[PATCH v1 1/1] drm: drop drm_bus from todo

[PATCH v1 1/1] drm: drop drm_bus from todo

[Sam Ravnborg]

David Herrmann removed the last bits of drm_bus in:
c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")

Remove the todo item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
---
 Documentation/gpu/todo.rst | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 38360ede1221..d9515b17d36f 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days.
 Subsystem-wide refactorings
 ===========================
 
-De-midlayer drivers
--------------------
-
-With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
-to have a ``drm_bus`` structure set up. Drivers can directly set up the
-``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
-and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
-``->unload`` callbacks and open-code the load/unload sequence properly, using
-the new two-stage ``drm_device`` setup/teardown.
-
-Once all existing drivers are converted we can also remove those bus support
-files for USB and platform devices.
-
-All you need is a GPU for a non-converted driver (currently almost all of
-them, but also all the virtual ones used by KVM, so everyone qualifies).
-
-Contact: Daniel Vetter, Thierry Reding, respective driver maintainers
-
-
 Remove custom dumb_map_offset implementations
 ---------------------------------------------
 
-- 
2.12.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[David Herrmann]

Hey

On Sat, Jan 26, 2019 at 8:27 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> David Herrmann removed the last bits of drm_bus in:
> c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")
>
> Remove the todo item.
>
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: David Herrmann <dh.herrmann@gmail.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <maxime.ripard@bootlin.com>
> Cc: Sean Paul <sean@poorly.run>
> ---
>  Documentation/gpu/todo.rst | 19 -------------------
>  1 file changed, 19 deletions(-)

I miss drm_bus!

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

Thanks
David

> diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> index 38360ede1221..d9515b17d36f 100644
> --- a/Documentation/gpu/todo.rst
> +++ b/Documentation/gpu/todo.rst
> @@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days.
>  Subsystem-wide refactorings
>  ===========================
>
> -De-midlayer drivers
> --------------------
> -
> -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
> -to have a ``drm_bus`` structure set up. Drivers can directly set up the
> -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
> -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
> -``->unload`` callbacks and open-code the load/unload sequence properly, using
> -the new two-stage ``drm_device`` setup/teardown.
> -
> -Once all existing drivers are converted we can also remove those bus support
> -files for USB and platform devices.
> -
> -All you need is a GPU for a non-converted driver (currently almost all of
> -them, but also all the virtual ones used by KVM, so everyone qualifies).
> -
> -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers
> -
> -
>  Remove custom dumb_map_offset implementations
>  ---------------------------------------------
>
> --
> 2.12.0
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[Daniel Vetter]

On Sun, Jan 27, 2019 at 12:00:37PM +0100, David Herrmann wrote:
> Hey
> 
> On Sat, Jan 26, 2019 at 8:27 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> > David Herrmann removed the last bits of drm_bus in:
> > c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")
> >
> > Remove the todo item.
> >
> > Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> > Cc: David Herrmann <dh.herrmann@gmail.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Maxime Ripard <maxime.ripard@bootlin.com>
> > Cc: Sean Paul <sean@poorly.run>
> > ---
> >  Documentation/gpu/todo.rst | 19 -------------------
> >  1 file changed, 19 deletions(-)
> 
> I miss drm_bus!
> 
> Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

Sam, want drm-misc commit rights to start merging your own stuff? Assuming
you plan to stick around ofc ... I'll also ask the drm-misc maintainers
whether that's ok.

Thanks, Daniel

> 
> Thanks
> David
> 
> > diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> > index 38360ede1221..d9515b17d36f 100644
> > --- a/Documentation/gpu/todo.rst
> > +++ b/Documentation/gpu/todo.rst
> > @@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days.
> >  Subsystem-wide refactorings
> >  ===========================
> >
> > -De-midlayer drivers
> > --------------------
> > -
> > -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
> > -to have a ``drm_bus`` structure set up. Drivers can directly set up the
> > -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
> > -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
> > -``->unload`` callbacks and open-code the load/unload sequence properly, using
> > -the new two-stage ``drm_device`` setup/teardown.
> > -
> > -Once all existing drivers are converted we can also remove those bus support
> > -files for USB and platform devices.
> > -
> > -All you need is a GPU for a non-converted driver (currently almost all of
> > -them, but also all the virtual ones used by KVM, so everyone qualifies).
> > -
> > -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers
> > -
> > -
> >  Remove custom dumb_map_offset implementations
> >  ---------------------------------------------
> >
> > --
> > 2.12.0
> >

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[Sam Ravnborg]

Hi Daniel.

> 
> Sam, want drm-misc commit rights to start merging your own stuff? Assuming
> you plan to stick around ofc ... I'll also ask the drm-misc maintainers
> whether that's ok.

The plan is to re-submit the Atmel LCDC DRM driver when I find enough time
to finish it. All coding is done and it builds, I 'only' need to make it work.

When I submit the driver the plan is to share the maintainer role for
both Atmel based DRM drivers (hlcdc + lcdc).
So it would make sense to gain drm-misc commit rights at least then.

Last time I looked at it I was stucked in the keys required and the tools
I needed to learn. This was not really where I had energy to spend the effort.

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[Daniel Vetter]

On Tue, Jan 29, 2019 at 03:18:00PM +0100, Sam Ravnborg wrote:
> Hi Daniel.
> 
> > 
> > Sam, want drm-misc commit rights to start merging your own stuff? Assuming
> > you plan to stick around ofc ... I'll also ask the drm-misc maintainers
> > whether that's ok.
> 
> The plan is to re-submit the Atmel LCDC DRM driver when I find enough time
> to finish it. All coding is done and it builds, I 'only' need to make it work.
> 
> When I submit the driver the plan is to share the maintainer role for
> both Atmel based DRM drivers (hlcdc + lcdc).
> So it would make sense to gain drm-misc commit rights at least then.
> 
> Last time I looked at it I was stucked in the keys required and the tools
> I needed to learn. This was not really where I had energy to spend the effort.

Can I motivate you some more? I'm happy to ramp up people for a bit, but I
can't do patch review&applying for everyone. Wouldn't scale. Expect me to
become increasingly annoying about this :-)
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[Sean Paul]

On Tue, Jan 29, 2019 at 3:54 AM Daniel Vetter <daniel@ffwll.ch> wrote:
>
> On Sun, Jan 27, 2019 at 12:00:37PM +0100, David Herrmann wrote:
> > Hey
> >
> > On Sat, Jan 26, 2019 at 8:27 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> > > David Herrmann removed the last bits of drm_bus in:
> > > c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")
> > >
> > > Remove the todo item.
> > >
> > > Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> > > Cc: David Herrmann <dh.herrmann@gmail.com>
> > > Cc: David Airlie <airlied@linux.ie>
> > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > > Cc: Maxime Ripard <maxime.ripard@bootlin.com>
> > > Cc: Sean Paul <sean@poorly.run>
> > > ---
> > >  Documentation/gpu/todo.rst | 19 -------------------
> > >  1 file changed, 19 deletions(-)
> >
> > I miss drm_bus!
> >
> > Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
>
> Sam, want drm-misc commit rights to start merging your own stuff? Assuming
> you plan to stick around ofc ... I'll also ask the drm-misc maintainers
> whether that's ok.
>

Acked-by: Sean Paul <sean@poorly.run>

> Thanks, Daniel
>
> >
> > Thanks
> > David
> >
> > > diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> > > index 38360ede1221..d9515b17d36f 100644
> > > --- a/Documentation/gpu/todo.rst
> > > +++ b/Documentation/gpu/todo.rst
> > > @@ -10,25 +10,6 @@ graphics subsystem useful as newbie projects. Or for slow rainy days.
> > >  Subsystem-wide refactorings
> > >  ===========================
> > >
> > > -De-midlayer drivers
> > > --------------------
> > > -
> > > -With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
> > > -to have a ``drm_bus`` structure set up. Drivers can directly set up the
> > > -``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
> > > -and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
> > > -``->unload`` callbacks and open-code the load/unload sequence properly, using
> > > -the new two-stage ``drm_device`` setup/teardown.
> > > -
> > > -Once all existing drivers are converted we can also remove those bus support
> > > -files for USB and platform devices.
> > > -
> > > -All you need is a GPU for a non-converted driver (currently almost all of
> > > -them, but also all the virtual ones used by KVM, so everyone qualifies).
> > > -
> > > -Contact: Daniel Vetter, Thierry Reding, respective driver maintainers
> > > -
> > > -
> > >  Remove custom dumb_map_offset implementations
> > >  ---------------------------------------------
> > >
> > > --
> > > 2.12.0
> > >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v1 1/1] drm: drop drm_bus from todo

[Sam Ravnborg]

On Sun, Jan 27, 2019 at 12:00:37PM +0100, David Herrmann wrote:
> Hey
> 
> On Sat, Jan 26, 2019 at 8:27 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> > David Herrmann removed the last bits of drm_bus in:
> > c5786fe5f1c50941dbe27fc8b4aa1afee46ae893 ("drm: Goody bye, drm_bus!")
> >
> > Remove the todo item.
> >
> > Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> > Cc: David Herrmann <dh.herrmann@gmail.com>
> > Cc: David Airlie <airlied@linux.ie>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Cc: Maxime Ripard <maxime.ripard@bootlin.com>
> > Cc: Sean Paul <sean@poorly.run>
> > ---
> >  Documentation/gpu/todo.rst | 19 -------------------
> >  1 file changed, 19 deletions(-)
> 
> I miss drm_bus!
> 
> Reviewed-by: David Herrmann <dh.herrmann@gmail.com>

Applied and pushed to drm-misc-next

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel