From: Borislav Petkov <bp@alien8.de>
To: Patrick Havelange <patrick.havelange@essensium.com>
Cc: York Sun <york.sun@nxp.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
arnout.vandecappelle@essensium.com,
matthew.weber@rockwellcollins.com
Subject: EDAC: Add mention of LS1021A inside comments of fsl_ddr_edac driver
Date: Wed, 19 Dec 2018 12:23:19 +0100 [thread overview]
Message-ID: <20181219112319.GC18479@zn.tnic> (raw)
On Wed, Dec 19, 2018 at 11:43:23AM +0100, Patrick Havelange wrote:
> The Freescale ddr driver also works on the LS1021A board.
>
> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> ---
> drivers/edac/fsl_ddr_edac.c | 4 ++--
> drivers/edac/fsl_ddr_edac.h | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
> index efc8276d1d9c..5c11f3637651 100644
> --- a/drivers/edac/fsl_ddr_edac.c
> +++ b/drivers/edac/fsl_ddr_edac.c
> @@ -2,8 +2,8 @@
> * Freescale Memory Controller kernel module
> *
> * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
> - * ARM-based Layerscape SoCs including LS2xxx. Originally split
> - * out from mpc85xx_edac EDAC driver.
> + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
> + * split out from mpc85xx_edac EDAC driver.
> *
> * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
> *
> diff --git a/drivers/edac/fsl_ddr_edac.h b/drivers/edac/fsl_ddr_edac.h
> index 4ccee292eff1..589b9b4a5e8a 100644
> --- a/drivers/edac/fsl_ddr_edac.h
> +++ b/drivers/edac/fsl_ddr_edac.h
> @@ -2,8 +2,8 @@
> * Freescale Memory Controller kernel module
> *
> * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
> - * ARM-based Layerscape SoCs including LS2xxx. Originally split
> - * out from mpc85xx_edac EDAC driver.
> + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
> + * split out from mpc85xx_edac EDAC driver.
> *
> * Author: Dave Jiang <djiang@mvista.com>
> *
> --
Applied, thanks.
WARNING: multiple messages have this Message-ID (diff)
From: Borislav Petkov <bp@alien8.de>
To: Patrick Havelange <patrick.havelange@essensium.com>
Cc: York Sun <york.sun@nxp.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
arnout.vandecappelle@essensium.com,
matthew.weber@rockwellcollins.com
Subject: Re: [PATCH] EDAC: Add mention of LS1021A inside comments of fsl_ddr_edac driver
Date: Wed, 19 Dec 2018 12:23:19 +0100 [thread overview]
Message-ID: <20181219112319.GC18479@zn.tnic> (raw)
In-Reply-To: <20181219104323.10324-1-patrick.havelange@essensium.com>
On Wed, Dec 19, 2018 at 11:43:23AM +0100, Patrick Havelange wrote:
> The Freescale ddr driver also works on the LS1021A board.
>
> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
> ---
> drivers/edac/fsl_ddr_edac.c | 4 ++--
> drivers/edac/fsl_ddr_edac.h | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
> index efc8276d1d9c..5c11f3637651 100644
> --- a/drivers/edac/fsl_ddr_edac.c
> +++ b/drivers/edac/fsl_ddr_edac.c
> @@ -2,8 +2,8 @@
> * Freescale Memory Controller kernel module
> *
> * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
> - * ARM-based Layerscape SoCs including LS2xxx. Originally split
> - * out from mpc85xx_edac EDAC driver.
> + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
> + * split out from mpc85xx_edac EDAC driver.
> *
> * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
> *
> diff --git a/drivers/edac/fsl_ddr_edac.h b/drivers/edac/fsl_ddr_edac.h
> index 4ccee292eff1..589b9b4a5e8a 100644
> --- a/drivers/edac/fsl_ddr_edac.h
> +++ b/drivers/edac/fsl_ddr_edac.h
> @@ -2,8 +2,8 @@
> * Freescale Memory Controller kernel module
> *
> * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
> - * ARM-based Layerscape SoCs including LS2xxx. Originally split
> - * out from mpc85xx_edac EDAC driver.
> + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally
> + * split out from mpc85xx_edac EDAC driver.
> *
> * Author: Dave Jiang <djiang@mvista.com>
> *
> --
Applied, thanks.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
next reply other threads:[~2018-12-19 11:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-19 11:23 Borislav Petkov [this message]
2018-12-19 11:23 ` [PATCH] EDAC: Add mention of LS1021A inside comments of fsl_ddr_edac driver Borislav Petkov
-- strict thread matches above, loose matches on Subject: below --
2018-12-19 10:43 Patrick Havelange
2018-12-19 10:43 ` [PATCH] " Patrick Havelange
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181219112319.GC18479@zn.tnic \
--to=bp@alien8.de \
--cc=arnout.vandecappelle@essensium.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matthew.weber@rockwellcollins.com \
--cc=mchehab@kernel.org \
--cc=patrick.havelange@essensium.com \
--cc=york.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.