All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Viorel Suman <viorel.suman@nxp.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Timur Tabi <timur@kernel.org>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	dl-linux-imx <linux-imx@nxp.com>
Subject: Re: [RFC PATCH] ASoC: fsl: Add Audio Mixer CPU DAI driver
Date: Fri, 28 Dec 2018 17:32:26 -0600	[thread overview]
Message-ID: <20181228233226.GA11728@bogus> (raw)
In-Reply-To: <1545150569-14897-1-git-send-email-viorel.suman@nxp.com>

On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote:
> This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs.
> The Audio Mixer is a on-chip functional module that allows mixing of
> two audio streams into a single audio stream.
> 
> Audio Mixer datasheet is available here:
> https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf
> 
> Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
> ---
>  .../devicetree/bindings/sound/fsl,amix.txt         |  45 ++

This should be a separate patch.

>  sound/soc/fsl/Kconfig                              |   7 +
>  sound/soc/fsl/Makefile                             |   3 +
>  sound/soc/fsl/fsl_amix.c                           | 554 +++++++++++++++++++++
>  sound/soc/fsl/fsl_amix.h                           | 101 ++++
>  5 files changed, 710 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,amix.txt
>  create mode 100644 sound/soc/fsl/fsl_amix.c
>  create mode 100644 sound/soc/fsl/fsl_amix.h
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> new file mode 100644
> index 0000000..049144f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> @@ -0,0 +1,45 @@
> +NXP Audio Mixer (AMIX).
> +
> +The Audio Mixer is a on-chip functional module that allows mixing of two
> +audio streams into a single audio stream. Audio Mixer has two input serial
> +audio interfaces. These are driven by two Synchronous Audio interface
> +modules (SAI). Each input serial interface carries 8 audio channels in its
> +frame in TDM manner. Mixer mixes audio samples of corresponding channels
> +from two interfaces into a single sample. Before mixing, audio samples of
> +two inputs can be attenuated based on configuration. The output of the
> +Audio Mixer is also a serial audio interface. Like input interfaces it has
> +the same TDM frame format. This output is used to drive the serial DAC TDM
> +interface of audio codec and also sent to the external pins along with the
> +receive path of normal audio SAI module for readback by the CPU.
> +
> +The output of Audio mixer can be selected from any of the three streams
> + - serial audio input 1
> + - serial audio input 2
> + - Mixed audio
> +
> +Mixing operation is independent of audio sample rate but the two audio
> +input streams must have same audio sample rate with same number of channels
> +in TDM frame to be eligible for mixing.
> +
> +Device driver required properties:
> +=================================
> +  - compatible		: Compatible list, contains "fsl,imx8qm-amix"
> +
> +  - reg			: Offset and length of the register set for the device.
> +
> +  - clocks		: Must contain an entry for each entry in clock-names.
> +
> +  - clock-names		: Must include the "ipg" for register access.

Humm, no audio related clocks? 

> +
> +  - power-domains	: Must contain the phandle to the AMIX power domain node
> +
> +Device driver configuration example:
> +======================================
> +  amix: amix@59840000 {
> +    compatible = "fsl,imx8qm-amix";
> +    reg = <0x0 0x59840000 0x0 0x10000>;
> +    clocks = <&clk IMX8QXP_AUD_AMIX_IPG>;
> +    clock-names = "ipg";
> +    power-domains = <&pd_amix>;
> +  };
> +

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Viorel Suman <viorel.suman@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	Timur Tabi <timur@kernel.org>, Xiubo Li <Xiubo.Lee@gmail.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Mark Brown <broonie@kernel.org>, dl-linux-imx <linux-imx@nxp.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Jaroslav Kysela <perex@perex.cz>,
	Daniel Baluta <daniel.baluta@nxp.com>
Subject: Re: [RFC PATCH] ASoC: fsl: Add Audio Mixer CPU DAI driver
Date: Fri, 28 Dec 2018 17:32:26 -0600	[thread overview]
Message-ID: <20181228233226.GA11728@bogus> (raw)
In-Reply-To: <1545150569-14897-1-git-send-email-viorel.suman@nxp.com>

On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote:
> This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs.
> The Audio Mixer is a on-chip functional module that allows mixing of
> two audio streams into a single audio stream.
> 
> Audio Mixer datasheet is available here:
> https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf
> 
> Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
> ---
>  .../devicetree/bindings/sound/fsl,amix.txt         |  45 ++

This should be a separate patch.

>  sound/soc/fsl/Kconfig                              |   7 +
>  sound/soc/fsl/Makefile                             |   3 +
>  sound/soc/fsl/fsl_amix.c                           | 554 +++++++++++++++++++++
>  sound/soc/fsl/fsl_amix.h                           | 101 ++++
>  5 files changed, 710 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/fsl,amix.txt
>  create mode 100644 sound/soc/fsl/fsl_amix.c
>  create mode 100644 sound/soc/fsl/fsl_amix.h
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> new file mode 100644
> index 0000000..049144f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt
> @@ -0,0 +1,45 @@
> +NXP Audio Mixer (AMIX).
> +
> +The Audio Mixer is a on-chip functional module that allows mixing of two
> +audio streams into a single audio stream. Audio Mixer has two input serial
> +audio interfaces. These are driven by two Synchronous Audio interface
> +modules (SAI). Each input serial interface carries 8 audio channels in its
> +frame in TDM manner. Mixer mixes audio samples of corresponding channels
> +from two interfaces into a single sample. Before mixing, audio samples of
> +two inputs can be attenuated based on configuration. The output of the
> +Audio Mixer is also a serial audio interface. Like input interfaces it has
> +the same TDM frame format. This output is used to drive the serial DAC TDM
> +interface of audio codec and also sent to the external pins along with the
> +receive path of normal audio SAI module for readback by the CPU.
> +
> +The output of Audio mixer can be selected from any of the three streams
> + - serial audio input 1
> + - serial audio input 2
> + - Mixed audio
> +
> +Mixing operation is independent of audio sample rate but the two audio
> +input streams must have same audio sample rate with same number of channels
> +in TDM frame to be eligible for mixing.
> +
> +Device driver required properties:
> +=================================
> +  - compatible		: Compatible list, contains "fsl,imx8qm-amix"
> +
> +  - reg			: Offset and length of the register set for the device.
> +
> +  - clocks		: Must contain an entry for each entry in clock-names.
> +
> +  - clock-names		: Must include the "ipg" for register access.

Humm, no audio related clocks? 

> +
> +  - power-domains	: Must contain the phandle to the AMIX power domain node
> +
> +Device driver configuration example:
> +======================================
> +  amix: amix@59840000 {
> +    compatible = "fsl,imx8qm-amix";
> +    reg = <0x0 0x59840000 0x0 0x10000>;
> +    clocks = <&clk IMX8QXP_AUD_AMIX_IPG>;
> +    clock-names = "ipg";
> +    power-domains = <&pd_amix>;
> +  };
> +

  parent reply	other threads:[~2018-12-28 23:32 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-18 16:30 [RFC PATCH] ASoC: fsl: Add Audio Mixer CPU DAI driver Viorel Suman
2018-12-26 17:24 ` Nicolin Chen
2018-12-26 17:24   ` Nicolin Chen
2018-12-26 17:24   ` Nicolin Chen
2019-01-03 15:56   ` Viorel Suman
2019-01-03 15:56     ` Viorel Suman
2019-01-03 15:56     ` Viorel Suman
2019-01-03 18:25     ` Rob Herring
2019-01-03 18:25       ` Rob Herring
2019-01-03 18:25       ` Rob Herring
2019-01-03 19:21       ` Viorel Suman
2019-01-03 19:21         ` Viorel Suman
2019-01-03 19:21         ` Viorel Suman
2019-01-03 20:03     ` Nicolin Chen
2019-01-03 20:03       ` Nicolin Chen
2019-01-04  8:52       ` Viorel Suman
2019-01-04  8:52         ` Viorel Suman
2019-01-04  8:52         ` Viorel Suman
2018-12-28 23:32 ` Rob Herring [this message]
2018-12-28 23:32   ` Rob Herring
2019-01-03 13:47   ` Viorel Suman
2019-01-03 13:47     ` Viorel Suman
2019-01-03 13:47     ` Viorel Suman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181228233226.GA11728@bogus \
    --to=robh@kernel.org \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    --cc=viorel.suman@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.