All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: freedreno@lists.freedesktop.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	festevam@gmail.com, Sascha Hauer <s.hauer@pengutronix.de>,
	open list <linux-kernel@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Chris.Healy@zii.aero,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	NXP Linux Team <linux-imx@nxp.com>
Subject: [PATCH v4 4/5] ARM: dts: imx5: add gpu nodes
Date: Tue,  4 Dec 2018 10:17:00 -0500	[thread overview]
Message-ID: <20181204151702.8514-4-jonathan@marek.ca> (raw)
In-Reply-To: <20181204151702.8514-1-jonathan@marek.ca>

This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now
supported by the freedreno driver.

The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm
driver to identify the smaller 128KiB GMEM size.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
v4:
 added commit message
 moved to follow address order
 removed frequencies, they are not needed as clocks have fixed rate

 arch/arm/boot/dts/imx51.dtsi | 10 ++++++++++
 arch/arm/boot/dts/imx53.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 67d462715..14dcc5a41 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -123,6 +123,16 @@
 			reg = <0x1ffe0000 0x20000>;
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		ipu: ipu@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 207eb557c..d7d5fe4c7 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -209,6 +209,16 @@
 			};
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		aips@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Marek <jonathan-eSc4qw6YbEQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Chris.Healy-c8ZVq/bFV1I@public.gmane.org,
	Pengutronix Kernel Team
	<kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
	Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	NXP Linux Team <linux-imx-3arQi8VN3Tc@public.gmane.org>
Subject: [PATCH v4 4/5] ARM: dts: imx5: add gpu nodes
Date: Tue,  4 Dec 2018 10:17:00 -0500	[thread overview]
Message-ID: <20181204151702.8514-4-jonathan@marek.ca> (raw)
In-Reply-To: <20181204151702.8514-1-jonathan-eSc4qw6YbEQ@public.gmane.org>

This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now
supported by the freedreno driver.

The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm
driver to identify the smaller 128KiB GMEM size.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
v4:
 added commit message
 moved to follow address order
 removed frequencies, they are not needed as clocks have fixed rate

 arch/arm/boot/dts/imx51.dtsi | 10 ++++++++++
 arch/arm/boot/dts/imx53.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 67d462715..14dcc5a41 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -123,6 +123,16 @@
 			reg = <0x1ffe0000 0x20000>;
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		ipu: ipu@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 207eb557c..d7d5fe4c7 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -209,6 +209,16 @@
 			};
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		aips@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.17.1

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Marek <jonathan@marek.ca>
To: freedreno@lists.freedesktop.org
Cc: Chris.Healy@zii.aero, festevam@gmail.com,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v4 4/5] ARM: dts: imx5: add gpu nodes
Date: Tue,  4 Dec 2018 10:17:00 -0500	[thread overview]
Message-ID: <20181204151702.8514-4-jonathan@marek.ca> (raw)
In-Reply-To: <20181204151702.8514-1-jonathan@marek.ca>

This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now
supported by the freedreno driver.

The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm
driver to identify the smaller 128KiB GMEM size.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
v4:
 added commit message
 moved to follow address order
 removed frequencies, they are not needed as clocks have fixed rate

 arch/arm/boot/dts/imx51.dtsi | 10 ++++++++++
 arch/arm/boot/dts/imx53.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 67d462715..14dcc5a41 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -123,6 +123,16 @@
 			reg = <0x1ffe0000 0x20000>;
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		ipu: ipu@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 207eb557c..d7d5fe4c7 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -209,6 +209,16 @@
 			};
 		};
 
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
 		aips@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
-- 
2.17.1


  parent reply	other threads:[~2018-12-04 15:20 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-04 15:16 [PATCH v4 1/5] drm/msm/mdp4: add lcdc-align-lsb flag to control lane alignment Jonathan Marek
2018-12-04 15:16 ` Jonathan Marek
     [not found] ` <20181204151702.8514-1-jonathan-eSc4qw6YbEQ@public.gmane.org>
2018-12-04 15:16   ` [PATCH v4 2/5] drm/msm: add headless gpu device for imx5 Jonathan Marek
2018-12-04 15:16     ` Jonathan Marek
2018-12-04 15:17   ` [PATCH v4 5/5] dt-bindings: display: msm/gpu: document amd, imageon compatible Jonathan Marek
2018-12-04 15:17     ` [PATCH v4 5/5] dt-bindings: display: msm/gpu: document amd,imageon compatible Jonathan Marek
2018-12-07 23:18     ` Rob Herring
2018-12-07 23:18       ` Rob Herring
2018-12-07 23:18   ` [PATCH v4 1/5] drm/msm/mdp4: add lcdc-align-lsb flag to control lane alignment Rob Herring
2018-12-07 23:18     ` Rob Herring
2018-12-04 15:16 ` [PATCH v4 3/5] drm/msm: implement a2xx mmu Jonathan Marek
2018-12-04 15:16   ` Jonathan Marek
2018-12-04 15:17 ` Jonathan Marek [this message]
2018-12-04 15:17   ` [PATCH v4 4/5] ARM: dts: imx5: add gpu nodes Jonathan Marek
2018-12-04 15:17   ` Jonathan Marek
2018-12-07 23:25   ` Fabio Estevam
2018-12-07 23:25     ` Fabio Estevam
2018-12-07 23:25     ` Fabio Estevam
2018-12-08  3:24   ` Shawn Guo
2018-12-08  3:24     ` Shawn Guo
2018-12-08  3:24     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181204151702.8514-4-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=Chris.Healy@zii.aero \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=festevam@gmail.com \
    --cc=freedreno@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.