* [PATCH AUTOSEL 3.18 04/12] Input: omap-keypad - fix idle configuration to not block SoC idle states
2018-12-26 22:57 [PATCH AUTOSEL 3.18 01/12] powerpc: Fix COFF zImage booting on old powermacs Sasha Levin
@ 2018-12-26 22:57 ` Sasha Levin
2018-12-26 22:57 ` Sasha Levin
1 sibling, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2018-12-26 22:57 UTC (permalink / raw)
To: stable, linux-kernel
Cc: Tony Lindgren, Dmitry Torokhov, Sasha Levin, linux-input
From: Tony Lindgren <tony@atomide.com>
[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ]
With PM enabled, I noticed that pressing a key on the droid4 keyboard will
block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT
and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as
suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>.
>From the hardware point of view, looks like we need to manage the registers
for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid
blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE
register now gone with IRQF_ONESHOT, also the SoC idle state problem is
gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in
omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent
blocking deeper SoC idle states after rmmod omap4-keypad.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/keyboard/omap4-keypad.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 1739221aa5fa..75ea1e3e0e91 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -126,12 +126,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
- if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
- /* Disable interrupts */
- kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
- OMAP4_VAL_IRQDISABLE);
+ if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
return IRQ_WAKE_THREAD;
- }
return IRQ_NONE;
}
@@ -173,11 +169,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
- /* enable interrupts */
- kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
- OMAP4_DEF_IRQENABLE_EVENTEN |
- OMAP4_DEF_IRQENABLE_LONGKEY);
-
return IRQ_HANDLED;
}
@@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
disable_irq(keypad_data->irq);
- /* Disable interrupts */
+ /* Disable interrupts and wake-up events */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_VAL_IRQDISABLE);
+ kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
@@ -364,7 +356,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
}
error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
- omap4_keypad_irq_thread_fn, 0,
+ omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
"omap4-keypad", keypad_data);
if (error) {
dev_err(&pdev->dev, "failed to register interrupt\n");
--
2.19.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 3.18 12/12] serial/sunsu: fix refcount leak
2018-12-26 22:57 [PATCH AUTOSEL 3.18 01/12] powerpc: Fix COFF zImage booting on old powermacs Sasha Levin
@ 2018-12-26 22:57 ` Sasha Levin
2018-12-26 22:57 ` Sasha Levin
1 sibling, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2018-12-26 22:57 UTC (permalink / raw)
To: stable, linux-kernel
Cc: Yangtao Li, David S . Miller, Sasha Levin, sparclinux,
linux-serial
From: Yangtao Li <tiny.windzz@gmail.com>
[ Upstream commit d430aff8cd0c57502d873909c184e3b5753f8b88 ]
The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
su_get_type() doesn't do that. The match node are used as an identifier
to compare against the current node, so we can directly drop the refcount
after getting the node from the path as it is not used as pointer.
Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/sunsu.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 5326ae195e5f..298c11556850 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1380,22 +1380,43 @@ static inline struct console *SUNSU_CONSOLE(void)
static enum su_type su_get_type(struct device_node *dp)
{
struct device_node *ap = of_find_node_by_path("/aliases");
+ enum su_type rc = SU_PORT_PORT;
if (ap) {
const char *keyb = of_get_property(ap, "keyboard", NULL);
const char *ms = of_get_property(ap, "mouse", NULL);
+ struct device_node *match;
if (keyb) {
- if (dp == of_find_node_by_path(keyb))
- return SU_PORT_KBD;
+ match = of_find_node_by_path(keyb);
+
+ /*
+ * The pointer is used as an identifier not
+ * as a pointer, we can drop the refcount on
+ * the of__node immediately after getting it.
+ */
+ of_node_put(match);
+
+ if (dp == match) {
+ rc = SU_PORT_KBD;
+ goto out;
+ }
}
if (ms) {
- if (dp == of_find_node_by_path(ms))
- return SU_PORT_MS;
+ match = of_find_node_by_path(ms);
+
+ of_node_put(match);
+
+ if (dp == match) {
+ rc = SU_PORT_MS;
+ goto out;
+ }
}
}
- return SU_PORT_PORT;
+out:
+ of_node_put(ap);
+ return rc;
}
static int su_probe(struct platform_device *op)
--
2.19.1
^ permalink raw reply related [flat|nested] 4+ messages in thread