From: Vasily Khoruzhick <anarsoul@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Vasily Khoruzhick <anarsoul@gmail.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-bluetooth@vger.kernel.org
Subject: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
Date: Fri, 18 Jan 2019 09:02:27 -0800 [thread overview]
Message-ID: <20190118170232.16142-4-anarsoul@gmail.com> (raw)
In-Reply-To: <20190118170232.16142-1-anarsoul@gmail.com>
Add binding document for bluetooth part of RTL8723BS/RTL8723CS
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
.../bindings/net/rtl8723bs-bluetooth.txt | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
new file mode 100644
index 000000000000..8357f242ae4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
@@ -0,0 +1,35 @@
+RTL8723BS/RTL8723CS Bluetooth
+---------------------
+
+RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while
+BT is connected over serial. It speaks H5 protocol with few extra commands
+to upload firmware and change module speed.
+
+Required properties:
+
+ - compatible: should be one of the following:
+ * "realtek,rtl8723bs-bt"
+ * "realtek,rtl8723cs-bt"
+Optional properties:
+
+ - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - enable-gpios: GPIO specifier, used to enable the BT module (active high)
+ - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - firmware-postfix: firmware postfix to be used for firmware config
+ - reset-gpios: GPIO specifier, used to reset the BT module (active high)
+
+Example:
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723bs-bt";
+ reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ firmware-postfix="pine64";
+ };
+};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Vasily Khoruzhick <anarsoul@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Vasily Khoruzhick <anarsoul@gmail.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-bluetooth@vger.kernel.org
Subject: [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
Date: Fri, 18 Jan 2019 09:02:27 -0800 [thread overview]
Message-ID: <20190118170232.16142-4-anarsoul@gmail.com> (raw)
In-Reply-To: <20190118170232.16142-1-anarsoul@gmail.com>
Add binding document for bluetooth part of RTL8723BS/RTL8723CS
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
.../bindings/net/rtl8723bs-bluetooth.txt | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
new file mode 100644
index 000000000000..8357f242ae4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
@@ -0,0 +1,35 @@
+RTL8723BS/RTL8723CS Bluetooth
+---------------------
+
+RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while
+BT is connected over serial. It speaks H5 protocol with few extra commands
+to upload firmware and change module speed.
+
+Required properties:
+
+ - compatible: should be one of the following:
+ * "realtek,rtl8723bs-bt"
+ * "realtek,rtl8723cs-bt"
+Optional properties:
+
+ - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - enable-gpios: GPIO specifier, used to enable the BT module (active high)
+ - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - firmware-postfix: firmware postfix to be used for firmware config
+ - reset-gpios: GPIO specifier, used to reset the BT module (active high)
+
+Example:
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723bs-bt";
+ reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ firmware-postfix="pine64";
+ };
+};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-18 17:02 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 17:02 [PATCH 0/8] Add support for rtl8723bs/rtl8723cs bluetooth Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-18 17:02 ` [PATCH 1/8] Bluetooth: Add new quirk for broken local ext features max_page Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-18 17:02 ` [PATCH 2/8] Bluetooth: hci_h5: Add support for reset GPIO Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-18 17:13 ` Chen-Yu Tsai
2019-01-18 17:13 ` Chen-Yu Tsai
2019-01-18 17:02 ` Vasily Khoruzhick [this message]
2019-01-18 17:02 ` [PATCH 3/8] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth Vasily Khoruzhick
2019-02-18 21:10 ` Rob Herring
2019-02-18 21:10 ` Rob Herring
2019-02-18 21:24 ` Vasily Khoruzhick
2019-02-18 21:24 ` Vasily Khoruzhick
2019-02-18 22:08 ` Stefan Wahren
2019-02-18 22:08 ` Stefan Wahren
2019-02-18 22:08 ` Stefan Wahren
2019-02-18 22:10 ` Stefan Wahren
2019-02-18 22:10 ` Stefan Wahren
2019-02-18 22:28 ` Vasily Khoruzhick
2019-02-18 22:28 ` Vasily Khoruzhick
2019-02-19 14:17 ` Rob Herring
2019-02-19 14:17 ` Rob Herring
2019-02-19 21:09 ` David Summers
2019-02-19 21:09 ` David Summers
2019-02-19 21:09 ` David Summers
2019-02-20 2:59 ` Chen-Yu Tsai
2019-02-20 2:59 ` Chen-Yu Tsai
2019-02-22 19:14 ` David Summers
2019-02-22 19:14 ` David Summers
2019-02-22 19:21 ` Vasily Khoruzhick
2019-02-22 19:21 ` Vasily Khoruzhick
2019-02-23 20:16 ` David Summers
2019-02-23 20:16 ` David Summers
2019-02-23 20:16 ` David Summers
2019-03-01 20:15 ` Martin Blumenstingl
2019-03-01 20:15 ` Martin Blumenstingl
2019-03-02 9:28 ` 答复: " 陆朱伟
2019-03-02 9:28 ` 陆朱伟
2019-03-02 16:43 ` Martin Blumenstingl
2019-03-02 16:43 ` Martin Blumenstingl
2019-03-04 5:17 ` 答复: " 陆朱伟
2019-03-04 5:17 ` 陆朱伟
2019-02-19 8:56 ` Stefan Wahren
2019-02-19 8:56 ` Stefan Wahren
2019-02-19 14:14 ` Rob Herring
2019-02-19 14:14 ` Rob Herring
2019-02-19 21:25 ` Vasily Khoruzhick
2019-02-19 21:25 ` Vasily Khoruzhick
2019-06-02 9:33 ` Luca Weiss
2019-06-02 9:33 ` Luca Weiss
2019-01-18 17:02 ` [PATCH 4/8] Bluetooth: hci_h5: Add support for binding RTL8723BS with device tree Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-21 14:44 ` kbuild test robot
2019-01-21 14:44 ` kbuild test robot
2019-01-21 14:44 ` kbuild test robot
2019-01-21 15:09 ` kbuild test robot
2019-01-21 15:09 ` kbuild test robot
2019-01-21 15:09 ` kbuild test robot
2019-01-18 17:02 ` [PATCH 5/8] Bluetooth: btrtl: add support for the RTL8723CS Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-21 14:31 ` kbuild test robot
2019-01-21 14:31 ` kbuild test robot
2019-01-21 14:31 ` kbuild test robot
2019-01-18 17:02 ` [PATCH 6/8] arm64: allwinner: a64: enable Bluetooth On Pinebook Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-18 17:02 ` [PATCH 7/8] DO-NOT-MERGE: arm64: allwinner: a64: enable Bluetooth On Pine64 Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
2019-01-18 17:02 ` [PATCH 8/8] DO-NOT-MERGE: arm64: allwinner: a64: enable Bluetooth On SoPine baseboard Vasily Khoruzhick
2019-01-18 17:02 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118170232.16142-4-anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.