[PATCH v3 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612

[PATCH v3 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612

[Ricardo Ribalda Delgado]

It is a driver for Texas Instruments Dual, 12-Bit Serial Input
Digital-to-Analog Converter.

Datasheet of this chip:
http://www.ti.com/lit/ds/sbas106/sbas106.pdf

Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
---
v3: Changes by Jonathan Cameron <jic23@kernel.org>

- Include OF compatible strings
- Rename RESOLUTION define
- Create defines for BIT positions
- Support DMA
- Rename gpio
- Remove scantype
- Fix scale
- Use iio_priv at variable definition
- (Ab)use ARRAY_SIZE for number of channels (love the idea)


 MAINTAINERS                  |   6 ++
 drivers/iio/dac/Kconfig      |  10 ++
 drivers/iio/dac/Makefile     |   1 +
 drivers/iio/dac/ti-dac7612.c | 173 +++++++++++++++++++++++++++++++++++
 4 files changed, 190 insertions(+)
 create mode 100644 drivers/iio/dac/ti-dac7612.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d039f66a5cef..30ba5435906b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14877,6 +14877,12 @@ F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
 F:	drivers/clk/keystone/sci-clk.c
 F:	drivers/reset/reset-ti-sci.c
 
+Texas Instruments' DAC7612 DAC Driver
+M:	Ricardo Ribalda <ricardo@ribalda.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	drivers/iio/dac/ti-dac7612.c
+
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index f28daf67db6a..fbef9107acad 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -375,6 +375,16 @@ config TI_DAC7311
 
 	  If compiled as a module, it will be called ti-dac7311.
 
+config TI_DAC7612
+	tristate "Texas Instruments 12-bit 2-channel DAC driver"
+	depends on SPI_MASTER && GPIOLIB
+	help
+	  Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB
+	  The driver hand drive the load pin automatically, otherwise
+	  it needs to be toggled manually.
+
+	  If compiled as a module, it will be called ti-dac7612.
+
 config VF610_DAC
 	tristate "Vybrid vf610 DAC driver"
 	depends on OF
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index f0a37c93de8e..1369fa1d2f0e 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o
 obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
 obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
 obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
+obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o
 obj-$(CONFIG_VF610_DAC) += vf610_dac.o
diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
new file mode 100644
index 000000000000..a2f58256a784
--- /dev/null
+++ b/drivers/iio/dac/ti-dac7612.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter
+ *
+ * Copyright 2019 Qtechnology A/S
+ * 2019 Ricardo Ribalda <ricardo@ribalda.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+
+#define DAC7612_RESOLUTION 12
+#define DAC7612_ADDRESS 4
+#define DAC7612_START 5
+
+struct dac7612 {
+	struct spi_device *spi;
+	struct gpio_desc *loaddacs;
+	uint16_t cache[2];
+
+	// DMA
+	uint8_t data[2] ____cacheline_aligned;
+};
+
+static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val)
+{
+	int ret;
+
+	priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS);
+	priv->data[0] |= val >> 8;
+	priv->data[1] = val & 0xff;
+
+	priv->cache[channel] = val;
+
+	ret = spi_write(priv->spi, priv->data, sizeof(priv->data));
+	if (ret)
+		return ret;
+
+	gpiod_set_value(priv->loaddacs, 1);
+	gpiod_set_value(priv->loaddacs, 0);
+
+	return 0;
+}
+
+#define dac7612_CHANNEL(chan, name) {				\
+	.type = IIO_VOLTAGE,					\
+	.channel = (chan),					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.datasheet_name = name,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec dac7612_channels[] = {
+	dac7612_CHANNEL(0, "OUTA"),
+	dac7612_CHANNEL(1, "OUTB"),
+};
+
+static int dac7612_read_raw(struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct dac7612 *priv;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		priv = iio_priv(iio_dev);
+		*val = priv->cache[chan->channel];
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int dac7612_write_raw(struct iio_dev *iio_dev,
+			     const struct iio_chan_spec *chan,
+			     int val, int val2, long mask)
+{
+	struct dac7612 *priv = iio_priv(iio_dev);
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2)
+		return -EINVAL;
+
+	if (val == priv->cache[chan->channel])
+		return 0;
+
+	mutex_lock(&iio_dev->mlock);
+	ret = dac7612_cmd_single(priv, chan->channel, val);
+	mutex_unlock(&iio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info dac7612_info = {
+	.read_raw = dac7612_read_raw,
+	.write_raw = dac7612_write_raw,
+};
+
+static int dac7612_probe(struct spi_device *spi)
+{
+	struct iio_dev *iio_dev;
+	struct dac7612 *priv;
+	int i;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	priv = iio_priv(iio_dev);
+	priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "loaddacs",
+						 GPIOD_OUT_LOW);
+	if (IS_ERR(priv->loaddacs))
+		return PTR_ERR(priv->loaddacs);
+	priv->spi = spi;
+	spi_set_drvdata(spi, iio_dev);
+	iio_dev->dev.parent = &spi->dev;
+	iio_dev->info = &dac7612_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->channels = dac7612_channels;
+	iio_dev->num_channels = ARRAY_SIZE(priv->cache);
+	iio_dev->name = spi_get_device_id(spi)->name;
+
+	for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
+		ret = dac7612_cmd_single(priv, i, 0);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(&spi->dev, iio_dev);
+}
+
+static const struct spi_device_id dac7612_id[] = {
+	{"ti-dac7612"},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, dac7612_id);
+
+static const struct of_device_id dac7612_of_match[] = {
+	{ .compatible = "ti,dac7612" },
+	{ .compatible = "ti,dac7612u" },
+	{ .compatible = "ti,dac7612b" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, dac7612_of_match);
+
+static struct spi_driver dac7612_driver = {
+	.driver = {
+		   .name = "ti-dac7612",
+		   .of_match_table = dac7612_of_match,
+		   },
+	.probe = dac7612_probe,
+	.id_table = dac7612_id,
+};
+module_spi_driver(dac7612_driver);
+
+MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>");
+MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH v3 2/2] iio:dac:dac7612: device tree bindings

[Ricardo Ribalda Delgado]

Bindings for dac7612.

Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
---
 .../bindings/iio/dac/ti,dac7612.txt           | 29 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt

diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
new file mode 100644
index 000000000000..e1b8158fab35
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -0,0 +1,29 @@
+* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
+
+The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
+12-bit monotonicity performance over the industrial temperature range.
+Is is programmable through an SPI interface.
+
+The internal DACs are loaded when the LOADDACS pin is pulled down.
+
+http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+
+Required Properties:
+- compatible: Should be one of:
+		"ti,dac7612"
+		"ti,dac7612u"
+		"ti,dac7612b"
+- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional Properties:
+- loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
+- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	dac7612@1 {
+		compatible = "ti,dac7612";
+		reg = <0x1>;
+		loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+	};
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 30ba5435906b..e28e5afaae16 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14882,6 +14882,7 @@ M:	Ricardo Ribalda <ricardo@ribalda.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/dac/ti-dac7612.c
+F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
-- 
2.20.1

Re: [PATCH v3 2/2] iio:dac:dac7612: device tree bindings

[Rob Herring]

On Mon, Jan 28, 2019 at 10:49:31AM +0100, Ricardo Ribalda Delgado wrote:
> Bindings for dac7612.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
> ---
>  .../bindings/iio/dac/ti,dac7612.txt           | 29 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> new file mode 100644
> index 000000000000..e1b8158fab35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -0,0 +1,29 @@
> +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
> +
> +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
> +12-bit monotonicity performance over the industrial temperature range.
> +Is is programmable through an SPI interface.
> +
> +The internal DACs are loaded when the LOADDACS pin is pulled down.
> +
> +http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +
> +Required Properties:
> +- compatible: Should be one of:
> +		"ti,dac7612"
> +		"ti,dac7612u"
> +		"ti,dac7612b"

What's the difference? I can only find 'u' and 'ub' variants and nothing 
about how those are different. So maybe just 1 string is enough?

> +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Optional Properties:
> +- loaddacs-gpios: GPIO descriptor for the LOADDACS pin.

Needs a 'ti' vendor prefix.

> +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +
> +	dac7612@1 {

dac@1

> +		compatible = "ti,dac7612";
> +		reg = <0x1>;
> +		loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
> +	};
> +
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 30ba5435906b..e28e5afaae16 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14882,6 +14882,7 @@ M:	Ricardo Ribalda <ricardo@ribalda.com>
>  L:	linux-iio@vger.kernel.org
>  S:	Supported
>  F:	drivers/iio/dac/ti-dac7612.c
> +F:	Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
>  
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>
> -- 
> 2.20.1
> 

Re: [PATCH v3 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612

[Jonathan Cameron]

On Mon, 28 Jan 2019 10:49:30 +0100
Ricardo Ribalda Delgado <ricardo@ribalda.com> wrote:

> It is a driver for Texas Instruments Dual, 12-Bit Serial Input
> Digital-to-Analog Converter.
> 
> Datasheet of this chip:
> http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> 
> Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Hi Ricardo,

Trivial bits inline I would have fixed, but seems we will be going for a v4
for the binding anyway!

Jonathan

> ---
> v3: Changes by Jonathan Cameron <jic23@kernel.org>
> 
> - Include OF compatible strings
> - Rename RESOLUTION define
> - Create defines for BIT positions
> - Support DMA
> - Rename gpio
> - Remove scantype
> - Fix scale
> - Use iio_priv at variable definition
> - (Ab)use ARRAY_SIZE for number of channels (love the idea)
> 
> 
>  MAINTAINERS                  |   6 ++
>  drivers/iio/dac/Kconfig      |  10 ++
>  drivers/iio/dac/Makefile     |   1 +
>  drivers/iio/dac/ti-dac7612.c | 173 +++++++++++++++++++++++++++++++++++
>  4 files changed, 190 insertions(+)
>  create mode 100644 drivers/iio/dac/ti-dac7612.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d039f66a5cef..30ba5435906b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14877,6 +14877,12 @@ F:	Documentation/devicetree/bindings/clock/ti,sci-clk.txt
>  F:	drivers/clk/keystone/sci-clk.c
>  F:	drivers/reset/reset-ti-sci.c
>  
> +Texas Instruments' DAC7612 DAC Driver
> +M:	Ricardo Ribalda <ricardo@ribalda.com>
> +L:	linux-iio@vger.kernel.org
> +S:	Supported
> +F:	drivers/iio/dac/ti-dac7612.c
> +
>  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>
>  L:	linux-media@vger.kernel.org
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index f28daf67db6a..fbef9107acad 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -375,6 +375,16 @@ config TI_DAC7311
>  
>  	  If compiled as a module, it will be called ti-dac7311.
>  
> +config TI_DAC7612
> +	tristate "Texas Instruments 12-bit 2-channel DAC driver"
> +	depends on SPI_MASTER && GPIOLIB
> +	help
> +	  Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB
> +	  The driver hand drive the load pin automatically, otherwise
> +	  it needs to be toggled manually.
> +
> +	  If compiled as a module, it will be called ti-dac7612.
> +
>  config VF610_DAC
>  	tristate "Vybrid vf610 DAC driver"
>  	depends on OF
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index f0a37c93de8e..1369fa1d2f0e 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o
>  obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
>  obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
>  obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
> +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o
>  obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
> new file mode 100644
> index 000000000000..a2f58256a784
> --- /dev/null
> +++ b/drivers/iio/dac/ti-dac7612.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter
> + *
> + * Copyright 2019 Qtechnology A/S
> + * 2019 Ricardo Ribalda <ricardo@ribalda.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +
> +#define DAC7612_RESOLUTION 12
> +#define DAC7612_ADDRESS 4
> +#define DAC7612_START 5
> +
> +struct dac7612 {
> +	struct spi_device *spi;
> +	struct gpio_desc *loaddacs;
> +	uint16_t cache[2];
> +
> +	// DMA
/* DMA */

But a slightly more detailed comment preferred.

> +	uint8_t data[2] ____cacheline_aligned;
> +};
> +
> +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val)
> +{
> +	int ret;
> +
> +	priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS);
> +	priv->data[0] |= val >> 8;
> +	priv->data[1] = val & 0xff;
> +
> +	priv->cache[channel] = val;
> +
> +	ret = spi_write(priv->spi, priv->data, sizeof(priv->data));
> +	if (ret)
> +		return ret;
> +
> +	gpiod_set_value(priv->loaddacs, 1);
> +	gpiod_set_value(priv->loaddacs, 0);
> +
> +	return 0;
> +}
> +
> +#define dac7612_CHANNEL(chan, name) {				\
> +	.type = IIO_VOLTAGE,					\
> +	.channel = (chan),					\
> +	.indexed = 1,						\
> +	.output = 1,						\
> +	.datasheet_name = name,					\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
> +}
> +
> +static const struct iio_chan_spec dac7612_channels[] = {
> +	dac7612_CHANNEL(0, "OUTA"),
> +	dac7612_CHANNEL(1, "OUTB"),
> +};
> +
> +static int dac7612_read_raw(struct iio_dev *iio_dev,
> +			    const struct iio_chan_spec *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct dac7612 *priv;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		priv = iio_priv(iio_dev);
> +		*val = priv->cache[chan->channel];
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1;
> +		return IIO_VAL_INT;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int dac7612_write_raw(struct iio_dev *iio_dev,
> +			     const struct iio_chan_spec *chan,
> +			     int val, int val2, long mask)
> +{
> +	struct dac7612 *priv = iio_priv(iio_dev);
> +	int ret;
> +
> +	if (mask != IIO_CHAN_INFO_RAW)
> +		return -EINVAL;
> +
> +	if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2)
> +		return -EINVAL;
> +
> +	if (val == priv->cache[chan->channel])
> +		return 0;
> +
> +	mutex_lock(&iio_dev->mlock);
> +	ret = dac7612_cmd_single(priv, chan->channel, val);
> +	mutex_unlock(&iio_dev->mlock);
> +
> +	return ret;
> +}
> +
> +static const struct iio_info dac7612_info = {
> +	.read_raw = dac7612_read_raw,
> +	.write_raw = dac7612_write_raw,
> +};
> +
> +static int dac7612_probe(struct spi_device *spi)
> +{
> +	struct iio_dev *iio_dev;
> +	struct dac7612 *priv;
> +	int i;
> +	int ret;
> +
> +	iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv));
> +	if (!iio_dev)
> +		return -ENOMEM;
> +
> +	priv = iio_priv(iio_dev);

Please add a comment here about why it's optional but we then use
it anyway (which is fine but none obvious!)

> +	priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "loaddacs",
> +						 GPIOD_OUT_LOW);
> +	if (IS_ERR(priv->loaddacs))
> +		return PTR_ERR(priv->loaddacs);
> +	priv->spi = spi;
> +	spi_set_drvdata(spi, iio_dev);
> +	iio_dev->dev.parent = &spi->dev;
> +	iio_dev->info = &dac7612_info;
> +	iio_dev->modes = INDIO_DIRECT_MODE;
> +	iio_dev->channels = dac7612_channels;
> +	iio_dev->num_channels = ARRAY_SIZE(priv->cache);
> +	iio_dev->name = spi_get_device_id(spi)->name;
> +
> +	for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
> +		ret = dac7612_cmd_single(priv, i, 0);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return devm_iio_device_register(&spi->dev, iio_dev);
> +}
> +
> +static const struct spi_device_id dac7612_id[] = {
> +	{"ti-dac7612"},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, dac7612_id);
> +
> +static const struct of_device_id dac7612_of_match[] = {
> +	{ .compatible = "ti,dac7612" },
> +	{ .compatible = "ti,dac7612u" },
> +	{ .compatible = "ti,dac7612b" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, dac7612_of_match);
> +
> +static struct spi_driver dac7612_driver = {
> +	.driver = {
> +		   .name = "ti-dac7612",
> +		   .of_match_table = dac7612_of_match,
> +		   },
> +	.probe = dac7612_probe,
> +	.id_table = dac7612_id,
> +};
> +module_spi_driver(dac7612_driver);
> +
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>");
> +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver");
> +MODULE_LICENSE("GPL v2");

Re: [PATCH v3 2/2] iio:dac:dac7612: device tree bindings

[Ricardo Ribalda Delgado]

Hi Rob

Thanks for your comments!

On Wed, Jan 30, 2019 at 6:07 PM Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Jan 28, 2019 at 10:49:31AM +0100, Ricardo Ribalda Delgado wrote:
> > Bindings for dac7612.
> >
> > Cc: devicetree@vger.kernel.org
> > Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
> > ---
> >  .../bindings/iio/dac/ti,dac7612.txt           | 29 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 30 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> >
> > diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > new file mode 100644
> > index 000000000000..e1b8158fab35
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> > @@ -0,0 +1,29 @@
> > +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
> > +
> > +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
> > +12-bit monotonicity performance over the industrial temperature range.
> > +Is is programmable through an SPI interface.
> > +
> > +The internal DACs are loaded when the LOADDACS pin is pulled down.
> > +
> > +http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> > +
> > +Required Properties:
> > +- compatible: Should be one of:
> > +             "ti,dac7612"
> > +             "ti,dac7612u"
> > +             "ti,dac7612b"
>
> What's the difference? I can only find 'u' and 'ub' variants and nothing
> about how those are different. So maybe just 1 string is enough?

dac7612 is how it is named on the datasheet commercial name.
dac7612u and dac7612ub being the variants. ub being slightly more
accurante. Shall I leave only 7612?
or keep the tree variants (fixing 7612b with 7612ub)?

Thanks!

>
> > +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> > +
> > +Optional Properties:
> > +- loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
>
> Needs a 'ti' vendor prefix.
>
> > +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
> > +
> > +Example:
> > +
> > +     dac7612@1 {
>
> dac@1
>
> > +             compatible = "ti,dac7612";
> > +             reg = <0x1>;
> > +             loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
> > +     };
> > +
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 30ba5435906b..e28e5afaae16 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -14882,6 +14882,7 @@ M:    Ricardo Ribalda <ricardo@ribalda.com>
> >  L:   linux-iio@vger.kernel.org
> >  S:   Supported
> >  F:   drivers/iio/dac/ti-dac7612.c
> > +F:   Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> >
> >  THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
> >  M:   Hans Verkuil <hverkuil@xs4all.nl>
> > --
> > 2.20.1
> >



-- 
Ricardo Ribalda