From: Anup Patel <anup@brainfault.org>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <anup.patel@wdc.com>,
linux-kernel@vger.kernel.org,
Christoph Hellwig <hch@infradead.org>,
Atish Patra <atish.patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org
Subject: [PATCH 4/5] RISC-V: Move setup_vm() to mm/init.c
Date: Mon, 7 Jan 2019 21:40:46 +0530 [thread overview]
Message-ID: <20190107161047.10516-5-anup@brainfault.org> (raw)
In-Reply-To: <20190107161047.10516-1-anup@brainfault.org>
From: Anup Patel <anup.patel@wdc.com>
The setup_vm() is responsible for setting up initial
page table hence should be placed in mm/init.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/kernel/setup.c | 49 --------------------------------------
arch/riscv/mm/init.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+), 49 deletions(-)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 49a13b98e13f..e9c7f1a6db5a 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -102,55 +102,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
#endif /* CONFIG_BLK_DEV_INITRD */
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
-pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
-pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-#endif
-
-asmlinkage void __init setup_vm(void)
-{
- extern char _start;
- uintptr_t i;
- uintptr_t pa = (uintptr_t) &_start;
- pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
-
- va_pa_offset = PAGE_OFFSET - pa;
- pfn_base = PFN_DOWN(pa);
-
- /* Sanity check alignment and size */
- BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
- BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
-
-#ifndef __PAGETABLE_PMD_FOLDED
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
- __pgprot(_PAGE_TABLE));
- trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
- __pgprot(_PAGE_TABLE));
- }
- for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
- swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
-#else
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
- }
-#endif
-}
-
void __init parse_dtb(unsigned int hartid, void *dtb)
{
early_init_dt_scan(__va(dtb));
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index d0965979ee70..b487f76d6060 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -102,3 +102,53 @@ void __init setup_bootmem(void)
&memblock.memory, 0);
}
}
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
+pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
+pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#endif
+
+asmlinkage void __init setup_vm(void)
+{
+ extern char _start;
+ size_t o;
+ uintptr_t i;
+ uintptr_t pa = (uintptr_t) &_start;
+ pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
+
+ va_pa_offset = PAGE_OFFSET - pa;
+ pfn_base = PFN_DOWN(pa);
+
+ /* Sanity check alignment and size */
+ BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
+ BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
+ __pgprot(_PAGE_TABLE));
+ trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
+ __pgprot(_PAGE_TABLE));
+ }
+ for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
+ swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
+#else
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
+ }
+#endif
+}
--
2.17.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <anup@brainfault.org>
To: Palmer Dabbelt <palmer@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>
Cc: Atish Patra <atish.patra@wdc.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Christoph Hellwig <hch@infradead.org>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Anup Patel <anup.patel@wdc.com>
Subject: [PATCH 4/5] RISC-V: Move setup_vm() to mm/init.c
Date: Mon, 7 Jan 2019 21:40:46 +0530 [thread overview]
Message-ID: <20190107161047.10516-5-anup@brainfault.org> (raw)
In-Reply-To: <20190107161047.10516-1-anup@brainfault.org>
From: Anup Patel <anup.patel@wdc.com>
The setup_vm() is responsible for setting up initial
page table hence should be placed in mm/init.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
---
arch/riscv/kernel/setup.c | 49 --------------------------------------
arch/riscv/mm/init.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+), 49 deletions(-)
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 49a13b98e13f..e9c7f1a6db5a 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -102,55 +102,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
#endif /* CONFIG_BLK_DEV_INITRD */
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
-pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
-pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
-#endif
-
-asmlinkage void __init setup_vm(void)
-{
- extern char _start;
- uintptr_t i;
- uintptr_t pa = (uintptr_t) &_start;
- pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
-
- va_pa_offset = PAGE_OFFSET - pa;
- pfn_base = PFN_DOWN(pa);
-
- /* Sanity check alignment and size */
- BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
- BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
-
-#ifndef __PAGETABLE_PMD_FOLDED
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
- __pgprot(_PAGE_TABLE));
- trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
- __pgprot(_PAGE_TABLE));
- }
- for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
- swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
-#else
- trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
- pfn_pgd(PFN_DOWN(pa), prot);
-
- for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
- size_t o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
- swapper_pg_dir[o] =
- pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
- }
-#endif
-}
-
void __init parse_dtb(unsigned int hartid, void *dtb)
{
early_init_dt_scan(__va(dtb));
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index d0965979ee70..b487f76d6060 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -102,3 +102,53 @@ void __init setup_bootmem(void)
&memblock.memory, 0);
}
}
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define NUM_SWAPPER_PMDS ((uintptr_t)-PAGE_OFFSET >> PGDIR_SHIFT)
+pmd_t swapper_pmd[PTRS_PER_PMD*((-PAGE_OFFSET)/PGDIR_SIZE)] __page_aligned_bss;
+pmd_t trampoline_pmd[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#endif
+
+asmlinkage void __init setup_vm(void)
+{
+ extern char _start;
+ size_t o;
+ uintptr_t i;
+ uintptr_t pa = (uintptr_t) &_start;
+ pgprot_t prot = __pgprot(pgprot_val(PAGE_KERNEL) | _PAGE_EXEC);
+
+ va_pa_offset = PAGE_OFFSET - pa;
+ pfn_base = PFN_DOWN(pa);
+
+ /* Sanity check alignment and size */
+ BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
+ BUG_ON((pa % (PAGE_SIZE * PTRS_PER_PTE)) != 0);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN((uintptr_t)trampoline_pmd),
+ __pgprot(_PAGE_TABLE));
+ trampoline_pmd[0] = pfn_pmd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN((uintptr_t)swapper_pmd) + i,
+ __pgprot(_PAGE_TABLE));
+ }
+ for (i = 0; i < ARRAY_SIZE(swapper_pmd); i++)
+ swapper_pmd[i] = pfn_pmd(PFN_DOWN(pa + i * PMD_SIZE), prot);
+#else
+ trampoline_pg_dir[(PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD] =
+ pfn_pgd(PFN_DOWN(pa), prot);
+
+ for (i = 0; i < (-PAGE_OFFSET)/PGDIR_SIZE; ++i) {
+ o = (PAGE_OFFSET >> PGDIR_SHIFT) % PTRS_PER_PGD + i;
+ swapper_pg_dir[o] =
+ pfn_pgd(PFN_DOWN(pa + i * PGDIR_SIZE), prot);
+ }
+#endif
+}
--
2.17.1
next prev parent reply other threads:[~2019-01-07 16:11 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-07 16:10 [PATCH 0/5] Fixmap support and MM cleanups Anup Patel
2019-01-07 16:10 ` Anup Patel
2019-01-07 16:10 ` [PATCH 1/5] RISC-V: Move free_initrd_mem() to kernel/setup.c Anup Patel
2019-01-07 16:10 ` Anup Patel
2019-01-15 13:43 ` Christoph Hellwig
2019-01-15 13:43 ` Christoph Hellwig
2019-01-19 10:34 ` Anup Patel
2019-01-19 10:34 ` Anup Patel
2019-01-07 16:10 ` [PATCH 2/5] RISC-V: Setup init_mm before parse_early_param() Anup Patel
2019-01-07 16:10 ` Anup Patel
2019-01-15 13:44 ` Christoph Hellwig
2019-01-15 13:44 ` Christoph Hellwig
2019-01-19 10:42 ` Anup Patel
2019-01-19 10:42 ` Anup Patel
2019-01-07 16:10 ` [PATCH 3/5] RISC-V: Move setup_bootmem() to mm/init.c Anup Patel
2019-01-07 16:10 ` Anup Patel
2019-01-15 13:44 ` Christoph Hellwig
2019-01-15 13:44 ` Christoph Hellwig
2019-01-19 10:43 ` Anup Patel
2019-01-19 10:43 ` Anup Patel
2019-01-07 16:10 ` Anup Patel [this message]
2019-01-07 16:10 ` [PATCH 4/5] RISC-V: Move setup_vm() " Anup Patel
2019-01-15 13:45 ` Christoph Hellwig
2019-01-15 13:45 ` Christoph Hellwig
2019-01-07 16:10 ` [PATCH 5/5] RISC-V: Implement compile-time fixed mappings Anup Patel
2019-01-07 16:10 ` Anup Patel
2019-01-15 13:47 ` Christoph Hellwig
2019-01-15 13:47 ` Christoph Hellwig
2019-01-19 10:44 ` Anup Patel
2019-01-19 10:44 ` Anup Patel
2019-01-19 11:44 ` Anup Patel
2019-01-19 11:44 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190107161047.10516-5-anup@brainfault.org \
--to=anup@brainfault.org \
--cc=anup.patel@wdc.com \
--cc=aou@eecs.berkeley.edu \
--cc=atish.patra@wdc.com \
--cc=hch@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.