[virtio-dev] Re: [PATCH v3] packed-ring: fix example code

[Tiwei Bie <tiwei.bie@intel.com>]

On Wed, Dec 05, 2018 at 03:04:08PM +0100, Cornelia Huck wrote:
> On Wed,  5 Dec 2018 10:16:51 +0800
> Tiwei Bie <tiwei.bie@intel.com> wrote:
> 
> > Driver can't just check whether USED bit equals to the used
> > wrap counter when checking whether a descriptor is a used
> > descriptor, because driver also needs to check whether the
> > descriptor has been made available. Below is an example:
> > 
> > Assuming ring size is 4, ring's initial state will be:
> > 
> > +----+----+----+----+
> > | 00 | 00 | 00 | 00 |
> > +----+----+----+----+
> > 
> > 00 means AVAIL=0 USED=0, 01 means AVAIL=0 USED=1
> > 10 means AVAIL=1 USED=0, 11 means AVAIL=1 USED=1
> > 
> > After driver made two descriptor chains available and each
> > chain consists of two descriptors, the ring could be:
> > 
> > +----+-----------+----+-----------+
> > | 10 | 10 (id=0) | 10 | 10 (id=1) |
> > +----+-----------+----+-----------+
> > 
> > After device processed all the available descriptors and made
> > them used (e.g. in order), the ring could be:
> > 
> > +-----------+----+-----------+----+
> > | 11 (id=0) | 10 | 11 (id=1) | 10 |
> > +-----------+----+-----------+----+
> > 
> > After driver processed all the used descriptors and made
> > one descriptor (not chained, just one descriptor) available,
> > the ring could be:
> > 
> > +-----------+----+----+----+
> > | 01 (id=0) | 10 | 11 | 10 |
> > +-----------+----+----+----+
> > 
> > After device made that descriptor used, the ring will be:
> > 
> > +-----------+----+----+----+
> > | 00 (id=0) | 10 | 11 | 10 |
> > +-----------+----+----+----+
> > 
> > If driver just checks whether USED bit equals to the used
> > wrap counter when checking whether a descriptor is a used
> > descriptor, after processing the first descriptor (whose
> > AVAIL and USED bits are both 0), and advancing vq->next_used
> > pointer, it will then also treat the next descriptor, i.e.
> > the second descriptor (whose AVAIL and USED bits are 1 and
> > 0 respectively) as a used descriptor which is wrong.
> > 
> > Fixes: https://github.com/oasis-tcs/virtio-spec/issues/29
> > Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> > ---
> > v2:
> > - Add "Fixes" tag;
> > - Refine commit log;
> > 
> > v3:
> > - Compare with vq->used_wrap_count (MST);
> > - Add comments (MST);
> > - Refine commit log;
> > 
> >  packed-ring.tex | 19 ++++++++++++++++---
> >  1 file changed, 16 insertions(+), 3 deletions(-)
> > 
> > diff --git a/packed-ring.tex b/packed-ring.tex
> > index f24f49b..c8cd83b 100644
> > --- a/packed-ring.tex
> > +++ b/packed-ring.tex
> > @@ -687,16 +687,29 @@ vq->driver_event.flags = RING_EVENT_FLAGS_DISABLE;
> >  for (;;) {
> >          struct pvirtq_desc *d = vq->desc[vq->next_used];
> >  
> > +        /*
> > +         * Check that
> > +         * 1. Descriptor has been made available.
> > +         *    Note: there are many other ways to check this, e.g.
> > +         *    track the number of outstanding available descriptors or buffers
> > +         *    and check that it's not 0.
> > +         * 2. Descriptor has been used by device.
> 
> s/device/the device/
> 
> > +         */
> >          flags = d->flags;
> > +        bool avail = flags & VIRTQ_DESC_F_AVAIL;
> >          bool used = flags & VIRTQ_DESC_F_USED;
> > -
> > -        if (used != vq->used_wrap_count) {
> > +        if (avail != vq->used_wrap_count || used != vq->used_wrap_count) {
> >                  vq->driver_event.flags = RING_EVENT_FLAGS_ENABLE;
> >                  memory_barrier();
> >  
> > +                /*
> > +                 * Re-test in case another thread submitted more descriptors
> > +                 * and/or device used more descriptors before driver enabled events.
> 
> s/device/the device/
> s/driver/the driver/
> 
> (Also in the patch description.)

Got it. Will fix them in the next version. Thanks!

> 
> > +                 */
> >                  flags = d->flags;
> > +                bool avail = flags & VIRTQ_DESC_F_AVAIL;
> >                  bool used = flags & VIRTQ_DESC_F_USED;
> > -                if (used != vq->used_wrap_count) {
> > +                if (avail != vq->used_wrap_count || used != vq->used_wrap_count) {
> >                          break;
> >                  }
> >  
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org