All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com,
	maarten.lankhorst@intel.com
Subject: Re: [v4 3/4] drm/i915/icl: Enable ICL Pipe CSC block
Date: Fri, 21 Dec 2018 19:31:57 +0200	[thread overview]
Message-ID: <20181221173157.GJ20097@intel.com> (raw)
In-Reply-To: <1545335981-2338-4-git-send-email-uma.shankar@intel.com>

On Fri, Dec 21, 2018 at 01:29:40AM +0530, Uma Shankar wrote:
> Enable ICL pipe csc hardware. CSC block is enabled
> in CSC_MODE register instead of PLANE_COLOR_CTL.
> 
> ToDO: Extend the ABI to accept 32 bit coefficient values
> instead of 16bit for future platforms.
> 
> v2: Addressed Maarten's review comments.
> 
> v3: Addressed Matt's review comments. Removed rmw patterns
> as suggested by Matt.
> 
> v4: Addressed Matt's review comments.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h    |  4 +++-
>  drivers/gpu/drm/i915/intel_color.c | 12 ++++++++++--
>  2 files changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1852c33..565ef6a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9861,7 +9861,9 @@ enum skl_power_gate {
>  #define _PIPE_A_CSC_COEFF_RV_GV	0x49020
>  #define _PIPE_A_CSC_COEFF_BV	0x49024
>  #define _PIPE_A_CSC_MODE	0x49028
> -#define   CSC_BLACK_SCREEN_OFFSET	(1 << 2)
> +#define	  CSC_ENABLE			(1 << 31)
> +#define	  OUTPUT_CSC_ENABLE		(1 << 30)
> +#define	  CSC_BLACK_SCREEN_OFFSET	(1 << 2)

Bogus space->tab change.

We should probably document which bit is for which platforms.

>  #define   CSC_POSITION_BEFORE_GAMMA	(1 << 1)
>  #define   CSC_MODE_YUV_TO_RGB		(1 << 0)
>  #define _PIPE_A_CSC_PREOFF_HI	0x49030
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index e72d8d6..d5b240c 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -134,7 +134,11 @@ static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc *crtc)
>  	I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), POSTOFF_RGB_TO_YUV_HI);
>  	I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), POSTOFF_RGB_TO_YUV_ME);
>  	I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), POSTOFF_RGB_TO_YUV_LO);
> -	I915_WRITE(PIPE_CSC_MODE(pipe), 0);
> +
> +	if (INTEL_GEN(dev_priv) >= 10)

11

> +		I915_WRITE(PIPE_CSC_MODE(pipe), OUTPUT_CSC_ENABLE);
> +	else
> +		I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>  }
>  
>  static void ilk_load_csc_matrix(struct intel_crtc_state *crtc_state)
> @@ -242,7 +246,10 @@ static void ilk_load_csc_matrix(struct intel_crtc_state *crtc_state)
>  		I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
>  		I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
>  
> -		I915_WRITE(PIPE_CSC_MODE(pipe), 0);
> +		if (INTEL_GEN(dev_priv) >= 10)

11

> +			I915_WRITE(PIPE_CSC_MODE(pipe), CSC_ENABLE);
> +		else
> +			I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>  	} else {
>  		uint32_t mode = CSC_MODE_YUV_TO_RGB;
>  
> @@ -715,6 +722,7 @@ void intel_color_init(struct intel_crtc *crtc)
>  		dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>  		dev_priv->display.load_luts = glk_load_luts;
>  	} else if (IS_ICELAKE(dev_priv)) {
> +		dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>  		dev_priv->display.load_luts = icl_load_luts;
>  	} else {
>  		dev_priv->display.load_luts = i9xx_load_luts;
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-12-21 17:32 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-20 19:59 [v4 0/4] Add support for Gen 11 pipe color features Uma Shankar
2018-12-20 19:59 ` [v4 1/4] drm/i915: Remove gamma_mode state variable Uma Shankar
2018-12-21  1:24   ` Matt Roper
2018-12-27 10:14     ` Shankar, Uma
2018-12-21 17:27   ` Ville Syrjälä
2018-12-27 10:15     ` Shankar, Uma
2018-12-20 19:59 ` [v4 2/4] drm/i915/icl: Add icl pipe degamma and gamma support Uma Shankar
2018-12-21  1:24   ` Matt Roper
2018-12-27 13:17     ` Shankar, Uma
2018-12-21 17:38   ` Ville Syrjälä
2018-12-27 13:02     ` Shankar, Uma
2018-12-27  8:18   ` Jani Nikula
2018-12-20 19:59 ` [v4 3/4] drm/i915/icl: Enable ICL Pipe CSC block Uma Shankar
2018-12-21 17:31   ` Ville Syrjälä [this message]
2018-12-27 14:17     ` Shankar, Uma
2018-12-20 19:59 ` [v4 4/4] drm/i915/icl: Add degamma and gamma lut size to gen11 caps Uma Shankar
2018-12-20 20:23 ` ✓ Fi.CI.BAT: success for Add support for Gen 11 pipe color features (rev4) Patchwork
2018-12-21 17:57 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181221173157.GJ20097@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@intel.com \
    --cc=uma.shankar@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.