From: Mesih Kilinc <mesihkilinc@gmail.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Icenowy Zheng <icenowy@aosc.io>, Rob Herring <robh+dt@kernel.org>,
Julian Calaby <julian.calaby@gmail.com>
Subject: Re: [PATCH v6 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC
Date: Mon, 3 Dec 2018 22:08:22 +0300 [thread overview]
Message-ID: <20181203190822.jt7sieazcapm722w@ThinkPad> (raw)
In-Reply-To: <20181203085531.exlmkfs6b4ejv5dr@flea>
On 18/12/03 09:55, Maxime Ripard wrote:
> On Sun, Dec 02, 2018 at 11:23:47PM +0300, Mesih Kilinc wrote:
> > diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > new file mode 100644
> > index 0000000..ea335a6
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > @@ -0,0 +1,541 @@
> > +/* SPDX-License-Identifier: GPL-2.0
>
> This isn't the proper SPDX format, and this is reported by
> checkpatch. I've fixed it while applying, but please make sure to run
> checkpatch.
Thanks Maxime, I will be more carefull next time. I actually saw that
warning, but I couldn't find what to do. I have looked to [1] and saw that
its spelled correctly. Now I think problem is, the licencse identifier
should be separate comment like:
// SPDX-...
Thanks!
Mesih
[1] =
https://spdx.org/sites/cpstandard/files/pages/files/using_spdx_license_list_short_identifiers.pdf
WARNING: multiple messages have this Message-ID (diff)
From: Mesih Kilinc <mesihkilinc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Daniel Lezcano
<daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Julian Calaby
<julian.calaby-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH v6 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC
Date: Mon, 3 Dec 2018 22:08:22 +0300 [thread overview]
Message-ID: <20181203190822.jt7sieazcapm722w@ThinkPad> (raw)
In-Reply-To: <20181203085531.exlmkfs6b4ejv5dr@flea>
On 18/12/03 09:55, Maxime Ripard wrote:
> On Sun, Dec 02, 2018 at 11:23:47PM +0300, Mesih Kilinc wrote:
> > diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > new file mode 100644
> > index 0000000..ea335a6
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > @@ -0,0 +1,541 @@
> > +/* SPDX-License-Identifier: GPL-2.0
>
> This isn't the proper SPDX format, and this is reported by
> checkpatch. I've fixed it while applying, but please make sure to run
> checkpatch.
Thanks Maxime, I will be more carefull next time. I actually saw that
warning, but I couldn't find what to do. I have looked to [1] and saw that
its spelled correctly. Now I think problem is, the licencse identifier
should be separate comment like:
// SPDX-...
Thanks!
Mesih
[1] =
https://spdx.org/sites/cpstandard/files/pages/files/using_spdx_license_list_short_identifiers.pdf
WARNING: multiple messages have this Message-ID (diff)
From: Mesih Kilinc <mesihkilinc@gmail.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
Julian Calaby <julian.calaby@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
linux-kernel@vger.kernel.org,
Russell King <linux@armlinux.org.uk>,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: Re: [PATCH v6 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC
Date: Mon, 3 Dec 2018 22:08:22 +0300 [thread overview]
Message-ID: <20181203190822.jt7sieazcapm722w@ThinkPad> (raw)
In-Reply-To: <20181203085531.exlmkfs6b4ejv5dr@flea>
On 18/12/03 09:55, Maxime Ripard wrote:
> On Sun, Dec 02, 2018 at 11:23:47PM +0300, Mesih Kilinc wrote:
> > diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > new file mode 100644
> > index 0000000..ea335a6
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c
> > @@ -0,0 +1,541 @@
> > +/* SPDX-License-Identifier: GPL-2.0
>
> This isn't the proper SPDX format, and this is reported by
> checkpatch. I've fixed it while applying, but please make sure to run
> checkpatch.
Thanks Maxime, I will be more carefull next time. I actually saw that
warning, but I couldn't find what to do. I have looked to [1] and saw that
its spelled correctly. Now I think problem is, the licencse identifier
should be separate comment like:
// SPDX-...
Thanks!
Mesih
[1] =
https://spdx.org/sites/cpstandard/files/pages/files/using_spdx_license_list_short_identifiers.pdf
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-03 19:08 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 20:23 [PATCH v6 00/17] initial support for "suniv" Allwinner new ARM9 SoC Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 01/17] ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 8:56 ` Maxime Ripard
2018-12-03 8:56 ` Maxime Ripard
2018-12-03 8:56 ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 02/17] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 8:57 ` Maxime Ripard
2018-12-03 8:57 ` Maxime Ripard
2018-12-03 8:57 ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 03/17] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 05/17] irqchip/sun4i: Add a struct to hold global variables Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 06/17] irqchip/sun4i: Move IC specific register offsets to struct Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 07/17] irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 08/17] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 09/17] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 10/17] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 11/17] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 12/17] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 13/17] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 8:55 ` Maxime Ripard
2018-12-03 8:55 ` Maxime Ripard
2018-12-03 8:55 ` Maxime Ripard
2018-12-03 19:08 ` Mesih Kilinc [this message]
2018-12-03 19:08 ` Mesih Kilinc
2018-12-03 19:08 ` Mesih Kilinc
2018-12-02 20:23 ` [PATCH v6 14/17] dt-bindings: sram: Add Allwinner suniv F1C100s Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 8:58 ` Maxime Ripard
2018-12-03 8:58 ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 15/17] dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 8:58 ` Maxime Ripard
2018-12-03 8:58 ` Maxime Ripard
2018-12-03 8:58 ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 16/17] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 9:01 ` Maxime Ripard
2018-12-03 9:01 ` Maxime Ripard
2018-12-03 9:01 ` Maxime Ripard
2018-12-02 20:23 ` [PATCH v6 17/17] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-02 20:23 ` Mesih Kilinc
2018-12-03 9:03 ` Maxime Ripard
2018-12-03 9:03 ` Maxime Ripard
2018-12-03 9:03 ` Maxime Ripard
2018-12-07 18:16 ` [PATCH v6 00/17] initial support for "suniv" Allwinner new ARM9 SoC Marc Zyngier
2018-12-07 18:16 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181203190822.jt7sieazcapm722w@ThinkPad \
--to=mesihkilinc@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=julian.calaby@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.