* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: linux-arm-kernel Add support for a LVDS panel accessory kit consisting of: * AU Optronics G101EVN010 10.1 inches TFT-LCD display * Goodix GT911 capacitive touch controller This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Changes in v1 from initial changeset [1]: * Split configuration change into a different commit * Provide meaningful commit messages * Use the new DRM mxsfb driver for the AUO G101EVN010 panel [1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez at digi.com/ Alex Gonzalez (4): drm/panel: simple: Add AUO G101EVN010 panel support ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller .../bindings/display/panel/auo,g101evn010 | 12 +++++++ arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++ 4 files changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez Add support for a LVDS panel accessory kit consisting of: * AU Optronics G101EVN010 10.1 inches TFT-LCD display * Goodix GT911 capacitive touch controller This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Changes in v1 from initial changeset [1]: * Split configuration change into a different commit * Provide meaningful commit messages * Use the new DRM mxsfb driver for the AUO G101EVN010 panel [1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez@digi.com/ Alex Gonzalez (4): drm/panel: simple: Add AUO G101EVN010 panel support ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller .../bindings/display/panel/auo,g101evn010 | 12 +++++++ arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++ 4 files changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez Add support for a LVDS panel accessory kit consisting of: * AU Optronics G101EVN010 10.1 inches TFT-LCD display * Goodix GT911 capacitive touch controller This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Changes in v1 from initial changeset [1]: * Split configuration change into a different commit * Provide meaningful commit messages * Use the new DRM mxsfb driver for the AUO G101EVN010 panel [1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez@digi.com/ Alex Gonzalez (4): drm/panel: simple: Add AUO G101EVN010 panel support ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller .../bindings/display/panel/auo,g101evn010 | 12 +++++++ arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++ 4 files changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-25 15:09 ` Alex Gonzalez -1 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: linux-arm-kernel The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 97964f7f2ace..65a0dd166637 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = { }, }; +static const struct drm_display_mode auo_g101evn010_mode = { + .clock = 68930, + .hdisplay = 1280, + .hsync_start = 1280 + 82, + .hsync_end = 1280 + 82 + 2, + .htotal = 1280 + 82 + 2 + 84, + .vdisplay = 800, + .vsync_start = 800 + 8, + .vsync_end = 800 + 8 + 2, + .vtotal = 800 + 8 + 2 + 6, + .vrefresh = 60, +}; + +static const struct panel_desc auo_g101evn010 = { + .modes = &auo_g101evn010_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 216, + .height = 135, + }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, +}; + static const struct display_timing auo_g133han01_timings = { .pixelclock = { 134000000, 141200000, 149000000 }, .hactive = { 1920, 1920, 1920 }, @@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,g104sn02", .data = &auo_g104sn02, }, { + .compatible = "auo,g101evn010", + .data = &auo_g101evn010, + }, { .compatible = "auo,g133han01", .data = &auo_g133han01, }, { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 97964f7f2ace..65a0dd166637 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = { }, }; +static const struct drm_display_mode auo_g101evn010_mode = { + .clock = 68930, + .hdisplay = 1280, + .hsync_start = 1280 + 82, + .hsync_end = 1280 + 82 + 2, + .htotal = 1280 + 82 + 2 + 84, + .vdisplay = 800, + .vsync_start = 800 + 8, + .vsync_end = 800 + 8 + 2, + .vtotal = 800 + 8 + 2 + 6, + .vrefresh = 60, +}; + +static const struct panel_desc auo_g101evn010 = { + .modes = &auo_g101evn010_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 216, + .height = 135, + }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, +}; + static const struct display_timing auo_g133han01_timings = { .pixelclock = { 134000000, 141200000, 149000000 }, .hactive = { 1920, 1920, 1920 }, @@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,g104sn02", .data = &auo_g104sn02, }, { + .compatible = "auo,g101evn010", + .data = &auo_g101evn010, + }, { .compatible = "auo,g133han01", .data = &auo_g133han01, }, { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010 @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 97964f7f2ace..65a0dd166637 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = { }, }; +static const struct drm_display_mode auo_g101evn010_mode = { + .clock = 68930, + .hdisplay = 1280, + .hsync_start = 1280 + 82, + .hsync_end = 1280 + 82 + 2, + .htotal = 1280 + 82 + 2 + 84, + .vdisplay = 800, + .vsync_start = 800 + 8, + .vsync_end = 800 + 8 + 2, + .vtotal = 800 + 8 + 2 + 6, + .vrefresh = 60, +}; + +static const struct panel_desc auo_g101evn010 = { + .modes = &auo_g101evn010_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 216, + .height = 135, + }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, +}; + static const struct display_timing auo_g133han01_timings = { .pixelclock = { 134000000, 141200000, 149000000 }, .hactive = { 1920, 1920, 1920 }, @@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,g104sn02", .data = &auo_g104sn02, }, { + .compatible = "auo,g101evn010", + .data = &auo_g101evn010, + }, { .compatible = "auo,g133han01", .data = &auo_g133han01, }, { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-30 23:05 ` Rob Herring -1 siblings, 0 replies; 38+ messages in thread From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw) To: linux-arm-kernel On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote: > The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD > panel. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2018-10-30 23:05 ` Rob Herring 0 siblings, 0 replies; 38+ messages in thread From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw) To: Alex Gonzalez Cc: thierry.reding, airlied, dri-devel, shawnguo, robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote: > The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD > panel. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2018-10-30 23:05 ` Rob Herring 0 siblings, 0 replies; 38+ messages in thread From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw) Cc: thierry.reding, airlied, dri-devel, shawnguo, robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote: > The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD > panel. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support 2018-10-30 23:05 ` Rob Herring (?) (?) @ 2018-12-03 9:24 ` Gonzalez, Alex -1 siblings, 0 replies; 38+ messages in thread From: Gonzalez, Alex @ 2018-12-03 9:24 UTC (permalink / raw) To: Thierry Reding; +Cc: dri-devel@lists.freedesktop.org On Tue, Oct 30, 2018 at 11:05:19PM +0000, Rob Herring wrote: >On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote: >> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD >> panel. >> >> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> >> --- >> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ >> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ >> 2 files changed, 39 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 >> > >Reviewed-by: Rob Herring <robh@kernel.org> Ping? _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support 2018-10-25 15:09 ` Alex Gonzalez @ 2018-12-03 16:08 ` Thierry Reding -1 siblings, 0 replies; 38+ messages in thread From: Thierry Reding @ 2018-12-03 16:08 UTC (permalink / raw) To: Alex Gonzalez Cc: mark.rutland, devicetree, airlied, s.hauer, linux-kernel, dri-devel, robh+dt, linux-imx, kernel, fabio.estevam, shawnguo, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 895 bytes --] On Thu, Oct 25, 2018 at 05:09:30PM +0200, Alex Gonzalez wrote: > The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD > panel. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 Two things to keep in mind for next time: please split up DT bindings and driver changes into two separate patches (checkpatch.pl warns about this) and keep entries in panel-simple sorted alphabetically. I fixed the sorting myself and also added a .txt suffix to the DT binding documentation for consistency with other files in that directory. Applied to drm-misc-next, thanks. Thierry [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2018-12-03 16:08 ` Thierry Reding 0 siblings, 0 replies; 38+ messages in thread From: Thierry Reding @ 2018-12-03 16:08 UTC (permalink / raw) To: Alex Gonzalez Cc: airlied, dri-devel, shawnguo, robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 895 bytes --] On Thu, Oct 25, 2018 at 05:09:30PM +0200, Alex Gonzalez wrote: > The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD > panel. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++ > 2 files changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010 Two things to keep in mind for next time: please split up DT bindings and driver changes into two separate patches (checkpatch.pl warns about this) and keep entries in panel-simple sorted alphabetically. I fixed the sorting myself and also added a .txt suffix to the DT binding documentation for consistency with other files in that directory. Applied to drm-misc-next, thanks. Thierry [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-25 15:09 ` Alex Gonzalez -1 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: linux-arm-kernel This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 11966d12af76..f6e6b2cf780b 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -24,6 +24,18 @@ status = "okay"; }; + panel { + compatible = "auo,g101evn010", "simple-panel"; + power-supply = <&ldo4_ext>; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -112,6 +124,12 @@ &pinctrl_lcdif_hvsync>; lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &ldo4_ext { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 11966d12af76..f6e6b2cf780b 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -24,6 +24,18 @@ status = "okay"; }; + panel { + compatible = "auo,g101evn010", "simple-panel"; + power-supply = <&ldo4_ext>; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -112,6 +124,12 @@ &pinctrl_lcdif_hvsync>; lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &ldo4_ext { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 11966d12af76..f6e6b2cf780b 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -24,6 +24,18 @@ status = "okay"; }; + panel { + compatible = "auo,g101evn010", "simple-panel"; + power-supply = <&ldo4_ext>; + backlight = <&lcd_backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1 { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -112,6 +124,12 @@ &pinctrl_lcdif_hvsync>; lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &ldo4_ext { ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel 2018-10-25 15:09 ` Alex Gonzalez @ 2018-10-25 15:56 ` Fabio Estevam -1 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:56 UTC (permalink / raw) To: linux-arm-kernel On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > This change adds support for the AUO G101EVN010 lcdif panel for the > mxsfb DRM driver. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > index 11966d12af76..f6e6b2cf780b 100644 > --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > @@ -24,6 +24,18 @@ > status = "okay"; > }; > > + panel { > + compatible = "auo,g101evn010", "simple-panel"; The "simple-panel" string could be dropped. Reviewed-by: Fabio Estevam <festevam@gmail.com> > + power-supply = <&ldo4_ext>; > + backlight = <&lcd_backlight>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&display_out>; > + }; > + }; > + }; > + > reg_usb_otg1_vbus: regulator-usb-otg1 { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > @@ -112,6 +124,12 @@ > &pinctrl_lcdif_hvsync>; > lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ > status = "okay"; > + > + port { > + display_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > }; > > &ldo4_ext { > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel @ 2018-10-25 15:56 ` Fabio Estevam 0 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:56 UTC (permalink / raw) To: Gonzalez, Alex Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo, Mark Rutland, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Sascha Hauer, linux-kernel, Rob Herring, NXP Linux Team, Sascha Hauer, Fabio Estevam, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > This change adds support for the AUO G101EVN010 lcdif panel for the > mxsfb DRM driver. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> > --- > arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > index 11966d12af76..f6e6b2cf780b 100644 > --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts > @@ -24,6 +24,18 @@ > status = "okay"; > }; > > + panel { > + compatible = "auo,g101evn010", "simple-panel"; The "simple-panel" string could be dropped. Reviewed-by: Fabio Estevam <festevam@gmail.com> > + power-supply = <&ldo4_ext>; > + backlight = <&lcd_backlight>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&display_out>; > + }; > + }; > + }; > + > reg_usb_otg1_vbus: regulator-usb-otg1 { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > @@ -112,6 +124,12 @@ > &pinctrl_lcdif_hvsync>; > lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ > status = "okay"; > + > + port { > + display_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > }; > > &ldo4_ext { > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-25 15:09 ` Alex Gonzalez -1 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: linux-arm-kernel Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch screen by default on Digi International's AUO/Goodix LCD accessory kit used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7eca43ff69bb..d6e947307d67 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_EGALAX=y +CONFIG_TOUCHSCREEN_GOODIX=y CONFIG_TOUCHSCREEN_MAX11801=y CONFIG_TOUCHSCREEN_IMX6UL_TSC=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch screen by default on Digi International's AUO/Goodix LCD accessory kit used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7eca43ff69bb..d6e947307d67 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_EGALAX=y +CONFIG_TOUCHSCREEN_GOODIX=y CONFIG_TOUCHSCREEN_MAX11801=y CONFIG_TOUCHSCREEN_IMX6UL_TSC=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch screen by default on Digi International's AUO/Goodix LCD accessory kit used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 7eca43ff69bb..d6e947307d67 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_EGALAX=y +CONFIG_TOUCHSCREEN_GOODIX=y CONFIG_TOUCHSCREEN_MAX11801=y CONFIG_TOUCHSCREEN_IMX6UL_TSC=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-25 15:57 ` Fabio Estevam -1 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw) To: linux-arm-kernel On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch > screen by default on Digi International's AUO/Goodix LCD accessory kit used > with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX @ 2018-10-25 15:57 ` Fabio Estevam 0 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw) To: Gonzalez, Alex Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo, Rob Herring, Mark Rutland, Sascha Hauer, Sascha Hauer, Fabio Estevam, NXP Linux Team, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-kernel, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch > screen by default on Digi International's AUO/Goodix LCD accessory kit used > with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX @ 2018-10-25 15:57 ` Fabio Estevam 0 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw) To: Gonzalez, Alex Cc: Mark Rutland, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, David Airlie, linux-kernel, DRI mailing list, Rob Herring, Thierry Reding, NXP Linux Team, Sascha Hauer, Fabio Estevam, Shawn Guo, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch > screen by default on Digi International's AUO/Goodix LCD accessory kit used > with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-10-25 15:09 ` Alex Gonzalez -1 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: linux-arm-kernel The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index f6e6b2cf780b..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -117,6 +117,19 @@ }; }; +&i2c1 { + touchscreen at 14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -290,6 +303,12 @@ >; }; + pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index f6e6b2cf780b..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -117,6 +117,19 @@ }; }; +&i2c1 { + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -290,6 +303,12 @@ >; }; + pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller @ 2018-10-25 15:09 ` Alex Gonzalez 0 siblings, 0 replies; 38+ messages in thread From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw) To: thierry.reding, airlied, dri-devel, shawnguo Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> --- arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index f6e6b2cf780b..3749fdda3611 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -117,6 +117,19 @@ }; }; +&i2c1 { + touchscreen@14 { + compatible = "goodix,gt911"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_goodix_touch>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat0_17 @@ -290,6 +303,12 @@ >; }; + pinctrl_goodix_touch: goodixgrp{ + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020 + >; + }; + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 ^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller 2018-10-25 15:09 ` Alex Gonzalez @ 2018-10-25 15:57 ` Fabio Estevam -1 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw) To: linux-arm-kernel On Thu, Oct 25, 2018 at 12:10 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is > connected on the LVDS interface through an on-board LVDS transceiver. > > This change adds support for the touch interface. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller @ 2018-10-25 15:57 ` Fabio Estevam 0 siblings, 0 replies; 38+ messages in thread From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw) To: Gonzalez, Alex Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo, Rob Herring, Mark Rutland, Sascha Hauer, Sascha Hauer, Fabio Estevam, NXP Linux Team, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-kernel, moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE On Thu, Oct 25, 2018 at 12:10 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote: > > The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is > connected on the LVDS interface through an on-board LVDS transceiver. > > This change adds support for the touch interface. > > Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> ^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit 2018-10-25 15:09 ` Alex Gonzalez (?) @ 2018-11-04 8:54 ` Shawn Guo -1 siblings, 0 replies; 38+ messages in thread From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw) To: linux-arm-kernel On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: > Alex Gonzalez (4): > drm/panel: simple: Add AUO G101EVN010 panel support > ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel > ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX > ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller It looks good to me. Ping me when the patch #1 gets accepted and I will apply the test then. Shawn ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-11-04 8:54 ` Shawn Guo 0 siblings, 0 replies; 38+ messages in thread From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw) To: Alex Gonzalez Cc: thierry.reding, airlied, dri-devel, robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: > Alex Gonzalez (4): > drm/panel: simple: Add AUO G101EVN010 panel support > ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel > ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX > ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller It looks good to me. Ping me when the patch #1 gets accepted and I will apply the test then. Shawn ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-11-04 8:54 ` Shawn Guo 0 siblings, 0 replies; 38+ messages in thread From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw) To: Alex Gonzalez Cc: mark.rutland, devicetree, airlied, linux-kernel, dri-devel, robh+dt, thierry.reding, linux-imx, kernel, fabio.estevam, linux-arm-kernel On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: > Alex Gonzalez (4): > drm/panel: simple: Add AUO G101EVN010 panel support > ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel > ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX > ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller It looks good to me. Ping me when the patch #1 gets accepted and I will apply the test then. Shawn _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit 2018-11-04 8:54 ` Shawn Guo (?) @ 2018-12-04 16:52 ` Gonzalez, Alex -1 siblings, 0 replies; 38+ messages in thread From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw) To: Shawn Guo Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote: >On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: >> Alex Gonzalez (4): >> drm/panel: simple: Add AUO G101EVN010 panel support >> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel >> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX >> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller > >It looks good to me. Ping me when the patch #1 gets accepted and I >will apply the test then. > >Shawn Hi Shawn, Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it up for me) Alex _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-12-04 16:52 ` Gonzalez, Alex 0 siblings, 0 replies; 38+ messages in thread From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw) To: Shawn Guo Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote: >On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: >> Alex Gonzalez (4): >> drm/panel: simple: Add AUO G101EVN010 panel support >> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel >> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX >> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller > >It looks good to me. Ping me when the patch #1 gets accepted and I >will apply the test then. > >Shawn Hi Shawn, Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it up for me) Alex ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-12-04 16:52 ` Gonzalez, Alex 0 siblings, 0 replies; 38+ messages in thread From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw) To: Shawn Guo Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote: >On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: >> Alex Gonzalez (4): >> drm/panel: simple: Add AUO G101EVN010 panel support >> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel >> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX >> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller > >It looks good to me. Ping me when the patch #1 gets accepted and I >will apply the test then. > >Shawn Hi Shawn, Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it up for me) Alex _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit 2018-10-25 15:09 ` Alex Gonzalez @ 2018-12-05 0:40 ` Shawn Guo -1 siblings, 0 replies; 38+ messages in thread From: Shawn Guo @ 2018-12-05 0:40 UTC (permalink / raw) To: Alex Gonzalez Cc: mark.rutland, devicetree, airlied, s.hauer, linux-kernel, dri-devel, robh+dt, thierry.reding, linux-imx, kernel, fabio.estevam, linux-arm-kernel On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: > Alex Gonzalez (4): > drm/panel: simple: Add AUO G101EVN010 panel support > ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel > ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX > ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller Applied #2 ~ #4, thanks. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit @ 2018-12-05 0:40 ` Shawn Guo 0 siblings, 0 replies; 38+ messages in thread From: Shawn Guo @ 2018-12-05 0:40 UTC (permalink / raw) To: Alex Gonzalez Cc: thierry.reding, airlied, dri-devel, robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote: > Alex Gonzalez (4): > drm/panel: simple: Add AUO G101EVN010 panel support > ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel > ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX > ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller Applied #2 ~ #4, thanks. ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2023-05-14 15:32 ` Swapnil Raicha 0 siblings, 0 replies; 38+ messages in thread From: Swapnil Raicha @ 2023-05-14 15:32 UTC (permalink / raw) To: alex.gonzalez Cc: airlied, devicetree, dri-devel, fabio.estevam, kernel, linux-arm-kernel, linux-imx, linux-kernel, mark.rutland, robh+dt, s.hauer, shawnguo, thierry.reding Hi Alex, I am currently working on STM32MP1 based custom board and using the auo,g101evn010 panel. The panel comes up but the colours are not as expected. One observation is that when I pull down the notification bar on the Android Screen on the panel, due to the overlay of the notification, the colours in the background seems to be perfect then. Not getting where to look at for this issue. Seems to me an issue related to DRM. Can you please suggest a solution for the same. Waiting for a reply. Regards, Swapnil Raicha. ^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support @ 2023-05-14 15:32 ` Swapnil Raicha 0 siblings, 0 replies; 38+ messages in thread From: Swapnil Raicha @ 2023-05-14 15:32 UTC (permalink / raw) To: alex.gonzalez Cc: mark.rutland, devicetree, airlied, s.hauer, linux-kernel, dri-devel, robh+dt, thierry.reding, linux-imx, kernel, fabio.estevam, shawnguo, linux-arm-kernel Hi Alex, I am currently working on STM32MP1 based custom board and using the auo,g101evn010 panel. The panel comes up but the colours are not as expected. One observation is that when I pull down the notification bar on the Android Screen on the panel, due to the overlay of the notification, the colours in the background seems to be perfect then. Not getting where to look at for this issue. Seems to me an issue related to DRM. Can you please suggest a solution for the same. Waiting for a reply. Regards, Swapnil Raicha. ^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2023-05-15 7:18 UTC | newest] Thread overview: 38+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-10-25 15:09 [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-30 23:05 ` Rob Herring 2018-10-30 23:05 ` Rob Herring 2018-10-30 23:05 ` Rob Herring 2018-12-03 9:24 ` Gonzalez, Alex 2018-12-03 16:08 ` Thierry Reding 2018-12-03 16:08 ` Thierry Reding 2018-10-25 15:09 ` [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:56 ` Fabio Estevam 2018-10-25 15:56 ` Fabio Estevam 2018-10-25 15:09 ` [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:57 ` Fabio Estevam 2018-10-25 15:57 ` Fabio Estevam 2018-10-25 15:57 ` Fabio Estevam 2018-10-25 15:09 ` [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:09 ` Alex Gonzalez 2018-10-25 15:57 ` Fabio Estevam 2018-10-25 15:57 ` Fabio Estevam 2018-11-04 8:54 ` [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit Shawn Guo 2018-11-04 8:54 ` Shawn Guo 2018-11-04 8:54 ` Shawn Guo 2018-12-04 16:52 ` Gonzalez, Alex 2018-12-04 16:52 ` Gonzalez, Alex 2018-12-04 16:52 ` Gonzalez, Alex 2018-12-05 0:40 ` Shawn Guo 2018-12-05 0:40 ` Shawn Guo -- strict thread matches above, loose matches on Subject: below -- 2023-05-14 15:32 [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support Swapnil Raicha 2023-05-14 15:32 ` Swapnil Raicha
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.