All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Yong Deng <yong.deng@magewell.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Chen-Yu Tsai <wens@csie.org>,
	linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	linux-amarula@amarulasolutions.com,
	Michael Trimarchi <michael@amarulasolutions.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v4 4/6] arm64: dts: allwinner: a64: Add A64 CSI controller
Date: Tue, 18 Dec 2018 17:03:18 +0530	[thread overview]
Message-ID: <20181218113320.4856-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181218113320.4856-1-jagan@amarulasolutions.com>

Add dts node details for Allwinner A64 CSI controller.

A64 CSI has similar features as like in H3, but the CSI_SCLK
need to update it to 300MHz than default clock rate.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 384c417cb7a2..89a0deb3fe6a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -532,6 +532,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi0";
+			};
+
 			i2c0_pins: i2c0_pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";
@@ -899,6 +905,20 @@
 			status = "disabled";
 		};
 
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Yong Deng <yong.deng-+3dxTMOEIRNWk0Htik3J/w@public.gmane.org>,
	Mauro Carvalho Chehab
	<mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
	Michael Trimarchi
	<michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Cc: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH v4 4/6] arm64: dts: allwinner: a64: Add A64 CSI controller
Date: Tue, 18 Dec 2018 17:03:18 +0530	[thread overview]
Message-ID: <20181218113320.4856-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181218113320.4856-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

Add dts node details for Allwinner A64 CSI controller.

A64 CSI has similar features as like in H3, but the CSI_SCLK
need to update it to 300MHz than default clock rate.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 384c417cb7a2..89a0deb3fe6a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -532,6 +532,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi0";
+			};
+
 			i2c0_pins: i2c0_pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";
@@ -899,6 +905,20 @@
 			status = "disabled";
 		};
 
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3

WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Yong Deng <yong.deng@magewell.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Chen-Yu Tsai <wens@csie.org>,
	linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	linux-amarula@amarulasolutions.com,
	Michael Trimarchi <michael@amarulasolutions.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v4 4/6] arm64: dts: allwinner: a64: Add A64 CSI controller
Date: Tue, 18 Dec 2018 17:03:18 +0530	[thread overview]
Message-ID: <20181218113320.4856-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181218113320.4856-1-jagan@amarulasolutions.com>

Add dts node details for Allwinner A64 CSI controller.

A64 CSI has similar features as like in H3, but the CSI_SCLK
need to update it to 300MHz than default clock rate.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 384c417cb7a2..89a0deb3fe6a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -532,6 +532,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi0";
+			};
+
 			i2c0_pins: i2c0_pins {
 				pins = "PH0", "PH1";
 				function = "i2c0";
@@ -899,6 +905,20 @@
 			status = "disabled";
 		};
 
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3


  parent reply	other threads:[~2018-12-18 11:34 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-18 11:33 [PATCH v4 0/6] media/sun6i: Allwinner A64 CSI support Jagan Teki
2018-12-18 11:33 ` Jagan Teki
2018-12-18 11:33 ` Jagan Teki
2018-12-18 11:33 ` [PATCH v4 1/6] dt-bindings: media: sun6i: Add A64 CSI compatible Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33 ` [PATCH v4 2/6] media: sun6i: Add A64 compatible support Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33 ` [PATCH v4 3/6] media: sun6i: Update default CSI_SCLK for A64 Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 15:23   ` Maxime Ripard
2018-12-18 15:23     ` Maxime Ripard
2018-12-18 15:23     ` Maxime Ripard
2018-12-18 15:38     ` Jagan Teki
2018-12-18 15:38       ` Jagan Teki
2018-12-19 10:07       ` Maxime Ripard
2018-12-19 10:07         ` Maxime Ripard
2018-12-19 10:07         ` Maxime Ripard
2018-12-19 10:42         ` Jagan Teki
2018-12-19 10:42           ` Jagan Teki
2018-12-19 10:42           ` Jagan Teki
2018-12-18 11:33 ` Jagan Teki [this message]
2018-12-18 11:33   ` [PATCH v4 4/6] arm64: dts: allwinner: a64: Add A64 CSI controller Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33 ` [PATCH v4 5/6] arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33 ` [DO NOT MERGE] [PATCH v4 6/6] arm64: dts: allwinner: bananapi-m64: Add HDF5640 camera module Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 11:33   ` Jagan Teki
2018-12-18 15:21 ` [PATCH v4 0/6] media/sun6i: Allwinner A64 CSI support Maxime Ripard
2018-12-18 15:21   ` Maxime Ripard
2018-12-18 15:21   ` Maxime Ripard
2018-12-18 15:28   ` Jagan Teki
2018-12-18 15:28     ` Jagan Teki
2018-12-19 10:24     ` Maxime Ripard
2018-12-19 10:24       ` Maxime Ripard
2018-12-19 10:31       ` Michael Nazzareno Trimarchi
2018-12-19 10:31         ` Michael Nazzareno Trimarchi
2018-12-19 10:31         ` Michael Nazzareno Trimarchi
2018-12-19 10:41       ` Jagan Teki
2018-12-19 10:41         ` Jagan Teki
2018-12-19 10:41         ` Jagan Teki
2018-12-19 15:39         ` Maxime Ripard
2018-12-19 15:39           ` Maxime Ripard
2018-12-19 15:39           ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181218113320.4856-5-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mchehab@kernel.org \
    --cc=michael@amarulasolutions.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --cc=yong.deng@magewell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.