[PATCH AUTOSEL 4.4 01/23] mac80211_hwsim: fix module init error paths for netlink

[PATCH AUTOSEL 4.4 01/23] mac80211_hwsim: fix module init error paths for netlink

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 05cc09de4c017663a217630682041066f2f9a5cd ]

There is no unregister netlink notifier and family on error paths
in init_mac80211_hwsim(). Also there is an error path where
hwsim_class is not destroyed.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 62759361eb49 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mac80211_hwsim.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 05413176a5d6..aad5228e3ade 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3195,16 +3195,16 @@ static int __init init_mac80211_hwsim(void)
 	if (err)
 		return err;
 
+	err = hwsim_init_netlink();
+	if (err)
+		goto out_unregister_driver;
+
 	hwsim_class = class_create(THIS_MODULE, "mac80211_hwsim");
 	if (IS_ERR(hwsim_class)) {
 		err = PTR_ERR(hwsim_class);
-		goto out_unregister_driver;
+		goto out_exit_netlink;
 	}
 
-	err = hwsim_init_netlink();
-	if (err < 0)
-		goto out_unregister_driver;
-
 	for (i = 0; i < radios; i++) {
 		struct hwsim_new_radio_params param = { 0 };
 
@@ -3310,6 +3310,8 @@ static int __init init_mac80211_hwsim(void)
 	free_netdev(hwsim_mon);
 out_free_radios:
 	mac80211_hwsim_free();
+out_exit_netlink:
+	hwsim_exit_netlink();
 out_unregister_driver:
 	platform_driver_unregister(&mac80211_hwsim_driver);
 	return err;
-- 
2.19.1

[PATCH AUTOSEL 4.4 02/23] scsi: libiscsi: Fix NULL pointer dereference in iscsi_eh_session_reset

[Sasha Levin]

From: Fred Herard <fred.herard@oracle.com>

[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]

This commit addresses NULL pointer dereference in iscsi_eh_session_reset.
Reference should not be made to session->leadconn when session->state is
set to ISCSI_STATE_TERMINATE.

Signed-off-by: Fred Herard <fred.herard@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index a74f8fbefd33..009a2ef829d6 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2416,8 +2416,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc)
 failed:
 		ISCSI_DBG_EH(session,
 			     "failing session reset: Could not log back into "
-			     "%s, %s [age %d]\n", session->targetname,
-			     conn->persistent_address, session->age);
+			     "%s [age %d]\n", session->targetname,
+			     session->age);
 		spin_unlock_bh(&session->frwd_lock);
 		mutex_unlock(&session->eh_mutex);
 		return FAILED;
-- 
2.19.1

[PATCH AUTOSEL 4.4 03/23] scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload

[Sasha Levin]

From: Cathy Avery <cavery@redhat.com>

[ Upstream commit 02f425f811cefcc4d325d7a72272651e622dc97e ]

Currently pvscsi_remove calls free_irq more than once as
pvscsi_release_resources and __pvscsi_shutdown both call
pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ'
warning and stack trace. To solve the problem pvscsi_shutdown_intr has been
moved out of pvscsi_release_resources.

Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/vmw_pvscsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 0de2f9069e23..23081ed8f1e3 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1199,8 +1199,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
 
 static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
 {
-	pvscsi_shutdown_intr(adapter);
-
 	if (adapter->workqueue)
 		destroy_workqueue(adapter->workqueue);
 
@@ -1529,6 +1527,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 out_reset_adapter:
 	ll_adapter_reset(adapter);
 out_release_resources:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	scsi_host_put(host);
 out_disable_device:
@@ -1537,6 +1536,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 
 out_release_resources_and_disable:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	goto out_disable_device;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.4 04/23] x86/earlyprintk/efi: Fix infinite loop on some screen widths

[Sasha Levin]

From: YiFei Zhu <zhuyifei1999@gmail.com>

[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]

An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.

This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.

Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c
index 524142117296..82324fc25d5e 100644
--- a/arch/x86/platform/efi/early_printk.c
+++ b/arch/x86/platform/efi/early_printk.c
@@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			num--;
 		}
 
-		if (efi_x >= si->lfb_width) {
+		if (efi_x + font->width > si->lfb_width) {
 			efi_x = 0;
 			efi_y += font->height;
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.4 04/23] x86/earlyprintk/efi: Fix infinite loop on some screen widths

[Sasha Levin]

From: YiFei Zhu <zhuyifei1999@gmail.com>

[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]

An affected screen resolution is 1366 x 768, which width is not
divisible by 8, the default font width. On such screens, when longer
lines are earlyprintk'ed, overflow-to-next-line can never trigger,
due to the left-most x-coordinate of the next character always less
than the screen width. Earlyprintk will infinite loop in trying to
print the rest of the string but unable to, due to the line being
full.

This patch makes the trigger consider the right-most x-coordinate,
instead of left-most, as the value to compare against the screen
width threshold.

Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c
index 524142117296..82324fc25d5e 100644
--- a/arch/x86/platform/efi/early_printk.c
+++ b/arch/x86/platform/efi/early_printk.c
@@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			num--;
 		}
 
-		if (efi_x >= si->lfb_width) {
+		if (efi_x + font->width > si->lfb_width) {
 			efi_x = 0;
 			efi_y += font->height;
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.4 05/23] drm/msm: Grab a vblank reference when waiting for commit_done

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 3b712e43e3876b42b38321ecf790a1f5fe59c834 ]

Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_atomic.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
index 7eb253bc24df..221eaea651d4 100644
--- a/drivers/gpu/drm/msm/msm_atomic.c
+++ b/drivers/gpu/drm/msm/msm_atomic.c
@@ -107,7 +107,12 @@ static void msm_atomic_wait_for_commit_done(struct drm_device *dev,
 		if (old_state->legacy_cursor_update)
 			continue;
 
+		if (drm_crtc_vblank_get(crtc))
+			continue;
+
 		kms->funcs->wait_for_crtc_commit_done(kms, crtc);
+
+		drm_crtc_vblank_put(crtc);
 	}
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.4 06/23] ARC: io.h: Implement reads{x}()/writes{x}()

[Sasha Levin]

From: Jose Abreu <joabreu@synopsys.com>

[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]

Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.

Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.

[1] Documentation/unaligned-memory-access.txt

Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Joao Pinto <jpinto at synopsys.com>
Cc: David Laight <David.Laight at ACULAB.COM>
Tested-by: Vitor Soares <soares at synopsys.com>
Signed-off-by: Jose Abreu <joabreu at synopsys.com>
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arc/include/asm/io.h | 72 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index cb69299a492e..f120d823e8c2 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -85,6 +86,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -117,6 +154,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -132,10 +198,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves
-- 
2.19.1

[PATCH AUTOSEL 4.4 06/23] ARC: io.h: Implement reads{x}()/writes{x}()

[Sasha Levin]

From: Jose Abreu <joabreu@synopsys.com>

[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]

Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.

Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.

[1] Documentation/unaligned-memory-access.txt

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Tested-by: Vitor Soares <soares@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/include/asm/io.h | 72 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index cb69299a492e..f120d823e8c2 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -85,6 +86,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }
 
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@@ -117,6 +154,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -132,10 +198,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
 
 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
 
 /*
  * Relaxed API for drivers which can handle barrier ordering themselves
-- 
2.19.1

[PATCH AUTOSEL 4.4 07/23] bonding: fix 802.3ad state sent to partner when unbinding slave

[Sasha Levin]

From: Toni Peltonen <peltzi@peltzi.fi>

[ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ]

Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.

I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).

Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.

Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_3ad.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 940e2ebbdea8..399c627b15cc 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2011,6 +2011,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
 		   aggregator->aggregator_identifier);
 
 	/* Tell the partner that this port is not suitable for aggregation */
+	port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
+	port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
+	port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
 	port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
 	__update_lacpdu_from_port(port);
 	ad_lacpdu_send(port);
-- 
2.19.1

[PATCH AUTOSEL 4.4 08/23] SUNRPC: Fix leak of krb5p encode pages

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 8dae5398ab1ac107b1517e8195ed043d5f422bd0 ]

call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/auth_gss.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 1f0687d8e3d7..62fca77bf3c7 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1722,6 +1722,7 @@ priv_release_snd_buf(struct rpc_rqst *rqstp)
 	for (i=0; i < rqstp->rq_enc_pages_num; i++)
 		__free_page(rqstp->rq_enc_pages[i]);
 	kfree(rqstp->rq_enc_pages);
+	rqstp->rq_release_snd_buf = NULL;
 }
 
 static int
@@ -1730,6 +1731,9 @@ alloc_enc_pages(struct rpc_rqst *rqstp)
 	struct xdr_buf *snd_buf = &rqstp->rq_snd_buf;
 	int first, last, i;
 
+	if (rqstp->rq_release_snd_buf)
+		rqstp->rq_release_snd_buf(rqstp);
+
 	if (snd_buf->page_len == 0) {
 		rqstp->rq_enc_pages_num = 0;
 		return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.4 09/23] SUNRPC: Fix a potential race in xprt_connect()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]

If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.

Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprt.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 2e98f4a243e5..112c191b8336 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -758,8 +758,15 @@ void xprt_connect(struct rpc_task *task)
 			return;
 		if (xprt_test_and_set_connecting(xprt))
 			return;
-		xprt->stat.connect_start = jiffies;
-		xprt->ops->connect(xprt, task);
+		/* Race breaker */
+		if (!xprt_connected(xprt)) {
+			xprt->stat.connect_start = jiffies;
+			xprt->ops->connect(xprt, task);
+		} else {
+			xprt_clear_connecting(xprt);
+			task->tk_status = 0;
+			rpc_wake_up_queued_task(&xprt->pending, task);
+		}
 	}
 	xprt_release_write(xprt, task);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.4 10/23] sbus: char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/display7seg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 33fbe8249fd5..044cffbc45e8 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -221,6 +221,7 @@ static int d7s_probe(struct platform_device *op)
 	dev_set_drvdata(&op->dev, p);
 	d7s_device = p;
 	err = 0;
+	of_node_put(opts);
 
 out:
 	return err;
-- 
2.19.1

[PATCH AUTOSEL 4.4 10/23] sbus: char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 87d81a23e24f24ebe014891e8bdf3ff8785031e8 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/display7seg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 33fbe8249fd5..044cffbc45e8 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -221,6 +221,7 @@ static int d7s_probe(struct platform_device *op)
 	dev_set_drvdata(&op->dev, p);
 	d7s_device = p;
 	err = 0;
+	of_node_put(opts);
 
 out:
 	return err;
-- 
2.19.1

[PATCH AUTOSEL 4.4 11/23] drivers/sbus/char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/envctrl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 5609b602c54d..baa9b322520b 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp,
 			for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
 				pchild->mon_type[len] = ENVCTRL_NOMON;
 			}
+			of_node_put(root_node);
 			return;
 		}
+		of_node_put(root_node);
 	}
 
 	/* Get the monitor channels. */
-- 
2.19.1

[PATCH AUTOSEL 4.4 11/23] drivers/sbus/char: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sbus/char/envctrl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 5609b602c54d..baa9b322520b 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp,
 			for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
 				pchild->mon_type[len] = ENVCTRL_NOMON;
 			}
+			of_node_put(root_node);
 			return;
 		}
+		of_node_put(root_node);
 	}
 
 	/* Get the monitor channels. */
-- 
2.19.1

[PATCH AUTOSEL 4.4 12/23] drivers/tty: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/suncore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 127472bd6a7c..209f314745ab 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -111,6 +111,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;
-- 
2.19.1

[PATCH AUTOSEL 4.4 12/23] drivers/tty: add missing of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit dac097c4546e4c5b16dd303a1e97c1d319c8ab3e ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place is not doing this, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/suncore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 127472bd6a7c..209f314745ab 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -111,6 +111,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;
-- 
2.19.1

[PATCH AUTOSEL 4.4 13/23] ide: pmac: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/pmac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 96a345248224..0add5bb3cee8 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	struct device_node *root = of_find_node_by_path("/");
 	const char *model = of_get_property(root, "model", NULL);
 
+	of_node_put(root);
 	/* Get cable type from device-tree. */
 	if (cable && !strncmp(cable, "80-", 3)) {
 		/* Some drives fail to detect 80c cable in PowerBook */
-- 
2.19.1

[PATCH AUTOSEL 4.4 13/23] ide: pmac: add of_node_put()

[Sasha Levin]

From: Yangtao Li <tiny.windzz@gmail.com>

[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/pmac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 96a345248224..0add5bb3cee8 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	struct device_node *root = of_find_node_by_path("/");
 	const char *model = of_get_property(root, "model", NULL);
 
+	of_node_put(root);
 	/* Get cable type from device-tree. */
 	if (cable && !strncmp(cable, "80-", 3)) {
 		/* Some drives fail to detect 80c cable in PowerBook */
-- 
2.19.1

[PATCH AUTOSEL 4.4 14/23] clk: mmp: Off by one in mmp_clk_add()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 2e85c57493e391b93445c1e0d530b36b95becc64 ]

The > comparison should be >= or we write one element beyond the end of
the unit->clk_table[] array.

(The unit->clk_table[] array is allocated in the mmp_clk_init() function
and it has unit->nr_clks elements).

Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mmp/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
index 61893fe73251..18b6c9b55b95 100644
--- a/drivers/clk/mmp/clk.c
+++ b/drivers/clk/mmp/clk.c
@@ -182,7 +182,7 @@ void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
 		pr_err("CLK %d has invalid pointer %p\n", id, clk);
 		return;
 	}
-	if (id > unit->nr_clks) {
+	if (id >= unit->nr_clks) {
 		pr_err("CLK %d is invalid\n", id);
 		return;
 	}
-- 
2.19.1

[PATCH AUTOSEL 4.4 15/23] Input: omap-keypad - fix keyboard debounce configuration

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ]

I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.

This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 6639b2b8528a..f78c464899db 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -60,8 +60,18 @@
 
 /* OMAP4 values */
 #define OMAP4_VAL_IRQDISABLE		0x0
-#define OMAP4_VAL_DEBOUNCINGTIME	0x7
-#define OMAP4_VAL_PVT			0x7
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
 
 enum {
 	KBD_REVISION_OMAP4 = 0,
@@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
 			OMAP4_DEF_CTRL_NOSOFTMODE |
-			(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
 	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
-			OMAP4_VAL_DEBOUNCINGTIME);
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
-- 
2.19.1

[PATCH AUTOSEL 4.4 16/23] libata: whitelist all SAMSUNG MZ7KM* solid-state disks

[Sasha Levin]

From: Juha-Matti Tilli <juha-matti.tilli@iki.fi>

[ Upstream commit fd6f32f78645db32b6b95a42e45da2ddd6de0e67 ]

These devices support read zero after trim (RZAT), as they advertise to
the OS. However, the OS doesn't believe the SSDs unless they are
explicitly whitelisted.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ba514fa733de..d543172b20b3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4297,6 +4297,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SSD*INTEL*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "SAMSUNG*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "SAMSUNG*MZ7KM*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "ST[1248][0248]0[FH]*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
 	/*
-- 
2.19.1

[PATCH AUTOSEL 4.4 17/23] net: phy: don't allow __set_phy_supported to add unsupported modes

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1f2f25a71d18..70f26b30729c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1265,20 +1265,17 @@ static int gen10g_resume(struct phy_device *phydev)
 
 static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
 {
-	phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
-			       PHY_10BT_FEATURES);
-
 	switch (max_speed) {
-	default:
-		return -ENOTSUPP;
-	case SPEED_1000:
-		phydev->supported |= PHY_1000BT_FEATURES;
+	case SPEED_10:
+		phydev->supported &= ~PHY_100BT_FEATURES;
 		/* fall through */
 	case SPEED_100:
-		phydev->supported |= PHY_100BT_FEATURES;
-		/* fall through */
-	case SPEED_10:
-		phydev->supported |= PHY_10BT_FEATURES;
+		phydev->supported &= ~PHY_1000BT_FEATURES;
+		break;
+	case SPEED_1000:
+		break;
+	default:
+		return -ENOTSUPP;
 	}
 
 	return 0;
-- 
2.19.1

[PATCH AUTOSEL 4.4 18/23] net: 8139cp: fix a BUG triggered by changing mtu with network traffic

[Sasha Levin]

From: Su Yanjun <suyj.fnst@cn.fujitsu.com>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/8139cp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index deae10d7426d..9b588251f2a7 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -578,6 +578,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	struct cp_private *cp;
 	int handled = 0;
 	u16 status;
+	u16 mask;
 
 	if (unlikely(dev == NULL))
 		return IRQ_NONE;
@@ -585,6 +586,10 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 
 	spin_lock(&cp->lock);
 
+	mask = cpr16(IntrMask);
+	if (!mask)
+		goto out_unlock;
+
 	status = cpr16(IntrStatus);
 	if (!status || (status == 0xFFFF))
 		goto out_unlock;
-- 
2.19.1

[PATCH AUTOSEL 4.4 19/23] mv88e6060: disable hardware level MAC learning

[Sasha Levin]

From: Anderson Luiz Alves <alacn1@gmail.com>

[ Upstream commit a74515604a7b171f2702bdcbd1e231225fb456d0 ]

Disable hardware level MAC learning because it breaks station roaming.
When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.

Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6060.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 0527f485c3dc..973fcd442aea 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -98,8 +98,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
 		  GLOBAL_ATU_CONTROL_SWRESET |
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
@@ -124,13 +123,10 @@ static int mv88e6060_setup_global(struct dsa_switch *ds)
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
 
-	/* Enable automatic address learning, set the address
-	 * database size to 1024 entries, and set the default aging
-	 * time to 5 minutes.
+	/* Disable automatic address learning.
 	 */
 	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
-		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
-		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
+		  GLOBAL_ATU_CONTROL_LEARNDIS);
 
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.4 20/23] ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling

[Sasha Levin]

From: Chris Cole <chris@sageembedded.com>

[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ]

This patch addresses possible memory corruption when
v7_dma_inv_range(start_address, end_address) address parameters are not
aligned to whole cache lines. This function issues "invalidate" cache
management operations to all cache lines from start_address (inclusive)
to end_address (exclusive). When start_address and/or end_address are
not aligned, the start and/or end cache lines are first issued "clean &
invalidate" operation. The assumption is this is done to ensure that any
dirty data addresses outside the address range (but part of the first or
last cache lines) are cleaned/flushed so that data is not lost, which
could happen if just an invalidate is issued.

The problem is that these first/last partial cache lines are issued
"clean & invalidate" and then "invalidate". This second "invalidate" is
not required and worse can cause "lost" writes to addresses outside the
address range but part of the cache line. If another component writes to
its part of the cache line between the "clean & invalidate" and
"invalidate" operations, the write can get lost. This fix is to remove
the extra "invalidate" operation when unaligned addressed are used.

A kernel module is available that has a stress test to reproduce the
issue and a unit test of the updated v7_dma_inv_range(). It can be
downloaded from
http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.

v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction)
when the direction is DMA_FROM_DEVICE. One can (I believe) successfully
argue that DMA from a device to main memory should use buffers aligned
to cache line size, because the "clean & invalidate" might overwrite
data that the device just wrote using DMA. But if a driver does use
unaligned buffers, at least this fix will prevent memory corruption
outside the buffer.

Signed-off-by: Chris Cole <chris@sageembedded.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-v7.S | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a134d8a13d00..11d699af30ed 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -359,14 +359,16 @@ v7_dma_inv_range:
 	ALT_UP(W(nop))
 #endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	addne	r0, r0, r2
 
 	tst	r1, r3
 	bic	r1, r1, r3
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
-1:
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	mcrlo	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr
-- 
2.19.1

[PATCH AUTOSEL 4.4 21/23] cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)

[Sasha Levin]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 6e785302dad32228819d8066e5376acd15d0e6ba ]

Missing a dependency.  Shouldn't show cifs posix extensions
in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1
protocol) is disabled.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index e7b478b49985..8bef27b8f85d 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -111,7 +111,7 @@ config CIFS_XATTR
 
 config CIFS_POSIX
         bool "CIFS POSIX Extensions"
-        depends on CIFS_XATTR
+        depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY && CIFS_XATTR
         help
           Enabling this option will cause the cifs client to attempt to
 	  negotiate a newer dialect with servers, such as Samba 3.0.5
-- 
2.19.1

[PATCH AUTOSEL 4.4 22/23] i2c: axxia: properly handle master timeout

[Sasha Levin]

From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@nokia.com>

[ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ]

According to Intel (R) Axxia TM Lionfish Communication Processor
Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module
have a programmable Master Wait Timer, which among others, checks the
time between commands send in manual mode. When a timeout (25ms) passes,
TSS bit is set in Master Interrupt Status register and a Stop command is
issued by the hardware.

The axxia_i2c_xfer(), does not properly handle this situation, however.
For each message a separate axxia_i2c_xfer_msg() is called and this
function incorrectly assumes that any interrupt might happen only when
waiting for completion. This is mostly correct but there is one
exception - a master timeout can trigger if enough time has passed
between individual transfers. It will, by definition, happen between
transfers when the interrupts are disabled by the code. If that happens,
the hardware issues Stop command.

The interrupt indicating timeout will not be triggered as soon as we
enable them since the Master Interrupt Status is cleared when master
mode is entered again (which happens before enabling irqs) meaning this
error is lost and the transfer is continued even though the Stop was
issued on the bus. The subsequent operations completes without error but
a bogus value (0xFF in case of read) is read as the client device is
confused because aborted transfer. No error is returned from
master_xfer() making caller believe that a valid value was read.

To fix the problem, the TSS bit (indicating timeout) in Master Interrupt
Status register is checked before each transfer. If it is set, there was
a timeout before this transfer and (as described above) the hardware
already issued Stop command so the transaction should be aborted thus
-ETIMEOUT is returned from the master_xfer() callback. In order to be
sure no timeout was issued we can't just read the status just before
starting new transaction as there will always be a small window of time
(few CPU cycles at best) where this might still happen. For this reason
we have to temporally disable the timer before checking for TSS bit.
Disabling it will, however, clear the TSS bit so in order to preserve
that information, we have to read it in ISR so we have to ensure that
the TSS interrupt is not masked between transfers of one transaction.
There is no need to call bus recovery or controller reinitialization if
that happens so it's skipped.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-axxia.c | 40 ++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index c335cc7852f9..9c9fd2e87a4b 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -74,8 +74,7 @@
 				 MST_STATUS_ND)
 #define   MST_STATUS_ERR	(MST_STATUS_NAK | \
 				 MST_STATUS_AL  | \
-				 MST_STATUS_IP  | \
-				 MST_STATUS_TSS)
+				 MST_STATUS_IP)
 #define MST_TX_BYTES_XFRD	0x50
 #define MST_RX_BYTES_XFRD	0x54
 #define SCL_HIGH_PERIOD		0x80
@@ -241,7 +240,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
 			 */
 			if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
 				idev->msg_err = -EPROTO;
-				i2c_int_disable(idev, ~0);
+				i2c_int_disable(idev, ~MST_STATUS_TSS);
 				complete(&idev->msg_complete);
 				break;
 			}
@@ -299,14 +298,19 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
 
 	if (status & MST_STATUS_SCC) {
 		/* Stop completed */
-		i2c_int_disable(idev, ~0);
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
 		complete(&idev->msg_complete);
 	} else if (status & MST_STATUS_SNS) {
 		/* Transfer done */
-		i2c_int_disable(idev, ~0);
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
 		if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
 			axxia_i2c_empty_rx_fifo(idev);
 		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_TSS) {
+		/* Transfer timeout */
+		idev->msg_err = -ETIMEDOUT;
+		i2c_int_disable(idev, ~MST_STATUS_TSS);
+		complete(&idev->msg_complete);
 	} else if (unlikely(status & MST_STATUS_ERR)) {
 		/* Transfer error */
 		i2c_int_disable(idev, ~0);
@@ -339,10 +343,10 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	u32 rx_xfer, tx_xfer;
 	u32 addr_1, addr_2;
 	unsigned long time_left;
+	unsigned int wt_value;
 
 	idev->msg = msg;
 	idev->msg_xfrd = 0;
-	idev->msg_err = 0;
 	reinit_completion(&idev->msg_complete);
 
 	if (i2c_m_ten(msg)) {
@@ -382,9 +386,18 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	else if (axxia_i2c_fill_tx_fifo(idev) != 0)
 		int_mask |= MST_STATUS_TFL;
 
+	wt_value = WT_VALUE(readl(idev->base + WAIT_TIMER_CONTROL));
+	/* Disable wait timer temporarly */
+	writel(wt_value, idev->base + WAIT_TIMER_CONTROL);
+	/* Check if timeout error happened */
+	if (idev->msg_err)
+		goto out;
+
 	/* Start manual mode */
 	writel(CMD_MANUAL, idev->base + MST_COMMAND);
 
+	writel(WT_EN | wt_value, idev->base + WAIT_TIMER_CONTROL);
+
 	i2c_int_enable(idev, int_mask);
 
 	time_left = wait_for_completion_timeout(&idev->msg_complete,
@@ -395,13 +408,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
 		dev_warn(idev->dev, "busy after xfer\n");
 
-	if (time_left == 0)
+	if (time_left == 0) {
 		idev->msg_err = -ETIMEDOUT;
-
-	if (idev->msg_err == -ETIMEDOUT)
 		i2c_recover_bus(&idev->adapter);
+		axxia_i2c_init(idev);
+	}
 
-	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
+out:
+	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO &&
+			idev->msg_err != -ETIMEDOUT)
 		axxia_i2c_init(idev);
 
 	return idev->msg_err;
@@ -409,7 +424,7 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 
 static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
 {
-	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC | MST_STATUS_TSS;
 	unsigned long time_left;
 
 	reinit_completion(&idev->msg_complete);
@@ -436,6 +451,9 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	int i;
 	int ret = 0;
 
+	idev->msg_err = 0;
+	i2c_int_enable(idev, MST_STATUS_TSS);
+
 	for (i = 0; ret == 0 && i < num; ++i)
 		ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
 
-- 
2.19.1

[PATCH AUTOSEL 4.4 23/23] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ]

Some AMD based HP laptops have a SMB0001 ACPI device node which does not
define any methods.

This leads to the following error in dmesg:

[    5.222731] cmi: probe of SMB0001:00 failed with error -5

This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case
silencing the error. In case of a failure of the i2c_add_adapter() call
this commit now propagates the error from that call instead of -EIO.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-scmi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index efefcfa24a4c..d2178f701b41 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -364,6 +364,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 {
 	struct acpi_smbus_cmi *smbus_cmi;
 	const struct acpi_device_id *id;
+	int ret;
 
 	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
 	if (!smbus_cmi)
@@ -385,8 +386,10 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
 			    acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
 
-	if (smbus_cmi->cap_info == 0)
+	if (smbus_cmi->cap_info == 0) {
+		ret = -ENODEV;
 		goto err;
+	}
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
 		"SMBus CMI adapter %s",
@@ -397,7 +400,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus_cmi->adapter.dev.parent = &device->dev;
 
-	if (i2c_add_adapter(&smbus_cmi->adapter)) {
+	ret = i2c_add_adapter(&smbus_cmi->adapter);
+	if (ret) {
 		dev_err(&device->dev, "Couldn't register adapter!\n");
 		goto err;
 	}
@@ -407,7 +411,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 err:
 	kfree(smbus_cmi);
 	device->driver_data = NULL;
-	return -EIO;
+	return ret;
 }
 
 static int acpi_smbus_cmi_remove(struct acpi_device *device)
-- 
2.19.1