All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Peter Ujfalusi" <peter.ujfalusi@ti.com>,
	devicetree@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: Cosmetic fix for omap5 USB node names
Date: Wed, 12 Dec 2018 18:18:01 -0800	[thread overview]
Message-ID: <20181213021801.49938-2-tony@atomide.com> (raw)
In-Reply-To: <20181213021801.49938-1-tony@atomide.com>

These should be now using offset from the module base and not the
full physical address.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-l4.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -195,7 +195,7 @@
 				#size-cells = <1>;
 				utmi-mode = <2>;
 				ranges = <0 0 0x20000>;
-				dwc3: dwc3@4a030000 {
+				dwc3: dwc3@10000 {
 					compatible = "snps,dwc3";
 					reg = <0x10000 0x10000>;
 					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
@@ -332,14 +332,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@4a064800 {
+				usbhsohci: ohci@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@4a064c00 {
+				usbhsehci: ehci@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.19.2

WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Peter Ujfalusi" <peter.ujfalusi@ti.com>,
	devicetree@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: Cosmetic fix for omap5 USB node names
Date: Wed, 12 Dec 2018 18:18:01 -0800	[thread overview]
Message-ID: <20181213021801.49938-2-tony@atomide.com> (raw)
In-Reply-To: <20181213021801.49938-1-tony@atomide.com>

These should be now using offset from the module base and not the
full physical address.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap5-l4.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -195,7 +195,7 @@
 				#size-cells = <1>;
 				utmi-mode = <2>;
 				ranges = <0 0 0x20000>;
-				dwc3: dwc3@4a030000 {
+				dwc3: dwc3@10000 {
 					compatible = "snps,dwc3";
 					reg = <0x10000 0x10000>;
 					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
@@ -332,14 +332,14 @@
 					      "refclk_60m_ext_p1",
 					      "refclk_60m_ext_p2";
 
-				usbhsohci: ohci@4a064800 {
+				usbhsohci: ohci@800 {
 					compatible = "ti,ohci-omap3";
 					reg = <0x800 0x400>;
 					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 					remote-wakeup-connected;
 				};
 
-				usbhsehci: ehci@4a064c00 {
+				usbhsehci: ehci@c00 {
 					compatible = "ti,ehci-omap";
 					reg = <0xc00 0x400>;
 					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.19.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2018-12-13  2:18 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13  2:18 [PATCH 1/2] ARM: dts: Fix wrong address for omap5 sata phy Tony Lindgren
2018-12-13  2:18 ` Tony Lindgren
2018-12-13  2:18 ` Tony Lindgren [this message]
2018-12-13  2:18   ` [PATCH 2/2] ARM: dts: Cosmetic fix for omap5 USB node names Tony Lindgren
2018-12-13 17:08 ` [PATCH 1/2] ARM: dts: Fix wrong address for omap5 sata phy Tony Lindgren
2018-12-13 17:08   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181213021801.49938-2-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.