[PATCH AUTOSEL 3.18 01/14] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

[PATCH AUTOSEL 3.18 01/14] mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]

Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that
different instances are uniquely identified. This is required in order
to support registering of multiple instances of same ti_am335x_tscadc IP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ti_am335x_tscadc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 5726bf4e6c61..e8d5d171ab04 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -282,8 +282,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		cell->pdata_size = sizeof(tscadc);
 	}
 
-	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
-			tscadc->used_cells, NULL, 0, NULL);
+	err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+			      tscadc->cells, tscadc->used_cells, NULL,
+			      0, NULL);
 	if (err < 0)
 		goto err_disable_clk;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 02/14] mfd: twl-core: Fix section annotations on {,un}protect_pm_master

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from
the function twl_probe() to the function
.init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.

Remove the __init annotation on the *protect_pm_master functions so
there is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/twl-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index db11b4f40611..2608c1d86585 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -983,7 +983,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
  * letting it generate the right frequencies for USB, MADC, and
  * other purposes.
  */
-static inline int __init protect_pm_master(void)
+static inline int protect_pm_master(void)
 {
 	int e = 0;
 
@@ -992,7 +992,7 @@ static inline int __init protect_pm_master(void)
 	return e;
 }
 
-static inline int __init unprotect_pm_master(void)
+static inline int unprotect_pm_master(void)
 {
 	int e = 0;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 03/14] mfd: db8500-prcmu: Fix some section annotations

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]

When building the kernel with Clang, the following section mismatch
warnings appear:

WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of init_prcm_registers is wrong.

WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of fw_project_name is wrong.

db8500_prcmu_probe should not be marked as __init so remove the __init
annotation from fw_project_name and init_prcm_registers.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/db8500-prcmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..40a70e0c4d87 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2616,7 +2616,7 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static __init char *fw_project_name(u32 project)
+static char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
@@ -2765,7 +2765,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
 }
 
-static void __init init_prcm_registers(void)
+static void init_prcm_registers(void)
 {
 	u32 val;
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 04/14] mfd: ab8500-core: Return zero in get_register_interruptible()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]

This function is supposed to return zero on success or negative error
codes on error.  Unfortunately, there is a bug so it sometimes returns
non-zero, positive numbers on success.

I noticed this bug during review and I can't test it.  It does appear
that the return is sometimes propogated back to _regmap_read() where all
non-zero returns are treated as failure so this may affect run time.

Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ab8500-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index bde2fc072410..44ebb84c2e74 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -259,7 +259,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	mutex_unlock(&ab8500->lock);
 	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
 
-	return ret;
+	return (ret < 0) ? ret : 0;
 }
 
 static int ab8500_get_register(struct device *dev, u8 bank,
-- 
2.19.1

[PATCH AUTOSEL 3.18 05/14] mfd: wm5110: Add missing ASRC rate register

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/wm5110-tables.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 6ccc0fdab767..85eccd796a85 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -1617,6 +1617,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },    /* R3789  - HPLPF4_2 */
 	{ 0x00000EE0, 0x0000 },    /* R3808  - ASRC_ENABLE */
 	{ 0x00000EE2, 0x0000 },    /* R3810  - ASRC_RATE1 */
+	{ 0x00000EE3, 0x4000 },    /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },    /* R3824  - ISRC 1 CTRL 1 */
 	{ 0x00000EF1, 0x0000 },    /* R3825  - ISRC 1 CTRL 2 */
 	{ 0x00000EF2, 0x0000 },    /* R3826  - ISRC 1 CTRL 3 */
@@ -2684,6 +2685,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASRC_ENABLE:
 	case ARIZONA_ASRC_STATUS:
 	case ARIZONA_ASRC_RATE1:
+	case ARIZONA_ASRC_RATE2:
 	case ARIZONA_ISRC_1_CTRL_1:
 	case ARIZONA_ISRC_1_CTRL_2:
 	case ARIZONA_ISRC_1_CTRL_3:
-- 
2.19.1

[PATCH AUTOSEL 3.18 06/14] mfd: mc13xxx: Fix a missing check of a register-read failure

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]

When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mc13xxx-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 64dde5d24b32..b5c8e5fe6af6 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 
 	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	if (ret)
+		goto out;
 
 	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
-- 
2.19.1

[PATCH AUTOSEL 3.18 07/14] MIPS: ath79: Enable OF serial ports in the default config

[Sasha Levin]

From: Alban Bedel <albeu@free.fr>

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/configs/ath79_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 134879c1310a..4ed369c0ec6a 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -74,6 +74,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-- 
2.19.1

[PATCH AUTOSEL 3.18 08/14] scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]

The return code should be check while qla4xxx_copy_from_fwddb_param fails.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla4xxx/ql4_os.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d0cad6fc598e..a9fac1eb8306 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -7251,6 +7251,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha,
 
 	rc = qla4xxx_copy_from_fwddb_param(fnode_sess, fnode_conn,
 					   fw_ddb_entry);
+	if (rc)
+		goto free_sess;
 
 	ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
 		   __func__, fnode_sess->dev.kobj.name);
-- 
2.19.1

[PATCH AUTOSEL 3.18 09/14] scsi: isci: initialize shost fully before calling scsi_add_host()

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]

scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be.  Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.

However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.

The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")

Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:

  RIP: 0010:t10_pi_complete+0x77/0x1c0
  Call Trace:
    <IRQ>
    sd_done+0xf5/0x340
    scsi_finish_command+0xc3/0x120
    blk_done_softirq+0x83/0xb0
    __do_softirq+0xa1/0x2e6
    irq_exit+0xbc/0xd0
    call_function_single_interrupt+0xf/0x20
    </IRQ>

sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().

To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().

Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Intel SCU Linux support <intel-linux-scu@intel.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/init.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 2e890b1e2526..05b5747b7d41 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -598,6 +598,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
 	shost->max_lun = ~0;
 	shost->max_cmd_len = MAX_COMMAND_SIZE;
 
+	/* turn on DIF support */
+	scsi_host_set_prot(shost,
+			   SHOST_DIF_TYPE1_PROTECTION |
+			   SHOST_DIF_TYPE2_PROTECTION |
+			   SHOST_DIF_TYPE3_PROTECTION);
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
 	err = scsi_add_host(shost, &pdev->dev);
 	if (err)
 		goto err_shost;
@@ -685,13 +692,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			goto err_host_alloc;
 		}
 		pci_info->hosts[i] = h;
-
-		/* turn on DIF support */
-		scsi_host_set_prot(to_shost(h),
-				   SHOST_DIF_TYPE1_PROTECTION |
-				   SHOST_DIF_TYPE2_PROTECTION |
-				   SHOST_DIF_TYPE3_PROTECTION);
-		scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
 	}
 
 	err = isci_setup_interrupts(pdev);
-- 
2.19.1

[PATCH AUTOSEL 3.18 10/14] MIPS: jazz: fix 64bit build

[Sasha Levin]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]

64bit JAZZ builds failed with

  linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`:
  /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
    of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
    [-Werror=implicit-function-declaration]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
                                ^~~~~~~~~
                                CKSEG1ADDR
  /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
    integer of different size [-Werror=int-to-pointer-cast]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
            ^
  In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
                   from /linux-next/include/linux/compiler.h:248,
                   from /linux-next/include/linux/kernel.h:10,
                   from /linux-next/arch/mips/jazz/jazzdma.c:11:
  /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
    pointer to integer of different size [-Werror=pointer-to-int-cast]
   #define _ACAST32_  (_ATYPE_)(_ATYPE32_) /* widen if necessary */
                               ^
  /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
    expansion of macro `_ACAST32_`
   #define CPHYSADDR(a)  ((_ACAST32_(a)) & 0x1fffffff)
                           ^~~~~~~~~
  /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
    macro `CPHYSADDR`
    r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));

Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup
fixes this.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/jazz/jazzdma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index db6f5afff4ff..ea897912bc71 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -71,14 +71,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
 
 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();
 
-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
 
-- 
2.19.1

[PATCH AUTOSEL 3.18 11/14] isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.

isdn_tty_tiocmset
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and
my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/i4l/isdn_tty.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index bc912611fe09..b166354b8042 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1459,15 +1459,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
 
+	mutex_lock(&modem_info_mutex);
 	if (!old_termios)
 		isdn_tty_change_speed(info);
 	else {
 		if (tty->termios.c_cflag == old_termios->c_cflag &&
 		    tty->termios.c_ispeed == old_termios->c_ispeed &&
-		    tty->termios.c_ospeed == old_termios->c_ospeed)
+		    tty->termios.c_ospeed == old_termios->c_ospeed) {
+			mutex_unlock(&modem_info_mutex);
 			return;
+		}
 		isdn_tty_change_speed(info);
 	}
+	mutex_unlock(&modem_info_mutex);
 }
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 3.18 12/14] atm: he: fix sign-extension overflow on large shift

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]

Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits.  Fix this by shifting an
unsigned long.

Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/he.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index c39702bc279d..937f54ccbe6b 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)
 			instead of '/ 512', use '>> 9' to prevent a call
 			to divdu3 on x86 platforms
 		*/
-		rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
+		rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
 
 		if (rate_cps < 10)
 			rate_cps = 10;	/* 2.2.1 minimum payload rate is 10 cps */
-- 
2.19.1

[PATCH AUTOSEL 3.18 13/14] leds: lp5523: fix a missing check of return value of lp55xx_read

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]

When lp55xx_read() fails, "status" is an uninitialized variable and thus
may contain random value; using it leads to undefined behaviors.

The fix inserts a check for the return value of lp55xx_read: if it
fails, returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/leds-lp5523.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 9e1716f8098c..20e43f8b9325 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -313,7 +313,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		return ret;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {
-- 
2.19.1

[PATCH AUTOSEL 3.18 14/14] isdn: avm: Fix string plus integer warning from Clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]

A recent commit in Clang expanded the -Wstring-plus-int warning, showing
some odd behavior in this file.

drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
                cinfo->version[j] = "\0\0" + 1;
                                    ~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
                cinfo->version[j] = "\0\0" + 1;
                                           ^
                                    &      [  ]
1 warning generated.

This is equivalent to just "\0". Nick pointed out that it is smarter to
use "" instead of "\0" because "" is used elsewhere in the kernel and
can be deduplicated at the linking stage.

Link: https://github.com/ClangBuiltLinux/linux/issues/309
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/avm/b1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/avm/b1.c b/drivers/isdn/hardware/avm/b1.c
index 4d9b195547c5..df2a10157720 100644
--- a/drivers/isdn/hardware/avm/b1.c
+++ b/drivers/isdn/hardware/avm/b1.c
@@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo)
 	int i, j;
 
 	for (j = 0; j < AVM_MAXVERSION; j++)
-		cinfo->version[j] = "\0\0" + 1;
+		cinfo->version[j] = "";
 	for (i = 0, j = 0;
 	     j < AVM_MAXVERSION && i < cinfo->versionlen;
 	     j++, i += cinfo->versionbuf[i] + 1)
-- 
2.19.1