Re: [PATCH V5 2/4] arm64: dts: imx: add imx8qxp support

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Dec 17, 2018 at 03:00:56PM +0000, Aisheng Dong wrote:
> i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful
> graphic and multimedia features. This patch adds the core SoC dtsi
> file support.
> 
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: devicetree@vger.kernel.org
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> v4->v5:
>  * no changes
> v3->v4:
>  * update to new power domain binding
>    power domain subnodes removed from dts
>  * add LPCG clock nodes
>  * clock ID updated accordingly
> v2->v3:
>  * add more SoC specific compatible string to IP nodes
>  * move memory node into board dts
>  * change pd reg value into hex
>  * add more explanation about SoC in commit message
>  * add external clocks
>  * remove pmu compatible string which is not supported
> v1->v2:
>  * mu binding usage update
>  * no define for node address
>  * do not use '_' for node name
>  * drop 'fsl-' prefix for imx dtsi
>  * no defines for unit address
>  * generic node names
>  * range map for 32bit register
>  * separate board dts
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt |   4 +

Please separate the bindings from dts patch.  We are moving to
json-schema format.  The fsl.txt has been removed on my for-next branch,
so you need to patch fsl.yaml instead.

>  arch/arm64/boot/dts/freescale/imx8-ca35.dtsi  |  61 ++++
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 409 ++++++++++++++++++++++++++
>  3 files changed, 474 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8-ca35.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index 7fbc424..9b5be3e 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -131,6 +131,10 @@ i.MX7ULP generic board
>  Required root node properties:
>      - compatible = "fsl,imx7ulp";
>  
> +i.MX8QXP generic board
> +Required root node properties:
> +    - compatible = "fsl,imx8qxp";
> +
>  Freescale Vybrid Platform Device Tree Bindings
>  ----------------------------------------------
>  
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi b/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi
> new file mode 100644
> index 0000000..c79e97a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ca35.dtsi

Can you explain it a bit in commit log why we need to have a separate
imx8-ca35.dtsi?  From naming of the file, it seems there are more imx8
dts files than just imx8qxp.dtsi that will include it?

> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017~2018 NXP
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/{
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		/* We have 1 clusters with 4 Cortex-A35 cores */
> +		A35_0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +		};
> +
> +		A35_1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +		};
> +
> +		A35_2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +		};
> +
> +		A35_3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +		};
> +
> +		A35_L2: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> new file mode 100644
> index 0000000..da99b6f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -0,0 +1,409 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017-2018 NXP
> + *	Dong Aisheng <aisheng.dong@nxp.com>
> + */
> +
> +#include <dt-bindings/clock/imx8qxp-clock.h>
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/pads-imx8qxp.h>
> +
> +#include "imx8-ca35.dtsi"
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &adma_lpuart0;
> +		mmc0 = &usdhc1;
> +		mmc1 = &usdhc2;
> +		mmc2 = &usdhc3;

Please keep them sort alphabetically in alias name.

> +	};
> +
> +	gic: interrupt-controller@51a00000 {
> +		compatible = "arm,gic-v3";
> +		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> +		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
> +	};
> +
> +	xtal32k: clock-xtal32k {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "xtal_32KHz";
> +	};
> +
> +	xtal24m: clock-xtal24m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal_24MHz";
> +	};
> +
> +	scu {
> +		compatible = "fsl,imx-scu";
> +		mbox-names = "tx0", "tx1", "tx2", "tx3",
> +			     "rx0", "rx1", "rx2", "rx3";
> +		mboxes = <&lsio_mu1 0 0
> +			  &lsio_mu1 0 1
> +			  &lsio_mu1 0 2
> +			  &lsio_mu1 0 3
> +			  &lsio_mu1 1 0
> +			  &lsio_mu1 1 1
> +			  &lsio_mu1 1 2
> +			  &lsio_mu1 1 3>;
> +
> +		clk: clock-controller {
> +			compatible = "fsl,imx8qxp-clk";
> +			#clock-cells = <1>;
> +			clocks = <&xtal32k &xtal24m>;
> +			clock-names = "xtal_32KHz", "xtal_24Mhz";
> +		};
> +
> +		iomuxc: pinctrl {
> +			compatible = "fsl,imx8qxp-iomuxc";
> +		};
> +
> +		pd: imx8qx-pd {
> +			compatible = "fsl,imx8qxp-scu-pd";
> +			#power-domain-cells = <1>;
> +		};
> +	};
> +
> +	adma_subsys: bus@59000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x59000000 0x0 0x59000000 0x2000000>;
> +
> +		adma_lpcg: clock-controller@59000000 {
> +			compatible = "fsl,imx8qxp-lpcg-adma";
> +			reg = <0x59000000 0x2000000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		adma_lpuart0: serial@5a060000 {
> +			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> +			reg = <0x5a060000 0x1000>;
> +			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_UART0_BAUD_CLK>;
> +			clock-names = "ipg";
> +			power-domains = <&pd IMX_SC_R_UART_0>;
> +			status = "disabled";
> +		};
> +
> +		adma_i2c0: i2c@5a800000 {
> +			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> +			reg = <0x5a800000 0x4000>;
> +			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C0_CLK>;
> +			clock-names = "per";
> +			assigned-clocks = <&clk IMX8QXP_ADMA_I2C0_CLK>;
> +			assigned-clock-rates = <24000000>;
> +			power-domains = <&pd IMX_SC_R_I2C_0>;
> +			status = "disabled";
> +		};
> +
> +		adma_i2c1: i2c@5a810000 {
> +			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> +			reg = <0x5a810000 0x4000>;
> +			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C1_CLK>;
> +			clock-names = "per";
> +			assigned-clocks = <&clk IMX8QXP_ADMA_I2C1_CLK>;
> +			assigned-clock-rates = <24000000>;
> +			power-domains = <&pd IMX_SC_R_I2C_1>;
> +			status = "disabled";
> +		};
> +
> +		adma_i2c2: i2c@5a820000 {
> +			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> +			reg = <0x5a820000 0x4000>;
> +			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C2_CLK>;
> +			clock-names = "per";
> +			assigned-clocks = <&clk IMX8QXP_ADMA_I2C2_CLK>;
> +			assigned-clock-rates = <24000000>;
> +			power-domains = <&pd IMX_SC_R_I2C_2>;
> +			status = "disabled";
> +		};
> +
> +		adma_i2c3: i2c@5a830000 {
> +			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> +			reg = <0x5a830000 0x4000>;
> +			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-parent = <&gic>;
> +			clocks = <&adma_lpcg IMX8QXP_ADMA_LPCG_I2C3_CLK>;
> +			clock-names = "per";
> +			assigned-clocks = <&clk IMX8QXP_ADMA_I2C3_CLK>;
> +			assigned-clock-rates = <24000000>;
> +			power-domains = <&pd IMX_SC_R_I2C_3>;
> +			status = "disabled";
> +		};
> +	};
> +
> +	conn_subsys: bus@5b000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
> +
> +		conn_lpcg: clock-controller@5b200000 {
> +			compatible = "fsl,imx8qxp-lpcg-conn";
> +			reg = <0x5b200000 0xb0000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		usdhc1: mmc@5b010000 {
> +			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
> +			reg = <0x5b010000 0x10000>;
> +			clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
> +			clock-names = "ipg", "per", "ahb";
> +			assigned-clocks = <&clk IMX8QXP_CONN_SDHC0_CLK>;
> +			assigned-clock-rates = <200000000>;
> +			power-domains = <&pd IMX_SC_R_SDHC_0>;
> +			status = "disabled";
> +		};
> +
> +		usdhc2: mmc@5b020000 {
> +			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
> +			reg = <0x5b020000 0x10000>;
> +			clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_IPG_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_PER_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC1_HCLK>;
> +			clock-names = "ipg", "per", "ahb";
> +			assigned-clocks = <&clk IMX8QXP_CONN_SDHC1_CLK>;
> +			assigned-clock-rates = <200000000>;
> +			power-domains = <&pd IMX_SC_R_SDHC_1>;
> +			fsl,tuning-start-tap = <20>;
> +			fsl,tuning-step= <2>;
> +			status = "disabled";
> +		};
> +
> +		usdhc3: mmc@5b030000 {
> +			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
> +			reg = <0x5b030000 0x10000>;
> +			clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_IPG_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_PER_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC2_HCLK>;
> +			clock-names = "ipg", "per", "ahb";
> +			assigned-clocks = <&clk IMX8QXP_CONN_SDHC2_CLK>;
> +			assigned-clock-rates = <200000000>;
> +			power-domains = <&pd IMX_SC_R_SDHC_2>;
> +			status = "disabled";
> +		};
> +
> +		fec1: ethernet@5b040000 {
> +			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
> +			reg = <0x5b040000 0x10000>;
> +			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_IPG_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_AHB_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_TX_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET0_ROOT_CLK>;
> +			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
> +			fsl,num-tx-queues=<3>;
> +			fsl,num-rx-queues=<3>;
> +			power-domains = <&pd IMX_SC_R_ENET_0>;
> +			status = "disabled";
> +		};
> +
> +		fec2: ethernet@5b050000 {
> +			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
> +			reg = <0x5b050000 0x10000>;
> +			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_IPG_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_AHB_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_TX_CLK>,
> +				 <&conn_lpcg IMX8QXP_CONN_LPCG_ENET1_ROOT_CLK>;
> +			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
> +			fsl,num-tx-queues=<3>;
> +			fsl,num-rx-queues=<3>;
> +			power-domains = <&pd IMX_SC_R_ENET_1>;
> +			status = "disabled";
> +		};
> +	};
> +
> +	db_subsys: bus@5c000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
> +
> +		ddr_pmu0: pmu@5c020000 {
> +			reg = <0x5c020000 0x10000>;
> +		};

How is it used?  It doesn't even have a compatible.

Shawn

> +	};
> +
> +	lsio_subsys: bus@5d000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
> +
> +		lsio_lpcg: clock-controller@5d400000 {
> +			compatible = "fsl,imx8qxp-lpcg-lsio";
> +			reg = <0x5d400000 0x400000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		lsio_mu0: mailbox@5d1b0000 {
> +			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> +			reg = <0x5d1b0000 0x10000>;
> +			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		lsio_mu1: mailbox@5d1c0000 {
> +			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> +			reg = <0x5d1c0000 0x10000>;
> +			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <2>;
> +		};
> +
> +		lsio_mu3: mailbox@5d1e0000 {
> +			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> +			reg = <0x5d1e0000 0x10000>;
> +			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		lsio_mu4: mailbox@5d1f0000 {
> +			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> +			reg = <0x5d1f0000 0x10000>;
> +			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> +			#mbox-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		lsio_gpio0: gpio@5d080000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d080000 0x10000>;
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_0>;
> +		};
> +
> +		lsio_gpio1: gpio@5d090000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d090000 0x10000>;
> +			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_1>;
> +		};
> +
> +		lsio_gpio2: gpio@5d0a0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0a0000 0x10000>;
> +			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_2>;
> +		};
> +
> +		lsio_gpio3: gpio@5d0b0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0b0000 0x10000>;
> +			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_3>;
> +		};
> +
> +		lsio_gpio4: gpio@5d0c0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0c0000 0x10000>;
> +			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_4>;
> +		};
> +
> +		lsio_gpio5: gpio@5d0d0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0d0000 0x10000>;
> +			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_5>;
> +		};
> +
> +		lsio_gpio6: gpio@5d0e0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0e0000 0x10000>;
> +			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_6>;
> +		};
> +
> +		lsio_gpio7: gpio@5d0f0000 {
> +			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
> +			reg = <0x5d0f0000 0x10000>;
> +			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			power-domains = <&pd IMX_SC_R_GPIO_7>;
> +		};
> +	};
> +
> +	hsio_subsys: bus@5f000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x5f000000 0x0 0x5f000000 0x1000000>;
> +	};
> +};
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel