All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: jckuo <jckuo@nvidia.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] phy: tegra: xusb: Add support for power supplies
Date: Mon, 28 Jan 2019 09:00:54 +0100	[thread overview]
Message-ID: <20190128080054.GB18124@ulmo> (raw)
In-Reply-To: <786247a4-81d1-9c2e-21b5-258dc818ccb9@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 4315 bytes --]

On Mon, Jan 28, 2019 at 03:22:09PM +0800, jckuo wrote:
> Hi Thierry,
> 
> I think any non-zero return value of
> regulator_bulk_enable()/devm_regulator_bulk_get() means error.
> 
> Thanks,
> 
> JC

Theoretically I think only regulator_bulk_enable() could return a
positive value, but even so it never will in practice because all of the
regulator_enable() (see _regulator_enable()) calls will only ever return
negative error codes.

I can change this and resend if you have strong concerns about this
possibly missing legitimate error cases.

Thierry

> On 1/25/19 7:25 PM, Thierry Reding wrote:
> > From: Thierry Reding <treding@nvidia.com>
> > 
> > Support enabling various supplies needed to provide power to the PLLs
> > and logic used to drive the USB, PCI and SATA pads.
> > 
> > Signed-off-by: Thierry Reding <treding@nvidia.com>
> > ---
> >   drivers/phy/tegra/xusb.c | 34 +++++++++++++++++++++++++++++++++-
> >   drivers/phy/tegra/xusb.h |  5 +++++
> >   2 files changed, 38 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> > index 57a2d08ef6da..e510629f4f1c 100644
> > --- a/drivers/phy/tegra/xusb.c
> > +++ b/drivers/phy/tegra/xusb.c
> > @@ -864,6 +864,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> >   	struct tegra_xusb_padctl *padctl;
> >   	const struct of_device_id *match;
> >   	struct resource *res;
> > +	unsigned int i;
> >   	int err;
> >   	/* for backwards compatibility with old device trees */
> > @@ -901,14 +902,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> >   		goto remove;
> >   	}
> > +	padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
> > +					sizeof(*padctl->supplies), GFP_KERNEL);
> > +	if (!padctl->supplies) {
> > +		err = -ENOMEM;
> > +		goto remove;
> > +	}
> > +
> > +	for (i = 0; i < padctl->soc->num_supplies; i++)
> > +		padctl->supplies[i].supply = padctl->soc->supply_names[i];
> > +
> > +	err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
> > +				      padctl->supplies);
> > +	if (err < 0) {
> > +		dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
> > +		goto remove;
> > +	}
> > +
> >   	err = reset_control_deassert(padctl->rst);
> >   	if (err < 0)
> >   		goto remove;
> > +	err = regulator_bulk_enable(padctl->soc->num_supplies,
> > +				    padctl->supplies);
> > +	if (err < 0) {
> > +		dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
> > +		goto reset;
> > +	}
> > +
> >   	err = tegra_xusb_setup_pads(padctl);
> >   	if (err < 0) {
> >   		dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
> > -		goto reset;
> > +		goto power_down;
> >   	}
> >   	err = tegra_xusb_setup_ports(padctl);
> > @@ -921,6 +946,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> >   remove_pads:
> >   	tegra_xusb_remove_pads(padctl);
> > +power_down:
> > +	regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
> >   reset:
> >   	reset_control_assert(padctl->rst);
> >   remove:
> > @@ -936,6 +963,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
> >   	tegra_xusb_remove_ports(padctl);
> >   	tegra_xusb_remove_pads(padctl);
> > +	err = regulator_bulk_disable(padctl->soc->num_supplies,
> > +				     padctl->supplies);
> > +	if (err < 0)
> > +		dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
> > +
> >   	err = reset_control_assert(padctl->rst);
> >   	if (err < 0)
> >   		dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
> > diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> > index bb60fc09c752..5d5d22f6cb41 100644
> > --- a/drivers/phy/tegra/xusb.h
> > +++ b/drivers/phy/tegra/xusb.h
> > @@ -370,6 +370,9 @@ struct tegra_xusb_padctl_soc {
> >   	} ports;
> >   	const struct tegra_xusb_padctl_ops *ops;
> > +
> > +	const char * const *supply_names;
> > +	unsigned int num_supplies;
> >   };
> >   struct tegra_xusb_padctl {
> > @@ -393,6 +396,8 @@ struct tegra_xusb_padctl {
> >   	unsigned int enable;
> >   	struct clk *clk;
> > +
> > +	struct regulator_bulk_data *supplies;
> >   };
> >   static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2019-01-28  8:00 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-25 11:25 [PATCH 1/5] dt-bindings: phy: tegra: Add Tegra186 support Thierry Reding
2019-01-25 11:25 ` [PATCH 2/5] phy: tegra: xusb: Skip single function lane programming Thierry Reding
2019-01-28  7:06   ` jckuo
2019-01-28  7:06     ` jckuo
2019-01-25 11:25 ` [PATCH 3/5] phy: tegra: xusb: Parse dual-role mode property Thierry Reding
2019-01-28  7:08   ` jckuo
2019-01-28  7:08     ` jckuo
2019-01-25 11:25 ` [PATCH 4/5] phy: tegra: xusb: Add support for power supplies Thierry Reding
2019-01-28  7:22   ` jckuo
2019-01-28  7:22     ` jckuo
2019-01-28  8:00     ` Thierry Reding [this message]
2019-01-29  6:50       ` jckuo
2019-01-29  6:50         ` jckuo
2019-02-05 12:55       ` Kishon Vijay Abraham I
2019-02-05 12:55         ` Kishon Vijay Abraham I
2019-02-07 11:11         ` Thierry Reding
2019-01-25 11:25 ` [PATCH 5/5] phy: tegra: xusb: Add Tegra186 support Thierry Reding
2019-01-28  7:45   ` jckuo
2019-01-28  7:45     ` jckuo
2019-02-07 11:47   ` Kishon Vijay Abraham I
2019-02-07 11:47     ` Kishon Vijay Abraham I
2019-02-07 12:17     ` Thierry Reding
2019-01-28  7:04 ` [PATCH 1/5] dt-bindings: phy: tegra: " jckuo
2019-01-28  7:04   ` jckuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190128080054.GB18124@ulmo \
    --to=thierry.reding@gmail.com \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.