Re: [PATCH v2 1/4] dt-bindings: display: ssd1307fb: Remove reset-active-low from examples

[Alexandre Belloni <alexandre.belloni@bootlin.com>]

On 20/12/2018 12:13:54+0000, Vokáč Michal wrote:
> The reset-active-low property has been removed brom the binding a while
> ago. So remove it from the examples as well.
> 
> Fixes: 519b4db ("fbdev: ssd1307fb: Remove reset-active-low from the DT binding document")
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> Changes from v1:
>  - Add R-by from Rob
> 
>  Documentation/devicetree/bindings/display/ssd1307fb.txt | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> index 209d931..b67f8ca 100644
> --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
> +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> @@ -36,7 +36,6 @@ ssd1307: oled@3c {
>          reg = <0x3c>;
>          pwms = <&pwm 4 3000>;
>          reset-gpios = <&gpio2 7>;
> -        reset-active-low;
>  };
>  
>  ssd1306: oled@3c {
> @@ -44,7 +43,6 @@ ssd1306: oled@3c {
>          reg = <0x3c>;
>          pwms = <&pwm 4 3000>;
>          reset-gpios = <&gpio2 7>;
> -        reset-active-low;
>          solomon,com-lrremap;
>          solomon,com-invdir;
>          solomon,com-offset = <32>;
> -- 
> 2.1.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com