer_length = 12;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- default:
- dev_dbg(&xpad->dev->dev,
- "%s - rumble command sent to unsupported xpad type: %d\n",
- __func__, xpad->xtype);
- return -1;
- }
+ if (effect->type != FF_RUMBLE)
+ return 0;
+
+ strong = effect->u.rumble.strong_magnitude;
+ weak = effect->u.rumble.weak_magnitude;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x06;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator */
+ packet->data[4] = 0x00;
+ packet->data[5] = weak / 256; /* right actuator */
+ packet->len = 6;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x08;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator? */
+ packet->data[4] = weak / 256; /* right actuator? */
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->len = 8;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x01;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = strong / 256;
+ packet->data[6] = weak / 256;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOXONE:
+ packet->data[0] = 0x09; /* activate rumble */
+ packet->data[1] = 0x00;
+ packet->data[2] = xpad->odata_serial++;
+ packet->data[3] = 0x09;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x0F;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = strong / 512; /* left actuator */
+ packet->data[9] = weak / 512; /* right actuator */
+ packet->data[10] = 0xFF; /* on period */
+ packet->data[11] = 0x00; /* off period */
+ packet->data[12] = 0xFF; /* repeat count */
+ packet->len = 13;
+ packet->pending = true;
+ break;
+
+ default:
+ dev_dbg(&xpad->dev->dev,
+ "%s - rumble command sent to unsupported xpad type: %d\n",
+ __func__, xpad->xtype);
+ retval = -EINVAL;
+ goto out;
}
- return 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+out:
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+ return retval;
}
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
+ if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -857,6 +1333,9 @@ static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
#include <linux/leds.h>
+#include <linux/idr.h>
+
+static DEFINE_IDA(xpad_pad_seq);
struct xpad_led {
char name[16];
@@ -864,17 +1343,75 @@ struct xpad_led {
struct usb_xpad *xpad;
};
+/**
+ * set the LEDs on Xbox360 / Wireless Controllers
+ * @param command
+ * 0: off
+ * 1: all blink, then previous setting
+ * 2: 1/top-left blink, then on
+ * 3: 2/top-right blink, then on
+ * 4: 3/bottom-left blink, then on
+ * 5: 4/bottom-right blink, then on
+ * 6: 1/top-left on
+ * 7: 2/top-right on
+ * 8: 3/bottom-left on
+ * 9: 4/bottom-right on
+ * 10: rotate
+ * 11: blink, based on previous setting
+ * 12: slow blink, based on previous setting
+ * 13: rotate with two lights
+ * 14: persistent slow all blink
+ * 15: blink once, then previous setting
+ */
static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
- if (command >= 0 && command < 14) {
- mutex_lock(&xpad->odata_mutex);
- xpad->odata[0] = 0x01;
- xpad->odata[1] = 0x03;
- xpad->odata[2] = command;
- xpad->irq_out->transfer_buffer_length = 3;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
- mutex_unlock(&xpad->odata_mutex);
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_LED_IDX];
+ unsigned long flags;
+
+ command %= 16;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x01;
+ packet->data[1] = 0x03;
+ packet->data[2] = command;
+ packet->len = 3;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0x40 + command;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
}
+
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
+/*
+ * Light up the segment corresponding to the pad number on
+ * Xbox 360 Controllers.
+ */
+static void xpad_identify_controller(struct usb_xpad *xpad)
+{
+ led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
}
static void xpad_led_set(struct led_classdev *led_cdev,
@@ -888,41 +1425,45 @@ static void xpad_led_set(struct led_classdev *led_cdev,
static int xpad_led_probe(struct usb_xpad *xpad)
{
- static atomic_t led_seq = ATOMIC_INIT(0);
- long led_no;
struct xpad_led *led;
struct led_classdev *led_cdev;
int error;
- if (xpad->xtype != XTYPE_XBOX360)
+ if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
return 0;
xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
if (!led)
return -ENOMEM;
- led_no = (long)atomic_inc_return(&led_seq) - 1;
+ xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
+ if (xpad->pad_nr < 0) {
+ error = xpad->pad_nr;
+ goto err_free_mem;
+ }
- snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
+ snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
led->xpad = xpad;
led_cdev = &led->led_cdev;
led_cdev->name = led->name;
led_cdev->brightness_set = xpad_led_set;
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
error = led_classdev_register(&xpad->udev->dev, led_cdev);
- if (error) {
- kfree(led);
- xpad->led = NULL;
- return error;
- }
+ if (error)
+ goto err_free_id;
- /*
- * Light up the segment corresponding to controller number
- */
- xpad_send_led_command(xpad, (led_no % 4) + 2);
+ xpad_identify_controller(xpad);
return 0;
+
+err_free_id:
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+err_free_mem:
+ kfree(led);
+ xpad->led = NULL;
+ return error;
}
static void xpad_led_disconnect(struct usb_xpad *xpad)
@@ -931,6 +1472,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
if (xpad_led) {
led_classdev_unregister(&xpad_led->led_cdev);
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
kfree(xpad_led);
}
}
@@ -939,44 +1481,108 @@ static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
static void xpad_led_disconnect(struct usb_xpad *xpad) { }
#endif
-
-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
-
- /* URB was submitted in probe */
- if (xpad->xtype == XTYPE_XBOX360W)
- return 0;
+ int error;
- xpad->irq_in->dev = xpad->udev;
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;
if (xpad->xtype == XTYPE_XBOXONE) {
- /* Xbox one controller needs to be initialized. */
- xpad->odata[0] = 0x05;
- xpad->odata[1] = 0x20;
- xpad->irq_out->transfer_buffer_length = 2;
- return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ error = xpad_start_xbox_one(xpad);
+ if (error) {
+ usb_kill_urb(xpad->irq_in);
+ return error;
+ }
}
return 0;
}
-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
+ usb_kill_urb(xpad->irq_in);
+}
+
+static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out poweroff now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
- if (xpad->xtype != XTYPE_XBOX360W)
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+ int error;
+
+ error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ if (error)
+ return -EIO;
+
+ /*
+ * Send presence packet.
+ * This will force the controller to resend connection packets.
+ * This is useful in the case we activate the module after the
+ * adapter has been plugged in, as it won't automatically
+ * send us info about the controllers.
+ */
+ error = xpad_inquiry_pad_presence(xpad);
+ if (error) {
usb_kill_urb(xpad->irq_in);
+ return error;
+ }
- xpad_stop_output(xpad);
+ return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+ usb_kill_urb(xpad->irq_in);
+
+ /* Make sure we are done with presence work if it was scheduled */
+ flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ xpad_stop_input(xpad);
}
static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
struct usb_xpad *xpad = input_get_drvdata(input_dev);
- set_bit(abs, input_dev->absbit);
switch (abs) {
case ABS_X:
@@ -996,16 +1602,125 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
+ default:
+ input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+ break;
+ }
+}
+
+static void xpad_deinit_input(struct usb_xpad *xpad)
+{
+ if (xpad->input_created) {
+ xpad->input_created = false;
+ xpad_led_disconnect(xpad);
+ input_unregister_device(xpad->dev);
+ }
+}
+
+static int xpad_init_input(struct usb_xpad *xpad)
+{
+ struct input_dev *input_dev;
+ int i, error;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ xpad->dev = input_dev;
+ input_dev->name = xpad->name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(xpad->udev, &input_dev->id);
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /* x360w controllers and the receiver have different ids */
+ input_dev->id.product = 0x02a1;
+ }
+
+ input_dev->dev.parent = &xpad->intf->dev;
+
+ input_set_drvdata(input_dev, xpad);
+
+ if (xpad->xtype != XTYPE_XBOX360W) {
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+ }
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ }
+
+ /* set up standard buttons */
+ for (i = 0; xpad_common_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
+
+ /* set up model-specific ones */
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
+ for (i = 0; xpad360_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
+ } else {
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
+ }
+
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_pad[i]);
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ }
+
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_triggers[i]);
+ } else {
+ for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}
+
+ error = xpad_init_ff(xpad);
+ if (error)
+ goto err_free_input;
+
+ error = xpad_led_probe(xpad);
+ if (error)
+ goto err_destroy_ff;
+
+ error = input_register_device(xpad->dev);
+ if (error)
+ goto err_disconnect_led;
+
+ xpad->input_created = true;
+ return 0;
+
+err_disconnect_led:
+ xpad_led_disconnect(xpad);
+err_destroy_ff:
+ input_ff_destroy(input_dev);
+err_free_input:
+ input_free_device(input_dev);
+ return error;
}
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
- struct input_dev *input_dev;
- struct usb_endpoint_descriptor *ep_irq_in;
- int ep_irq_in_idx;
+ struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
int i, error;
if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -1017,49 +1732,44 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
break;
}
- if (xpad_device[i].xtype == XTYPE_XBOXONE &&
- intf->cur_altsetting->desc.bInterfaceNumber != 0) {
- /*
- * The Xbox One controller lists three interfaces all with the
- * same interface class, subclass and protocol. Differentiate by
- * interface number.
- */
- return -ENODEV;
- }
-
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!xpad || !input_dev) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad)
+ return -ENOMEM;
+
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata) {
error = -ENOMEM;
- goto fail1;
+ goto err_free_mem;
}
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_in) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_idata;
}
xpad->udev = udev;
xpad->intf = intf;
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
+ xpad->name = xpad_device[i].name;
+ INIT_WORK(&xpad->work, xpad_presence_work);
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
xpad->xtype = XTYPE_XBOX360W;
+ else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208)
+ xpad->xtype = XTYPE_XBOXONE;
else
xpad->xtype = XTYPE_XBOX360;
- } else
+ } else {
xpad->xtype = XTYPE_XBOX;
+ }
if (dpad_to_buttons)
xpad->mapping |= MAP_DPAD_TO_BUTTONS;
@@ -1069,74 +1779,39 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->mapping |= MAP_STICKS_TO_NULL;
}
- xpad->dev = input_dev;
- usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
- strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
- input_dev->name = xpad_device[i].name;
- input_dev->phys = xpad->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->dev.parent = &intf->dev;
-
- input_set_drvdata(input_dev, xpad);
-
- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
-
- if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
- input_dev->evbit[0] |= BIT_MASK(EV_ABS);
- /* set up axes */
- for (i = 0; xpad_abs[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs[i]);
+ if (xpad->xtype == XTYPE_XBOXONE &&
+ intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ /*
+ * The Xbox One controller lists three interfaces all with the
+ * same interface class, subclass and protocol. Differentiate by
+ * interface number.
+ */
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- /* set up standard buttons */
- for (i = 0; xpad_common_btn[i] >= 0; i++)
- __set_bit(xpad_common_btn[i], input_dev->keybit);
+ ep_irq_in = ep_irq_out = NULL;
- /* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
- xpad->xtype == XTYPE_XBOXONE) {
- for (i = 0; xpad360_btn[i] >= 0; i++)
- __set_bit(xpad360_btn[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_btn[i] >= 0; i++)
- __set_bit(xpad_btn[i], input_dev->keybit);
- }
+ for (i = 0; i < 2; i++) {
+ struct usb_endpoint_descriptor *ep =
+ &intf->cur_altsetting->endpoint[i].desc;
- if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- __set_bit(xpad_btn_pad[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ if (usb_endpoint_xfer_int(ep)) {
+ if (usb_endpoint_dir_in(ep))
+ ep_irq_in = ep;
+ else
+ ep_irq_out = ep;
+ }
}
- if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
- for (i = 0; xpad_btn_triggers[i] >= 0; i++)
- __set_bit(xpad_btn_triggers[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_triggers[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+ if (!ep_irq_in || !ep_irq_out) {
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- error = xpad_init_output(intf, xpad);
+ error = xpad_init_output(intf, xpad, ep_irq_out);
if (error)
- goto fail3;
-
- error = xpad_init_ff(xpad);
- if (error)
- goto fail4;
-
- error = xpad_led_probe(xpad);
- if (error)
- goto fail5;
-
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
- ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+ goto err_free_in_urb;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -1145,59 +1820,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- error = input_register_device(xpad->dev);
- if (error)
- goto fail6;
-
usb_set_intfdata(intf, xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
- /*
- * Setup the message to set the LEDs on the
- * controller when it shows up
- */
- xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->bulk_out) {
- error = -ENOMEM;
- goto fail7;
- }
-
- xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
- if (!xpad->bdata) {
- error = -ENOMEM;
- goto fail8;
- }
-
- xpad->bdata[2] = 0x08;
- switch (intf->cur_altsetting->desc.bInterfaceNumber) {
- case 0:
- xpad->bdata[3] = 0x42;
- break;
- case 2:
- xpad->bdata[3] = 0x43;
- break;
- case 4:
- xpad->bdata[3] = 0x44;
- break;
- case 6:
- xpad->bdata[3] = 0x45;
- }
-
- ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
- if (usb_endpoint_is_bulk_out(ep_irq_in)) {
- usb_fill_bulk_urb(xpad->bulk_out, udev,
- usb_sndbulkpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad);
- } else {
- usb_fill_int_urb(xpad->bulk_out, udev,
- usb_sndintpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad, 0);
- }
-
/*
* Submit the int URB immediately rather than waiting for open
* because we get status messages from the device whether
@@ -1205,58 +1830,127 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
* exactly the message that a controller has arrived that
* we're waiting for.
*/
- xpad->irq_in->dev = xpad->udev;
- error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ error = xpad360w_start_input(xpad);
if (error)
- goto fail9;
+ goto err_deinit_output;
+ /*
+ * Wireless controllers require RESET_RESUME to work properly
+ * after suspend. Ideally this quirk should be in usb core
+ * quirk list, but we have too many vendors producing these
+ * controllers and we'd need to maintain 2 identical lists
+ * here in this driver and in usb core.
+ */
+ udev->quirks |= USB_QUIRK_RESET_RESUME;
+ } else {
+ error = xpad_init_input(xpad);
+ if (error)
+ goto err_deinit_output;
}
-
return 0;
- fail9: kfree(xpad->bdata);
- fail8: usb_free_urb(xpad->bulk_out);
- fail7: input_unregister_device(input_dev);
- input_dev = NULL;
- fail6: xpad_led_disconnect(xpad);
- fail5: if (input_dev)
- input_ff_destroy(input_dev);
- fail4: xpad_deinit_output(xpad);
- fail3: usb_free_urb(xpad->irq_in);
- fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- fail1: input_free_device(input_dev);
+err_deinit_output:
+ xpad_deinit_output(xpad);
+err_free_in_urb:
+ usb_free_urb(xpad->irq_in);
+err_free_idata:
+ usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+err_free_mem:
kfree(xpad);
return error;
-
}
static void xpad_disconnect(struct usb_interface *intf)
{
- struct usb_xpad *xpad = usb_get_intfdata (intf);
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
- xpad_led_disconnect(xpad);
- input_unregister_device(xpad->dev);
- xpad_deinit_output(xpad);
+ if (xpad->xtype == XTYPE_XBOX360W)
+ xpad360w_stop_input(xpad);
- if (xpad->xtype == XTYPE_XBOX360W) {
- usb_kill_urb(xpad->bulk_out);
- usb_free_urb(xpad->bulk_out);
- usb_kill_urb(xpad->irq_in);
- }
+ xpad_deinit_input(xpad);
+
+ /*
+ * Now that both input device and LED device are gone we can
+ * stop output URB.
+ */
+ xpad_stop_output(xpad);
+
+ xpad_deinit_output(xpad);
usb_free_urb(xpad->irq_in);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);
- kfree(xpad->bdata);
kfree(xpad);
usb_set_intfdata(intf, NULL);
}
+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /*
+ * Wireless controllers always listen to input so
+ * they are notified when controller shows up
+ * or goes away.
+ */
+ xpad360w_stop_input(xpad);
+
+ /*
+ * The wireless adapter is going off now, so the
+ * gamepads are going to become disconnected.
+ * Unless explicitly disabled, power them down
+ * so they don't just sit there flashing.
+ */
+ if (auto_poweroff && xpad->pad_present)
+ xpad360w_poweroff_controller(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users)
+ xpad_stop_input(xpad);
+ mutex_unlock(&input->mutex);
+ }
+
+ xpad_stop_output(xpad);
+
+ return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+ int retval = 0;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ retval = xpad360w_start_input(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users) {
+ retval = xpad_start_input(xpad);
+ } else if (xpad->xtype == XTYPE_XBOXONE) {
+ /*
+ * Even if there are no users, we'll send Xbox One pads
+ * the startup sequence so they don't sit there and
+ * blink until somebody opens the input device again.
+ */
+ retval = xpad_start_xbox_one(xpad);
+ }
+ mutex_unlock(&input->mutex);
+ }
+
+ return retval;
+}
+
static struct usb_driver xpad_driver = {
.name = "xpad",
.probe = xpad_probe,
.disconnect = xpad_disconnect,
+ .suspend = xpad_suspend,
+ .resume = xpad_resume,
+ .reset_resume = xpad_resume,
.id_table = xpad_table,
};
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 063898d429c7..b5304e264881 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1871,7 +1871,7 @@ static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id)
static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
{
- static atomic_t device_no = ATOMIC_INIT(0);
+ static atomic_t device_no = ATOMIC_INIT(-1);
const struct ims_pcu_device_info *info;
int error;
@@ -1902,7 +1902,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
}
/* Device appears to be operable, complete initialization */
- pcu->device_no = atomic_inc_return(&device_no) - 1;
+ pcu->device_no = atomic_inc_return(&device_no);
/*
* PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index d399b8b0f000..a05a5179da32 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -514,7 +514,7 @@ static void serio_release_port(struct device *dev)
*/
static void serio_init_port(struct serio *serio)
{
- static atomic_t serio_no = ATOMIC_INIT(0);
+ static atomic_t serio_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
@@ -525,7 +525,7 @@ static void serio_init_port(struct serio *serio)
mutex_init(&serio->drv_mutex);
device_initialize(&serio->dev);
dev_set_name(&serio->dev, "serio%lu",
- (unsigned long)atomic_inc_return(&serio_no) - 1);
+ (unsigned long)atomic_inc_return(&serio_no));
serio->dev.bus = &serio_bus;
serio->dev.release = serio_release_port;
serio->dev.groups = serio_device_attr_groups;
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index c9a02fe57576..71ef5d65a0c6 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -292,7 +292,7 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
{
- static atomic_t serio_raw_no = ATOMIC_INIT(0);
+ static atomic_t serio_raw_no = ATOMIC_INIT(-1);
struct serio_raw *serio_raw;
int err;
@@ -303,7 +303,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
}
snprintf(serio_raw->name, sizeof(serio_raw->name),
- "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
+ "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
kref_init(&serio_raw->kref);
INIT_LIST_HEAD(&serio_raw->client_list);
init_waitqueue_head(&serio_raw->wait);
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 85db2a5e7878..f78577693937 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -343,6 +343,34 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
}
EXPORT_SYMBOL_GPL(can_put_echo_skb);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb = priv->echo_skb[idx];
+ struct canfd_frame *cf;
+
+ if (idx >= priv->echo_skb_max) {
+ netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
+ __func__, idx, priv->echo_skb_max);
+ return NULL;
+ }
+
+ if (!skb) {
+ netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n",
+ __func__, idx);
+ return NULL;
+ }
+
+ /* Using "struct canfd_frame::len" for the frame
+ * length is supported on both CAN and CANFD frames.
+ */
+ cf = (struct canfd_frame *)skb->data;
+ *len_ptr = cf->len;
+ priv->echo_skb[idx] = NULL;
+
+ return skb;
+}
+
/*
* Get the skb from the stack and loop it back locally
*
@@ -352,22 +380,16 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
*/
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
{
- struct can_priv *priv = netdev_priv(dev);
-
- BUG_ON(idx >= priv->echo_skb_max);
-
- if (priv->echo_skb[idx]) {
- struct sk_buff *skb = priv->echo_skb[idx];
- struct can_frame *cf = (struct can_frame *)skb->data;
- u8 dlc = cf->can_dlc;
+ struct sk_buff *skb;
+ u8 len;
- netif_rx(priv->echo_skb[idx]);
- priv->echo_skb[idx] = NULL;
+ skb = __can_get_echo_skb(dev, idx, &len);
+ if (!skb)
+ return 0;
- return dlc;
- }
+ netif_rx(skb);
- return 0;
+ return len;
}
EXPORT_SYMBOL_GPL(can_get_echo_skb);
diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c
index 9e0ca3048657..a5ac992670e8 100644
--- a/drivers/net/wireless/cw1200/wsm.c
+++ b/drivers/net/wireless/cw1200/wsm.c
@@ -1807,16 +1807,18 @@ static int wsm_buf_reserve(struct wsm_buf *buf, size_t extra_size)
{
size_t pos = buf->data - buf->begin;
size_t size = pos + extra_size;
+ u8 *tmp;
size = round_up(size, FWLOAD_BLOCK_SIZE);
- buf->begin = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
- if (buf->begin) {
- buf->data = &buf->begin[pos];
- buf->end = &buf->begin[size];
- return 0;
- } else {
- buf->end = buf->data = buf->begin;
+ tmp = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
+ if (!tmp) {
+ wsm_buf_deinit(buf);
return -ENOMEM;
}
+
+ buf->begin = tmp;
+ buf->data = &buf->begin[pos];
+ buf->end = &buf->begin[size];
+ return 0;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7bc28c8d2832..4bd4f185102e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -687,6 +687,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
srb_t *sp;
int rval;
+ if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (ha->flags.eeh_busy) {
if (ha->flags.pci_channel_io_perm_failure) {
ql_dbg(ql_dbg_aer, vha, 0x9010,
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 42c459a9d3fe..ce5234555cc9 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -45,6 +45,7 @@
#define QUERY_DESC_MIN_SIZE 2
#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18
#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
@@ -383,7 +384,7 @@ struct utp_cmd_rsp {
__be32 residual_transfer_count;
__be32 reserved[4];
__be16 sense_data_len;
- u8 sense_data[18];
+ u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
};
/**
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 39a4e61bf8d2..e8f3033d991b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -570,6 +570,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
start:
switch (hba->clk_gating.state) {
case CLKS_ON:
+ /*
+ * Wait for the ungate work to complete if in progress.
+ * Though the clocks may be in ON state, the link could
+ * still be in hibner8 state if hibern8 is allowed
+ * during clock gating.
+ * Make sure we exit hibern8 state also in addition to
+ * clocks being ON.
+ */
+ if (ufshcd_can_hibern8_during_gating(hba) &&
+ ufshcd_is_link_hibern8(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ flush_work(&hba->clk_gating.ungate_work);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ goto start;
+ }
break;
case REQ_CLKS_OFF:
if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
@@ -796,10 +811,14 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
int len;
if (lrbp->sense_buffer &&
ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
+ int len_to_copy;
+
len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
+ len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len);
+
memcpy(lrbp->sense_buffer,
lrbp->ucd_rsp_ptr->sr.sense_data,
- min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+ min_t(int, len_to_copy, SCSI_SENSE_BUFFERSIZE));
}
}
@@ -5161,7 +5180,10 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
int ufshcd_system_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered || pm_runtime_suspended(hba->dev))
/*
* Let the runtime resume take care of resuming
* if runtime suspended.
@@ -5182,7 +5204,10 @@ EXPORT_SYMBOL(ufshcd_system_resume);
*/
int ufshcd_runtime_suspend(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
return ufshcd_suspend(hba, UFS_RUNTIME_PM);
@@ -5212,10 +5237,13 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
*/
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
- else
- return ufshcd_resume(hba, UFS_RUNTIME_PM);
+
+ return ufshcd_resume(hba, UFS_RUNTIME_PM);
}
EXPORT_SYMBOL(ufshcd_runtime_resume);
@@ -5378,15 +5406,47 @@ static int ufshcd_devfreq_target(struct device *dev,
{
int err = 0;
struct ufs_hba *hba = dev_get_drvdata(dev);
+ bool release_clk_hold = false;
+ unsigned long irq_flags;
if (!ufshcd_is_clkscaling_enabled(hba))
return -EINVAL;
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (ufshcd_eh_in_progress(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+
+ if (ufshcd_is_clkgating_allowed(hba) &&
+ (hba->clk_gating.state != CLKS_ON)) {
+ if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
+ /* hold the vote until the scaling work is completed */
+ hba->clk_gating.active_reqs++;
+ release_clk_hold = true;
+ hba->clk_gating.state = CLKS_ON;
+ } else {
+ /*
+ * Clock gating work seems to be running in parallel
+ * hence skip scaling work to avoid deadlock between
+ * current scaling work and gating work.
+ */
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
if (*freq == UINT_MAX)
err = ufshcd_scale_clks(hba, true);
else if (*freq == 0)
err = ufshcd_scale_clks(hba, false);
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (release_clk_hold)
+ __ufshcd_release(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
return err;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f53682bb30cf..4d46a1cb851b 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -188,15 +188,29 @@ static int receive_room(struct tty_struct *tty)
return left;
}
+/* If we are not echoing the data, perhaps this is a secret so erase it */
+static inline void zero_buffer(struct tty_struct *tty, u8 *buffer, int size)
+{
+ bool icanon = !!L_ICANON(tty);
+ bool no_echo = !L_ECHO(tty);
+
+ if (icanon && no_echo)
+ memset(buffer, 0x00, size);
+}
+
static inline int tty_copy_to_user(struct tty_struct *tty,
void __user *to,
- const void *from,
+ void *from,
unsigned long n)
{
struct n_tty_data *ldata = tty->disc_data;
+ int retval;
tty_audit_add_data(tty, from, n, ldata->icanon);
- return copy_to_user(to, from, n);
+ retval = copy_to_user(to, from, n);
+ if (!retval)
+ zero_buffer(tty, from, n);
+ return retval;
}
/**
@@ -2006,6 +2020,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
+ zero_buffer(tty, read_buf_addr(ldata, tail), n);
ldata->read_tail += n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 143deb62467d..0d3fc2dae23a 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -415,6 +415,8 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
disc->ops->receive_buf(tty, p, f, count);
}
head->read += count;
+ if (count > 0)
+ memset(p, 0, count);
return count;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9a47a9c8ebb4..2391dac86c58 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2765,7 +2765,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
- usb_clear_port_feature(hub->hdev, port1,
+
+ if (udev)
+ usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
/*
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 4f1151088ebe..cfe4cf6486af 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -75,15 +75,6 @@ static inline int dt_type(struct p9_wstat *mistat)
return rettype;
}
-static void p9stat_init(struct p9_wstat *stbuf)
-{
- stbuf->name = NULL;
- stbuf->uid = NULL;
- stbuf->gid = NULL;
- stbuf->muid = NULL;
- stbuf->extension = NULL;
-}
-
/**
* v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
* @filp: opened file structure
@@ -136,12 +127,10 @@ static int v9fs_dir_readdir(struct file *file, struct dir_context *ctx)
rdir->tail = err;
}
while (rdir->head < rdir->tail) {
- p9stat_init(&st);
err = p9stat_read(fid->clnt, rdir->buf + rdir->head,
rdir->tail - rdir->head, &st);
if (err) {
p9_debug(P9_DEBUG_VFS, "returned %d\n", err);
- p9stat_free(&st);
return -EIO;
}
reclen = st.size+2;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 90bc079d9982..0ee38b284ad7 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -349,7 +349,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
s->s_magic = BFS_MAGIC;
- if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
+ if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) ||
+ le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) {
printf("Superblock is corrupted\n");
goto out1;
}
@@ -358,9 +359,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
sizeof(struct bfs_inode)
+ BFS_ROOT_INO - 1;
imap_len = (info->si_lasti / 8) + 1;
- info->si_imap = kzalloc(imap_len, GFP_KERNEL);
- if (!info->si_imap)
+ info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN);
+ if (!info->si_imap) {
+ printf("Cannot allocate %u bytes\n", imap_len);
goto out1;
+ }
for (i = 0; i < BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index a4569cafa3bb..a65ef669618a 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -71,13 +71,13 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
if (!sdp)
return NULL;
- sb->s_fs_info = sdp;
sdp->sd_vfs = sb;
sdp->sd_lkstats = alloc_percpu(struct gfs2_pcpu_lkstats);
if (!sdp->sd_lkstats) {
kfree(sdp);
return NULL;
}
+ sb->s_fs_info = sdp;
set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
gfs2_tune_init(&sdp->sd_tune);
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 49093889362c..45c2668ea0d8 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -148,6 +148,7 @@ void can_bus_off(struct net_device *dev);
void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
unsigned int idx);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr);
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
void can_free_echo_skb(struct net_device *dev, unsigned int idx);
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 681c8b42e013..1c6b7055f11f 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -215,7 +215,7 @@ static char *kdb_read(char *buffer, size_t bufsize)
int count;
int i;
int diag, dtab_count;
- int key;
+ int key, buf_size, ret;
diag = kdbgetintenv("DTABCOUNT", &dtab_count);
@@ -335,9 +335,8 @@ poll_again:
else
p_tmp = tmpbuffer;
len = strlen(p_tmp);
- count = kallsyms_symbol_complete(p_tmp,
- sizeof(tmpbuffer) -
- (p_tmp - tmpbuffer));
+ buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer);
+ count = kallsyms_symbol_complete(p_tmp, buf_size);
if (tab == 2 && count > 0) {
kdb_printf("\n%d symbols are found.", count);
if (count > dtab_count) {
@@ -349,9 +348,13 @@ poll_again:
}
kdb_printf("\n");
for (i = 0; i < count; i++) {
- if (WARN_ON(!kallsyms_symbol_next(p_tmp, i)))
+ ret = kallsyms_symbol_next(p_tmp, i, buf_size);
+ if (WARN_ON(!ret))
break;
- kdb_printf("%s ", p_tmp);
+ if (ret != -E2BIG)
+ kdb_printf("%s ", p_tmp);
+ else
+ kdb_printf("%s... ", p_tmp);
*(p_tmp + len) = '\0';
}
if (i >= dtab_count)
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 7afd3c8c41d5..439f1c8b1193 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -83,7 +83,7 @@ typedef struct __ksymtab {
unsigned long sym_start;
unsigned long sym_end;
} kdb_symtab_t;
-extern int kallsyms_symbol_next(char *prefix_name, int flag);
+extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size);
extern int kallsyms_symbol_complete(char *prefix_name, int max_len);
/* Exported Symbols for kernel loadable modules to use. */
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index d35cc2d3a4cc..2aed4a33521b 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len)
* Parameters:
* prefix_name prefix of a symbol name to lookup
* flag 0 means search from the head, 1 means continue search.
+ * buf_size maximum length that can be written to prefix_name
+ * buffer
* Returns:
* 1 if a symbol matches the given prefix.
* 0 if no string found
*/
-int kallsyms_symbol_next(char *prefix_name, int flag)
+int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size)
{
int prefix_len = strlen(prefix_name);
static loff_t pos;
@@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag)
pos = 0;
while ((name = kdb_walk_kallsyms(&pos))) {
- if (strncmp(name, prefix_name, prefix_len) == 0) {
- strncpy(prefix_name, name, strlen(name)+1);
- return 1;
- }
+ if (!strncmp(name, prefix_name, prefix_len))
+ return strscpy(prefix_name, name, buf_size);
}
return 0;
}
diff --git a/mm/shmem.c b/mm/shmem.c
index 371d5eca80ed..64c33e3dbe69 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1805,9 +1805,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence)
mutex_lock(&inode->i_mutex);
/* We're holding i_mutex so we can access i_size directly */
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
+ if (offset < 0 || offset >= inode->i_size)
offset = -ENXIO;
else {
start = offset >> PAGE_CACHE_SHIFT;
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 12cbc988f4fb..ee7bedf89b7f 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -726,7 +726,6 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
struct sk_buff *skb = NULL;
struct sock *sk = sock->sk;
struct llc_sock *llc = llc_sk(sk);
- unsigned long cpu_flags;
size_t copied = 0;
u32 peek_seq = 0;
u32 *seq, skb_len;
@@ -852,9 +851,8 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
goto copy_uaddr;
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
@@ -875,9 +873,8 @@ copy_uaddr:
llc_cmsg_rcv(msg, skb);
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 16911a84f850..03689b97ea78 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -487,8 +487,9 @@ void sctp_assoc_set_primary(struct sctp_association *asoc,
void sctp_assoc_rm_peer(struct sctp_association *asoc,
struct sctp_transport *peer)
{
- struct list_head *pos;
- struct sctp_transport *transport;
+ struct sctp_transport *transport;
+ struct list_head *pos;
+ struct sctp_chunk *ch;
pr_debug("%s: association:%p addr:%pISpc\n",
__func__, asoc, &peer->ipaddr.sa);
@@ -544,7 +545,6 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
*/
if (!list_empty(&peer->transmitted)) {
struct sctp_transport *active = asoc->peer.active_path;
- struct sctp_chunk *ch;
/* Reset the transport of each chunk on this list */
list_for_each_entry(ch, &peer->transmitted,
@@ -566,6 +566,10 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
sctp_transport_hold(active);
}
+ list_for_each_entry(ch, &asoc->outqueue.out_chunk_list, list)
+ if (ch->transport == peer)
+ ch->transport = NULL;
+
asoc->peer.transport_count--;
sctp_transport_free(peer);
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..42e93bf496e7 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -272,13 +272,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred)
{
struct auth_cred *acred = &container_of(cred, struct generic_cred,
gc_base)->acred;
- bool ret;
-
- get_rpccred(cred);
- ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
- put_rpccred(cred);
-
- return ret;
+ return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
}
static const struct rpc_credops generic_credops = {
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 1bd4ba6b6aa4..23d6b4c7eafe 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -980,6 +980,7 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
unsigned int hash;
struct unix_address *addr;
struct hlist_head *list;
+ struct path path = { NULL, NULL };
err = -EINVAL;
if (sunaddr->sun_family != AF_UNIX)
@@ -995,9 +996,20 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
goto out;
addr_len = err;
+ if (sun_path[0]) {
+ umode_t mode = S_IFSOCK |
+ (SOCK_INODE(sock)->i_mode & ~current_umask());
+ err = unix_mknod(sun_path, mode, &path);
+ if (err) {
+ if (err == -EEXIST)
+ err = -EADDRINUSE;
+ goto out;
+ }
+ }
+
err = mutex_lock_interruptible(&u->readlock);
if (err)
- goto out;
+ goto out_put;
err = -EINVAL;
if (u->addr)
@@ -1014,16 +1026,6 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
atomic_set(&addr->refcnt, 1);
if (sun_path[0]) {
- struct path path;
- umode_t mode = S_IFSOCK |
- (SOCK_INODE(sock)->i_mode & ~current_umask());
- err = unix_mknod(sun_path, mode, &path);
- if (err) {
- if (err == -EEXIST)
- err = -EADDRINUSE;
- unix_release_addr(addr);
- goto out_up;
- }
addr->hash = UNIX_HASH_SIZE;
hash = d_backing_inode(path.dentry)->i_ino & (UNIX_HASH_SIZE-1);
spin_lock(&unix_table_lock);
@@ -1050,6 +1052,9 @@ out_unlock:
spin_unlock(&unix_table_lock);
out_up:
mutex_unlock(&u->readlock);
+out_put:
+ if (err)
+ path_put(&path);
out:
return err;
}
next prev parent reply other threads:[~2018-12-02 7:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 7:34 Linux 3.18.128 Greg KH
2018-12-02 7:34 ` Greg KH [this message]
2018-12-02 7:34 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181202073443.GB32143@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.