* [PATCH] ARM: omap2plus_defconfig: add networking over USB device
@ 2018-12-04 20:59 ` Michael Opdenacker
0 siblings, 0 replies; 4+ messages in thread
From: Michael Opdenacker @ 2018-12-04 20:59 UTC (permalink / raw)
To: tony; +Cc: linux, linux-omap, linux-arm-kernel, linux-kernel,
Michael Opdenacker
This adds support for networking over USB device,
which allows boards such as the BeagleBoneBlack Wireless and
Pocket Beagle to boot on an NFS root filesystem. Such boards
have no Ethernet port.
This is for consistency with CONFIG_ROOT_NFS=y
which makes no sense if there is no networking.
Tested on BeagleBoneBlack Wireless and BeagleBoneBlack
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
arch/arm/configs/omap2plus_defconfig | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 6491419b1dad..7e8a8ed028fd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -403,11 +403,11 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_TUSB6010=y
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_TUSB_OMAP_DMA=y
@@ -418,10 +418,10 @@ CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_TEST=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_AM335X_PHY_USB=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_AM335X_PHY_USB=y
CONFIG_TWL6030_USB=m
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
@@ -442,6 +442,7 @@ CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_ETH=y
CONFIG_USB_ZERO=m
CONFIG_USB_G_NOKIA=m
CONFIG_MMC=y
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ARM: omap2plus_defconfig: add networking over USB device
@ 2018-12-04 20:59 ` Michael Opdenacker
0 siblings, 0 replies; 4+ messages in thread
From: Michael Opdenacker @ 2018-12-04 20:59 UTC (permalink / raw)
To: tony; +Cc: Michael Opdenacker, linux-omap, linux, linux-arm-kernel,
linux-kernel
This adds support for networking over USB device,
which allows boards such as the BeagleBoneBlack Wireless and
Pocket Beagle to boot on an NFS root filesystem. Such boards
have no Ethernet port.
This is for consistency with CONFIG_ROOT_NFS=y
which makes no sense if there is no networking.
Tested on BeagleBoneBlack Wireless and BeagleBoneBlack
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
arch/arm/configs/omap2plus_defconfig | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 6491419b1dad..7e8a8ed028fd 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -403,11 +403,11 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_TUSB6010=y
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_TUSB_OMAP_DMA=y
@@ -418,10 +418,10 @@ CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_TEST=m
-CONFIG_NOP_USB_XCEIV=m
-CONFIG_AM335X_PHY_USB=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_AM335X_PHY_USB=y
CONFIG_TWL6030_USB=m
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
@@ -442,6 +442,7 @@ CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_ETH=y
CONFIG_USB_ZERO=m
CONFIG_USB_G_NOKIA=m
CONFIG_MMC=y
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: omap2plus_defconfig: add networking over USB device
2018-12-04 20:59 ` Michael Opdenacker
@ 2018-12-04 21:52 ` Tony Lindgren
-1 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2018-12-04 21:52 UTC (permalink / raw)
To: Michael Opdenacker; +Cc: linux, linux-omap, linux-arm-kernel, linux-kernel
Hi,
* Michael Opdenacker <michael.opdenacker@bootlin.com> [181204 12:59]:
> This adds support for networking over USB device,
> which allows boards such as the BeagleBoneBlack Wireless and
> Pocket Beagle to boot on an NFS root filesystem. Such boards
> have no Ethernet port.
>
> This is for consistency with CONFIG_ROOT_NFS=y
> which makes no sense if there is no networking.
Hmm well this has few issues though:
1. We've had USB as loadable modules for years now to
cut down on bloat and try to make things more
distro friendly
2. MUSB has never worked well with PM and enabling
it almost certainly would break PM for multiple
devices
3. The USB gadget configuration should be done using
configfs as it's device and policy specific and
Ethernet gadget may not be even desirable
So I suggest just doing what distros do and use a proper
initramfs :)
BTW what works quite nicely for devices with Ethernet
controller is to have u-boot load dtb, kernel and
modules.tar.gz over Ethernet and write it to mmc. That
way the loaded kernel and modules are available on
boot as long as some init script untars modules.tar.gz
first thing when init starts.
Regards,
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: omap2plus_defconfig: add networking over USB device
@ 2018-12-04 21:52 ` Tony Lindgren
0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2018-12-04 21:52 UTC (permalink / raw)
To: Michael Opdenacker; +Cc: linux-omap, linux, linux-arm-kernel, linux-kernel
Hi,
* Michael Opdenacker <michael.opdenacker@bootlin.com> [181204 12:59]:
> This adds support for networking over USB device,
> which allows boards such as the BeagleBoneBlack Wireless and
> Pocket Beagle to boot on an NFS root filesystem. Such boards
> have no Ethernet port.
>
> This is for consistency with CONFIG_ROOT_NFS=y
> which makes no sense if there is no networking.
Hmm well this has few issues though:
1. We've had USB as loadable modules for years now to
cut down on bloat and try to make things more
distro friendly
2. MUSB has never worked well with PM and enabling
it almost certainly would break PM for multiple
devices
3. The USB gadget configuration should be done using
configfs as it's device and policy specific and
Ethernet gadget may not be even desirable
So I suggest just doing what distros do and use a proper
initramfs :)
BTW what works quite nicely for devices with Ethernet
controller is to have u-boot load dtb, kernel and
modules.tar.gz over Ethernet and write it to mmc. That
way the loaded kernel and modules are available on
boot as long as some init script untars modules.tar.gz
first thing when init starts.
Regards,
Tony
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-12-04 21:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-12-04 20:59 [PATCH] ARM: omap2plus_defconfig: add networking over USB device Michael Opdenacker
2018-12-04 20:59 ` Michael Opdenacker
2018-12-04 21:52 ` Tony Lindgren
2018-12-04 21:52 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.