From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, Axel Haslam <axelhaslam@ti.com>,
Felipe Balbi <felipe.balbi@linux.intel.com>,
Illia Smyrnov <illia.smyrnov@ti.com>,
Marcel Partap <mpartap@gmx.net>,
Merlijn Wajer <merlijn@wizzup.org>,
Michael Scott <hashcode0f@gmail.com>, NeKit <nekit1000@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Sebastian Reichel <sre@kernel.org>
Subject: Re: [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration
Date: Mon, 3 Dec 2018 11:25:11 -0800 [thread overview]
Message-ID: <20181203192511.GC257010@dtor-ws> (raw)
In-Reply-To: <20181203012933.6647-1-tony@atomide.com>
On Sun, Dec 02, 2018 at 05:29:32PM -0800, Tony Lindgren wrote:
> I noticed that the Android v3.0.8 kernel on droid4 is using different
> keypad values from the mainline kernel and does not have issues with
> keys occasionally being stuck until pressed again. Turns out there was
> an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
> Correct debounce time", but it was never reposted to fix use macros
> for timing calculations.
>
> This updated version is using macros, and also fixes the use of the
> input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
> use the known good Android kernel values of 3 and 6 instead of 2 and 6
> in the earlier patch.
>
> Cc: Axel Haslam <axelhaslam@ti.com>
> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
> Cc: Illia Smyrnov <illia.smyrnov@ti.com>
> Cc: Marcel Partap <mpartap@gmx.net>
> Cc: Merlijn Wajer <merlijn@wizzup.org>
> Cc: Michael Scott <hashcode0f@gmail.com>
> Cc: NeKit <nekit1000@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Sebastian Reichel <sre@kernel.org>
> Reported-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
Applied, thank you.
> ---
> drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -60,8 +60,18 @@
>
> /* OMAP4 values */
> #define OMAP4_VAL_IRQDISABLE 0x0
> -#define OMAP4_VAL_DEBOUNCINGTIME 0x7
> -#define OMAP4_VAL_PVT 0x7
> +
> +/*
> + * Errata i689: If a key is released for a time shorter than debounce time,
> + * the keyboard will idle and never detect the key release. The workaround
> + * is to use at least a 12ms debounce time. See omap5432 TRM chapter
> + * "26.4.6.2 Keyboard Controller Timer" for more information.
> + */
> +#define OMAP4_KEYPAD_PTV_DIV_128 0x6
> +#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \
> + ((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
> +#define OMAP4_VAL_DEBOUNCINGTIME_16MS \
> + OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
>
> enum {
> KBD_REVISION_OMAP4 = 0,
> @@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
>
> kbd_writel(keypad_data, OMAP4_KBD_CTRL,
> OMAP4_DEF_CTRL_NOSOFTMODE |
> - (OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
> + (OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
> kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
> - OMAP4_VAL_DEBOUNCINGTIME);
> + OMAP4_VAL_DEBOUNCINGTIME_16MS);
> /* clear pending interrupts */
> kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
> --
> 2.19.2
--
Dmitry
next prev parent reply other threads:[~2018-12-03 19:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-03 1:29 [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Tony Lindgren
2018-12-03 1:29 ` [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states Tony Lindgren
2018-12-03 19:23 ` Dmitry Torokhov
2018-12-03 23:12 ` Tony Lindgren
2018-12-03 23:12 ` Tony Lindgren
2018-12-04 4:00 ` Dmitry Torokhov
2018-12-04 19:09 ` Tony Lindgren
2018-12-04 19:09 ` Tony Lindgren
2018-12-04 19:15 ` Dmitry Torokhov
2018-12-03 19:25 ` Dmitry Torokhov [this message]
2018-12-09 11:56 ` [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Pavel Machek
2018-12-10 14:32 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181203192511.GC257010@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=axelhaslam@ti.com \
--cc=felipe.balbi@linux.intel.com \
--cc=hashcode0f@gmail.com \
--cc=illia.smyrnov@ti.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=mpartap@gmx.net \
--cc=nekit1000@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.