All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, Axel Haslam <axelhaslam@ti.com>,
	Illia Smyrnov <illia.smyrnov@ti.com>,
	Marcel Partap <mpartap@gmx.net>,
	Merlijn Wajer <merlijn@wizzup.org>,
	Michael Scott <hashcode0f@gmail.com>, NeKit <nekit1000@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Sebastian Reichel <sre@kernel.org>
Subject: Re: [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
Date: Mon, 3 Dec 2018 20:00:01 -0800	[thread overview]
Message-ID: <20181204040001.GA239923@dtor-ws> (raw)
In-Reply-To: <20181203231251.GB39861@atomide.com>

Hi Tony,

On Mon, Dec 03, 2018 at 03:12:51PM -0800, Tony Lindgren wrote:
> 
> With PM enabled, I noticed that pressing a key on the droid4 keyboard will
> block deeper idle states for the SoC. Looks like we can fix this by
> managing the idle register to gether with the interrupt similar to what
> we already do for the GPIO controller.

Can you show me where exactly we are doing this? I can't seem to find
the matching code.

Thanks!

> 
> And there's no need to keep enabling and disabling interrupts and
> wake-up events for normal use if we use IRQF_ONESHOT as suggested by
> Dmitry Torokhov <dmitry.torokhov@gmail.com> so let's do that too.
> 
> Cc: Axel Haslam <axelhaslam@ti.com>
> Cc: Illia Smyrnov <illia.smyrnov@ti.com>
> Cc: Marcel Partap <mpartap@gmx.net>
> Cc: Merlijn Wajer <merlijn@wizzup.org>
> Cc: Michael Scott <hashcode0f@gmail.com>
> Cc: NeKit <nekit1000@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Sebastian Reichel <sre@kernel.org>
> Reported-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>  drivers/input/keyboard/omap4-keypad.c | 30 ++++++++++-----------------
>  1 file changed, 11 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -53,11 +53,12 @@
>  /* OMAP4 bit definitions */
>  #define OMAP4_DEF_IRQENABLE_EVENTEN	BIT(0)
>  #define OMAP4_DEF_IRQENABLE_LONGKEY	BIT(1)
> -#define OMAP4_DEF_WUP_EVENT_ENA		BIT(0)
> -#define OMAP4_DEF_WUP_LONG_KEY_ENA	BIT(1)
>  #define OMAP4_DEF_CTRL_NOSOFTMODE	BIT(1)
>  #define OMAP4_DEF_CTRL_PTV_SHIFT	2
>  
> +#define OMAP4_KBD_IRQ_MASK		(OMAP4_DEF_IRQENABLE_LONGKEY | \
> +					 OMAP4_DEF_IRQENABLE_EVENTEN)
> +
>  /* OMAP4 values */
>  #define OMAP4_VAL_IRQDISABLE		0x0
>  
> @@ -126,12 +127,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
>  {
>  	struct omap4_keypad *keypad_data = dev_id;
>  
> -	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
> -		/* Disable interrupts */
> -		kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> -				 OMAP4_VAL_IRQDISABLE);
> +	if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
>  		return IRQ_WAKE_THREAD;
> -	}
>  
>  	return IRQ_NONE;
>  }
> @@ -173,11 +170,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
>  	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>  			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>  
> -	/* enable interrupts */
> -	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> -		OMAP4_DEF_IRQENABLE_EVENTEN |
> -				OMAP4_DEF_IRQENABLE_LONGKEY);
> -
>  	return IRQ_HANDLED;
>  }
>  
> @@ -197,11 +189,10 @@ static int omap4_keypad_open(struct input_dev *input)
>  	/* clear pending interrupts */
>  	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>  			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
> -	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> -			OMAP4_DEF_IRQENABLE_EVENTEN |
> -				OMAP4_DEF_IRQENABLE_LONGKEY);
> -	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> -			OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
> +
> +	/* enable interrupts and wake-up events */
> +	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, OMAP4_KBD_IRQ_MASK);
> +	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, OMAP4_KBD_IRQ_MASK);
>  
>  	enable_irq(keypad_data->irq);
>  
> @@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
>  
>  	disable_irq(keypad_data->irq);
>  
> -	/* Disable interrupts */
> +	/* Disable interrupts and wake-up events */
>  	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>  			 OMAP4_VAL_IRQDISABLE);
> +	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
>  
>  	/* clear pending interrupts */
>  	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> @@ -365,7 +357,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
>  	}
>  
>  	error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
> -				     omap4_keypad_irq_thread_fn, 0,
> +				     omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
>  				     "omap4-keypad", keypad_data);
>  	if (error) {
>  		dev_err(&pdev->dev, "failed to register interrupt\n");
> -- 
> 2.19.2

-- 
Dmitry

  reply	other threads:[~2018-12-04  4:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-03  1:29 [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Tony Lindgren
2018-12-03  1:29 ` [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states Tony Lindgren
2018-12-03 19:23   ` Dmitry Torokhov
2018-12-03 23:12     ` Tony Lindgren
2018-12-03 23:12       ` Tony Lindgren
2018-12-04  4:00       ` Dmitry Torokhov [this message]
2018-12-04 19:09         ` Tony Lindgren
2018-12-04 19:09           ` Tony Lindgren
2018-12-04 19:15           ` Dmitry Torokhov
2018-12-03 19:25 ` [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Dmitry Torokhov
2018-12-09 11:56 ` Pavel Machek
2018-12-10 14:32   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181204040001.GA239923@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=axelhaslam@ti.com \
    --cc=hashcode0f@gmail.com \
    --cc=illia.smyrnov@ti.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=merlijn@wizzup.org \
    --cc=mpartap@gmx.net \
    --cc=nekit1000@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.