From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Mike Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
"Antoine Tenart" <antoine.tenart@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>
Subject: [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K
Date: Sun, 16 Dec 2018 10:41:41 +0100 [thread overview]
Message-ID: <20181216094147.6468-1-gregory.clement@bootlin.com> (raw)
Hello,
This is the third version of a series allowing to manage the cpu
clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
by cluster, so actually the clock management is done at cluster level.
As for the other Armada 7K/8K clocks it is possible to have multiple
AP so here again we need to have unique name: the purpose of the second
patch is to share a common code which will be used in 3 drivers.
The last 2 patch enable the driver at dt and platform level and will
be applied through the mvebu subsystem.
Changelog v2->v3:
- Add back the first patch documenting the binding
Changelog v1->v2:
- Header cleanup
- Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
- Use clk_hw instead of clk
- Use regmap_read_poll_timeout
- Use for_each_of_cpu_node
- Remove unnecessary WARN_ON()
- Remove headers from armada_ap_cp_helper.h
- Few other minor cleanup
Gregory CLEMENT (6):
dt-bindings: ap806: add the cluster clock node in the syscon file
clk: mvebu: add helper file for Armada AP and CP clocks
clk: mvebu: add CPU clock driver for Armada 7K/8K
clk: mvebu: ap806: Fix clock name for the cluster
arm64: marvell: enable the Armada 7K/8K CPU clk driver
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
.../arm/marvell/ap806-system-controller.txt | 22 ++
arch/arm64/Kconfig.platforms | 1 +
.../boot/dts/marvell/armada-ap806-quad.dtsi | 4 +
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 +
drivers/clk/mvebu/Kconfig | 8 +
drivers/clk/mvebu/Makefile | 2 +
drivers/clk/mvebu/ap-cpu-clk.c | 259 ++++++++++++++++++
drivers/clk/mvebu/ap806-system-controller.c | 24 +-
drivers/clk/mvebu/armada_ap_cp_helper.c | 30 ++
drivers/clk/mvebu/armada_ap_cp_helper.h | 11 +
drivers/clk/mvebu/cp110-system-controller.c | 32 +--
11 files changed, 357 insertions(+), 42 deletions(-)
create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
--
2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Mike Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, "Jason Cooper" <jason@lakedaemon.net>,
"Andrew Lunn" <andrew@lunn.ch>,
"Antoine Tenart" <antoine.tenart@bootlin.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>
Subject: [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K
Date: Sun, 16 Dec 2018 10:41:41 +0100 [thread overview]
Message-ID: <20181216094147.6468-1-gregory.clement@bootlin.com> (raw)
Hello,
This is the third version of a series allowing to manage the cpu
clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
by cluster, so actually the clock management is done at cluster level.
As for the other Armada 7K/8K clocks it is possible to have multiple
AP so here again we need to have unique name: the purpose of the second
patch is to share a common code which will be used in 3 drivers.
The last 2 patch enable the driver at dt and platform level and will
be applied through the mvebu subsystem.
Changelog v2->v3:
- Add back the first patch documenting the binding
Changelog v1->v2:
- Header cleanup
- Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
- Use clk_hw instead of clk
- Use regmap_read_poll_timeout
- Use for_each_of_cpu_node
- Remove unnecessary WARN_ON()
- Remove headers from armada_ap_cp_helper.h
- Few other minor cleanup
Gregory CLEMENT (6):
dt-bindings: ap806: add the cluster clock node in the syscon file
clk: mvebu: add helper file for Armada AP and CP clocks
clk: mvebu: add CPU clock driver for Armada 7K/8K
clk: mvebu: ap806: Fix clock name for the cluster
arm64: marvell: enable the Armada 7K/8K CPU clk driver
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
.../arm/marvell/ap806-system-controller.txt | 22 ++
arch/arm64/Kconfig.platforms | 1 +
.../boot/dts/marvell/armada-ap806-quad.dtsi | 4 +
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 +
drivers/clk/mvebu/Kconfig | 8 +
drivers/clk/mvebu/Makefile | 2 +
drivers/clk/mvebu/ap-cpu-clk.c | 259 ++++++++++++++++++
drivers/clk/mvebu/ap806-system-controller.c | 24 +-
drivers/clk/mvebu/armada_ap_cp_helper.c | 30 ++
drivers/clk/mvebu/armada_ap_cp_helper.h | 11 +
drivers/clk/mvebu/cp110-system-controller.c | 32 +--
11 files changed, 357 insertions(+), 42 deletions(-)
create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
--
2.19.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2018-12-16 9:42 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-16 9:41 Gregory CLEMENT [this message]
2018-12-16 9:41 ` [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2018-12-17 22:50 ` Rob Herring
2018-12-17 22:50 ` Rob Herring
2018-12-18 15:46 ` Gregory CLEMENT
2018-12-18 15:46 ` Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 2/6] clk: mvebu: add helper file for Armada AP and CP clocks Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 3/6] clk: mvebu: add CPU clock driver for Armada 7K/8K Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 4/6] clk: mvebu: ap806: Fix clock name for the cluster Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 5/6] arm64: marvell: enable the Armada 7K/8K CPU clk driver Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2018-12-16 9:41 ` [PATCH v3 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K Gregory CLEMENT
2018-12-16 9:41 ` Gregory CLEMENT
2019-01-10 16:16 ` [PATCH v3 0/6] Add CPU clock support for " Gregory CLEMENT
2019-01-10 16:16 ` Gregory CLEMENT
2019-01-10 16:27 ` Stephen Boyd
2019-01-10 16:27 ` Stephen Boyd
2019-01-10 16:36 ` Gregory CLEMENT
2019-01-10 16:36 ` Gregory CLEMENT
2019-02-13 8:57 ` Gregory CLEMENT
2019-02-13 8:57 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181216094147.6468-1-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.