[PATCH 16/17] ARM: davinci: dm646x: switch to using the clocksource driver

From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 16/17] ARM: davinci: dm646x: switch to using the clocksource driver
Date: Fri, 11 Jan 2019 18:21:33 +0100	[thread overview]
Message-ID: <20190111172134.30147-17-brgl@bgdev.pl> (raw)
In-Reply-To: <20190111172134.30147-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have a proper clocksource driver for davinci. Switch the platform
to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/dm646x.c | 36 ++++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 018315fa9aa9..b3412920da0a 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -27,7 +27,8 @@
 #include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>
 
 #include "asp.h"
 #include "davinci.h"
@@ -498,16 +499,24 @@ static struct davinci_id dm646x_ids[] = {
 	},
 };
 
-/*
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
- */
-static struct davinci_timer_info dm646x_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
+static const struct davinci_timer_cfg dm646x_timer_cfg = {
+	.reg = {
+		.start		= DAVINCI_TIMER0_BASE,
+		.end		= DAVINCI_TIMER0_BASE + SZ_4K,
+		.flags		= IORESOURCE_MEM,
+	},
+	.irq = {
+		{
+			.start	= IRQ_TINT0_TINT12,
+			.end	= IRQ_TINT0_TINT12,
+			.flags	= IORESOURCE_IRQ,
+		},
+		{
+			.start	= IRQ_TINT0_TINT34,
+			.end	= IRQ_TINT0_TINT34,
+			.flags	= IORESOURCE_IRQ,
+		}
+	}
 };
 
 static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
@@ -589,7 +598,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
-	.timer_info		= &dm646x_timer_info,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
@@ -654,6 +662,7 @@ void __init dm646x_init_time(unsigned long ref_clk_rate,
 {
 	void __iomem *pll1, *psc;
 	struct clk *clk;
+	int rv;
 
 	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
 	clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
@@ -667,7 +676,8 @@ void __init dm646x_init_time(unsigned long ref_clk_rate,
 	clk = clk_get(NULL, "timer0");
 	WARN(IS_ERR(clk), "Unable to get the timer clock\n");
 
-	davinci_timer_init(clk);
+	rv = davinci_timer_register(clk, &dm646x_timer_cfg);
+	WARN(rv, "Unable to register the timer: %d\n", rv);
 }
 
 static struct resource dm646x_pll2_resources[] = {
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
