From: Mark Zhang <markz@nvidia.com>
To: lee.jones@linaro.org, linux-kernel@vger.kernel.org
Cc: linux-tegra@vger.kernel.org, Mark Zhang <markz@nvidia.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
Venkat Reddy Talla <vreddytalla@nvidia.com>
Subject: [PATCH 1/2] mfd: max77620: Add backup battery charger support
Date: Wed, 23 Jan 2019 14:56:19 +0800 [thread overview]
Message-ID: <20190123065620.22250-1-markz@nvidia.com> (raw)
Add PMIC configurations for backup battery charger, which
is a constant voltage and constant current style charger
with a series output resistance.
The max77620 register CNFGBBC(addr: 0x04) defines the
parameters of backup battery charger. This patch adds
support for it.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
---
drivers/mfd/max77620.c | 80 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
index d8ddd1a6f304..f58143103185 100644
--- a/drivers/mfd/max77620.c
+++ b/drivers/mfd/max77620.c
@@ -398,6 +398,82 @@ static int max77620_initialise_fps(struct max77620_chip *chip)
return 0;
}
+static int max77620_init_backup_battery_charging(struct max77620_chip *chip)
+{
+ struct device *dev = chip->dev;
+ struct device_node *np;
+ u32 pval;
+ u8 config;
+ int charging_current;
+ int charging_voltage;
+ int resistor;
+ int ret;
+
+ np = of_get_child_by_name(dev->of_node, "backup-battery");
+ if (!np) {
+ dev_info(dev, "Backup battery charging support disabled\n");
+ ret = regmap_update_bits(chip->rmap, MAX77620_REG_CNFGBBC,
+ MAX77620_CNFGBBC_ENABLE, 0);
+ if (ret < 0)
+ dev_err(dev, "Failed to update CNFGBBC: %d\n", ret);
+ return ret;
+ }
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-charging-current", &pval);
+ charging_current = (!ret) ? pval : 50;
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-charging-voltage", &pval);
+ charging_voltage = (!ret) ? pval : 2500000;
+ charging_voltage /= 1000;
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-output-resister", &pval);
+ resistor = (!ret) ? pval : 1000;
+
+ config = MAX77620_CNFGBBC_ENABLE;
+ if (charging_current <= 50)
+ config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 100)
+ config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 200)
+ config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 400)
+ config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 600)
+ config |= 1 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else
+ config |= 2 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+
+ if (charging_current > 100)
+ config |= MAX77620_CNFGBBC_LOW_CURRENT_DISABLE;
+
+ if (charging_voltage <= 2500)
+ config |= 0 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else if (charging_voltage <= 3000)
+ config |= 1 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else if (charging_voltage <= 3300)
+ config |= 2 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else
+ config |= 3 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+
+ if (resistor <= 100)
+ config |= 0 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 1000)
+ config |= 1 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 3000)
+ config |= 2 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 6000)
+ config |= 3 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+
+ ret = regmap_write(chip->rmap, MAX77620_REG_CNFGBBC, config);
+ if (ret < 0)
+ dev_err(dev, "Reg 0x%02x write failed, %d\n",
+ MAX77620_REG_CNFGBBC, ret);
+ return ret;
+}
+
static int max77620_read_es_version(struct max77620_chip *chip)
{
unsigned int val;
@@ -483,6 +559,10 @@ static int max77620_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ ret = max77620_init_backup_battery_charging(chip);
+ if (ret < 0)
+ return ret;
+
ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
mfd_cells, n_mfd_cells, NULL, 0,
regmap_irq_get_domain(chip->top_irq_data));
--
2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Mark Zhang <markz@nvidia.com>
To: <lee.jones@linaro.org>, <linux-kernel@vger.kernel.org>
Cc: <linux-tegra@vger.kernel.org>, Mark Zhang <markz@nvidia.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
Venkat Reddy Talla <vreddytalla@nvidia.com>
Subject: [PATCH 1/2] mfd: max77620: Add backup battery charger support
Date: Wed, 23 Jan 2019 14:56:19 +0800 [thread overview]
Message-ID: <20190123065620.22250-1-markz@nvidia.com> (raw)
Add PMIC configurations for backup battery charger, which
is a constant voltage and constant current style charger
with a series output resistance.
The max77620 register CNFGBBC(addr: 0x04) defines the
parameters of backup battery charger. This patch adds
support for it.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Mark Zhang <markz@nvidia.com>
---
drivers/mfd/max77620.c | 80 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
index d8ddd1a6f304..f58143103185 100644
--- a/drivers/mfd/max77620.c
+++ b/drivers/mfd/max77620.c
@@ -398,6 +398,82 @@ static int max77620_initialise_fps(struct max77620_chip *chip)
return 0;
}
+static int max77620_init_backup_battery_charging(struct max77620_chip *chip)
+{
+ struct device *dev = chip->dev;
+ struct device_node *np;
+ u32 pval;
+ u8 config;
+ int charging_current;
+ int charging_voltage;
+ int resistor;
+ int ret;
+
+ np = of_get_child_by_name(dev->of_node, "backup-battery");
+ if (!np) {
+ dev_info(dev, "Backup battery charging support disabled\n");
+ ret = regmap_update_bits(chip->rmap, MAX77620_REG_CNFGBBC,
+ MAX77620_CNFGBBC_ENABLE, 0);
+ if (ret < 0)
+ dev_err(dev, "Failed to update CNFGBBC: %d\n", ret);
+ return ret;
+ }
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-charging-current", &pval);
+ charging_current = (!ret) ? pval : 50;
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-charging-voltage", &pval);
+ charging_voltage = (!ret) ? pval : 2500000;
+ charging_voltage /= 1000;
+
+ ret = of_property_read_u32(np,
+ "maxim,backup-battery-output-resister", &pval);
+ resistor = (!ret) ? pval : 1000;
+
+ config = MAX77620_CNFGBBC_ENABLE;
+ if (charging_current <= 50)
+ config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 100)
+ config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 200)
+ config |= 0 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 400)
+ config |= 3 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else if (charging_current <= 600)
+ config |= 1 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+ else
+ config |= 2 << MAX77620_CNFGBBC_CURRENT_SHIFT;
+
+ if (charging_current > 100)
+ config |= MAX77620_CNFGBBC_LOW_CURRENT_DISABLE;
+
+ if (charging_voltage <= 2500)
+ config |= 0 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else if (charging_voltage <= 3000)
+ config |= 1 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else if (charging_voltage <= 3300)
+ config |= 2 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+ else
+ config |= 3 << MAX77620_CNFGBBC_VOLTAGE_SHIFT;
+
+ if (resistor <= 100)
+ config |= 0 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 1000)
+ config |= 1 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 3000)
+ config |= 2 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+ else if (resistor <= 6000)
+ config |= 3 << MAX77620_CNFGBBC_RESISTOR_SHIFT;
+
+ ret = regmap_write(chip->rmap, MAX77620_REG_CNFGBBC, config);
+ if (ret < 0)
+ dev_err(dev, "Reg 0x%02x write failed, %d\n",
+ MAX77620_REG_CNFGBBC, ret);
+ return ret;
+}
+
static int max77620_read_es_version(struct max77620_chip *chip)
{
unsigned int val;
@@ -483,6 +559,10 @@ static int max77620_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ ret = max77620_init_backup_battery_charging(chip);
+ if (ret < 0)
+ return ret;
+
ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
mfd_cells, n_mfd_cells, NULL, 0,
regmap_irq_get_domain(chip->top_irq_data));
--
2.19.2
next reply other threads:[~2019-01-23 6:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-23 6:56 Mark Zhang [this message]
2019-01-23 6:56 ` [PATCH 1/2] mfd: max77620: Add backup battery charger support Mark Zhang
2019-01-23 6:56 ` [PATCH 2/2] mfd: max77620: Add low battery monitor support Mark Zhang
2019-01-23 6:56 ` Mark Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190123065620.22250-1-markz@nvidia.com \
--to=markz@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=vreddytalla@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.