Re: [PATCH 7/7] riscv: dts: add initial board data for the SiFive HiFive Unleashed

[Rob Herring <robh@kernel.org>]

On Fri, Dec 14, 2018 at 09:21:54PM -0800, Paul Walmsley wrote:
> Add initial board data for the SiFive HiFive Unleashed A00.
> 
> Currently the data populated in this DT file describes the board
> DRAM configuration and the external clock sources that supply the
> PRCI.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> Cc: devicetree@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> ---
>  arch/riscv/boot/dts/Makefile                  |  2 +
>  arch/riscv/boot/dts/sifive/Makefile           |  4 ++
>  .../dts/sifive/hifive-unleashed-a00-fu540.dts | 39 +++++++++++++++++++
>  3 files changed, 45 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/Makefile
>  create mode 100644 arch/riscv/boot/dts/sifive/Makefile
>  create mode 100644 arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
> 
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> new file mode 100644
> index 000000000000..dcc3ada78455
> --- /dev/null
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +subdir-y += sifive
> diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
> new file mode 100644
> index 000000000000..e120ccf5649c
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_SIFIVE) += hifive-unleashed-a00-fu540.dtb
> +
> +
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
> new file mode 100644
> index 000000000000..0c6afabe69e3
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00-fu540.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: Apache-2.0
> +// SPDX-License-Identifier: GPL-2.0-or-later

This should be a single line with: (Apache-2.0 OR GPL-2.0+)

> +/* Copyright (c) 2018 SiFive, Inc */
> +/* See the file LICENSE for further information */
> +
> +/dts-v1/;
> +
> +#include "fu540-c000.dtsi"
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	model = "SiFive HiFive Unleashed A00 (FU540-C000)"
> +	compatible = "sifive,hifive-unleashed-a00-fu540",
> +		"sifive,hifive-unleashed-fu540";

SoC compatible should be here too.

> +
> +	chosen {
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0x1f 0x80000000>;
> +	};
> +
> +	soc {
> +		hfclk: hfclk {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <33333333>;
> +			clock-output-names = "hfclk";
> +		};
> +		rtcclk: rtcclk {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <1000000>;
> +			clock-output-names = "rtcclk";
> +		};

Are these the clock inputs to the SoC or dummy clocks until you write a 
proper clock driver? If the former, they should be at the top level. 

Rob

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv