All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Loic Poulain <loic.poulain@gmail.com>,
	linux-bluetooth@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>
Subject: Re: [PATCH v3 01/15] dt-bindings: net: broadcom-bluetooth: Fix external clock names
Date: Tue, 18 Dec 2018 08:58:53 -0600	[thread overview]
Message-ID: <20181218145853.GA15352@bogus> (raw)
In-Reply-To: <20181217040449.31437-2-wens@csie.org>

On Mon, 17 Dec 2018 12:04:35 +0800, Chen-Yu Tsai wrote:
> The Broadcom Bluetooth controllers can take up to two external clocks:
> an external frequency reference, substituting the main crystal, and a
> LPO clock at 32.768 kHz substituting the internal LPO clock.
> 
> In particular, the external LPO clock must be used when the controller
> does not have NVRAM connected, and the main reference frequency is not
> the default 20 MHz. This is described in detail in the datasheet.
> 
> The original "extclk" clock name is ambiguous as to which of these it
> refers to, and some designs might even require both.
> 
> This patch deprecates the existing name, and adds "txco" and "lpo".
> 
> Tested-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../devicetree/bindings/net/broadcom-bluetooth.txt         | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Marcel Holtmann <marcel@holtmann.org>,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	Chen-Yu Tsai <wens@csie.org>,
	Loic Poulain <loic.poulain@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 01/15] dt-bindings: net: broadcom-bluetooth: Fix external clock names
Date: Tue, 18 Dec 2018 08:58:53 -0600	[thread overview]
Message-ID: <20181218145853.GA15352@bogus> (raw)
In-Reply-To: <20181217040449.31437-2-wens@csie.org>

On Mon, 17 Dec 2018 12:04:35 +0800, Chen-Yu Tsai wrote:
> The Broadcom Bluetooth controllers can take up to two external clocks:
> an external frequency reference, substituting the main crystal, and a
> LPO clock at 32.768 kHz substituting the internal LPO clock.
> 
> In particular, the external LPO clock must be used when the controller
> does not have NVRAM connected, and the main reference frequency is not
> the default 20 MHz. This is described in detail in the datasheet.
> 
> The original "extclk" clock name is ambiguous as to which of these it
> refers to, and some designs might even require both.
> 
> This patch deprecates the existing name, and adds "txco" and "lpo".
> 
> Tested-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../devicetree/bindings/net/broadcom-bluetooth.txt         | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Loic Poulain <loic.poulain@gmail.com>,
	linux-bluetooth@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>
Subject: Re: [PATCH v3 01/15] dt-bindings: net: broadcom-bluetooth: Fix external clock names
Date: Tue, 18 Dec 2018 08:58:53 -0600	[thread overview]
Message-ID: <20181218145853.GA15352@bogus> (raw)
In-Reply-To: <20181217040449.31437-2-wens@csie.org>

On Mon, 17 Dec 2018 12:04:35 +0800, Chen-Yu Tsai wrote:
> The Broadcom Bluetooth controllers can take up to two external clocks:
> an external frequency reference, substituting the main crystal, and a
> LPO clock at 32.768 kHz substituting the internal LPO clock.
> 
> In particular, the external LPO clock must be used when the controller
> does not have NVRAM connected, and the main reference frequency is not
> the default 20 MHz. This is described in detail in the datasheet.
> 
> The original "extclk" clock name is ambiguous as to which of these it
> refers to, and some designs might even require both.
> 
> This patch deprecates the existing name, and adds "txco" and "lpo".
> 
> Tested-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../devicetree/bindings/net/broadcom-bluetooth.txt         | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

  reply	other threads:[~2018-12-18 14:59 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-17  4:04 [PATCH v3 00/15] ARM: sunxi: Enable Broadcom-based Bluetooth controllers Chen-Yu Tsai
2018-12-17  4:04 ` Chen-Yu Tsai
2018-12-17  4:04 ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 01/15] dt-bindings: net: broadcom-bluetooth: Fix external clock names Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-18 14:58   ` Rob Herring [this message]
2018-12-18 14:58     ` Rob Herring
2018-12-18 14:58     ` Rob Herring
2018-12-17  4:04 ` [PATCH v3 02/15] dt-bindings: net: broadcom-bluetooth: Add VBAT and VDDIO supplies Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 03/15] dt-bindings: net: broadcom-bluetooth: Add BCM20702A1 compatible string Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 04/15] dt-bindings: net: broadcom-bluetooth: Add BCM4330 " Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 05/15] Bluetooth: hci_bcm: Handle deferred probing for the clock supply Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 06/15] Bluetooth: hci_bcm: Simplify clk_get error handling Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 07/15] Bluetooth: hci_bcm: Use "txco" and "extclk" to get clock reference Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 08/15] Bluetooth: hci_bcm: Add support for LPO clock Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 09/15] Bluetooth: hci_bcm: Add support for regulator supplies Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 10/15] Bluetooth: hci_bcm: Wait for device to come out of reset after power on Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 11/15] Bluetooth: hci_bcm: Add BCM20702A1 variant Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 12/15] Bluetooth: hci_bcm: Add compatible string for BCM4330 Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 13/15] Bluetooth: btbcm: Add default address for BCM43430A0 Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 14/15] ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-17  4:04 ` [PATCH v3 15/15] arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node Chen-Yu Tsai
2018-12-17  4:04   ` Chen-Yu Tsai
2018-12-18 23:50 ` [PATCH v3 00/15] ARM: sunxi: Enable Broadcom-based Bluetooth controllers Marcel Holtmann
2018-12-18 23:50   ` Marcel Holtmann
2018-12-19  9:54   ` Chen-Yu Tsai
2018-12-19  9:54     ` Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181218145853.GA15352@bogus \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=megous@megous.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.